Amino-Functionalized Metal-Organic Frameworks Featuring Ultra-Strong Ethane Nano-Traps for Efficient C2H6/C2H4 Separation.

Developing high-performance porous materials to separate ethane from ethylene is an important but challenging task in the chemical industry, given their similar sizes and physicochemical properties. Herein, a new type of ultra-strong C2H6 nano-trap, CuIn(3-ain)4 is presented, which utilizes multiple guest-host interactions to efficiently capture C2H6 molecules and separate mixtures of C2H6 and C2H4. The ultra-strong C2H6 nano-trap exhibits the high C2H6 (2.38 mmol g-1) uptake at 6.25 kPa and 298 K and demonstrates a remarkable selectivity of 3.42 for C2H6/C2H4 (10:90). Additionally, equimolar C2H6/C2H4 exhibited a superior high separation potential ∆Q (2286 mmol L-1) at 298 K. Kinetic adsorption tests demonstrated that CuIn(3-ain)4 has a high adsorption rate for C2H6, establishing it as a new benchmark material for the capture of C2H6 and the separation of C2H6/C2H4. Notably, this exceptional performance is maintained even at a higher temperature of 333 K, a phenomenon not observed before. Theoretical simulations and single-crystal X-ray diffraction provide critical insights into how selective adsorption properties can be tuned by manipulating pore dimensions and geometry. The excellent separation performance of CuIn(3-ain)4 has been confirmed through breakthrough experiments for C2H6/C2H4 gas mixtures.

Synthesis of Calix[4]arene-Based Porous Organic Cages and Their Gas Adsorption.

Two crystalline large-sized porous organic cages (POCs) based on conical calix[4]arene (C4A) were designed and synthesized. The four-jaw C4A unit tends to follow the face-directed self-assembly law with the planar triangular building blocks such as tris(4-aminophenyl)amine (TAPA) or 1,3,5-tris(4-aminophenyl)benzene (TAPB) to generate a predictable cage with a stoichiometry of [6+8]. The formation of the large cages is confirmed through their relative molecular mass measured using MALDI-TOF/TOF spectra. The protonated molecular ion peaks of C4A-TAPA and C4A-TAPB were observed at m/z 5109.0 (calculated for C336H240O24N32: m/z 5109.7) and m/z 5594.2 (calculated for C384H264O24N24: m/z 5598.4). C4A-POCs exhibit I-type N2 adsorption-desorption isotherms with the BET surface areas of 1444.9 m2 ⋅ g-1 and 1014.6 m2 ⋅ g-1. The CO2 uptakes at 273 K are 62.1 cm3 ⋅ g-1 and 52.4 cm3 ⋅ g-1 at a pressure of 100 KPa. The saturated iodine vapor static uptakes at 348 K are 3.9 g ⋅ g-1 and 3.5 g ⋅ g-1. The adsorption capacity of C4A-TAPA for SO2 reaches to 124.4 cm3 ⋅ g-1 at 298 K and 1.3 bar. Additionally, the adsorption capacities of C4A-TAPA for C2H2, C2H4, and C2H6 were evaluated.

Sorption of Soil Carbon Dioxide by Biochar and Engineered Porous Carbons.

CO2 is 45 to 50 times more concentrated in soil than in air, resulting in global diffusive fluxes that outpace fossil fuel combustion by an order of magnitude. Despite the scale of soil CO2 emissions, soil-based climate change mitigation strategies are underdeveloped. Existing approaches, such as enhanced weathering and sustainable land management, show promise but continue to face deployment barriers. We introduce an alternative approach: the use of solid adsorbents to directly capture CO2 in soils. Biomass-derived adsorbents could exploit favorable soil CO2 adsorption thermodynamics while also sequestering solid carbon. Despite this potential, previous study of porous carbon CO2 adsorption is mostly limited to single-component measurements and conditions irrelevant to soil. Here, we probe sorption under simplified soil conditions (0.2 to 3% CO2 in balance air at ambient temperature and pressure) and provide physical and chemical characterization data to correlate material properties to sorption performance. We show that minimally engineered pyrogenic carbons exhibit CO2 sorption capacities comparable to or greater than those of advanced sorbent materials. Compared to textural features, sorbent carbon bond morphology substantially influences low-pressure CO2 adsorption. Our findings enhance understanding of gas adsorption on porous carbons and inform the development of effective soil-based climate change mitigation approaches.

Scalable Synthesis of Robust MOF for Challenging Ethylene Purification and Propylene Recovery with Record Productivity.

Ethylene (C2H4) purification and propylene (C3H6) recovery are highly relevant in polymer synthesis, yet developing physisorbents for these industrial separation faces the challenges of merging easy scalability, economic feasibility, high moisture stability with great separation efficiency. Herein, we reported a robust and scalable MOF (MAC-4) for simultaneous recovery of C3H6 and C2H4. Through creating nonpolar pores decorated by accessible N/O sites, MAC-4 displays top-tier uptakes and selectivities for C2H6 and C3H6 over C2H4 at ambient conditions. Molecular modelling combined with infrared spectroscopy revealed that C2H6 and C3H6 molecules were trapped in the framework with stronger contacts relative to C2H4. Breakthrough experiments demonstrated exceptional separation performance for binary C2H6/C2H4 and C3H6/C2H4 as well as ternary C3H6/C2H6/C2H4 mixtures, simultaneously affording record productivities of 27.4 and 36.2 L kg-1 for high-purity C2H4 (≥99.9 %) and C3H6 (≥99.5 %). MAC-4 was facilely prepared at deckgram-scale under reflux condition within 3 hours, making it as a smart MOF to address challenging gas separations.

Mechanochemical "Cage-on-MOF" Strategy for Enhancing Gas Adsorption and Separation through Aperture Matching.

Post-modification of porous materials with molecular modulators has emerged as a well-established strategy for improving gas adsorption and separation. However, a notable challenge lies in maintaining porosity and the limited applicability of the current method. In this study, we employed the mechanochemical "Cage-on-MOF" strategy, utilizing porous coordination cages (PCCs) with intrinsic pores and apertures as surface modulators to improve the gas adsorption and separation properties of the parent MOFs. We demonstrated the fast and facile preparation of 28 distinct MOF@PCC composites by combining 7 MOFs with 4 PCCs with varying aperture sizes and exposed functional groups through a mechanochemical reaction in 5 mins. Only the combinations of PCCs and MOFs with closely matched aperture sizes exhibited enhanced gas adsorption and separation performance. Specifically, MOF-808@PCC-4 exhibited a significantly increased C2H2 uptake (+64 %) and a longer CO2/C2H2 separation retention time (+40 %). MIL-101@PCC-4 achieved a substantial C2H2 adsorption capacity of 6.11 mmol/g. This work not only highlights the broad applicability of the mechanochemical "Cage-on-MOF" strategy for the functionalization of a wide range of MOFs but also establishes potential design principles for the development of hybrid porous materials with enhanced gas adsorption and separation capabilities, along with promising applications in catalysis and intracellular delivery.

Crystalline Porous Organic Frameworks Based on Multiple Dynamic Linkages.

A novel class of crystalline porous materials has been developed utilizing multilevel dynamic linkages, including covalent B-O, dative B←N and hydrogen bonds. Typically, boronic acids undergo in situ condensation to afford B3O3-based units, which further extend to molecular complexes or chains via B←N bonds. The obtained superstructures are subsequently interconnected via hydrogen bonds and π-π interactions, producing crystalline porous organic frameworks (CPOFs). The CPOFs display excellent solution processability, allowing dissolution and subsequent crystallization to their original structures, independent of recrystallization conditions, possibly due to the diverse bond energies of the involved interactions. Significantly, the CPOFs can be synthesized on a gram-scale using cost-effective monomers. In addition, the numerous acidic sites endow the CPOFs with high NH3 capacity, surpassing most porous organic materials and commercial materials.

Zn-Based Metal-Organic Frameworks Using Triptycene Hexacarboxylate Ligands: Synthesis, Structure, and Gas-Sorption Properties.

A series of metal-organic frameworks (MOFs) based on zinc ions and two triptycene ligands of different size have been synthesized under solvothermal conditions. Structural analyses revealed that they are isostructural 3D-network MOFs. The high porosity and thermal stability of these MOFs can be attributed to the highly rigid triptycene-based ligands. Their BET specific surface areas depend on the size of the triptycene ligands. In contrast to these surface-area data, the H2 and CO2 adsorption of these MOFs is larger for MOFs with small pores. Consequently, we introduced functional groups to the bridge-head position of the triptycene ligands and investigated their effect on the gas-sorption properties. The results unveiled the role of the functional groups in the specific CO2 binding via an induced interaction between adsorbates and the functional groups. Excellent H2 and CO2 properties in these MOFs were achieved in the absence of open metal sites.

A Theoretical Perspective to Decipher the Origin of High Hydrogen Storage Capacity in Mn(II) Metal-Organic Framework.

Herein, we report a detailed periodic DFT investigation of Mn(II)-based [(Mn4 Cl)3 (BTT)8 ]3- (BTT3- =1,3,5-benzenetristetrazolate) metal-organic framework (MOF) to explore various hydrogen binding pockets, nature of MOF…H2 interactions, magnetic coupling and, H2 uptake capacity. Earlier experiments found an uptake capacity of 6.9 wt % of H2, with the heat of adsorption estimated to be ∼10 kJ/mol, which is one among the highest for any MOFs reported. Our calculations unveil different binding sites with computed binding energy varying from -6 to -15 kJ/mol. The binding of H2 at the Mn2+ site is found to be the strongest (site I), with H2 found to bind Mn2+ ion in a η2 fashion with a distance of 2.27 Šand binding energy of -15.4 kJ/mol. The bonding analysis performed using NBO and AIM reveal a strong donation of σ (H2 ) to the dz 2 orbital of the Mn2+ ion responsible for such large binding energy. The other binding pockets, such as -Cl (site II) and BTT ligands (site III and IV) were found to be weaker, with the binding energy decreasing in the order I>II>III>IV. The average binding energy computed for these four sites put together is 9.6 kJ/mol, which is in excellent agreement with the experimental value of ∼10 kJ/mol. We have expanded our calculations to compute binding energy for multiple sites simultaneously, and in this model, the binding energy per site was found to decrease as we increased the number of H2 molecules suggesting electronic and steric factors controlling the overall uptake capacity. The calculated adsorption isotherm using the GCMC method reproduces the experimental observations. Further, the magnetic coupling computed for the unbound MOF reveals moderate ferromagnetic and strong antiferromagnetic coupling within the tetrameric {Mn4 } unit leading to a three-up-one-down spin configuration as the ground state. These were then coupled ferromagnetically to other tetrameric units in the MOF network. The magnetic coupling was found to alter only marginally upon gas binding, suggesting that both exchange interaction and the spin-states are unlikely to play a role in the H2 uptake. This is contrary to the O2 uptake studied lately, where strong dependence on exchange-coupling/spin state was witnessed, suggesting exchange-coupling/magnetic field dependent binding as a viable route for gas separation.

A Series of Metal-Organic Frameworks with 2,2'-Bipyridyl Derivatives: Synthesis vs. Structure Relationships, Adsorption, and Magnetic Studies.

Five new metal-organic frameworks based on Mn(II) and 2,2'-bithiophen-5,5'-dicarboxylate (btdc2-) with various chelating N-donor ligands (2,2'-bipyridyl = bpy; 5,5'-dimethyl-2,2'-bipyridyl = 5,5'-dmbpy; 4,4'-dimethyl-2,2'-bipyridyl = 4,4'-dmbpy) [Mn3(btdc)3(bpy)2]·4DMF, 1; [Mn3(btdc)3(5,5'-dmbpy)2]·5DMF, 2; [Mn(btdc)(4,4;-dmbpy)], 3; [Mn2(btdc)2(bpy)(dmf)]·0.5DMF, 4; [Mn2(btdc)2(5,5'-dmbpy)(dmf)]·DMF, 5 (dmf, DMF = N,N-dimethylformamide) have been synthesized, and their crystal structure has been established using single-crystal X-ray diffraction analysis (XRD). The chemical and phase purities of Compounds 1-3 have been confirmed via powder X-ray diffraction, thermogravimetric, and chemical analyses as well as IR spectroscopy. The influence of the bulkiness of the chelating N-donor ligand on the dimensionality and structure of the coordination polymer has been analyzed, and the decrease in the framework dimensionality, as well as the secondary building unit's nuclearity and connectivity, has been observed for bulkier ligands. For three-dimensional (3D) coordination polymer 1, the textural and gas adsorption properties have been studied, revealing noticeable ideal adsorbed solution theory (IAST) CO2/N2 and CO2/CO selectivity factors (31.0 at 273 K and 19.1 at 298 K and 25.7 at 273 K and 17.0 at 298 K, respectively, for the equimolar composition and the total pressure of 1 bar). Moreover, significant adsorption selectivity for binary C2-C1 hydrocarbons mixtures (33.4 and 24.9 for C2H6/CH4, 24.8 and 17.7 for C2H4/CH4, 29.3 and 19.1 for C2H2/CH4 at 273 K and 298 K, respectively, for the equimolar composition and the total pressure of 1 bar) has been observed, making it possible to separate on 1 natural, shale, and associated petroleum gas into valuable individual components. The ability of Compound 1 to separate benzene and cyclohexane in a vapor phase has also been analyzed based on the adsorption isotherms of individual components measured at 298 K. The preferable adsorption of C6H6 over C6H12 by 1 at high vapor pressures (VB/VCH = 1.36) can be explained by the existence of multiple van der Waals interactions between guest benzene molecules and the metal-organic host revealed by the XRD analysis of 1 immersed in pure benzene for several days (1≅2C6H6). Interestingly, at low vapor pressures, an inversed behavior of 1 with preferable adsorption of C6H12 over C6H6 (KCH/KB = 6.33) was observed; this is a very rare phenomenon. Moreover, magnetic properties (the temperature-dependent molar magnetic susceptibility, χp(T) and effective magnetic moments, µeff(T), as well as the field-dependent magnetization, M(H)) have been studied for Compounds 1-3, revealing paramagnetic behavior consistent with their crystal structure.

Active Sites Decorated Nonpolar Pore-Based MOF for One-step Acquisition of C2 H4 and Recovery of C3 H6.

Herein, a 2-fold interpenetrated metal-organic framework (MOF) Zn-BPZ-TATB with accessible N/O active sites in nonpolar pore surfaces was reported for one-step C2 H4 purification from C2 H6 or C3 H6 mixtures as well as recovery of C3 H6 from C2 H6 /C3 H6 /C2 H4 mixtures. The MOF exhibits the favorable C2 H6 and C3 H6 uptakes (>100 cm3 g-1 at 298 K under 100 kPa) as well as selective adsorption of C2 H6 and C3 H6 over C2 H4 . The C3 H6 - and C2 H6 -selective feature were investigated detailedly by experimental tests as well as sorption kinetic studyies. Molecular modelling revealed the multiple interactions between C3 H6 or C2 H6 molecules and methyl groups as well as triazine rings in pores. Zn-BPZ-TATB not only can directly generate 323.4 L kg-1 and 15.4 L kg-1 of high-purity (≥99.9 %) C2 H4 from C3 H6 /C2 H4 and C2 H6 /C2 H4 mixtures, but also provide a large high-purity (≥99.5 %) C3 H6 recovery capacity of 60.1 L kg-1 from C3 H6 /C2 H4 mixtures. More importantly, the high-purity C3 H6 (≥99.5 %) and C2 H4 (≥99.9 %) with the productivities of 38.2 and 12.7 L kg-1 can be simultaneously obtained from C2 H6 /C3 H6 /C2 H4 mixtures through a single adsorption/desorption cycle.

Preserving Macroporosity in Type III Porous Liquids.

Preserving large permanent pore structures in a fluid may endow conventional liquids with emergent physical properties. However, such materials are challenging to make because of the tendency of the pores to be filled and occupied by the solvent molecules. Here, we report the design and synthesis of the first Type III porous liquid (PL) containing uniform yet stable 480 nm cavities. This was achieved by first constructing a single crystalline hollow metal-organic framework (MOF), UiO-66-NH2 , through chemical etching. The thin yet defect-free MOF shell effectively excludes the bulky poly(dimethylsiloxane) solvent molecules from entering the cavity through its 4 Šaperture, resulting in the preservation of both micro- and macroporosity in the PL. These enormous void spaces allow the PL to reversibly host and release up to 27 wt % water for up to 10 cycles. The switching between the "dry" state and the "wet" state led to a large changes of the thermal conductivity of the PL from 0.140 to 0.256 W m-1 K-1 , affording a guest-responsive liquid thermal switch with a switching ratio of 1.8.

Liquids with Permanent Macroporosity.

Permanent macropores (>50 nm) had not been reported in the liquid state until a recent report by Tao Li and co-workers describing a synthetic strategy to form a porous liquid with dual micro-macroporosity. This is prepared by producing hierarchically porous particles that are surface coated and fluidised by dispersion. Surface micropores enable permanent porosity by steric exclusion of the fluid phase. The material has a considerable water uptake capacity (27 % w/w) due to large (480 nm) unoccupied macropores. This also enables switching of thermal conductivity on uptake of water. These are new properties translated from porous solids to the liquid state.

A Microporous Metal-Organic Framework with Unique Aromatic Pore Surfaces for High Performance C2 H6 /C2 H4 Separation.

Developing adsorptive separation processes based on C2 H6 -selective sorbents to replace energy-intensive cryogenic distillation is a promising alternative for C2 H4 purification from C2 H4 /C2 H6 mixtures, which however remains challenging. During our studies on two isostructural metal-organic frameworks (Ni-MOF 1 and Ni-MOF 2), we found that Ni-MOF 2 exhibited significantly higher performance for C2 H6 /C2 H4 separation than Ni-MOF-1, as clearly established by gas sorption isotherms and breakthrough experiments. Density-Functional Theory (DFT) studies showed that the unblocked unique aromatic pore surfaces within Ni-MOF 2 induce more and stronger C-H⋅⋅⋅π with C2 H6 over C2 H4 while the suitable pore spaces enforce its high C2 H6 uptake capacity, featuring Ni-MOF 2 as one of the best porous materials for this very important gas separation. It generates 12 L kg-1 of polymer-grade C2 H4 product from equimolar C2 H6 /C2 H4 mixtures at ambient conditions.

Genuine Pores in a Stable Zinc Phosphite for High H2 Adsorption and CO2 Capture.

An uncommon example of stable mixed-ligand zinc phosphite with genuine pores has been synthesized by using zinc metal, inorganic phosphite acid, thio-functionalized O-donor (2,5-thiophenedicarboxylate, TPDC), and tetradentate N-donor [1,2,4,5-tetrakis(imidazol-1-ylmethyl)benzene, TIMB] units assembled into one crystalline structure according to a hydro(solvo)thermal method. This is a very rare case of a metal phosphite incorporating both N- and O-donor ligands. The tetradentate TIMB linker bound to zinc atoms of the isolated zincophosphite hexamers to form a 3D open-framework structure by crosslinking structural components of 1D chains and 2D layers. Here, the TPDC ligand acts as a monodentate binding model to functionalize its porous structure with the uncoordinated S atom and COO- group. Interestingly, this compound demonstrates the highest H2 storage capacity among organic-inorganic hybrid metal phosphates (and phosphites), and a good CO2 capture at 298 K compared with the majority of crystalline materials. The possible adsorption sites and selectivity for CO2 over H2 , N2 , and CO at 298 K were calculated by using density functional theory (DFT), the ideal adsorption solution theory (IAST), and fitting experimental pure-component adsorption data.

The Decisive Role of Spin States and Spin Coupling in Dictating Selective O2 Adsorption in Chromium(II) Metal-Organic Frameworks.

The coordinatively unsaturated chromium(II)-based Cr3 [(Cr4 Cl)3 (BTT)8 ]2 (Cr-BTT; BTT3- =1,3,5-benzenetristetrazolate) metal-organic framework (MOF) has been shown to exhibit exceptional selectivity towards adsorption of O2 over N2 /H2 . Using periodic density functional theory (DFT) calculations, we attempted to decipher the origin of this puzzling selectivity. By computing and analyzing the magnetic exchange coupling, binding energies, the partial density of states (pDOS), and adsorption isotherms for the pristine and gas-bound MOFs [(Cr4 (X)4 Cl)3 (BTT)8 ]3- (X=O2 , N2 , and H2 ), we unequivocally established the role of spin states and spin coupling in controlling the gas selectivity. The computed geometries and gas adsorption isotherms are consistent with the earlier experiments. The binding of O2 to the MOF follows an electron-transfer mechanism resulting in a CrIII superoxo species (O2 .- ) with a very strong antiferromagnetic coupling between the two centers, whereas N2 /H2 are found to weakly interact with the metal center and hence only slightly perturb the associated coupling constants. Although the gas-bound and unbound MOFs have an S=0 ground state (GS), the nature of spin the configurations and the associated magnetic exchanges are dramatically different. The binding energy and the number of oxygen molecules that can favorably bind to the Cr center were found to vary with respect to the spin state, with a significant energy margin (47.6 kJ mol-1 ). This study offers a hitherto unknown strategy of using spin state/spin couplings to control gas adsorption selectivity in MOFs.

Properties of Single-Component Metal-Organic Framework Crystal-Glass Composites.

The formation, and subsequent structural, thermal and adsorptive properties of single-component metal-organic framework crystal-glass composites (MOF-CGCs) are investigated. A series of novel materials exhibiting chemically identical glassy and crystalline phases within the same material were produced, where crystalline ZIF-62(Zn) was incorporated within an ag ZIF-62(Zn) matrix. X-ray diffraction showed that the crystalline phase was still present after heating to above the glass transition temperature of ag ZIF-62(Zn), and interfacial compatibility between the crystalline and glassy phases was investigated using a mixed-metal (ZIF-62(Co))0.5 (ag ZIF-62(Zn))0.5 analogue. CO2 gas adsorption measurements showed that the CO2 uptakes of the MOF-CGCs were between those of the crystalline and glassy phases.

"Activated Borane" - A Porous Borane Cluster Network as an Effective Adsorbent for Removing Organic Pollutants.

The unprecedented co-thermolysis of decaborane(14) (nido-B10 H14 ) and toluene results in a novel porous material (that we have named "activated borane") containing micropores between 1.0 and 1.5 nm in diameter and a specific surface area of 774 m2 g-1 (Ar, 87 K) that is thermally stable up to 1000 °C. Solid state 1 H, 11 B and 13 C MAS NMR, UV-vis and IR spectroscopies suggest an amorphous structure of borane clusters interconnected by toluene moieties in a ratio of about three toluene molecules for every borane cluster. In addition, the structure contains Lewis-acidic tri-coordinated boron sites giving it some unique properties. Activated borane displays high sorption capacity for pollutants such as sulfamethoxazole, tramadol, diclofenac and bisphenol A that exceed the capacity of commercially-available activated carbon. The consistency in properties for each batch made, and the ease of its synthesis, make activated borane a promising porous material worthy of broad attention.

A simple and fast method for the fabrication of p-typeß-Ga2O3by electrochemical oxidation method with DFT interpretation.

In this work, a simple electrochemical oxidation method has been used to prepare p-typeß-Ga2O3nanoparticles. This method overcomes the problem of doping high energy gap semiconductors to form p-type. The electron holes ofß-Ga2O3were caused by oxygen vacancy (Vo) and showed the shorter lattice constant and preferred orientation in XRD analysis. The peak area of oxygen vacancy also reflects a higher ratio than n-type Ga2O3in x-ray photoelectron spectroscopy (XPS). The adsorption of reducing gas (CO, CH4, and H2) enhanced the resistance of theß-Ga2O3confirming the p-type character of NPs. The DFT calculations showed that oxygen vacancy leads to higher energy of the Fermi level and is near the valence band. The binding energy of Ga2O3and after interaction with gas molecular was also calculated which is analogous to our experimental data.

Rational Process Design for Facile Fabrication of Dual Functional Hybrid Membrane of MOF and Electrospun Nanofiber towards High Removal Efficiency of PM2.5 and Toxic Gases.

The application of nanofiber (NF) and porous metal-organic framework (MOF) has increasingly attracted attention for the protection of public health. This composite platform provides the physical sieving of particulate matters (PMs) and capturing gases, serving as an outstanding filtering medium with lightweight and multifunctionality. Herein, process design and optimization are performed to produce a multifunctional membrane comprised NFs and MOF particles. Electrospinning/electrospray techniques are used to fabricate a hybrid membrane of poly(vinyl alcohol) NF and Fe-BTC as an adsorptive MOF on a macroporous nonwoven (NW). Three types of filters are prepared by varying the order of processing steps, that is, MOF/NF/NW, MOF+NF/NW, and NF/MOF/NW, to elucidate the effect of the fabrication process in the filtration of air pollutant. The optimal filtration performance is achieved in MOF+NF/NW system: the highest filtration efficiency (97%) and outstanding gas capturing efficiencies (≈60% and ≈35% decreases from initial NH3 and H2 S concentrations, respectively). However, when air permeability and filtration efficiency are considered, the most desirable configuration for personal protection equipment (PPE) is NF/MOF/NW system, which effectively enabled comfortable breathing without compromising the lightweight and multifunctional performance.

Survey on Adsorption of Low Molecular Weight Compounds in Cu-BTC Metal-Organic Framework: Experimental Results and Thermodynamic Modeling.

This contribution aims at providing a critical overview of experimental results for the sorption of low molecular weight compounds in the Cu-BTC Metal-Organic Framework (MOF) and of their interpretation using available and new, specifically developed, theoretical approaches. First, a literature review of experimental results for the sorption of gases and vapors is presented, with particular focus on the results obtained from vibrational spectroscopy techniques. Then, an overview of theoretical models available in the literature is presented starting from semiempirical theoretical approaches suitable to interpret the adsorption thermodynamics of gases and vapors in Cu-BTC. A more detailed description is provided of a recently proposed Lattice Fluid approach, the Rigid Adsorbent Lattice Fluid (RALF) model. In addition, to deal with the cases where specific self- and cross-interactions (e.g., H-bonding, Lewis acid/Lewis base interactions) play a role, a modification of the RALF model, i.e., the RALFHB model, is introduced here for the first time. An extension of both RALF and RALFHB is also presented to cope with the cases in which the heterogeneity of the rigid adsorbent displaying a different kind of adsorbent cages is of relevance, as it occurs for the adsorption of some low molecular weight substances in Cu-BTC MOF.