Stress analysis of horizontal mid-root fracture managed with different intraradicular fixation protocols: A 3D-finite element study.

The current study evaluated the stress distribution in a maxillary central incisor with mid-root fracture after splinting with different intra-radicular posts using 3D-finite element analysis (FEA). Five 3D-FEA models were constructed. Model 1 was an intact tooth with no fracture, Model 2: A tooth with a horizontal mid-root fracture, with no treatment. Model 3: Same as model 2, and intraradicular splinting using fiber post. Model 4: Same as model 2 and intra-radicular splinting using Protaper Gold file F3. Model 5: Same as model 2, and with intraradicular splinting with Ribbond. The FEA of all models was done to obtain the maximum Von-Mises stress in the root canal space, the dentin, the periodontal ligament, and the bone. The highest Von Mises stresses for the root canal space and the dentin were found in Model 3, followed by models 4, 5, and 2, and least in Model 1. The Von Mises stress of the periodontal ligament was the least in model 1. The Von Mises stress of bone was higher in all experimental models than in the baseline model. The results suggest that in cases where intra-radicular splinting is indicated, fiber posts and Ribbond are better alternatives to endodontic files due to the lower stresses exerted.

Removal of fiber posts using conventional versus guided endodontics: a comparative study of dentin loss and complications.

OBJECTIVES: To compare the efficacy of fiber post removal using conventional (CONV) versus guided endodontics (GE) in terms of dentin loss, residual resin material, procedural errors, and working time in vitro. MATERIAL AND METHODS: Ninety human central incisors were root-filled and scanned by micro-computed tomography (CT), then restored with fiber posts and composite. Twenty-four sets of teeth with up to four human maxillary central incisors were fabricated and divided into three groups: conventional post removal by a general dentist (CG) or endodontology specialist (CS) and guided endodontics (GE) by a general dentist, yielding 30 teeth per operator and group. After treatment, the prepared access cavities were volumetrically assessed by micro-CT. Statistical significance was evaluated by one-way analysis of variance followed by post hoc comparisons with Tukey's HSD test and Pearson's chi-squared test for independence. RESULTS: Both CONV and GE resulted in dentin loss and residual resin material. CS resulted in more dentin loss and less residual resin material than CG and GE (p < .05). All groups had some deviations from the original root canal but no perforations. The shortest working time was observed in the GE group. CONCLUSIONS: Compared to the conventional freehand technique, GE resulted in significantly less radicular dentin loss, a few deviations but no perforations. CLINICAL RELEVANCE: Guided endodontics can improve the speed and safety of fiber post removal without root perforation.

Glycolic acid on push-out bond strength of fiber post and smear removal: an in vitro study.

This study aims to investigate glycolic acid (GA) as a final irrigant on push-out bond strength of fiber post and smear removal. Ninety mandibular premolars were stabilized with a silicone key and photographed, and canal cross-section was calculated by image processing software. Round canal morphology was selected. The specimens were divided into five groups (n = 18); 10%GA, 17%EDTA, NaOCl + 10%GA, NaOCl + 17%EDTA, and the control. Fifteen specimens were used for the push-out. Three specimens were evaluated using a scanning electron microscope after post space preparation. Two-way ANOVA and Chi-square were used for statistics. GA presented higher strength than EDTA (p < 0.05). The NaOCl + GA showed higher strength than the NaOCl + EDTA (p < 0.05). The highest values were observed in cervical and lowest in apical thirds (p < 0.05). The most failure type was between dentin and resin (p < 0.05). GA removed the smear in the post space including the apical third. The NaOCl + GA has superiority to NaOCl + EDTA on push-out strength. Glycolic acid improved the bond strength of fiber post when used as a final post space irrigant. The combination of NaOCl and glycolic acid did not negatively affect the bond strength and was more effective compared to the combination with EDTA. Glycolic acid improved the bond strength of fiber post when used as a final post space irrigant. The combination of NaOCl and glycolic acid did not negatively affect the bond strength and was more effective compared to the combination with EDTA.

Clinical and laboratorial performance of rehabilitation of endodontically treated teeth: A systematic review.

OBJECTIVE: This systematic review aimed to analyze the clinical (survival rate, failure risk, or fracture) and laboratory performance (fracture mode or failure) of rehabilitations of endodontically treated teeth, with and without posts. MATERIALS AND METHODS: A systematic search was conducted in the Pubmed, Scopus, Web of Science, Embase, Cochrane Library, and OpenGrey databases up to March 2023, according to PRISMA guidelines. In vitro and clinical studies that compared the clinical and laboratory performance of endodontically treated teeth with and without intraradicular posts were included. Studies selection, data extraction, and risk of bias analysis were performed. RESULTS: Thirty-one in vitro and 7 clinical studies were included. For in vitro studies, fiberglass post (n = 24) was the most mentioned. The follow-up time of the clinical studies ranged from 1 to 17 years, with the fiber-reinforced composite post (n = 3) being the most evaluated, and only failure risk proved to be more favorable for using intraradicular posts. CONCLUSION: Rehabilitations of endodontically treated teeth with and without intraradicular retainers showed no difference in fracture resistance and failure mode, evaluated by in vitro studies. Clinical studies showed no difference in survival rate, but failure risk proved to be more favorable for the use of posts. CLINICAL SIGNIFICANCE: This analysis revealed significant variability between results, however, most laboratory and clinical studies revealed no difference with using the post. Furthermore, it is important to emphasize the need to evaluate the coronary remnant and the general characteristics of the tooth in each situation.

Fiber post cemented using different adhesive strategies to root canal dentin obturated with calcium silicate-based sealer.

BACKGROUND: Calcium silicate-based sealer has favorable properties for root canal filling, including hydroxyapatite formation during the setting process. However, this process can cause difficulty during post space preparation when the sealer is set. Additionally, the remaining sealer could interfere with the bond strength of fiber post to root canal dentin. The different adhesive strategies and fiber post cementation time may affect the bond strength of the fiber post. Thus, the objective of this study was to evaluate the effect of etching modes of Scotchbond™ Universal Plus adhesive and post cementation time on the push-out bond strength of a fiber post cemented in root canals obturated with calcium silicate-based sealer. METHODS: Fifty-four teeth were randomly allocated to 6 groups (n = 9) based on etching modes: self-etch (SE) or etch-and-rinse (ER); post space preparation and cementation time: immediate (Im) or 7-day delayed (De): Im-Im, Im-De, and De-De. The root canals were obturated with calcium silicate-based sealer and the post space preparation was performed. The fiber post was cemented using RelyX™ Universal resin cement according to each group's design. For the push-out bond strength test, 1-mm slices of the coronal, middle, and apical regions were tested using a universal testing machine. The failure mode analysis was determined using a stereomicroscope. The data was analyzed with three-way analysis of variance. RESULTS: No negative effects of etching modes, post space preparation or cementation time on push-out bond strength were detected (p > 0.05). Additionally, the root canal region also did not significantly affect the bond strength (p > 0.05). CONCLUSION: No significant differences were observed between the etching modes, post space preparation and cementation time and among root canal regions. CLINICAL RELEVANCE: The different etching modes of adhesive and post cementation time did not affect the bond strength of fiber post in calcium silicate filled-root canal.

Comparative analysis of stress distribution in residual roots with different canal morphologies: evaluating CAD/CAM glass fiber and other post-core materials.

BACKGROUND: The selection of post-core material holds significant importance in endodontically treated teeth, influencing stress distribution in the dental structure after restoration. The use of computer-aided design/computer-aided manufacturing (CAD/CAM) glass fiber post-core possesses a better adaptation for different root canal morphologies, but whether this results in a more favorable stress distribution has not been clearly established. MATERIALS AND METHODS: This study employed finite element analysis to establish three models of post-core crown restoration with normal, oversized, and dumbbell-shaped root canals. The three models were restored using three different materials: CAD/CAM glass fiber post-core (CGF), prefabricated glass fiber post and resin core (PGF), and cobalt-chromium integrated metal post-core (Co-Cr), followed by zirconia crown restoration. A static load was applied and the maximum equivalent von Mises stress, maximum principal stress, stress distribution plots, and the peak of maximum displacement were calculated for dentin, post-core, crown, and the cement acting as the interface between the post-core and the dentin. RESULTS: In dentin of three different root canal morphology, it was observed that PGF exhibited the lowest von Mises stresses, while Co-Cr exhibited the highest ones under a static load. CGF showed similar stress distribution to that of Co-Cr, but the stresses were more homogeneous and concentrated apically. In oversized and dumbbell-shaped root canal remnants, the equivalent von Mises stress in the cement layer using CGF was significantly lower than that of PGF. CONCLUSIONS: In oversized root canals and dumbbell-shaped root canals, CGF has shown good performance for restoration of endodontically treated teeth. CLINICAL RELEVANCE: This study provides a theoretical basis for clinicians to select post-core materials for residual roots with different root canal morphologies and should help to reduce the occurrence of complications such as root fracture and post-core debonding.

Comparative Evaluation of Fracture Resistance in Different Post and Core Systems with Varying Ferrule Locations: An In Vitro Study.

AIM: Endodontically treated teeth often require 360° ferrule to retain post and core restoration. The literature support on scientific evidence of partial ferrule is limited, hence this study was conducted to evaluate the fracture resistance of two post and core systems, i.e., Edelweiss and glass fiber post and core system with varying ferrule locations. MATERIALS AND METHODS: About 54 extracted mandibular 1st premolars were divided into Edelweiss post and core (Group A) and glass fiber post and core (Group B). They were further subdivided into 3 groups each (Partial functional, partial non-functional, and circumferential). A standardized endodontic procedure was carried out on all the specimens. For group A, an Edelweiss drill of 1.4 mm was used to prepare the post space. Canals were then etched, a bonding agent was applied and posts were luted with paracore resin. For group B, post space was prepared with a straight fissure bur, followed by the same procedure as that of group A. Core build-up was done with composite resin. Cast crowns were fabricated and cemented with GIC. Fracture resistance was evaluated with UTM with a compressive load capacity of 1000 N until fracture occurred. RESULTS: The results of this study stated that in the Edelweiss group partial functional ferrule showed higher fracture resistance and in the glass fiber group circumferential ferrule showed higher fracture resistance. The study also showed that MOF is favorable in all the groups. CONCLUSION: The type of ferrule was one of the factors that affected the fracture resistance of Edelweiss and Glass fiber post and core group of specimens. The study also concluded that there was a predominant favorable mode of fracture across all groups, in all different ferrule locations. CLINICAL SIGNIFICANCE: This study opens multiple avenues and methods in tooth restoration and shows that even a partial functional ferrule is sufficient for restoration, provided the right system is used. How to cite this article: Jadhav PD, Shetty R, Mehta D, et al. Comparative Evaluation of Fracture Resistance in Different Post and Core Systems with Varying Ferrule Locations: An In Vitro Study. J Contemp Dent Pract 2024;25(5):480-485.

Removal Efficiency and Effectiveness of Four Different Fiber Posts Using Five Different Drill Systems in Multirooted Teeth.

AIM: In comparing the effectiveness and efficiency of different types of post removal systems in removing different types of fiber posts (FPs), this study aims to shed light on the success of removal by currently available drill systems. MATERIALS AND METHODS: A total of 200 maxillary first molars, were root canal treated and prepared to receive posts. The molars were divided into four groups corresponding to four different FPs: Group RX, Radix FP; Group RF, Reforpost Glass Fiber; Group HI; Hi-Rem Endodontic Post; and Group DT, D.T. Light-Post Illusion X-RO. Fiber posts were done with luting by Gradia Core (GC America, Inc.). Groups were again divided into five subgroups corresponding to the technique by which the FP was removed into as follows: Subgroup P, PD-25-1.1 Drill; subgroup G, GC FP Drill; subgroup E, EasyPost Precision Drill; subgroup R, Reaccess Carbide Double Taper Kit; and subgroup H; H-Endodontic Drill. After posts were removed, effectiveness and efficiency were documented. Data were tabulated and statistically analyzed. RESULTS: Strong significant differences regarding efficiency among groups (FP type) and subgroups (drills used) (p = 0.00) were shown by the one-way analysis of variance (ANOVA) test. Subgroup DT-G scored the longest mean removal time (20.9 minutes) while Subgroup RX-R scored the shortest mean removal time (1.4 minutes) Regarding effectiveness, strong significant differences among groups (p = 0.00) and subgroups (p = 0.00) were shown by one-way ANOVA. Subgroup RF-G scored the highest scale (5.2) whereas subgroup HI-R scored the lowest mean scale (1.2). CONCLUSION: The difference was strongly significant between tested post-removal kits and between tested FPs. Re-access Carbide Double Taper Kit performed superiorly in both effectiveness and efficiency, followed by PD-25-1.1 Drill. Hi-Rem post showed the best retrieving results among other FPs. CLINICAL SIGNIFICANCE: Knowing the best technique and tools for post removal could spare the practitioner any unwanted complications during post removal. How to cite this article: Sayed M, Alahmad AM, Alhajji KS, et al. Removal Efficiency and Effectiveness of Four Different Fiber Posts Using Five Different Drill Systems in Multirooted Teeth. J Contemp Dent Pract 2024;25(1):72-78.

Effect of irrigation acid solutions on cleaning and bond strength to post-space dentin.

This study evaluated the effects of irrigating solutions containing 5% boric acid + 1% citric acid or 1% peracetic acid + high concentration hydrogen peroxide on root cleaning and bond strength of cementation systems after 24 h and 6 months of glass fiber post cementation. One hundred and twenty roots were endodontically treated. The specimens were randomized into one of four treatments (n = 10): DW (distilled water); NaOCl2.5% + EDTA17% (2.5% sodium hypochlorite solution + 17% EDTA); PA1% + HP (1% peracetic acid solution + high concentration of hydrogen peroxide); BA5% + CA1% (5% boric acid associated with 1% citric acid). The cleaning efficacy in the cervical, middle, and apical thirds of the post-space, and the push-out bond strength at 24 h and 6 months after post cementation were evaluated by Kruskal-Wallis and two-way ANOVA tests, respectively. BA5% + CA1% showed statistically significantly superior cleaning efficacy compared to the other solutions. This irrigation protocol also resulted in higher bond strength at 24 h and 6 months, regardless of the root third considered, and this was statistically significantly higher than those seen for DW and PA1% + HP. For BA5% + CA1% irrigation protocol, type 1 adhesive failure was the most prevalent. Post-space irrigation with BA5% + CA1% provided both higher cleaning efficacy and better bond strength.

Survival rate and treatment success of glass fiber posts cemented with two adhesive cementation strategies after up to 106 months: a randomized clinical trial.

OBJECTIVES: The objective of this study is to evaluate the longevity of two fiber post cementation strategies in a prospective, multicenter, non-inferiority, double-blind randomized controlled trial. METHODS: A total of 152 teeth, with adequate endodontic treatment and loss of coronal structure and bilateral simultaneous posterior occlusal contacts, were randomly allocated to receive glass fiber posts cemented with a conventional cementation strategy (CRC group: adhesive system + resin cement) (Adper Single Bond + RelyX ARC; 3 M-ESPE) or a self-adhesive cementation strategy (SRC group: self-adhesive resin cement; RelyX U100/U200; 3 M-ESPE). The patients were recalled annually for clinical and radiographical evaluation with a 93% recall rate (142 teeth, with 74 at CR groups and 68 at SRC group). The primary outcome was survival rate, considering the fiber post debonding (loss of retention). The secondary outcome included the success rate of the prosthetic treatment with crown debonding, post fracture, and tooth loss (not related to post failure). Both outcomes were evaluated annually. The Kaplan-Meier method and Cox regression with 95% confidence interval were used for the statistical analysis. RESULTS: For the primary outcome (failures directly related to fiber posts cementation strategy), there were 4 fiber post debondings (2 per group), 8 root fractures (3 for SRC group and 5 for CRC group), and one mixed failure (debonding combined with root fracture for CRC), with both strategies presenting similar survival rates (p = 0.331), with 88.9% for the CRC group and 90.9% for the SRC group. For the secondary outcome (failures not related to fiber post cementation strategies), there were 8 crown debondings, 3 post fractures, and 3 tooth losses, with no statistically difference between groups (p = 0.701), with 77% for SRC and 82% for CRC. CONCLUSION: Fiber post cementation strategies with conventional or self-adhesive resin cement presents similar tooth survival and success rates. TRIAL REGISTRATION: NCT01461239 CLINICAL RELEVANCE: Both adhesive cementation strategies led to high survival and success rates and are indicated for fiber post cementation, even after a long follow-up period (up to 106 months).

Fatigue performance of endodontically treated molars reinforced with different fiber systems.

OBJECTIVE: The aim was to investigate the fatigue performance of root canal-treated (RCT) molars restored with different direct restorations utilizing discontinuous and continuous fiber-reinforced composite (FRC) systems. The impact of direct cuspal coverage was also evaluated. MATERIALS AND METHODS: One hundred and twenty intact third molars extracted for periodontal or orthodontic reasons were randomly divided into six groups (n=20). Standardized MOD, regular cavities for direct restorations were prepared in all specimens, and subsequently, root canal treatment and root canal obturation was carried out. After the endodontic treatment, the cavities were restored with different fiber-reinforced direct restorations as follows: SFC group (control), discontinuous short fiber-reinforced composite (SFC) without cuspal coverage (CC); SFC+CC group, SFC with cuspal coverage; PFRC group, transcoronal fixation with continuous polyethylene fibers without CC; PFRC+CC group, transcoronal fixation with continuous polyethylene fibers with CC; GFRC group, continuous glass FRC post without CC; and GFRC+CC, continuous glass FRC post with CC. All specimens underwent a fatigue survival test in a cyclic loading machine until fracture occurred or 40,000 cycles were completed. The Kaplan-Meier survival analysis was conducted, followed by pairwise log-rank post hoc comparisons between the individual groups (Mantel-Cox). RESULTS: The PFRC+CC group was characterized by significantly higher survival compared to all the groups (p < 0.05), except for the control group (p = 0.317). In contrast, the GFRC group showed significantly lower survival compared to all the groups (p < 0.05), except for the SFC+CC group (p = 0.118). The control group (SFC) showed statistically higher survival than the SFRC+CC group (p < 0.05) and GFRC group (p < 0.05), but it did not differ significantly from the rest of the groups in terms of survival. CONCLUSIONS: Direct restorations utilizing continuous FRC systems (in the form of polyethylene fibers or FRC post) to restore RCT molar MOD cavities performed better in terms of fatigue resistance when CC was performed compared to the same FRC restorations without CC. On the contrary, teeth restored with SFC restorations performed better without CC compared to the ones where SFC was covered. CLINICAL RELEVANCE: In the case of fiber-reinforced direct restorations for MOD cavities in RCT molars, direct CC is recommended when utilizing long continuous fibers for reinforcement, however, should be avoided when only SFC is used for their reinforcement.

Etch-and-rinse versus self-etch strategy of a universal adhesive in different application methods at the bonding interface of fiber post cementation.

OBJECTIVE: To evaluate the effect of etch-and-rinse (ER) versus self-etch (SE) strategies of a universal adhesive applied with a manual brush (MB) or rotary brush (RB) on the bonding interface of fiber post cementation. METHODS: Forty bovine incisor roots were prepared and divided into four groups according to the methods of application and strategy of universal adhesive use (MB-ER, RB-ER, MB-SE and RB-SE). After 6 months, specimens from different thirds of the post space were evaluated of push-out strength, analysis of adhesive failure patterns, and extent of tags. RESULTS: The RB-ER and RB-SE groups showed the highest bond strength values in the cervical and middle thirds of the post space. Cohesive adhesive failure had the highest incidence in the different thirds of the post space in the ER strategy, regardless of the adhesive application method. The RB-ER group showed the highest tag extensions. CONCLUSIONS: The protocols of universal adhesive application with RB provided the greater bond strength, but only the ER strategy favored the formation of a greater extension of tags at the adhesive interface. CLINICAL SIGNIFICANCE: The application of universal adhesive with RB into the post space increases the strength of the post-cemented fiber bond.

Effect of antioxidants after post-space irrigation on the adhesive interface of glass fiber post cementation.

OBJECTIVE: This study evaluated the effects of antioxidants, 10% sodium ascorbate (SA) or 20% alpha-tocopherol (AT), after post-space irrigation with 2.5% sodium hypochlorite +17% EDTA (SH) or 1% peracetic acid (PA) on the adhesive interface after glass fiber post cementation. MATERIALS AND METHODS: Sixty bovine roots were endodontically treated. After preparation, the post-space was irrigated with SH or PA followed or not by the use of antioxidants (SA or AT) (n = 10). Push-out bond strength test, failure mode, and dentin penetrability analysis using confocal laser microscope were performed in the cervical, middle, and apical thirds. Data from bond strength and dentinal penetrability were evaluated by one-way ANOVA and Tukey post hoc test (p < 0.05). RESULTS: SH showed the lowest bond strength regardless of the third (p < 0.05). In apical third, mixed failure was the most incident in all groups. Only in the cervical third of the post-space, SH-AT provided the greatest tag extension of the cementation system into dentin (p < 0.05). However, in the middle and apical thirds, SH-AT, SH-SA, and PA-SA provided the largest tag extensions (p < 0.05), but similar to each other (p > 0.05). CONCLUSIONS: The use of antioxidants only favored bond strength when SH was used and dentin penetrability of the adhesive and conventional resin cementation, regardless of the solution used to irrigate the post-space. CLINICAL SIGNIFICANCE: The use of antioxidants (10% sodium ascorbate and 20% alpha-tocopherol) after post-space irrigation with sodium hypochlorite appears to increase the bond strength favoring the glass fiber post-cementation.

Effect of silver diamine fluoride activation on bond strength to root dentin.

BACKGROUND: To investigate the effect of silver diamine fluoride (SDF) application and activation on the bond strength of gutta-percha to dentin and resin bonded post to dentin. METHODS: Thirty-six human premolar teeth were used. The coronal part tooth was removed, and endodontic mechanical preparation was performed for all the teeth. The teeth were divided according to final rinse protocol (n = 9) as follows: Control group; no SDF application, SDF/NA; 38% SDF as a final rinse with no activation, SDF/MDA; 38% SDF as a final rinse with manual dynamic activation and SDF/US; 38% SDF as a final rinse with ultrasonic activation. Root canal obturation using lateral condensation technique followed by fiber post insertion after 48 h in the root canal after corresponding preparations. The roots were cut with a low-speed precision saw creating 2 mm thickness sections. A total of 4 sections were obtained from each tooth, 2 coronal specimens (with post) and 2 apical specimens (with Gutta percha). Each specimen was subjected to push-out bond strength test with a universal testing machine. Data were analyzed using two-way ANOVA. RESULTS: The Push-out bond strength at the apical root section was significantly higher in SDF/MDA and SDF/US groups compared to control group. While for the coronal part, all SDF treated specimen showed reduced Push-out bond strength. CONCLUSION: SDF application as final rinse may reduce the bonding performance between fiber post and dentine. Activation with manual and ultrasonic methods improved the bond strength at the apical root section.

The influence of Zirconia and Fiber posts with different lengths on Fracture strength of Maxillary Central Incisors restored with zirconia crowns - An in vitro study.

PURPOSE: Endodontically treated teeth are more susceptible to fractures than vital teeth because of significant coronal and radicular dentin loss during endodontic therapeutic procedures. The objective of this study was to estimate and compare the influence of length and post type on the fracture strength of endodontically treated maxillary central incisors. MATERIAL AND METHODS: In this in vitro study, sixty extracted human maxillary central incisors were decoronated 2 mm above the cemento-enamel junction.They were selected and subjected to standard endodontic treatment ,resulting in preparation with lengths of 5 mm (group 5mm),7,5 mm (group 7,5 mm) and 10 mm (group 10mm). Each group was randomly divided into 2 subgroups according to the post type , zirconia and fiber post. After appropriate surface treatment,they were cementet with resin adhesive cement and restored with zirconia crowns. Thermocycling (5 -55°C, 60 seconds, 1500 cycles) was performed after cementing the zirconia crowns on each tooth. Prepared samples were subjected to compresive static load of 0.5mm / min, at an angle of 130° to the long axis of the roots, using Universal Testing Machine (Matest ) at an cross head speed of 0.5 mm / min, until fracture.The significance of the results was assessed using 2-way ANOVA and the Tukey-Kramer test (α=0.05) Results:The ANOVA analysis indicated significant differences (P<0.05) between the groups. Tukey test revealed no significant difference among the zirconia posts of 5-mm length (26.5 N ±13.4) 7,5-mm length (25.2 N ±13.9), and 10-mm length (17.1 N ±5.2). Also, in the fiber post group, there was no significant difference when posts of 7.5-mm length (13.4 N ±11.0) were compared with the 5-mm (6.9 N ±4.6) and 10-mm (31.7 N ±13.1) groups. The 10-mm long post displayed superior fracture strength, and the 5mm-long post showed significantly lower mean values (P<0.001). CONCLUSION: The fracture strength of zirconia posts (5-mm and 7,5- mm length)was found to be significantly higher than those of fiber posts (5-mm and 7,5- mm length). The 10-mm long fiberpost group demonstrated significantly higher values of fracture strengths and the 5-mm long fiberpost group showed the lowest values for the force resulting in root fracture; these groups were significantly different from each other (P<.001).The fracture strength analysis with Universal Testing Machine is the only method that enables us to estimate the differences between zirconia and fiber posts with different lengths on endodontically treated teeth.

A three-dimensional printed assembled sleeveless guide system for fiber-post removal.

This report describes a technique to develop a three-dimensional printed assembled sleeveless guide system to aid the fiber-post removal in a safe and efficient way. The surface and volume data of the dentition containing the targeted tooth were acquired with optical scanners and cone-beam computed tomography. The virtual path of the fiber-post removal was determined and integrated with a guide prototype with a cylindrical passage. The prototype data was split into two separate parts, combined with the matched pin and jack structures to facilitate the assembly. A guide tube was generated based on the axis of the cylindrical passage, split into three units, and combined with the previously processed data with connectors to form the finalized guide system. The adaptor for the head of handpiece was designed to facilitate the guidance. All the finalized data were printed with titanium alloy. The fiber-post of the upper right central incisor was successfully removed with the aid of this assembled sleeveless guide system that guides the handpiece rather than the rotary instrument.

Effect of silicone-based sealers on fiber post retention: An in vitro study.

PURPOSE: The effect of a silicone-based sealer on fiber post retention has not been the subject of research and remains unclear. This study aimed to evaluate and compare the impact of a silicone-based sealer and an epoxy resin sealer on fiber post retention. MATERIAL AND METHODS: Forty extracted human mandibular premolars that were caries-free, single-rooted, and possessed straight single canals were the specimens of the present study. Teeth were randomly divided into two groups (n = 20 each). All specimens were prepared using gutta-percha. The sealer used in the first group was Guttaflow 2, while AH26 was used in the second group. Post spaces were prepared immediately after obturation for each specimen. Prefabricated fiber posts were luted in both groups using a self-adhesive resin cement (RelyX-U200). Each specimen was vertically secured using a universal testing machine (Instron Corp.) and a constant pull-out force at a loading rate of 0.5 mm/min was applied until the point of dislodgement. Data were analyzed using t-tests. RESULTS: A significant difference was found between the mean of maximum loads of the silicone-based sealer and epoxy resin sealer groups (p = 0.0001). The mean maximum load for the epoxy resin sealer group was 194.62 N, while that for the silicone-based sealer group was 111.64 N. CONCLUSION: Fiber post retention in teeth obturated using silicone-based sealer was inferior to that in teeth obturated with epoxy resin sealer. Therefore, the sealer used during obturation can significantly affect fiber post retention.

Fracture strength of flared root canals reinforced using different post and core materials.

PURPOSE: To examine the fracture strength and fracture mode of flared root canals reinforced with different post and core materials. MATERIALS AND METHODS: Forty endodontically treated bovine teeth structured to mimic human mandibular premolars with flared root canals were reinforced with resin composite and glass fiber post (FRC), composite resin (RC), ceramic core (LD), and ceramic core with resin composite reinforcement (RLD), and restored with single zirconia crowns (n = 10 in each group). The fracture strength and mode of the root canals restored with zirconia crown were assessed. The fracture strength was compared with a one-way analysis of variance (ANOVA) following Tukey HSD tests. A multiple regression analysis was conducted to test the effect of the post/core materials on the fracture loads. Fisher's exact test was used in the failure mode analysis. RESULTS: The mean fracture strength of RLD was significantly higher than RC, FRC, and LD (p < 0.05), while no significant differences were found among RC, FRC, and LD (p < 0.05). The regression analysis found that the fracture strength using the lithium disilicate was significantly lower for the post and higher for the core than that using the resin composite (p < 0.05), and there were no significant difference in the fracture strengths between the resin composite and glass fiber used for the post (p > 0.05). Most of the specimens exhibited root fractures, and no significant differences were observed among the groups (p < 0.05). CONCLUSIONS: The results of this study suggest that reinforcement of flared root canals using a combination of resin composite for the core and lithium disilicate ceramic for the post is superior to resin composite and glass fiber in mechanical properties when restoring a single crown.

Influence of the Fiber Post Length on the Fracture Strength of Endodontically Treated Teeth.

Background and Objectives: Although fiber posts are widely used in the restoration of endodontically treated teeth (ETT), their ideal cementation depth into the root canal is still debated in literature. The aim of the present study was to evaluate whether the different intra-radicular insertion lengths of the fiber posts influence the fracture strength of ETT. Materials and Methods: A total of 10 permanent human lower incisors with straight roots of similar length and volume extracted for periodontal reason were sectioned 2 mm above the cement-enamel junction (CEJ) to a total length of 18 mm and endodontically treated in the same manner, then randomly divided into two groups of five each (Groups 1 and 2, n = 5). Two sound incisors, with no endodontic treatment, were used as the control group (Group 3, n = 2). After one week of storage in a humid environment, spaces for fiber post no. 1 (Reforpost, Angelus, Londrina, PR, Brazil) were prepared in the first two groups at a depth of 5 mm (Group 1) and 7 mm (Group 2), and the fiber posts were adhesively cemented using self-adhesive resin cement (Maxcem Elite, Kerr GmbH, Herzogenrath, Germany). After 7 days, the samples were vertically positioned and fixed in a self-curing transparent acrylic resin, up to 2 mm below the CEJ level, and mechanically tested in compression after another week of storage using a displacement-controlled testing machine up to each sample's fracture. The force-displacement curves were recorded for each sample, the means were calculated for each group and a statistical comparative analysis between groups was conducted. Results: Although no statistically significant differences between groups were observed, the highest mean fracture force (N) was recorded in Group 2 (1099.41 ± 481.89) in comparison to Group 1 (985.09 ± 330.28), even when compared to the sound, non-treated teeth (1045.69 ± 146.19). Conclusions: Within the limitations of this in vitro study, teeth where fiber posts were placed deeper into the root canal (7 mm) recorded slightly higher fracture forces in comparison with shorter lengths (5 mm). However, similar biomechanical performances obtained in the mechanical tests showed no statistical differences between the 7 mm and the 5 mm inserted posts.

Effect of chlorhexidine and benzalkonium chloride on the long-term push-out bond strength of fiber posts.

Background and Aim: Fiber posts are widely used in endodontically treated teeth with extensive loss of coronal structure. The purpose of this study was to investigate immediate and the long-term effects of chlorhexidine (CHX) and benzalkonium chloride (BAC) application, on the push-out bond strength of fiber posts. Material and Methods: Sixty mandibular premolars were decoronated, and root canal treatment was performed. After post space preparation, the specimens were divided into three groups according to the post space-surface pretreatment (n = 20); no surface treatment (control group-Group 1), 2% CHX application (Group 2), and 1% BAC application (Group 3). A self-curing adhesive cement and an etch and rinse adhesive were used for the cementation of posts. Three sections (one cervical, one middle, and one apical) of 1 mm thickness were prepared from each specimen. A push-out test was performed immediately on the half of the specimen sections (n = 10). The other half of the specimen sections were subjected to 20.000 thermal cycles before applying the push-out test (n = 10). The failure mode of each specimen was observed under a stereomicroscope at ×40 magnification. Results: The data were analyzed by one-way analysis of variance (ANOVA), Tukey Honestly significant difference (HSD), and Tamhane tests (P = 0.05). The cervical thirds displayed the highest, and the apical thirds showed the lowest values in all groups (P < 0.05), except the control-aged group (P = 0.554). The aged control groups' values were found to be significantly lower than the aged CHX and BAC groups (P < 0.001). Aging significantly reduced the bond strength values of specimens in control groups (P < 0.001). However, aging did not significantly affect the push-out bond strength values of CHX and BAC groups (P > 0.050). The failure types were adhesive between the post and cement (type 1) in all groups, except control-aged group (type 2). Conclusion: The application of 2% chlorhexidine or 1% BAC may be an essential step that can be taken to preserve the bond strength of fiber posts.