High-yield hybrid breeding of Camellia oleifolia based on ISSR molecular markers.

BACKGROUND: C. Oleifera is among the world's largest four woody plants known for their edible oil production, yet the contribution rate of improved varieties is less than 20%. The species traditional breeding is lengthy cycle (20-30 years), occupation of land resources, high labor cost, and low accuracy and efficiency, which can be enhanced by molecular marker-assisted selection. However, the lack of high-quality molecular markers hinders the species genetic analysis and molecular breeding. RESULTS: Through quantitative traits characterization, genetic diversity assessment, and association studies, we generated a selection population with wide genetic diversity, and identified five excellent high-yield parental combinations associated with four reliable high-yield ISSR markers. Early selection criteria were determined based on kernel fresh weight and cultivated 1-year seedling height, aided by the identification of these 4 ISSR markers. Specific assignment of selected individuals as paternal and maternal parents was made to capitalize on their unique attributes. CONCLUSIONS: Our results indicated that molecular markers-assisted breeding can effectively shorten, enhance selection accuracy and efficiency and facilitate the development of a new breeding system for C. oleifera.

Polyamines: pleiotropic molecules regulating plant development and enhancing crop yield and quality.

Polyamines (PAs) are pleiotropic bioorganic molecules. Cellular PA contents are determined by a balance between PA synthesis and degradation. PAs have been extensively demonstrated to play vital roles in the modulation of plant developmental processes and adaptation to various environmental stresses. In this review, the latest advances on the diverse roles of PAs in a range of developmental processes, such as morphogenesis, organogenesis, growth and development, and fruit ripening, are summarized and discussed. Besides, the crosstalk between PAs and phytohormones or other signalling molecules, including H2O2 and NO, involved in these processes is dwelled on. In addition, the attempts made to improve the yield and quality of grain and vegetable crops through altering the PA catabolism are enumerated. Finally, several other vital questions that remain unanswered are proposed and discussed. These include the mechanisms underlying the cooperative regulation of developmental processes by PAs and their interplaying partners like phytohormones, H2O2 and NO; PA transport for maintaining homeostasis; and utilization of PA anabolism/catabolism for generating high-yield and good-quality crops. This review aims to gain new insights into the pleiotropic role of PAs in the modulation of plant growth and development, which provides an alternative approach for manipulating and engineering valuable crop varieties that can be used in the future.

Engineering Streptomyces sp. CPCC 204095 for the targeted high-level production of isatropolone A by elucidating its pathway-specific regulatory mechanism.

BACKGROUND: Isatropolone A and C, produced by Streptomyces sp. CPCC 204095, belong to an unusual class of non-benzenoid aromatic compounds and contain a rare seven-membered ring structure. Isatropolone A exhibits potent activity against Leishmania donovani, comparable to the only oral drug miltefosine. However, its variably low productivity represents a limitation for this lead compound in the future development of new anti-leishmaniasis drugs to meet unmet clinical needs. RESULTS: Here we first elucidated the regulatory cascade of biosynthesis of isatropolones, which consists of two SARP family regulators, IsaF and IsaJ. Through a series of in vivo and in vitro experiments, IsaF was identified as a pathway-specific activator that orchestrates the transcription of the gene cluster essential for isatropolone biosynthesis. Interestingly, IsaJ was found to only upregulate the expression of the cytochrome P450 monooxygenase IsaS, which is crucial for the yield and proportion of isatropolone A and C. Through targeted gene deletions of isaJ or isaS, we effectively impeded the conversion of isatropolone A to C. Concurrently, the facilitation of isaF overexpression governed by selected promoters, prompted the comprehensive activation of the production of isatropolone A. Furthermore, meticulous optimization of the fermentation parameters was conducted. These strategies culminated in the attainment of an unprecedented maximum yield-980.8 mg/L of isatropolone A-achieved in small-scale solid-state fermentation utilizing the genetically modified strains, thereby establishing the highest reported titer to date. CONCLUSION: In Streptomyces sp. CPCC 204095, the production of isatropolone A and C is modulated by the SARP regulators IsaF and IsaJ. IsaF serves as a master pathway-specific regulator for the production of isatropolones. IsaJ, on the other hand, only dictates the transcription of IsaS, the enzyme responsible for the conversion of isatropolone A and C. By engineering the expression of these pivotal genes, we have devised a strategy for genetic modification aimed at the selective and high-yield biosynthesis of isatropolone A. This study not only unveils the unique regulatory mechanisms governing isatropolone biosynthesis for the first time, but also establishes an essential engineering framework for the targeted high-level production of isatropolone A.

High-yield magnetosome production of Magnetospirillum magneticum strain AMB-1 in flask fermentation through simplified processing and optimized iron supplementation.

OBJECTIVES: Developing a simplified flask fermentation strategy utilizing magnetotactic bacterium AMB-1 and optimized iron supplementation for high-yield magnetosome production to address the challenges associated with magnetosome acquisition. RESULTS: A reliable processing for the pure culture of AMB-1 was established using standard laboratory consumables and equipment. Subsequently, the medium and iron supplementation were optimized to enhance the yield of AMB-1 magnetosomes. The mSLM supported higher biomass accumulation in flask fermentation, reaching an OD565 of ~ 0.7. The premixed solution of ferric quinate and EDTA-Fe (at a ratio of 0.5:0.5 and a concentration of 0.4 mmol/L) stabilized Fe3+ and significantly increased the reductase activity of AMB-1. Flask fermentations with an initial volume of 15 L were then conducted employing the optimized fermentation strategy. After two rounds of iron and nutrient supplementation, the magnetosome yield reached 185.7 ± 9.5 mg/batch (approximately 12 mg/L), representing the highest AMB-1 flask fermentation yield to our knowledge. CONCLUSION: A flask fermentation strategy for high-yield magnetsome production was developed, eliminating the need for bioreactors and greatly simplifying the process of magnetosome acquisition.

Unveiling the Regulatory Role of SIRT1 in Oxidative Stress Response of bovine mammary cells.

High-yield dairy cows typically undergo intense cellular metabolism, leading to oxidative stress in their mammary tissues. Our study found that these high-yield cows had significantly elevated levels of hydrogen peroxide (H2O2), lipoperoxidase, and total antioxidant capacity in their blood, compared with ordinary cows. This increased oxidative stress is associated with heightened expression of genes such as GCLC, GCLM and SIRT1 and proteins such as SIRT1 in the mammary tissue of high-yield cows. MAC-T cells were stimulated with H2O2 at a concentration equal to the average H2O2 level in the serum of ethically high-yielding cows, as detected by an assay kit. Our observations revealed that short-term exposure (12 h) to H2O2 upregulated the expression of SIRT1 gene and protein. It also increased gene expression for SOD2, CAT, GCLC, GCLM, PGC-1α, and NQO1, elevated the phosphorylation of AMPK, and enhanced protein expression of PGC-1α, NQO1, Nrf2, and HO-1, while reducing the phosphorylation of NF-κB. Additionally, short-term H2O2 stimulation resulted in increased total antioxidant capacity, SOD, GSH, and CAT levels in the mammary epithelial cells of dairy cows. In contrast, prolonged exposure to H2O2 (24 h) yielded opposite results, indicating reduced antioxidant capacity. Further investigation showed that SIRT1 inhibitor (EX 527) could reverse the enhanced cellular antioxidant capacity triggered by short-term oxidative stress. However, it is crucial to note that while 12 h H2O2 stimulation improved antioxidant capacity, reactive oxygen species (ROS) and malondialdehyde (MDA) levels inside the cell gradually increased over time, suggesting greater damage under long-term stimulation. Conversely, the SIRT1 activator (SRT 2104) could reverse the reduced cellular antioxidant capacity caused by long-term oxidative stress and significantly inhibit the accumulation of ROS and MDA. Notably, SRT 2104 demonstrated similar effects in MAC-T cells during lactation. In summary, SIRT1 plays a crucial role in regulating the antioxidant capacity of mammary epithelial cells in dairy cows. This discovery provides valuable insights into the antioxidant mechanisms of mammary cells, which can serve as a theoretical foundation for future mammary health strategies.

Improving the productivity of Xinjiang cotton in heat-limited regions under two life history strategies.

Cotton is a major cash crop globally, playing a pivotal role in the textile sector. However, cotton growers in Xinjiang region are experiencing cotton yield penalty caused by limited heat environment. In this region, limited heat conditions strongly arrest cotton plant growth and development resulting in recued productivity. To counteract this problem, there is an urgent need to robustly identify efficient management strategies to improve plant performance and increase cotton yield under heat-limited situations. This will hold crucial implications for agricultural sustainability and global cotton supply. This review article identified challenges faced by cotton producers under heat limited environments with potential solutions to enhance cotton productivity. Specifically, we focused on the implementation of two life history strategies including planting early maturing and cold tolerant cultivars, and adjusting sowing date that can promote early maturity and increase cold stress tolerance. These strategies have shown promising results in protecting cotton plants from limited heat injury and consequently improved cotton productivity. By focusing on Xinjiang province unique climate and associated agronomic practices, valuable insights can be gained, which may have broader applications in other heat-limited cotton-growing regions globally. This comprehensive review endeavors to provide a foundation for future research and practical interventions aimed at boosting cotton yields under limited heat areas.

Functional genomics of Brassica napus: Progresses, challenges, and perspectives.

Brassica napus, commonly known as rapeseed or canola, is a major oil crop contributing over 13% to the stable supply of edible vegetable oil worldwide. Identification and understanding the gene functions in the B. napus genome is crucial for genomic breeding. A group of genes controlling agronomic traits have been successfully cloned through functional genomics studies in B. napus. In this review, we present an overview of the progress made in the functional genomics of B. napus, including the availability of germplasm resources, omics databases and cloned functional genes. Based on the current progress, we also highlight the main challenges and perspectives in this field. The advances in the functional genomics of B. napus contribute to a better understanding of the genetic basis underlying the complex agronomic traits in B. napus and will expedite the breeding of high quality, high resistance and high yield in B. napus varieties.

Enhanced expression and solubility of main protease (Mpro) of SARS-CoV-2 from E. coli.

The main protease (Mpro) of SARS-CoV-2 is a essential enzyme that facilitates viral transcription and replication. Furthermore, the conservation of Mpro across different variants and its non-overlapping nature with human proteases make it an appealing target for therapeutic interventions against SARS-CoV-2. Multiple inhibitors specifically target Mpro to mitigate the infection caused by SARS-CoV-2. In the current study, successful cloning and expression of SARS-CoV-2 Mpro were achieved using two E. coli hosts, namely BL21-DE3 and BL21-DE3-RIL. By optimizing the conditions for induction, the expression of Mpro in the soluble fraction of E. coli was improved. Subsequently, Mpro was purified using affinity chromatography, yielding significantly higher quantities from the BL21-DE3-RIL strain compared to the BL21-DE3 strain, with the former producing nearly twice as much as the latter. The purified Mpro was further characterized by mass spectrometry, fluorescence spectroscopy and circular dichroism (CD). Through fluorescence quenching studies, it was discovered that both GC376 and chitosan, which are inhibitors of Mpro, induced structural changes in the purified Mpro protein. This indicates that the protein retained its functional activity even after being expressed in a bacterial host. Further, FRET-based assay highlighted that the enzymatic activity of Mpro was significantly reduced in presence of both GC376 and chitosan. Consequently, the utilization of optimal conditions and the BL21-DE3-RIL bacterial host facilitates the cost-effective production of Mpro on a large scale, enabling high yields. This production approach can be applied for the screening of potent therapeutic drugs, making it a valuable resource for drug development endeavors.

Agronomic and ionomics indicators of high-yield, mineral-dense, and low-Cd grains of wheat (Triticum aestivum L.) cultivars.

The accumulation of toxic and essential nutrient elements in wheat grain influences wheat yield, grain nutritional quality, and human health. Here, we assessed the potential for breeding wheat cultivars to combine high yield with low cadmium and high iron and/or zinc concentrations in grains, and we screened appropriate cultivars. A pot experiment was conducted to explore differences in grain cadmium, iron, and zinc concentrations among 68 wheat cultivars, as well as their relationships with other nutrient elements and agronomic characters. The results showed 2.04-, 1.71-, and 1.64-fold differences in grain cadmium, iron, and zinc concentrations, respectively, among the 68 cultivars. Grain cadmium concentration was positively correlated with grain zinc, iron, magnesium, phosphorus, and manganese concentrations. Grain copper concentration was positively correlated with grain zinc and iron concentrations, but not with grain cadmium concentration. Therefore, copper has a potential role in regulating grain iron and zinc accumulation without influencing cadmium concentration in wheat grain. There were no significant relationships between grain cadmium concentration and four important wheat agronomic characters (i.e., grain yield, straw yield, thousand kernel weight, and plant height), indicating that the breeding of low-cadmium-accumulating cultivars with dwarfism and high yield characteristics is possible. On cluster analysis, four cultivars (Ningmai11, Xumai35, Baomai6, and Aikang58) exhibited low-cadmium and high-yield characteristics. Among them, Aikang58 contained moderate iron and zinc concentrations, while Ningmai11 had relatively high iron but low zinc concentrations in the grain. These results imply that it is feasible to breed high-yield dwarf wheat with low cadmium and moderate iron and zinc concentrations in the grain.

Synthesis of Liquid Hydrocarbon via Direct Hydrogenation of CO2 over FeCu-Based Bifunctional Catalyst Derived from Layered Double Hydroxides.

Here, we report a Na-promoted FeCu-based catalyst with excellent liquid hydrocarbon selectivity and catalytic activity. The physiochemical properties of the catalysts were comprehensively characterized by various characterization techniques. The characterization results indicate that the catalytic performance of the catalysts was closely related to the nature of the metal promoters. The Na-AlFeCu possessed the highest CO2 conversion due to enhanced CO2 adsorption of the catalysts by the introduction of Al species. The introduction of excess Mg promoter led to a strong methanation activity of the catalyst. Mn and Ga promoters exhibited high selectivity for light hydrocarbons due to their inhibition of iron carbides generation, resulting in a lack of chain growth capacity. The Na-ZnFeCu catalyst exhibited the optimal C5+ yield, owing to the fact that the Zn promoter improved the catalytic activity and liquid hydrocarbon selectivity by modulating the surface CO2 adsorption and carbide content. Carbon dioxide (CO2) hydrogenation to liquid fuel is considered a method for the utilization and conversion of CO2, whereas satisfactory activity and selectivity remains a challenge. This method provides a new idea for the catalytic hydrogenation of CO2 and from there the preparation of high-value-added products.

Preparation of Cellulose-Based Activated Carbon Fibers with Improved Yield and Their Methylene Chloride Adsorption Evaluation.

The recent rapid growth of the battery industry has led to a rapid increase in methylene chloride emissions. Methylene chloride causes health and social problems in humans. In this study, cellulose-based activated carbon fibers (CACFs) with improved yield were prepared for the removal of methylene chloride. The concentration of ammonium phosphate in the pretreatment controlled the crosslink density of cellulose fibers and improved the yield. From the results, the specific surface area and total pore volume of cellulose-based activated carbon fibers pretreated with ammonium phosphate (AP-CACFs) were determined to be 1920-2060 m2/g and 0.83-1.02 cm3/g, respectively, and the total yield improved by 6.78-11.59% compared to that of CACFs (4.97%). In particular, a correlation between the textural properties of CACFs and methylene chloride adsorption/desorption behavior was obtained. This correlation can be used to develop efficient adsorbents for methylene chloride removal.

Efficient Preparation of Small-Sized Transition Metal Dichalcogenide Nanosheets by Polymer-Assisted Ball Milling.

Two-dimensional (2D) transition metal dichalcogenide nanosheets (TMDC NSs) have attracted growing interest due to their unique structure and properties. Although various methods have been developed to prepare TMDC NSs, there is still a great need for a novel strategy combining simplicity, generality, and high efficiency. In this study, we developed a novel polymer-assisted ball milling method for the efficient preparation of TMDC NSs with small sizes. The use of polymers can enhance the interaction of milling balls and TMDC materials, facilitate the exfoliation process, and prevent the exfoliated nanosheets from aggregating. The WSe2 NSs prepared by carboxymethyl cellulose sodium (CMC)-assisted ball milling have small lateral sizes (8~40 nm) with a high yield (~60%). The influence of the experimental conditions (polymer, milling time, and rotation speed) on the size and yield of the nanosheets was studied. Moreover, the present approach is also effective in producing other TMDC NSs, such as MoS2, WS2, and MoSe2. This study demonstrates that polymer-assisted ball milling is a simple, general, and effective method for the preparation of small-sized TMDC NSs.

Improving the production of NAD+ via multi-strategy metabolic engineering in Escherichia coli.

Nicotinamide adenine dinucleotide (NAD+) is an essential coenzyme involved in numerous physiological processes. As an attractive product in the industrial field, NAD+ also plays an important role in oxidoreductase-catalyzed reactions, drug synthesis, and the treatment of diseases, such as dementia, diabetes, and vascular dysfunction. Currently, although the biotechnology to construct NAD+-overproducing strains has been developed, limited regulation and low productivity still hamper its use on large scales. Here, we describe multi-strategy metabolic engineering to address the NAD+-production bottleneck in E. coli. First, blocking the degradation pathway of NAD(H) increased the accumulation of NAD+ by 39%. Second, key enzymes involved in the Preiss-Handler pathway of NAD+ synthesis were overexpressed and led to a 221% increase in the NAD+ concentration. Third, the PRPP synthesis module and Preiss-Handler pathway were combined to strengthen the precursors supply, which resulted in enhancement of NAD+ content by 520%. Fourth, increasing the ATP content led to an increase in the concentration of NAD+ by 170%. Finally, with the combination of all above strategies, a strain with a high yield of NAD+ was constructed, with the intracellular NAD+ concentration reaching 26.9 µmol/g DCW, which was 834% that of the parent strain. This study presents an efficient design of an NAD+-producing strain through global regulation metabolic engineering.

Whole cell-based catalyst for enzymatic production of the osmolyte 2-O-α-glucosylglycerol.

BACKGROUND: Glucosylglycerol (2-O-α-D-glucosyl-sn-glycerol; GG) is a natural osmolyte from bacteria and plants. It has promising applications as cosmetic and food-and-feed ingredient. Due to its natural scarcity, GG must be prepared through dedicated synthesis, and an industrial bioprocess for GG production has been implemented. This process uses sucrose phosphorylase (SucP)-catalyzed glycosylation of glycerol from sucrose, applying the isolated enzyme in immobilized form. A whole cell-based enzyme formulation might constitute an advanced catalyst for GG production. Here, recombinant production in Escherichia coli BL21(DE3) was compared systematically for the SucPs from Leuconostoc mesenteroides (LmSucP) and Bifidobacterium adolescentis (BaSucP) with the purpose of whole cell catalyst development. RESULTS: Expression from pQE30 and pET21 plasmids in E. coli BL21(DE3) gave recombinant protein at 40-50% share of total intracellular protein, with the monomeric LmSucP mostly soluble (≥ 80%) and the homodimeric BaSucP more prominently insoluble (~ 40%). The cell lysate specific activity of LmSucP was 2.8-fold (pET21; 70 ± 24 U/mg; N = 5) and 1.4-fold (pQE30; 54 ± 9 U/mg, N = 5) higher than that of BaSucP. Synthesis reactions revealed LmSucP was more regio-selective for glycerol glycosylation (~ 88%; position O2 compared to O1) than BaSucP (~ 66%), thus identifying LmSucP as the enzyme of choice for GG production. Fed-batch bioreactor cultivations at controlled low specific growth rate (µ = 0.05 h-1; 28 °C) for LmSucP production (pET21) yielded ~ 40 g cell dry mass (CDM)/L with an activity of 2.0 × 104 U/g CDM, corresponding to 39 U/mg protein. The same production from the pQE30 plasmid gave a lower yield of 6.5 × 103 U/g CDM, equivalent to 13 U/mg. A single freeze-thaw cycle exposed ~ 70% of the intracellular enzyme activity for GG production (~ 65 g/L, ~ 90% yield from sucrose), without releasing it from the cells during the reaction. CONCLUSIONS: Compared to BaSucP, LmSucP is preferred for regio-selective GG production. Expression from pET21 and pQE30 plasmids enables high-yield bioreactor production of the enzyme as a whole cell catalyst. The freeze-thaw treated cells represent a highly active, solid formulation of the LmSucP for practical synthesis.

High-yield strain of fusidic acid obtained by atmospheric and room temperature plasma mutagenesis and the transcriptional changes involved in improving its production in fungus Fusidium coccineum.

AIMS: To obtain the high-yield strain of fusidic acid, which is produced from fungus Fusidium coccineum and is the only fusidane-type antibiotic that has been used clinically, and confirm the changes in the transcription levels involved in increasing its production. METHODS AND RESULTS: By using the atmospheric and room temperature plasma mutagenesis technology, a high-yield mutant strain of fusidic acid-producing fungus F. coccineum was obtained. Using the genomic analysis of the original strain based on biosynthetic pathways of ergosterol and helvolic acid, we demonstrate that the pathway involved in the biosynthesis of 2,3-oxidosqualene from acetyl coenzyme A was shared by fusidic acid and ergosterol, and fusidic acid was finally synthesized by the catalysis of multiple cytochrome P450s and short-chain dehydrogenase/reductase from 2,3-oxidosqualene. Then, through the transcriptomic analysis of the original and mutagenized strain, it revealed that the proposed pathway from sucrose to fusidic acid was the most significantly up-regulated in the transcription levels of the mutant strain. CONCLUSIONS: The changes in the transcription levels of fusidic acid during its biosynthesis might result in high-yield of fusidic acid in the mutant strain. This is the first report on the whole biosynthetic pathway of fusidic acid in F. coccineum. SIGNIFICANCE AND IMPACT OF THE STUDY: This study obtain the genetic basis for the biosynthesis of fusidic acid which could be beneficial for the molecular modifications of F. coccineum to further increase its yield by fermentation in future, and established the foundation to reveal the mechanism of the high-yield of the mutant strain.

Improving probiotic spore yield using rice straw hydrolysate.

Spore-forming Bacillus sp. has been extensively studied for their probiotic properties. In this study, an acid-treated rice straw hydrolysate was used as carbon source to produce the spores of Bacillus coagulans. The results showed that this hydrolysate significantly improved the spore yield compared with other carbon sources such as glucose. Three significant medium components including rice straw hydrolysate, MnSO4 and yeast extract were screened by Plackett-Burman design. These significant variables were further optimized by response surface methodology (RSM). The optimal values of the medium components were rice straw hydolysate of 27% (v/v), MnSO4 of 0·78 g l-1 and yeast extract of 1·2 g l-1 . The optimized medium and RSM model for spore production were validated in a 5 l bioreactor. Overall, this sporulation medium containing acid-treated rice straw hydrolysate has a potential to be used in the production of B. coagulans spores.

Cysteine [2,4] Disulfide Bond as a New Modifiable Site of α-Conotoxin TxIB.

α-Conotoxin TxIB, a selective antagonist of α6/α3ß2ß3 nicotinic acetylcholine receptor, could be a potential therapeutic agent for addiction and Parkinson's disease. As a peptide with a complex pharmacophoric conformation, it is important and difficult to find a modifiable site which can be modified effectively and efficiently without activity loss. In this study, three xylene scaffolds were individually reacted with one pair of the cysteine residues ([1,3] or [2,4]), and iodine oxidation was used to form a disulfide bond between the other pair. Overall, six analogs were synthesized with moderate isolated yields from 55% to 65%, which is four times higher than the traditional two-step oxidation with orthogonal protection on cysteines. The cysteine [2,4] modified analogs, with higher stability in human serum than native TxIB, showed obvious inhibitory effect and selectivity on α6/α3ß2ß3 nicotinic acetylcholine receptors (nAChRs), which was 100 times more than the cysteine [1,3] modified ones. This result demonstrated that the cysteine [2,4] disulfide bond is a new modifiable site of TxIB, and further modification can be a simple and feasible strategy for the exploitation and utilization of α-Conotoxin TxIB in drug discovery.

Identifying a large number of high-yield genes in rice by pedigree analysis, whole-genome sequencing, and CRISPR-Cas9 gene knockout.

Repeated artificial selection of a complex trait facilitates the identification of genes underlying the trait, especially if multiple selected descendant lines are available. Here we developed a pedigree-based approach to identify genes underlying the Green Revolution (GR) phenotype. From a pedigree analysis, we selected 30 cultivars including the "miracle rice" IR8, a GR landmark, its ancestors and descendants, and also other related cultivars for identifying high-yield genes. Through sequencing of these genomes, we identified 28 ancestral chromosomal blocks that were maintained in all the high-yield cultivars under study. In these blocks, we identified six genes of known function, including the GR gene sd1, and 123 loci with genes of unknown function. We randomly selected 57 genes from the 123 loci for knockout or knockdown studies and found that a high proportion of these genes are essential or have phenotypic effects related to rice production. Notably, knockout lines have significant changes in plant height (P < 0.003), a key GR trait, compared with wild-type lines. Some gene knockouts or knockdowns were especially interesting. For example, knockout of Os10g0555100, a putative glucosyltransferase gene, showed both reduced growth and altered panicle architecture. In addition, we found that in some retained chromosome blocks several GR-related genes were clustered, although they have unrelated sequences, suggesting clustering of genes with similar functions. In conclusion, we have identified many high-yield genes in rice. Our method provides a powerful means to identify genes associated with a specific trait.

Correlation analysis of candidate gene SNP for high-yield in Liaoning cashmere goats with litter size and cashmere performance.

This study was designed to identify the relationship of four genes (GDF9, BMPR-IB, FecB and ESR) polymorphisms in the 3'UTR region with litter size and cashmere performance of Liaoning cashmere goats (LCG, n = 1140). The ESR C463T and T575G loci of LCG were genotyped. The results of correlation analysis showed that five effective single nucleotide polymorphisms (SNPs) loci (C47T, C94T, C299T, C463T and T575G) were found in the four genes. The lambing number of CC and CT genotypic individuals at FecB C94T locus was significantly higher than that of TT genotypic individuals (45.7 and 46.8%, respectively); the lambing number of CC genotypic individuals at ESR C463T locus was significantly higher than that of CT, TT genotypic individuals (9 and 15%, respectively); There was a positive correlation between CC genotype at C463T locus and cashmere fineness. In this study, the relationship between FecB C94T and ESR C463T loci C alleles and lambing number in LCG was preliminarily revealed. These results further confirmed that FecB and ESR genes may be significantly correlated with high fecundity of LCG.

High-yield synthesis of a tau PET radioligand and its nonradioactive ligand using an alternative protection and deprotection strategy.

Recently developed tau imaging radiopharmaceuticals show specific uptake in tau protein-rich regions in human brains without off-target binding. These radiopharmaceuticals and their nonradioactive reference ligands are generally obtained in low (radio)chemical yields. In the present study, we investigated high-yield synthesis of 18 F-RO948 ([18 F]1) and its nonradioactive ligand (1). The ligand 1 was synthesized by a Suzuki-Miyaura coupling reaction between 9-(4-methoxybenzyl)-9H-pyrrolo[2,3-b:4,5-c']dipyridin-2-yl trifluoromethanesulfonate (3) and 2-fluoro-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyridine (4), followed by oxidative removal of the para-methoxybenzyl (PMB) group with ceric ammonium nitrate (CAN). This two-step reaction gave 1 in 55.8% yield. The precursor for [18 F]1 was synthesized from 3 and 2-nitro-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyridine (6). The resulting PMB-protected precursor 8 was obtained in 74.5% yield. [18 F]1 was synthesized by radiofluorination of 8 (radiochemical conversion (RCC): 95.7 ± 1.7%), followed by deprotection of the PMB group with CAN. This one-pot, two-step radiochemical synthesis followed by HPLC purification gave [18 F]1 in high decay-corrected radiochemical yield (54-60%). The RCC of [18 F]fluoride to [18 F]1 in our two-step synthesis method was similar to that in a one-step radiofluorination reaction of a tert-butoxycarbonyl (BOC)-protected precursor 10 that proceeds with concomitant thermal deprotection of the BOC group. Taken together, the results of this study suggest that this high-yield synthesis method is useful for the synthesis of 18 F-labeled (NH)heteroarene compounds.