Effect of adhesive strategy on resin cement bonding to dentin.

OBJECTIVE: The cement bonding strategy and the polymerization mode can influence the prognosis of indirect restorations. The microtensile bond strength (µTBS) and dentin endogenous enzymatic activity of a dual-cure resin cement (PV5) used in combination with two dentin surface conditioners (accelerator-enhancer primer, TP or universal adhesive, UA) were evaluated. MATERIALS AND METHODS: PV5 was used to lute composite overlays after dentin treatment with TP or UA. The resin cement was self-cured, SC (1 h at 37 °C) or dual-cured, DC (20 s light-cure followed by 15 min self-cure at 37°C). The µTBS test, fractographic analysis, and the in situ zymography evaluations were performed after 24 h (T0 ) or 1 yr (T12 ) of artificial storage. Data were statistically analyzed (α = 0.05). RESULTS: TP/DC obtained the highest adhesive strengths (45 ± 9 and 36.6 ± 8), while UA/SC (17 ± 8 and 11 ± 4) the lowest, both at T0 and T12 , respectively. DC resulted in superior bonding values than the SC, independent of the dentin surface treatment (p < 0.05). The type of adhesive, curing mode and aging influenced the gelatinolytic activity (p < 0.05). CONCLUSIONS: The dual-cure resin cement used in combination with its accelerator-enhancer primer showed superior bonding performances with respect to universal adhesive. Dual-curing the resin cement was determinant to enhance bonding capability over time, independent of the adhesive strategy. CLINICAL RELEVANCE: Clinicians must be aware to faithfully follow manufacturer's recommendation regarding the adhesive strategy suggested with the resin cement used.

The effect of carbodiimide on push-out bond strength of fiber posts and endogenous enzymatic activity.

BACKGROUND: To investigate the effect of 0.3 M 1-ethyl-3(3-dimethylaminopropyl) carbodiimide (EDC) aqueous solution pretreatment on push-out bond strength (PBS) and matrix-metalloproteinases (MMPs) activity within radicular dentin when different post cementation strategies were employed. METHODS: One hundred and twenty monoradicular human teeth were endodontically treated and randomly divided into six groups, depending on the cementation strategy and root dentin pretreatment (n = 20): EAR: cementation with an etch-and-rinse adhesive (LuxaBond Total Etch, DMG) and resin cement (LuxaCore Z Dual, DMG); EAR/EDC: 1 min EDC pretreatment after etching + EAR; SE: cementation with a self-etch primer (Multilink Primer, Ivoclar Vivadent) and corresponding cement (Multilink Automix, Ivoclar Vivadent); SE/EDC: self-etch primer + EDC pretreatment + SE; SA: cementation with a universal self-adhesive cement (RelyX Universal, 3 M); SA/EDC: EDC pretreatment + SA. Slices were submitted to PBS test and interfacial nanoleakage evaluation 24 h after cementation or after thermocycling (40.000 cycles, 5-55 °C). To investigate the effect of EDC on MMPs activity, 4 additional first maxillary premolars per group were processed for in situ zymography analysis. Multivariate ANOVA and post hoc Tukey tests were used to analyze PBS values. The data from in situ zymography were analyzed with Kruskal-Wallis test and Dunn's pairwise multiple comparison procedures (α = 0.05). RESULTS: The variables "EDC pretreatment", "root region" and "thermocycling" significantly influenced PBS (p < 0.05), while the variable "cementation strategy" had no influence (p > 0.05). Thermocycling significantly reduced PBS in SE and SA groups (p < 0.05). EDC was effective in preserving PBS after artificial aging. EDC pretreatment significantly reduced enzymatic activity at baseline in EAR and SE groups, and in SA group after thermocycling (p < 0.05). CONCLUSIONS: The use of EDC prevents the reduction of bond-strength values after artificial aging and silences endogenous enzymatic activity within radicular dentin when different cementation strategies were employed.

Influence of the activation mode on long-term bond strength and endogenous enzymatic activity of dual-cure resin cements.

OBJECTIVE: To investigate the long-term microtensile bond strength (µTBS), interfacial nanoleakage expression (NL), and adhesive stability of dual-cure resin cements with/out light activation to dentin. MATERIALS AND METHODS: Composite overlays (N = 20) were luted to deep dentin surfaces with RelyX Ultimate (RXU, 3M) or Variolink EstheticDC (VAR, Ivoclar-Vivadent). A universal adhesive was used for bonding procedures (iBond universal, Heraeus Kulzer). The resin cements were either self-cured (SC; 1 h at 37 °C) or dual-cured (DC; 20s light-cure followed by 15 min self-cure at 37 °C). Specimens were submitted to µTBS immediately (T0) or after 1 year of laboratory storage (T12). The fracture pattern was evaluated using scanning electron microscopy (SEM). Data were statistically analyzed with two-way ANOVA/Tukey test. Further, the NL was quantified and analyzed (chi-square test) and in situ zymography was performed to evaluate the endogenous enzymatic activity within the hybrid layer (HL) at T0 and T12 (Mann-Whitney test). The significance level for all statistical tests was set at p = 0.05. RESULTS: DC resulted in higher bond strength and decreased fluorescence at the adhesive interface, irrespective of the material and the storage period (p < 0.05). Significantly lower bonding performances (p < 0.05) and higher endogenous enzymatic activity (p < 0.05) were observed within the HL at T12 compared to T0 in all tested groups. CONCLUSIONS: Light-curing the dual-cure resin cements, more than the cement materials, accounted for good bonding performances and higher HL stability over time when used with a universal adhesive. Clinical significance The curing condition influences the bonding performances of dual-cure resin cements to dentin when used with a universal adhesive.

Skin barrier lipid enzyme activity in Netherton patients is associated with protease activity and ceramide abnormalities.

Individuals with Netherton syndrome (NTS) have increased serine protease activity, which strongly impacts the barrier function of the skin epidermis and leads to skin inflammation. Here, we investigated how serine protease activity in NTS correlates with changes in the stratum corneum (SC) ceramides, which are crucial components of the skin barrier. We examined two key enzymes involved in epidermal ceramide biosynthesis, ß-glucocerebrosidase (GBA) and acid-sphingomyelinase (ASM). We compared in situ expression levels and activities of GBA and ASM between NTS patients and controls and correlated the expression and activities with i) SC ceramide profiles, ii) in situ serine protease activity, and iii) clinical presentation of patients. Using activity-based probe labeling, we visualized and localized active epidermal GBA, and a newly developed in situ zymography method enabled us to visualize and localize active ASM. Reduction in active GBA in NTS patients coincided with increased ASM activity, particularly in areas with increased serine protease activity. NTS patients with scaly erythroderma exhibited more pronounced anomalies in GBA and ASM activities than patients with ichthyosis linearis circumflexa. They also displayed a stronger increase in SC ceramides processed via ASM. We conclude that changes in the localization of active GBA and ASM correlate with i) altered SC ceramide composition in NTS patients, ii) local serine protease activity, and iii) the clinical manifestation of NTS.

Reveal the response of enzyme activities to heavy metals through in situ zymography.

Enzymes in the soil are vital for assessing heavy metal soil pollution. Although the presence of heavy metals is thought to change the soil enzyme system, the distribution of enzyme activities in heavy metal polluted-soil is still unknown. For the first time, using soil zymography, we analyzed the distribution of enzyme activities of alfalfa rhizosphere and soil surface in the metal-contaminated soil. The results showed that the growth of alfalfa was significantly inhibited, and an impact that was most pronounced in seedling biomass and chlorophyll content. Catalase activity (CAT) in alfalfa decreased with increasing heavy metal concentrations, while malondialdehyde (MDA) content continually increased. The distribution of enzyme activities showed that both phosphatase and ß-glucosidase activities were associated with the roots and were rarely distributed throughout the soil. In addition, the total hotspot areas of enzyme activities were the highest in extremely heavy pollution soil. The hotspot areas of phosphatase were 3.4%, 1.5% and 7.1% under none, moderate and extremely heavy pollution treatment, respectively, but increased from 0.1% to 0.9% for ß-glucosidase with the increasing pollution levels. Compared with the traditional method of enzyme activities, zymography can directly and accurately reflect the distribution and extent of enzyme activity in heavy metals polluted soil. The results provide an efficient research method for exploring the interaction between enzyme activities and plant rhizosphere.

In situ visualization of glucocerebrosidase in human skin tissue: zymography versus activity-based probe labeling.

Epidermal ß-glucocerebrosidase (GBA1), an acid ß-glucosidase normally located in lysosomes, converts (glucosyl)ceramides into ceramides, which is crucial to generate an optimal barrier function of the outermost skin layer, the stratum corneum (SC). Here we report on two developed in situ methods to localize active GBA in human epidermis: i) an optimized zymography method that is less labor intensive and visualizes enzymatic activity with higher resolution than currently reported methods using either substrate 4-methylumbelliferyl-ß-D-glucopyranoside or resorufin-ß-D-glucopyranoside; and ii) a novel technique to visualize active GBA1 molecules by their specific labeling with a fluorescent activity-based probe (ABP), MDW941. The latter method pro-ved to be more robust and sensitive, provided higher resolution microscopic images, and was less prone to sample preparation effects. Moreover, in contrast to the zymography substrates that react with various ß-glucosidases, MDW941 specifically labeled GBA1. We demonstrate that active GBA1 in the epidermis is primarily located in the extracellular lipid matrix at the interface of the viable epidermis and the lower layers of the SC. With ABP-labeling, we observed reduced GBA1 activity in 3D-cultured skin models when supplemented with the reversible inhibitor, isofagomine, irrespective of GBA expression. This inhibition affected the SC ceramide composition: MS analysis revealed an inhibitor-dependent increase in the glucosylceramide:ceramide ratio.

Moderate inhibition of myocardial matrix metalloproteinase-2 by ilomastat is cardioprotective.

Pharmacological inhibition of matrix metalloproteinase-2 (MMP-2) is a promising target for acute cardioprotection against ischemia/reperfusion injury. Therefore, here we investigated if the MMP inhibitor ilomastat administered either before ischemia or before reperfusion is able to reduce infarct size via inhibition of MMP-2, the most abundant MMP in the rat heart. Infarct-size limiting effect of ilomastat (0.3-6.0µmol/kg) was tested in an in vivo rat model of myocardial infarction induced by 30min coronary occlusion/120min reperfusion. Ilomastat at 0.75 and 1.5µmol/kg decreased infarct size significantly as compared to the vehicle-treated (dimethyl sulfoxide) group (from 66.1±4.6% to 45.3±7.0% and 46.7±5.5% of area at risk, p<0.0.5, respectively), when administered 5min before the onset of ischemia. Ilomastat at 6.0µmol/kg significantly reduced infarct size from its control value of 65.4±2.5% to 52.8±3.7% of area at risk (p<0.05), when administered 5min before the onset of reperfusion. Area at risk was not significantly affected by ilomastat treatments. To further assess the cytoprotective effect of ilomastat, primary cardiomyocytes isolated from neonatal rats were subjected to 240min simulated ischemia followed by 120min simulated reperfusion in the presence of ilomastat (5nM-5µM). Ilomastat at 500nM and 5µM significantly increased cell viability when compared to vehicle treated group. To assess the in situ MMP-2 inhibitory effect of ilomastat, in separate experiments in situ zymography was performed in cardiomyocytes. The cytoprotective concentration of ilomastat (500nM) showed a moderate (approximately 25%) inhibition of intracellular MMP-2 in ischemic/reperfused cardiomyocytes. In these cells, MMP-2 immunostaining showed a 90% colocalization with the in situ gelatinolytic activity. We conclude that the MMP inhibitor ilomastat reduces infarct size when administered either before the onset of ischemia or before the onset of reperfusion in vivo. Furthermore, this is the first demonstration that a moderate inhibition of intracellular MMP-2 is sufficient to confer cardiocytoprotection.

Mechanistic study of the stabilization of dentin-bonded restorative interfaces via collagen reinforcement by multi-acrylamides.

Hydrolytically and enzymatically-stable multi-acrylamides have been proposed to increase the long-term durability of dental adhesive interfaces as alternatives to methacrylates. The aim of this study was to investigate the mechanical and biochemical properties of experimental adhesives containing multi-functional acrylamides concerning collagen reinforcement and metalloproteinases (MMP) activity. Multi-functional acrylamides, TMAAEA (Tris[(2-methylaminoacryl) ethylamine) and DEBAAP (N,N-Diethyl-1,3-bis(acrylamido) propane), along with the commercially available DMAM (N,N-dimethylacrylamide) (monofunctional acrylamide) and HEMA (2-Hydroxyethyl methacrylate) (monofunctional methacrylate - control) were tested for stability against enzymatic hydrolysis by cholesterol esterase/pseudocholinesterase (PC/PCE) solutions for up to 30 days. Collagen-derived substrate and gelatin zymography were performed to examine the effect of the compounds on the biological activity of human recombinant and dentin-extracted gelatinases MMP-2 and MMP-9. In situ zymography was carried out by fluorescent collagen degradation combined with confocal microscopy analysis. Hydroxyproline content was measured in collagen derived from dentin extracts though reaction with Ehrlich's reagent p-dimethylaminobenzaldehyde (DMAB), generating a stable chromophore measured at 550 nm. Storage shear modulus of demineralized dentin discs treated with the tested compounds was measured by oscillatory rheometry, in order to investigate potential collagen reinforcement. FT-IR was performed to determine qualitative differences in collagen based on observed changes in amide bands. The results were analyzed by ANOVA/Tukey's test (α = 0.05). Multi-acrylamides survived 30 days of incubation in cholinesterase/pseudo-cholinesterase (PC/PCE) solutions, while HEMA showed approximately 70 % overall degradation. Incubation with multi-acrylamides reduced collagen degradation as evidenced by the reduced hydroxyproline levels and by the 30 % increase inshear storage modulus. Biochemical and zymography assays showed no noticeable inhibition of recombinant and extracted MMPs enzymatic activity. The infra-red spectroscopy results for multi-functional acrylamides treated samples demonstrated shifts of the amide II bonds and marked increase in intensity of the bands 1200 cm-1, which may indicate partial collagen denaturation and some degree of cross-linking of the compounds with collagen, respectively. The multi-acrylamides exhibited not only comparable mechanical properties but also demonstrated significantly enhanced biochemical stability when compared to the widely used methacrylate control. Clinical relevance: These findings highlight the potential of multi-acrylamides to increase the bonding stability to tissues and, ultimately, contribute to the longevity of dental restorations.

Effects of Etching Time and Ethanol Wet Bonding on Bond Strength and Metalloproteinase Activity in Radicular Dentin.

(1) Background: The objective of this in vitro study was to evaluate the impact of different etching times and ethanol pre-treatments on the immediate bond strength of a hydrophilic multi-mode universal adhesive (Clearfil Universal Bond Quick, Kuraray, UBQ) and on the consequent gelatinolytic activity of metalloproteinases (MMPs) on radicular dentin. (2) Methods: Sixty single-root teeth were selected and divided into four groups according to the adhesive protocol applied for fiber post cementation: (G1) 15 s H3PO4 application + UBQ; (G2) 30 s H3PO4 application + UBQ; (G3) 15 s H3PO4 application + ethanol pre-treatment + UBQ; (G4) 30 s H3PO4 + ethanol pre-treatment + UBQ. After adhesive procedures, fiber posts were luted into the post space with a dual-curing cement (DC Core, Kuraray) and light-cured for 40 s. To perform the push-out test and nanoleakage analyses for both coronal end apical areas, 1 mm slices were prepared, following a 24 h storage period in artificial saliva. Additionally, an in situ zymographic assay was conducted to explore endogenous MMP activity within the radicular layer. Results were statistically analyzed with ANOVA and Tukey post hoc tests. Statistical significance was set at p < 0.05. (3) Result: ANOVA revealed a statistically significant difference in push-out bond strength related to the pre-treatment variable but did not highlight any significance of etching time. Specimens pre-treated with ethanol wet bond application showed higher bond strength (p < 0.01). In situ zymography quantification analyses revealed that all tested groups, independently of etching time end ethanol pre-treatment, activated MMP gelatinolytic activity. A significant increase in MMP activity was detected for the 30 s etching time. However, ETOH pre-treatment significantly reduced MMP activity within the adhesive interface (p < 0.01). (4) Conclusions: The tested adhesive showed similar results regardless of the etching time protocol. The gelatinolytic activity of MMPs was observed in all the groups. Further investigations and extended follow-ups are required to validate the results of the present study in vivo.

Can Carbodiimide (EDC) and Chitosan Cross-linking Agents Effect the Longevity of Fiberglass Posts Luted with Different Types of Composite Cements to Root Dentin?

PURPOSE: To evaluate the effect of carbodiimide (EDC) and chitosan (CHI) on the enzymatic activity (EA) and bond strength (BS) of different composite cements to root dentin. MATERIALS AND METHODS: Ninety (90) maxillary canines were sectioned, standardizing the length of the roots. The roots were endodontically treated, prepared, divided into 3 groups according to dentin treatment (distilled water [DW], CHI 0.2 wt%, or EDC 0.5M), and further subdivided into 3 subgroups according to composite cement (RelyX ARC [3M Oral Care], Panavia F 2.0 [Kuraray Noritaki], or RelyX U200 [3M Oral Care]). Of the slices obtained by sectioning, the most cervical of each third were subjected to a push-out test and the most apical were subjected to in-situ zymography. Half of the slices were analyzed immediately, and the other half after 6 months. The results were analyzed with ANOVA or the chi-squared test. RESULTS: RelyX ARC showed higher BS associated with CHI, while RelyX U200 showed higher BS associated with EDC (p = 0.044). For Panavia F 2.0, the treatment did not influence BS (p > 0.05). For the cervical and middle thirds, no differences were observed between the cements, while the apical third revealed higher BS for RelyX U200 (p < 0.001). The highest percentage of adhesive-to-dentin failures was observed for Panavia F 2.0. EDC showed the lowest percentage of adhesive-to-dentin failures. According to zymographic analysis, DW and CHI showed greater fluorescence for RelyX ARC, while EDC exhibited the lowest fluorescence of all cements (p > 0.05). CONCLUSION: The different mechanisms of action of solutions for pre-treatment of intraradicular dentin yielded different results depending on the adhesive used. EDC resulted in higher bond strength and higher enzyme inhibition for RelyX U200, while the treatment with chitosan resulted in higher bond strength and lower enzymatic activity for RelyX ARC. Although EDC and chitosan treatments did not influence the bond strength for Panavia F 2.0, both resulted in higher enzyme inhibition for this composite cement.

A new quantitative insight: Interaction of polyethylene microplastics with soil - microbiome - crop.

In this study, the interaction between primary/secondary PE MPs and soil - microbiome - crop complex system and PE MPs enrichment behavior in crops were studied by using the self-developed quantitative characterization method of Eu-MPs and in situ zymography. The results demonstrated for the first time the enrichment effect of micron-sized PE (> 10 µm) in crops, manifested as roots>leaves>stems. Primary PE MPs significantly increased soil TN, TC, SOM and ß-glu activity and inhibited Phos activity. Age-PE MPs significantly reduced soil TN, TP, ß-glu and Phos activities and also have significant inhibitory effects on plant height, stem diameter, and leaf dry weight of maize. Age-PE MPs significantly affected soil microbial diversity, mainly caused by bacterial genera such as UTCFX1, Sphingomonas, Subgroup-6 and Gemmatimonas. Age-PE MPs also affected some metabolism related to microbial community composition and maize growth, including Glycerolipid, Citrate cycle (TCA cycle), C5-Branched dibasic acid, Arginine and proline, Tyrosine metabolism, pentose phosphate pathway, Valine, leucine and isoleucine biosynthesis. These research results indicated that the PE MPs, which are widely present in farmland soils, can affect crop growth, soil microbial community and metabolic function after aging, thus affecting agroecosystems and terrestrial biodiversity.

Novel Ex Vivo Zymography Approach for Assessment of Protease Activity in Tissues with Activatable Antibodies.

Proteases are involved in the control of numerous physiological processes, and their dysregulation has been identified in a wide range of pathologies, including cancer. Protease activity is normally tightly regulated post-translationally and therefore cannot be accurately estimated based on mRNA or protein expression alone. While several types of zymography approaches to estimate protease activity exist, there remains a need for a robust and reliable technique to measure protease activity in biological tissues. We present a novel quantitative ex vivo zymography (QZ) technology based on Probody® therapeutics (Pb-Tx), a novel class of protease-activated cancer therapeutics that contain a substrate linker cleavable by tumor-associated proteases. This approach enables the measurement and comparison of protease activity in biological tissues via the detection of Pb-Tx activation. By exploiting substrate specificity and selectivity, cataloguing and differentiating protease activities is possible, with further refinement achieved using protease-specific inhibitors. Using the QZ assay and human tumor xenografts, patient tumor tissues, and patient plasma, we characterized protease activity in preclinical and clinical samples. The QZ assay offers the potential to increase our understanding of protease activity in tissues and inform diagnostic and therapeutic development for diseases, such as cancer, that are characterized by dysregulated proteolysis.

Chlorhexidine preserves the hybrid layer in vitro after 10-years aging.

OBJECTIVE: The present study investigated the ability of a chlorhexidine (CHX)-containing primer (0.2% aqueous solution) to inhibit dentinal enzymes, preserve the hybrid layer (HL) and remain within the HL, after 10 years of aging in artificial saliva at 37°C. METHODS: Non-carious extracted molars were assigned to two groups, cut into slabs exposing middle/deep dentin, etched and bonded with Adper Scotchbond 1XT (SB1XT) with or without 0.2% CHX aqueous solution pretreatment. Composite build-ups were made, and the specimens were cut in 1-mm thick bonded sticks. In situ zymography was performed on freshly prepared specimens (T0) and specimens aged for 10 years (T10-yr) at 37°C in artificial saliva, to investigate endogenous gelatinolytic activity within the HL. At T10-yr, specimens were also decalcified and embedded in epoxy resin for TEM analysis. Micro-Raman spectroscopy was performed at T0 and T10-yr to evaluate the chemical profiles in intertubular dentin and the HL. RESULTS: In situ zymography showed less pronounced enzymatic activity in the CHX-pretreated group (p<0.05) regardless of aging, maintaining a similar level of fluorescence at T0 and T10-yr (p>0.05). TEM results showed that 98% of the HL had been degraded in the control group, while 95% of the HL was intact in the experimental group. Moreover, all the Raman spectra peaks assigned to CHX could be identified only in the CHX-pretreated group (T0 and T10-yr). SIGNIFICANCE: In vitro, CHX remains in the HL after 10 years with its inhibitory effect preserved. This may be the underlying factor for HL preservation after this long aging period.

Carbodiimide inactivation of matrix metalloproteinases in radicular dentine.

OBJECTIVES: The present in vitro study evaluated the effect of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC), a cross-linking agent used as an additional therapeutic primer for luting fiber posts to radicular dentine to prevent hybrid layer degradation. METHODS: Root canal treatment was performed on 80 extracted single-rooted human teeth. A 10-mm post space was prepared and pecimens were randomly assigned to four groups (n=20) according to the bonding system: 1) All Bond 3 (Bisco); 2) All Bond 3 + 0.3M EDC; 3) Prime&Bond XP (Dentsply Sirona); 4) Prime&Bond XP + 0.3M EDC. In groups 2 and 4, EDC was applied on phosphoric acid-etched dentine for 1 min. Fiber posts (RelyX Fiber Post, 3M ESPE) were luted with a dual-cured resin cement (Core-X flow, Dentsply Sirona). Slices were prepared for micro push-out test and interfacial nanoleakage evaluation of the coronal and apical region of the canal space after 24 h and 1 year storage in artificial saliva. In-situ zymography was performed to investigate endogenous matrix metalloproteinase activities within the hybrid layer. Results were statistically analysed with three-way ANOVA test or Chi Square test. Statistical significance was set at α=0.05. RESULTS: No significant influence was identified between the two adhesives. The use of EDC significantly improved fiber post bond strength at 1 year but not at 24 h. Application of 0.3 M EDC prior to bonding significantly reduced gelatinolytic activities within the radicular hybrid layers. CONCLUSIONS: Carbodiimide was effective in preserving fibre post bond strength over time, through reducing the activities of intra-radicular endogenous proteases. CLINICAL SIGNIFICANCE: Inhibition of matrix metalloproteinases using EDC over radicular dentin could play an important role in bond strength preservation. However, the clinical relevance of these findings needs to be proven.

Effect of benzalkonium chloride on dentin bond strength and endogenous enzymatic activity.

OBJECTIVE: This in vitro study evaluated at baseline (T0) and over time (T12 months), the effect of a multi-mode universal adhesive compared with two experimental formulations blended with different concentrations of benzalkonium chloride (BAC), on bond strength and endogenous enzymatic activity. METHODS AND MATERIALS: Specimens were assigned to the following groups according to the adhesive protocol: G1) All-Bond Universal (ABU) self-etch (SE); G2) ABU + 0.5% BAC SE; G3) ABU + 1% methacrylate BAC SE; G4) ABU etch-and-rinse (E&R); G5) ABU + 0.5% BAC E&R; G6) ABU + 1% methacrylate BAC E&R. Gelatin zymography was performed on dentin powder obtained from eight human third molars. Endogenous enzymatic activity within the hybrid layer was examined using in situ zymography after 24 h (T0) or 1-year storage in artificial saliva (T12). Forty intact molars were prepared for microtensile bond strength test at T0 and T12. Results were statistically analyzed with three-way ANOVA (α = 0.05). RESULTS: Gelatin zymography assay and in situ zymography quantification analyses indicated that all the BAC-containing formulations decreased matrix metalloproteinase expression. However, in situ zymography showed a general trend of enzymatic activity increase after aging. Microtensile bond-strength testing showed decrease in bond strength over time in all the tested groups; performances of the 1% methacrylate BAC experimental groups were worse than the control. CONCLUSIONS: BAC-containing adhesives reduce endogenous enzymatic activity both immediately and over time. However, independently from the adhesive employed, increase in the gelatinolytic activity over time and decrease in bond strength was found (especially in the BAC + 1% methacrylate groups), probably due to impaired polymerization properties. CLINICAL SIGNIFICANCE: Adhesives containing protease inhibitors are practical and efficient tools in clinical practice for enhancement of the longevity of dental restorations. However, extensive investigation of the mechanical and adhesive properties of the material is necessary prior to their clinical use.

Long-term nanomechanical properties and gelatinolytic activity of titanium tetrafluoride-treated adhesive dentin interface.

OBJECTIVE: This study investigated the effects of dentin pretreatment with 2.5% titanium tetrafluoride (TiF4) on nanomechanical properties, and the in situ gelatinolytic activity of the dentin-resin interface, for up to 6 months. METHODS: Twenty-four human teeth were prepared by exposing occlusal flat dentin surfaces, and were randomly assigned to experimental groups, according to application or non-application of a TiF4 pretreatment, and to the adhesive systems (Clearfil SE Bond or Scotchbond Universal). Resin composite (Filtek Supreme Ultra) was built up incrementally on the teeth in all the groups. Then, the specimens were sectioned and randomly selected for evaluation at 24h, 3 months and 6 months of storage time. The reduced modulus of elasticity (Er) and the nanohardness of the underlying dentin, as well as the hybrid layer and the adhesive layer were measured using a nanoindenter. Gelatinolytic activity at the dentin-resin interfaces was assessed by in situ zymography using quenched fluorescein-conjugated gelatin at 24h and 6 months. Statistical analyses were performed with ANOVA and Tukey's tests. RESULTS: There were no differences in Er and nanohardness values between adhesives systems and pretreatment (p=0.1250). In situ zymography showed significantly higher gelatinolytic activity after 6 months for all the experimental groups (p=0.0004), but no differences between the adhesive systems (p=0.7708) and the surface pretreatment (p=0.4877). SIGNIFICANCE: Dentin pretreatment with 2.5% TiF4 followed by self-etching adhesive systems did not influence nanomechanical properties or gelatinolytic activity of the adhesive-dentin interface layers, over time.

Grape Seed Extract Reduces Active Gelatinases Using an Etch-and-Rinse Mode Universal Adhesive.

PURPOSE: To examine the effect of grape seed extract (GSE) pretreatment on the reduction of active gelatinases when using universal adhesives in etch-and-rinse mode. MATERIALS AND METHODS: Fifty extracted non-carious human teeth were used in this study. Dentin powder was prepared for analysis of active MMP-2 by ELISA. Resin-dentin slices were prepared for in situ zymography in order to localize active gelatinases by quenched fluorescein-conjugated gelatin under a confocal microscope. Fluorescence intensity was analyzed quantitatively. Specimens were allocated into 6 groups: a non-treated control, phosphoric acid etched (PA), PA followed by Single Bond Universal (SBU, 3M Oral Care) or G-Premio Bond (GPB, GC), and PA followed by GSE for 1 min prior to SBU or GPB. The data were analyzed with one-way ANOVA and Bonferroni's test at a significance level of 0.05. RESULTS: Application of the universal adhesives SBU and GPB in etch-and-rinse mode reduced active MMP-2 in dentin matrices. However, the only further significant reduction was found in GPB pre-treated with GSE, as analyzed by ELISA. In situ zymography demonstrated the location of active gelatinases, and fluorescence intensity analysis confirmed significant reduction of active gelatinases in the hybrid layer of GPB pre-teated with GSE compared to GPB alone. CONCLUSION: The present study demonstrated the potential advantage of applying GSE to reduce active gelatinases especially at the hybrid layer, with greater benefit achieved for hydrophobic adhesives. Nevertheless, the mechanism of action, analysis of bond strength, and long-term efficacy require further study.

In situ analysis of gelatinolytic activity in human dentin.

Matrix metalloproteinases (MMPs) such as gelatinases are differentially expressed in human tissues. These enzymes cleave specific substrates involved in cell signaling, tissue development and remodeling and tissue breakdown. Recent evidences show that gelatinases are crucial for normal dentin development and their activity is maintained throughout the entire tooth function in the oral cavity. Due to the lack of information about the exact location and activity of gelatinases in mature human dentin, the present study was designed to examine gelatinolytic levels in sound dentin. In situ zymography using confocal microscopy was performed on both mineralized and demineralized dentin samples. Sites presenting gelatinase activity were identified throughout the entire biological tissue pursuing different gelatinolytic levels for distinct areas: predentin and dentinal tubule regions presented higher gelatinolytic activity compared to intertubular dentin. Dentin regions with higher gelatinolytic activity immunohistochemically were partially correlated with MMP-2 expression. The maintenance of gelatinolytic activity in mature dentin may have biological implications related to biomineralization of predentin and tubular/peritubular dentinal regions, as well as regulation of defensive mechanisms of the dentin-pulp complex.

Ex vivo Follicle Rupture and in situ Zymography in Drosophila.

Ovulation, the process of releasing a mature oocyte from the ovary, is crucial for animal reproduction. In order for the process of ovulation to occur, a follicle must be fully matured and signaled to rupture from the ovary. During follicle rupture in both mammals and Drosophila, somatic follicle cells are enzymatically degraded to allow the oocyte to be liberated from the follicle. Here, we describe a detailed protocol of our newly developed ex vivo follicle rupture assay in Drosophila, which represents a first assay allowing direct quantification of follicles' capacity to respond to ovulation stimuli and rupture. This assay can be modified to stimulate rupture with other reagents (for example, ionomycin) or to query enzymatic activity (in situ zymography). In addition, this assay allows genetic or pharmacological screens to identify genes or small molecules regulating follicle rupture in Drosophila.

Collagenolytic Activity Is Associated with Scar Resolution in Zebrafish Hearts after Cryoinjury.

Myocardial infarction is the major cause of cardiac injury in western countries and can result in a massive loss of heart cells, leading eventually to heart failure. A fibrotic collagen-rich scar may prevent ventricular wall rupture, but also may result in heart failure because of its stiffness. In zebrafish, cardiac cryoinjury triggers a fibrotic response and scarring. Unlike with mammals, zebrafish heart has the striking ability to regenerate and to resolve the scar. Thus, understanding the mechanisms of scar resolution in zebrafish heart might facilitate the design of new therapeutic approaches to improve the recovery of patients. To visualize the collagenolytic activity within the zebrafish heart following cryoinjury, we used an in situ collagen zymography assay. We detected expression of mmp2 and mmp14a and these matrix metalloproteinases might contribute to the collagenase activity. Collagenolytic activity was present in the wound area, but decreased as the myocardium regenerated. Comparison with neonatal mouse hearts that failed to regenerate after transmural cryoinjury revealed a similar collagenolytic activity in the scar. These findings suggest that collagenolytic activity may be key to how the zebrafish heart resolves its scar; however, it is not sufficient in mouse hearts that lack efficient myocardial regeneration.