Reliability of an intraoral extension for intraoral palpation and assessment of mechanical sensitivity of the temporal tendon.

BACKGROUND: The temporal tendon is a structure often compromised in patients suffering from temporomandibular disorders (TMD), yet its intraoral location makes a standardised assessment difficult. OBJECTIVES: To evaluate the variability and accuracy to target force of a newly designed intraoral extension for a palpometer device (Palpeter, Sunstar Suisse) when compared to manual palpation, in addition to clinically assessing the mechanical sensitivity and referred sensations of the temporal tendon in healthy individuals. METHODS: Experiment 1: 12 individuals were asked to target on a scale 0.5, 1 and 2 kg, for 2 and 5 s by using five different methods (Palpeter, Palpeter with three different extension shapes and manual palpation). Experiment 2: 10 healthy participants were recruited for a randomised double-blinded assessment by applying pressure of 0.5, 1 and 2 kg to the right temporal tendon with the three extensions and manual palpation. Participants rated the intensity of their sensation/pain on a 0-50-100 numeric rating scale (NRS), unpleasantness on a 0-100 NRS, and if present, they rated and drew the location of referred sensations. Repeated measures analysis of variance (ANOVA) was used in both experiments to compare differences between palpation methods. Tukey's HSD tests were used for the post hoc comparisons, and p values below .05 were considered significant. RESULTS: Experiment 1: The extensions showed no significant differences between them regarding reliability and accuracy for all forces and durations (p > .05). The manual method was significantly less reliable and accurate when compared to the other methods (p < .05). Experiment 2: There were no significant differences between the Palpeter extensions regarding pain intensity or unpleasantness NRS scores (p > .05), but all the extensions had significantly increased pain intensity and unpleasantness when compared to manual palpation (p < .05). Similarly, the frequency of referred sensations was similar between extensions but increased when compared to manual palpation. CONCLUSIONS: The new Palpeter extensions proved to be significantly more accurate and have lower test-retest variability than the manual method in a non-clinical setting. Clinically, they showed no significant differences in NRS scores for pain intensity nor unpleasantness, with no major differences in referred sensations, making any of the extensions suitable for clinical testing of the temporal tendon in future studies.

High-Density Energetic Materials with Low Mechanical Sensitivity and Twinning Derived from Nitroimidazole Fused Ring.

The innovative synthesis of 3,8-dibromo-2,9-dinitro-5,6-dihydrodiimidazo [1,2-a:2',1'-c]pyrazine and 3,9-dibromo-2,10-dinitro-6,7-dihydro-5H-diimidazo [1,2-a:2',1'-c][1,4]diazepine is described in this study. The tricyclic fused molecular structures are formed by the respective amalgamation of piperazine and homopiperazine with the imidazole ring containing nitro. Compound 1 and 2 possess excellent high-density physical properties (ρ1 = 2.49 g/cm3, ρ2 = 2.35 g/cm3) due to the presence of a fused ring structure and Br atom. In addition to their high density, they have high decomposition temperatures (Td > 290 °C) which means that they have excellent thermal stability and can be used as potential heat-resistant explosives. Low mechanical sensitivities (IS > 40 J, FS > 360 N) are observed. The twinning structure of 2 was resolved by X-ray diffraction. Non-covalent interaction analysis, Hirshfeld surfaces, 2D fingerprint plot, and Electrostatic potential analysis were used to understand the intramolecular interactions in relation to physicochemical properties. The unique structures of this type of compound provide new potential for the evolution of energetic materials.

Experiment and Molecular Dynamic Simulation on Interactions between 3,4-Bis(3-nitrofurazan-4-yl) Furoxan (DNTF) and Some Low-Melting-Point Explosives.

3,4-bis(3-nitrofurazan-4-yl) furoxan (DNTF) is an explosive with excellent performance, and the use of DNTF as a high-energy component is of great significance for improving the comprehensive performance of weapons. To explore the effect of DNTF on low-melting-point molten carrier explosives, the compatibility between DNTF and other low-melting-point explosives was analyzed by differential scanning calorimetry, and mechanical sensitivity was tested. The compatibility and cohesive energy density between DNTF and other low-melting-point explosives were calculated by Materials Studio. The results showed that DNTF has good compatibility with most low-melting-point explosives, and the peak temperature change of the mixed system formed by melt-casting is not obvious. Among them, DNTF has the best compatibility with MTNP, TNT, and DNAN; moderate compatibility with DFTNAN and DNP; and the worst compatibility with DNMT. The sensitivity test results indicate that the combination of DNTF and TNT has the most significant reduction in mechanical sensitivity. DFTNAN and MTNP have better stability than DNTF and can generate strong interaction forces with DNTF. Other low-melting-point explosives mixed with DNTF have lower intermolecular forces than DNTF. The DNTF/MTNP system requires the most energy to phase change when heated compared to other mixed systems and is the least sensitive to heat. The DNTF/DNMT system has the lowest cohesive energy density and is the most sensitive to heat.

Non-nociceptive and nociceptive-like trigeminal Aß-afferent neurons of rats: Distinct electrophysiological properties, mechanical and chemical sensitivity.

The role of Aß-afferents in somatosensory function is often oversimplified as low threshold mechanoreceptors (LTMRs) with large omission of Aß-afferent involvement in nociception. Recently, we have characterized Aß-afferent neurons which have large diameter somas in the trigeminal ganglion (TG) and classified them into non-nociceptive and nociceptive-like TG afferent neurons based on their electrophysiological properties. Here, we extend our previous observations to further characterize electrophysiological properties of trigeminal Aß-afferent neurons and investigate their mechanical and chemical sensitivity by patch-clamp recordings from large-diameter TG neurons in ex vivo TG preparations of adult male and female rats. Based on cluster analysis of electrophysiological properties, trigeminal Aß-afferent neurons can be classified into five discrete types (type I, IIa, IIb, IIIa, and IIIb), which responded differentially to mechanical stimulation and sensory mediators including serotonin (5-HT), acetylcholine (ACh) and adenosine triphosphate (ATP). Notably, type I neuron action potential (AP) was small in amplitude, width was narrow in duration, and peak dV/dt repolarization was great with no deflection observed, whereas discretely graded differences were observed for type IIa, IIb, IIIa, and IIIb, as AP increased in amplitude, width broadened in duration, and peak dV/dt repolarization reduced with the emergence of increasing deflection. Type I, IIa, and IIb neurons were mostly mechanically sensitive, displaying robust and rapidly adapting mechanically activated current (IMA) in response to membrane displacement, while IIIa and IIIb, conversely, were almost all mechanically insensitive. Interestingly, mechanical insensitivity coincided with increased sensitivity to 5-HT and ACh. Together, type I, IIa and IIb display features of LTMR Aß-afferent neurons while type IIIa and type IIIb show properties of nociceptive Aß-afferent neurons.

Facile Recrystallization Process for Tuning the Crystal Morphology and Thermal Safety of Industrial Grade PYX.

In this study, the crystal appearance of industrial grade 2,6-diamino-3,5-dinitropyridine (PYX) was mostly needle-shaped or rod-shaped with an average aspect ratio of 3.47 and roundness of 0.47. According to national military standards, the explosion percentage of impact sensitivity s about 40% and friction sensitivity is about 60%. To improve loading density and pressing safety, the solvent-antisolvent method was used to optimize the crystal morphology, i.e., to reduce the aspect ratio and increase the roundness value. Firstly, the solubility of PYX in DMSO, DMF, and NMP was measured by the static differential weight method, and the solubility model was established. The results showed that the Apelblat equation and Van't Hoff equation could be used to clarify the temperature dependence of PYX solubility in a single solvent. Scanning electron microscopy (SEM) was used to characterize the morphology of the recrystallized samples. After recrystallization, the aspect ratio of the samples decreased from 3.47 to 1.19, and roundness increased from 0.47 to 0.86. The morphology was greatly improved, and the particle size decreased. The structures before and after recrystallization were characterized by infrared spectroscopy (IR). The results showed that no chemical structure changes occurred during recrystallization, and the chemical purity was improved by 0.7%. According to the GJB-772A-97 explosion probability method, the mechanical sensitivity of explosives was characterized. After recrystallization, the impact sensitivity of explosives was significantly reduced from 40% to 12%. A differential scanning calorimeter (DSC) was used to study the thermal decomposition. The thermal decomposition temperature peak of the sample after recrystallization was 5 °C higher than that of the raw PYX. The thermal decomposition kinetic parameters of the samples were calculated by AKTS software, and the thermal decomposition process under isothermal conditions was predicted. The results showed that the activation energy (E) of the samples after recrystallization was higher by 37.9~527.6 kJ/mol than raw PYX, so the thermal stability and safety of the recrystallized samples were improved.

Oral cancer patients experience mechanical and chemical sensitivity at the site of the cancer.

INTRODUCTION: Oral cancer patients suffer severe chronic and mechanically-induced pain at the site of the cancer. Our clinical experience is that oral cancer patients report new sensitivity to spicy foods. We hypothesized that in cancer patients, mechanical and chemical sensitivity would be greater when measured at the cancer site compared to a contralateral matched normal site. METHODS: We determined mechanical pain thresholds (MPT) on the right and left sides of the tongue of 11 healthy subjects, and at the cancer and contralateral matched normal site in 11 oral cancer patients in response to von Frey filaments in the range of 0.008 to 300 g (normally not reported as painful). We evaluated chemical sensitivity in 13 healthy subjects and seven cancer patients, who rated spiciness/pain on a visual analog scale in response to exposure to six paper strips impregnated with capsaicin (0-10 mM). RESULTS: Mechanical detection thresholds (MDT) were recorded for healthy subjects, but not MPTs. By contrast, MPTs were measured at the site of the cancer in oral cancer patients (7/11 patients). No MPTs were measured at the cancer patients' contralateral matched normal sites. Measured MPTs were correlated with patients' responses to the University of California Oral Cancer Pain Questionnaire. Capsaicin sensitivity at the site of the cancer was evident in cancer patients by a leftward shift of the cancer site capsaicin dose-response curve compared to that of the patient's contralateral matched normal site. We detected no difference in capsaicin sensitivity on the right and left sides of tongues of healthy subjects. CONCLUSIONS: Mechanical and chemical sensitivity testing was well tolerated by the majority of oral cancer patients. Sensitivity is greater at the site of the cancer than at a contralateral matched normal site.

Mechanical sensitivity changes in pericranial muscles after local anesthesia and experimentally induced pain in the temporalis tendon: Implications for headache and facial pain.

OBJECTIVES: To assess changes in mechanical sensitivity of the pericranial muscles in healthy individuals after a local anesthetic block of the temporalis tendon. In addition, to assess, if experimentally induced temporalis tendon pain, can lead to an increase in mechanical sensitivity of the pericranial muscles and reports of headache. METHODS: 40 healthy participants were recruited for this randomized, double-blinded, controlled experiment, and were randomly injected with mepivacaine and isotonic saline into the dominant-side temporalis tendon in two different sessions, and either nerve growth factor (n = 20) or isotonic saline (n = 20) in a third session. Mechanical sensitivity was assessed in the temporalis, masseter, and trapezius muscles as well as in the temporalis tendon, on the dominant side, before and 10 minutes after each injection, and in a fourth session two days after the third session. Pain drawings and headache diaries were kept for 30 days after the final session to register any developing pain or headache. RESULTS: Mepivacaine injection into the temporalis tendon caused a significant decrease in mechanical sensitivity in the temporal tendon (-54.5%) and the masseter (-15.4%) muscle (P < 0.05) but not the temporalis (-12.1%) and trapezius muscles (-12.7%) (P > 0.05). Nerve growth factor injection into the temporalis tendon caused a significant increase in mechanical sensitivity in the tendon (+15.4%) and masseter muscle (+14.4%) (P < 0.05) but not the temporalis (+2.8%) or trapezius muscles (+3.1%) (P > 0.05). A significant increase was found for headache frequency in the first seven days (P < 0.05) after nerve growth factor injection compared to after isotonic saline injection, but not intensity (P > 0.05). CONCLUSION: These findings suggest that the therapeutic effect of temporalis tendon anesthetic injections on facial pain and headaches are most likely not only due to a direct effect of the local anesthetic on the temporalis tendon but rather to a more generalized block of the nerves in the area. In addition, the temporal tendon may contribute to the pathophysiological processes of headache.

Standardized palpation of the temporalis muscle evoke referred pain and sensations in individuals without TMD.

OBJECTIVES: This study aimed to determine if standardized palpations of the temporalis muscle evoke referred pain and/or sensations in individuals without TMD. MATERIALS AND METHODS: This was a randomized, single-blinded study. The mechanical sensitivity of the right temporalis muscle was assessed in 32 participants without TMD with nine different stimulations to 15 test sites using palpometers (different stimulus intensities (0.5, 1.0, and 2.0 kg) and durations (2, 5, and 10 s). After each stimulus, participants were asked to score perceived pain intensity and intensity of unpleasantness on a 0-100 numeric rating scale as an indicator of mechanical sensitivity in the temporalis muscle and to indicate any areas of referred pain/sensations on a body chart. RESULTS: Pain intensity significantly differed between palpation durations, intensities, and test sites (P < 0.001). In contrast, unpleasantness significantly differed between palparation duration and intensities (P < 0.001), but not test sites. Participants more frequently reported referred pain/sensations evoked by the 10-s (34.4%) as opposed to the 2-s (6.3%) and 5-s (15.6%) palpation duration at the 2.0-kg stimulus intensity (P < 0.05). CONCLUSIONS: Our present results indicate that referred pain/sensations in the orofacial region can be evoked by standardized palpation of the temporalis muscle and influenced by the palpation duration in individuals without TMD. CLINICAL RELEVANCE: Referred pain/sensations from the temporalis muscle were duration- and intensity-dependent processes originating from local stimuli.

Measuring strain in the exoskeleton of spiders-virtues and caveats.

The measurement of cuticular strain during locomotion using foil strain gauges provides information both on the loads of the exoskeleton bears and the adaptive value of the specific location of natural strain detectors (slit sense organs). Here, we critically review available literature. In tethered animals, by applying loads to the metatarsus tip, strain and mechanical sensitivity (S = strain/load) induced at various sites in the tibia were determined. The loci of the lyriform organs close to the tibia-metatarsus joint did not stand out by high strain. The strains induced at various sites during free locomotion can be interpreted based on S and, beyond the joint region, on beam theory. Spiders avoided laterad loading of the tibia-metatarsus joint during slow locomotion. Balancing body weight, joint flexors caused compressive strain at the posterior and dorsal tibia. While climbing upside down strain measurements indicate strong flexor activity. In future studies, a precise calculation and quantitative determination of strain at the sites of the lyriform organs will profit from more detailed data on the overall strain distribution, morphology, and material properties. The values and caveats of the strain gauge technology, the only one applicable to freely moving spiders, are discussed.

Nitro-, Cyano-, and Methylfuroxans, and Their Bis-Derivatives: From Green Primary to Melt-Cast Explosives.

In the present work, we studied in detail the thermochemistry, thermal stability, mechanical sensitivity, and detonation performance for 20 nitro-, cyano-, and methyl derivatives of 1,2,5-oxadiazole-2-oxide (furoxan), along with their bis-derivatives. For all species studied, we also determined the reliable values of the gas-phase formation enthalpies using highly accurate multilevel procedures W2-F12 and/or W1-F12 in conjunction with the atomization energy approach and isodesmic reactions with the domain-based local pair natural orbital (DLPNO) modifications of the coupled-cluster techniques. Apart from this, we proposed reliable benchmark values of the formation enthalpies of furoxan and a number of its (azo)bis-derivatives. Additionally, we reported the previously unknown crystal structure of 3-cyano-4-nitrofuroxan. Among the monocyclic compounds, 3-nitro-4-cyclopropyl and dicyano derivatives of furoxan outperformed trinitrotoluene, a benchmark melt-cast explosive, exhibited decent thermal stability (decomposition temperature >200 °C) and insensitivity to mechanical stimuli while having notable volatility and low melting points. In turn, 4,4'-azobis-dicarbamoyl furoxan is proposed as a substitute of pentaerythritol tetranitrate, a benchmark brisant high explosive. Finally, the application prospects of 3,3'-azobis-dinitro furoxan, one of the most powerful energetic materials synthesized up to date, are limited due to the tremendously high mechanical sensitivity of this compound. Overall, the investigated derivatives of furoxan comprise multipurpose green energetic materials, including primary, secondary, melt-cast, low-sensitive explosives, and an energetic liquid.

Design and Mechanical Sensitivity Analysis of a MEMS Tuning Fork Gyroscope with an Anchored Leverage Mechanism.

This paper presents the design and analysis of a new micro-electro-mechanical system (MEMS) tuning fork gyroscope (TFG), which can effectively improve the mechanical sensitivity of the gyroscope sense-mode by the designed leverage mechanism. A micromachined TFG with an anchored leverage mechanism is designed. The dynamics and mechanical sensitivity of the design are theoretically analyzed. The improvement rate of mechanical sensitivity (IRMS) is introduced to represent the optimization effect of the new structure compared with the conventional one. The analytical solutions illustrate that the IRMS monotonically increases with increased stiffness ratio of the power arm (SRPA) but decreases with increased stiffness ratio of the resistance arm (SRRA). Therefore, three types of gyro structures with different stiffness ratios are designed. The mechanical sensitivities increased by 79.10%, 81.33% and 68.06% by theoretical calculation. Additionally, FEM simulation demonstrates that the mechanical sensitivity of the design is in accord with theoretical results. The linearity of design is analyzed, too. Consequently, the proposed new anchored leverage mechanism TFG offers a higher displacement output of sense mode to improve the mechanical sensitivity.

Time course of ongoing activity during neuritis and following axonal transport disruption.

Local nerve inflammation (neuritis) leads to ongoing activity and axonal mechanical sensitivity (AMS) along intact nociceptor axons and disrupts axonal transport. This phenomenon forms the most feasible cause of radiating pain, such as sciatica. We have previously shown that axonal transport disruption without inflammation or degeneration also leads to AMS but does not cause ongoing activity at the time point when AMS occurs, despite causing cutaneous hypersensitivity. However, there have been no systematic studies of ongoing activity during neuritis or noninflammatory axonal transport disruption. In this study, we present the time course of ongoing activity from primary sensory neurons following neuritis and vinblastine-induced axonal transport disruption. Whereas 24% of C/slow Aδ-fiber neurons had ongoing activity during neuritis, few (<10%) A- and C-fiber neurons showed ongoing activity 1-15 days following vinblastine treatment. In contrast, AMS increased transiently at the vinblastine treatment site, peaking on days 4-5 (28% of C/slow Aδ-fiber neurons) and resolved by day 15. Conduction velocities were slowed in all groups. In summary, the disruption of axonal transport without inflammation does not lead to ongoing activity in sensory neurons, including nociceptors, but does cause a rapid and transient development of AMS. Because it is proposed that AMS underlies mechanically induced radiating pain, and a transient disruption of axonal transport (as previously reported) leads to transient AMS, it follows that processes that disrupt axonal transport, such as neuritis, must persist to maintain AMS and the associated symptoms. NEW & NOTEWORTHY Many patients with radiating pain lack signs of nerve injury on clinical examination but may have neuritis, which disrupts axonal transport. We have shown that axonal transport disruption does not induce ongoing activity in primary sensory neurons but does cause transient axonal mechanical sensitivity. The present data complete a profile of key axonal sensitivities following axonal transport disruption. Collectively, this profile supports that an active peripheral process is necessary for maintained axonal sensitivities.

Effects of nerve growth factor experimentally-induced craniofacial muscle sensitization on referred pain frequency and number of headache days: A double-blind, randomized placebo-controlled study.

OBJECTIVE: To assess if repeated intramuscular injections of nerve growth factor into the temporalis and masseter muscles increase mechanical sensitivity and entropy scores. Furthermore, to investigate if increased mechanical sensitivity would lead to increased prevalence of referred pain in the studied individuals. Finally, if increased muscle sensitization would lead to an increase in number of headache days during the experimental period. METHODS: The present double-blind, randomized placebo-controlled study recruited 16 healthy participants who were injected with nerve growth-factor, on 2 days, into the masseter and temporalis muscles and isotonic saline on the contralateral side. Mechanical sensitivity was assessed at seven different time-points (total of 21 days) by application of three different forces to 15 different sites of both muscles. Participants were asked after each force application if they experienced referred pain and were asked to keep a headache diary during the experimental period. RESULTS: In summary, a) repeated intramuscular injections of nerve-growth-factor caused an increase in mechanical sensitivity for the masseter but not the temporalis muscle, and an increase in entropy scores when compared to the isotonic saline side. b) Both referred pain frequency and number of headache days were not increased following nerve-growth-factor injections. CONCLUSIONS: These findings support the idea that mechanical sensitization in the masseter and temporalis muscles differs following injections of nerve growth factor. Furthermore, referred pain and headache frequency do not seem to be related to nerve growth factor sensitization in this model. These findings support the idea that in healthy individuals referred pain may be an epiphenomenon of the muscle in response to noxious input.

Cutaneous neurturin overexpression alters mechanical, thermal, and cold responsiveness in physiologically identified primary afferents.

Neurotrophic factors play an important role in the regulation of functional properties of sensory neurons under normal and pathological conditions. The GDNF family member neurturin is one such factor that has been linked to modulating responsiveness to peripheral stimuli. Neurturin binds to the GFRα2 receptor, a receptor found primarily in isolectin B4-expressing polymodal cutaneous nociceptors. Previous work has shown that knockout of GFRα2 alters heat, but not mechanical, responses in dissociated sensory neurons and reduces pain-related behaviors during the second phase of the formalin test. Research has also shown that overexpression of neurturin in basal keratinocytes increases behavioral responsiveness to mechanical stimulation and innocuous cooling of the skin without affecting noxious heat responses. Here we directly examined the impact of neurturin overexpression on cutaneous afferent function. We compared physiological responses of individual sensory neurons to mechanical and thermal stimulation of the skin, using an ex vivo skin-nerve-dorsal root ganglion-spinal cord preparation produced from neurturin-overexpressing (NRTN/OE) mice and wild-type littermate controls. We found that neurturin overexpression increases responsiveness to innocuous mechanical stimuli in A-fiber nociceptors, alters thermal responses in the polymodal subpopulation of C-fiber sensory neurons, and changes the relative numbers of mechanically sensitive but thermally insensitive C-fiber afferents. These results demonstrate the potential roles of different functional groups of sensory neurons in the behavioral changes observed in mice overexpressing cutaneous neurturin and highlight the importance of neurturin in regulating cutaneous afferent response properties.NEW & NOTEWORTHY GDNF family neurotrophic factors regulate the development and function of primary sensory neurons. Of these, neurturin has been shown to modulate mechanical and cooling sensitivity behaviorally. Here we show that overexpression of neurturin in basal keratinocytes regulates mechanical responsiveness in A-fiber primary sensory neurons while increasing the overall numbers of cold-sensing units. Results demonstrate a crucial role for cutaneous neurturin in modulating responsiveness to peripheral stimuli at the level of the primary afferent.

CXCR4 signaling in macrophages contributes to periodontal mechanical hypersensitivity in Porphyromonas gingivalis-induced periodontitis in mice.

Background Periodontitis is an inflammatory disease accompanied by alveolar bone loss and progressive inflammation without pain. However, the potential contributors eliminating pain associated with gingival inflammation are unknown. Results we examined the involvement of CXC chemokine receptor type 4 (CXCR4) on the mechanical sensitivity of inflamed periodontal tissue, using a mouse model of periodontitis established by the ligation of the tooth cervix of a maxillary second molar and inoculation with Porphyromonas gingivalis (P. gingivalis). Infiltration of inflammatory cells into gingival tissue was not observed following the inoculation. Under light anesthesia, the mechanical head withdrawal threshold (MHWT) on the buccal gingiva was measured using an electronic von Frey anesthesiometer. No significant changes in MHWT were observed in the mice with P. gingivalis-induced periodontitis during the experimental period. Continuous administration of CXCR4 neutralizing antibody to the gingival tissue significantly decreased MHWT and increased the number of gingival CXCR4 immunoreactive macrophages in the periodontitis group. Nitric oxide metabolites in the gingival tissue were significantly increased after the inoculation of P. gingivalis and were reduced by gingival CXCR4 neutralization. Gingival L-arginine administration induced gingival mechanical allodynia in naive animals. Moreover, the decrease in MHWT after treatment with P. gingivalis and CXCR4 neutralization was partially reversed by nitric oxide synthase inhibition in the gingival tissue. Nuclear factor-kappa B was expressed in infiltrating macrophages after inoculation of P. gingivalis and administration of the nuclear factor-kappa B activator betulinic acid induced gingival mechanical allodynia in naive mice. Conclusions These findings suggest that CXCR4 signaling inhibits nitric oxide release from infiltrating macrophages and is involved in modulation of the mechanical sensitivity in the periodontal tissue in P. gingivalis-induced periodontitis.

Mechanical sensibility of nociceptive and non-nociceptive fast-conducting afferents is modulated by skin temperature.

The ability to distinguish mechanical from thermal input is a critical component of peripheral somatosensory function. Polymodal C fibers respond to both stimuli. However, mechanosensitive, modality-specific fast-conducting tactile and nociceptor afferents theoretically carry information only about mechanical forces independent of the thermal environment. We hypothesize that the thermal environment can nonetheless modulate mechanical force sensibility in fibers that do not respond directly to change in temperature. To study this, fast-conducting mechanosensitive peripheral sensory fibers in male Sprague-Dawley rats were accessed at the soma in the dorsal root ganglia from T11 or L4/L5. Neuronal identification was performed using receptive field characteristics and passive and active electrical properties. Neurons responded to mechanical stimuli but failed to generate action potentials in response to changes in temperature alone, except for the tactile mechanical and cold sensitive neurons. Heat and cold ramps were utilized to determine temperature-induced modulation of response to mechanical stimuli. Mechanically evoked electrical activity in non-nociceptive, low-threshold mechanoreceptors (tactile afferents) decreased in response to changes in temperature while mechanically induced activity was increased in nociceptive, fast-conducting, high-threshold mechanoreceptors in response to the same changes in temperature. These data suggest that mechanical activation does not occur in isolation but rather that temperature changes appear to alter mechanical afferent activity and input to the central nervous system in a dynamic fashion. Further studies to understand the psychophysiological implications of thermal modulation of fast-conducting mechanical input to the spinal cord will provide greater insight into the implications of these findings.

Mechanical stimulation enhanced estrogen receptor expression and callus formation in diaphyseal long bone fracture healing in ovariectomy-induced osteoporotic rats.

UNLABELLED: Estrogen receptor (ER) in ovariectomy-induced osteoporotic fracture was reported to exhibit delayed expression. Mechanical stimulation enhanced ER-α expression in osteoporotic fracture callus at the tissue level. ER was also found to be required for the effectiveness of vibrational mechanical stimulation treatment in osteoporotic fracture healing. INTRODUCTION: Estrogen receptor(ER) is involved in mechanical signal transduction in bone metabolism. Its expression was reported to be delayed in osteoporotic fracture healing. The purpose of this study was to investigate the roles played by ER during osteoporotic fracture healing enhanced with mechanical stimulation. METHODS: Ovariectomy-induced osteoporotic SD rats that received closed femoral fractures were divided into five groups, (i) SHAM, (ii) SHAM-VT, (iii) OVX, (iv) OVX-VT, and (v) OVX-VT-ICI, where VT stands for whole-body vibration treatment and ICI for ER antagonization by ICI 182,780. Callus formation and gene expression were assessed at 2, 4, and 8 weeks postfracture. In vitro osteoblastic differentiation, mineralization, and ER-α expression were assessed. RESULTS: The delayed ER expression was found to be enhanced by vibration treatment. Callus formation enhancement was shown by callus morphometry and micro-CT analysis. Enhancement effects by vibration were partially abolished when ER was modulated by ICI 182,780, in terms of callus formation capacity at 2-4 weeks and ER gene and protein expression at all time points. In vitro, ER expression in osteoblasts was not enhanced by VT treatment, but osteoblastic differentiation and mineralization were enhanced under estrogen-deprived condition. When osteoblastic cells were modulated by ICI 182,780, enhancement effects of VT were eliminated. CONCLUSIONS: Vibration was able to enhance ER expression in ovariectomy-induced osteoporotic fracture healing. ER was essential in mechanical signal transduction and enhancement in callus formation effects during osteoporotic fracture healing enhanced by vibration. The enhancement of ER-α expression by mechanical stimulation was not likely to be related to the increased expression in osteoblastic cells but rather to the systemic enhancement in recruitment of ER-expressing progenitor cells through increased blood flow and neo-angiogenesis. This finding might explain the observed difference in mechanical sensitivity of osteoporotic fracture to mechanical stimulation.

Mechanical sensitivity reveals evolutionary dynamics of mechanical systems.

A classic question in evolutionary biology is how form-function relationships promote or limit diversification. Mechanical metrics, such as kinematic transmission (KT) in linkage systems, are useful tools for examining the evolution of form and function in a comparative context. The convergence of disparate systems on equivalent metric values (mechanical equivalence) has been highlighted as a source of potential morphological diversity under the assumption that morphology can evolve with minimal impact on function. However, this assumption does not account for mechanical sensitivity-the sensitivity of the metric to morphological changes in individual components of a structure. We examined the diversification of a four-bar linkage system in mantis shrimp (Stomatopoda), and found evidence for both mechanical equivalence and differential mechanical sensitivity. KT exhibited variable correlations with individual linkage components, highlighting the components that influence KT evolution, and the components that are free to evolve independently from KT and thereby contribute to the observed pattern of mechanical equivalence. Determining the mechanical sensitivity in a system leads to a deeper understanding of both functional convergence and morphological diversification. This study illustrates the importance of multi-level analyses in delineating the factors that limit and promote diversification in form-function systems.

Reactive oxygen species and lipid peroxidation inhibitors reduce mechanical sensitivity in a chronic neuropathic pain model of spinal cord injury in rats.

Chronic neuropathic pain is a common consequence of spinal cord injury (SCI), develops over time and negatively impacts quality of life, often leading to substance abuse and suicide. Recent evidence has demonstrated that reactive oxygen species (ROS) play a role in contributing to neuropathic pain in SCI animal models. This investigation examines four compounds that reduce ROS and the downstream lipid peroxidation products, apocynin, 4-oxo-tempo, U-83836E, and tirilazad, and tests if these compounds can reduce nocioceptive behaviors in chronic SCI animals. Apocynin and 4-oxo-tempo significantly reduced abnormal mechanical hypersensitivity measured in forelimbs and hindlimbs in a model of chronic SCI-induced neuropathic pain. Thus, compounds that inhibit ROS or lipid peroxidation products can be used to ameliorate chronic neuropathic pain. We propose that the application of compounds that inhibit reactive oxygen species (ROS) and related downstream molecules will also reduce the behavioral measures of chronic neuropathic pain. Injury or trauma to nervous tissue leads to increased concentrations of ROS in the surviving tissue. Further damage from ROS molecules to dorsal lamina neurons leads to membrane excitability, the physiological correlate of chronic pain. Chronic pain is difficult to treat with current analgesics and this research will provide a novel therapy for this disease.

Bioinspired Fabrication of an Insensitive Ammonium Perchlorate Core-Shell Composite with Polydopamine Coating.

In this research, an ammonium perchlorate/polydopamine (AP/PDA) core-shell composite was prepared in a non-aqueous solution to reduce the mechanical sensitivity of ammonium perchlorate (AP). The result showed that the AP/PDA core-shell composite could be successfully constructed in ethyl acetate solution with an AP recovery rate that reached 86%. The mechanical sensitivity of the obtained AP/PDA core-shell composite was significantly reduced with a PDA content of only 0.76%. The DSC and TG also indicated that the coating of PDA showed catalytic activity in the thermal decomposition of AP with a lower decomposition temperature and a decreased Ea value of AP. Thus, this study proposed a simple strategy for achieving a good balanced between harnessing the energy and ensuring the safety of ammonium perchlorate by significantly reducing its mechanical sensitivity by using a very low polydopamine coating layer content, and this shows great potential for the design and fabrication of insensitive energetic composites for use in propellants.