Micro and Nanoscale Technologies for Diagnosis of Viral Infections.

Viral infection is one of the leading causes of mortality worldwide. The growth of globalization significantly increases the risk of virus spreading, making it a global threat to future public health. In particular, the ongoing coronavirus disease 2019 (COVID-19) pandemic outbreak emphasizes the importance of devices and methods for rapid, sensitive, and cost-effective diagnosis of viral infections in the early stages by which their quick and global spread can be controlled. Micro and nanoscale technologies have attracted tremendous attention in recent years for a variety of medical and biological applications, especially in developing diagnostic platforms for rapid and accurate detection of viral diseases. This review addresses advances of microneedles, microchip-based integrated platforms, and nano- and microparticles for sampling, sample processing, enrichment, amplification, and detection of viral particles and antigens related to the diagnosis of viral diseases. Additionally, methods for the fabrication of microchip-based devices and commercially used devices are described. Finally, challenges and prospects on the development of micro and nanotechnologies for the early diagnosis of viral diseases are highlighted.

Effect of Different Fluids on Rectified Motion of Leidenfrost Droplets on Micro/Sub-Micron Ratchets.

Leidenfrost droplets, liquid droplets placed on a hot flat surface above the Leidenfrost temperature of the liquid, are an interesting model system to understand and achieve frictionless motion of droplets on a surface. Controlled unidirectional motion of otherwise random Leidenfrost droplets can be achieved by replacing the flat surface by a surface with topological ratchets. In this study, we show how an increase in the vapor layer thickness below the Leidenfrost droplet influences the droplet motion for underlying ratchets with various periods ranging from 1.5mm down to 800nm. This was exploited by systematically studying the Leidenfrost droplet motion of various liquids with low boiling points including acetone, isopropanol, and R134a on the aforementioned various ratchets. For all liquids with boiling points lower than water, no unidirectional motion was observed for 800 nm. This indicates that the asymmetric vapor flow beneath the Leidenfrost droplet becomes negligible due to the large vapor layer thickness relative to the ratchet depth. However, unidirectional droplet motion was still observed for the micron and millimeter scale ratchets even when the ratchet surface temperature was increased up to 360°C and 230°C for acetone and isopropanol, respectively. This can be attributed to the insulating property of the thick vapor layer which prevent the droplet from producing more vapor with increasing temperature. We also report the effect of the ratchet period on the droplet motion at room temperature using R134a droplets.

The Design and Analysis of the Fabrication of Micro- and Nanoscale Surface Structures and Their Performance Applications from a Bionic Perspective.

This paper comprehensively discusses the fabrication of bionic-based ultrafast laser micro-nano-multiscale surface structures and their performance analysis. It explores the functionality of biological surface structures and the high adaptability achieved through optimized self-organized biomaterials with multilayered structures. This study details the applications of ultrafast laser technology in biomimetic designs, particularly in preparing high-precision, wear-resistant, hydrophobic, and antireflective micro- and nanostructures on metal surfaces. Advances in the fabrications of laser surface structures are analyzed, comparing top-down and bottom-up processing methods and femtosecond laser direct writing. This research investigates selective absorption properties of surface structures at different scales for various light wavelengths, achieving coloring or stealth effects. Applications in dirt-resistant, self-cleaning, biomimetic optical, friction-resistant, and biocompatible surfaces are presented, demonstrating potential in biomedical care, water-vapor harvesting, and droplet manipulation. This paper concludes by highlighting research frontiers, theoretical and technological challenges, and the high-precision capabilities of femtosecond laser technology in related fields.

Insights into mechanism and modelling of dynamic moisture sorption in dual-porous insulation materials with micro- and nano-scale pores.

HYPOTHESIS: Understanding moisture sorption in porous insulation materials is challenging due to the influence of multiscale pore structures on phase behavior and transport properties. Dynamic moisture sorption in dual-porous materials is likely co-determined by interior micro- and nano-scale pores, and an accurate physical model for predicting moisture evolution can be developed by clarifying the sorption mechanisms. EXPERIMENTS: Moisture behavior during the dynamic sorption of dual-porous insulation material is measured by low-field nuclear magnetic resonance (NMR) experiments. The contributions of micro- and nano-scale pores to the adsorbed moisture are differentiated using NMR relaxometry, and the evolution of moisture morphology is quantitatively analyzed. FINDINGS: Analysis of T2 evolution reveals that the moisture in nano-scale pores alters from adsorption layers to liquid with increasing relative humidity (RH), while minimal sorption occurs in micro-scale pores. Moisture is mainly transferred as vapor molecules at low RH levels, with the dynamic sorption enhanced by molecular diffusion in micro-scale pores. Capillary flow in nano-scale pores dominates moisture transport when RH rises above a threshold, leading to a significant increase in apparent moisture diffusivity. According to the elucidated mechanism, a physical model is further developed to predict moisture sorption inside dual-porous insulation materials, and it may serve as a basis for evaluating and optimizing the performance of dual-porous systems in different environments.

Powering and Fabrication of Small-Scale Robotics Systems.

PURPOSE OF REVIEW: The increasing number of contributions in the field of small-scale robotics is significantly associated with the progress in material science and process engineering during the last half century. With the objective of integrating the most optimal materials for the propulsion of these motile micro- and nanosystems, several manufacturing strategies have been adopted or specifically developed. This brief review covers some recent advances in materials and fabrication of small-scale robots with a focus on the materials serving as components for their motion and actuation. RECENT FINDINGS: Integration of a wealth of materials is now possible in several micro- and nanorobotic designs owing to the advances in micro- and nanofabrication and chemical synthesis. Regarding light-driven swimmers, novel photocatalytic materials and deformable liquid crystal elastomers have been recently reported. Acoustic swimmers are also gaining attention, with several prominent examples of acoustic bubble-based 3D swimmers being recently reported. Magnetic micro- and nanorobots are increasingly investigated for their prospective use in biomedical applications. The adoption of different materials and novel fabrication strategies based on 3D printing, template-assisted electrodeposition, or electrospinning is briefly discussed. SUMMARY: A brief review on fabrication and powering of small-scale robotics is presented. First, a concise introduction to the world of small-scale robotics and their propulsion by means of magnetic fields, ultrasound, and light is provided. Recent examples of materials and fabrication methodologies for the realization of these devices follow thereafter.

[Self-assembly in the transparent droplets formed during the screening of protein self-assembly conditions].

Protein self-assemblies at the micro- and nano-scale are of great interest because of their morphological diversity and good biocompatibility. High-throughput screening of protein self-assembly at different scales and morphologies using protein crystallization screening conditions is an emerging method. When using this method to screen protein self-assembly conditions, some apparently transparent droplets are often observed, in which it is not clear whether self-assembly occurs. We explored the interaction between ß-lactoglobulin and the protein crystallization kit Index™ C10 and observed the presence of micro- and nano-scale protein self-assemblies in the transparent droplets. The diverse morphology of the micro- and nano-scale self-assemblies in the transparent droplets formed by mixing different initial concentrations of ß-lactoglobulin and Index™ C10 was further investigated by scanning electron microscope. Self-assembly process of fluorescence-labelled ß-lactoglobulin was monitored continuously by laser confocal microscope, allowing real-time observation of the liquid-liquid phase separation phenomenon and the morphology of the final self-assemblies. The internal structure of the self-assemblies was gradually ordered over time by in-situ X-ray diffraction. This indicates that the self-assembly phenomenon within transparent droplets, observed in protein self-assembly condition screening experiments, is worthy of further in-depth exploration.

Plastic pollution during COVID-19: Plastic waste directives and its long-term impact on the environment.

Majority of the million tons of plastic produced each year is being disposed after single-use. Plastic bottle, bags, food containers, gloves, and cup that end up in landfills and environment could linger for hundreds to thousands of years. Moreover, COVID-19 pandemic caused by the novel coronavirus (SARS-CoV-2), will also exacerbate the global plastic pollution as the use of personal protective equipment (PPE i.e., gloves, masks) became mandatory to prevent the spread of the virus. Plastic eventually breaking down in micro & nanoscopic bits due to physical or chemical or biological actions in the environment, can enter animal and human food web. So, plastic management programs need to be more robust with a focus on the prevention of the micro and nanoplastics entrance into the environment and food web. In the present pandemic situation, it is even more necessary to know about how much plastic waste is being generated and how different countries are coping up with their plastic waste management. In this review, we have elucidated how global plastic production rise during COVID-19 and how it would contribute to short and long-term impacts on the environment. Plastic pollution during the pandemic will increase the GHS emissions in the incineration facilities. Improper disposal of plastics into the oceans and lands would endanger the marine species and subsequently human lives. We have also assessed how the increased plastic pollution will aggravate the micro and nanoscale plastic problem, which have now become an emerging concern. This review will be helpful for people to understand the plastic usage and its subsequent consequences in the environment in a pandemic like COVID-19.

Micro and nanoscale technologies in oral drug delivery.

Oral administration is a pillar of the pharmaceutical industry and yet it remains challenging to administer hydrophilic therapeutics by the oral route. Smart and controlled oral drug delivery could bypass the physiological barriers that limit the oral delivery of these therapeutics. Micro- and nanoscale technologies, with an unprecedented ability to create, control, and measure micro- or nanoenvironments, have found tremendous applications in biology and medicine. In particular, significant advances have been made in using these technologies for oral drug delivery. In this review, we briefly describe biological barriers to oral drug delivery and micro and nanoscale fabrication technologies. Micro and nanoscale drug carriers fabricated using these technologies, including bioadhesives, microparticles, micropatches, and nanoparticles, are described. Other applications of micro and nanoscale technologies are discussed, including fabrication of devices and tissue engineering models to precisely control or assess oral drug delivery in vivo and in vitro, respectively. Strategies to advance translation of micro and nanotechnologies into clinical trials for oral drug delivery are mentioned. Finally, challenges and future prospects on further integration of micro and nanoscale technologies with oral drug delivery systems are highlighted.

Nanoscale Electrical Potential and Roughness of a Calcium Phosphate Surface Promotes the Osteogenic Phenotype of Stromal Cells.

Mesenchymal stem cells (MSCs) and osteoblasts respond to the surface electrical charge and topography of biomaterials. This work focuses on the connection between the roughness of calcium phosphate (CP) surfaces and their electrical potential (EP) at the micro- and nanoscales and the possible role of these parameters in jointly affecting human MSC osteogenic differentiation and maturation in vitro. A microarc CP coating was deposited on titanium substrates and characterized at the micro- and nanoscale. Human adult adipose-derived MSCs (hAMSCs) or prenatal stromal cells from the human lung (HLPSCs) were cultured on the CP surface to estimate MSC behavior. The roughness, nonuniform charge polarity, and EP of CP microarc coatings on a titanium substrate were shown to affect the osteogenic differentiation and maturation of hAMSCs and HLPSCs in vitro. The surface EP induced by the negative charge increased with increasing surface roughness at the microscale. The surface relief at the nanoscale had an impact on the sign of the EP. Negative electrical charges were mainly located within the micro- and nanosockets of the coating surface, whereas positive charges were detected predominantly at the nanorelief peaks. HLPSCs located in the sockets of the CP surface expressed the osteoblastic markers osteocalcin and alkaline phosphatase. The CP multilevel topography induced charge polarity and an EP and overall promoted the osteoblast phenotype of HLPSCs. The negative sign of the EP and its magnitude at the micro- and nanosockets might be sensitive factors that can trigger osteoblastic differentiation and maturation of human stromal cells.

Soft Actuators for Small-Scale Robotics.

This review comprises a detailed survey of ongoing methodologies for soft actuators, highlighting approaches suitable for nanometer- to centimeter-scale robotic applications. Soft robots present a special design challenge in that their actuation and sensing mechanisms are often highly integrated with the robot body and overall functionality. When less than a centimeter, they belong to an even more special subcategory of robots or devices, in that they often lack on-board power, sensing, computation, and control. Soft, active materials are particularly well suited for this task, with a wide range of stimulants and a number of impressive examples, demonstrating large deformations, high motion complexities, and varied multifunctionality. Recent research includes both the development of new materials and composites, as well as novel implementations leveraging the unique properties of soft materials.

Silicon Substrate Strained and Structured via Cavitation Effect for Photovoltaic and Biomedical Application.

A hybrid structure, which integrates the nanostructured silicon with a bio-active silicate, is fabricated using the method of MHz sonication in the cryogenic environment. Optical, atomic force, and scanning electron microscopy techniques as well as energy dispersive X-ray spectroscopy were used for the investigation of the morphology and chemical compound of the structured surface. Micro-Raman as well as X-ray diffraction, ellipsometry, and photovoltage spectroscopy was used for the obtained structures characterization. Ellipsometer measurements demonstrated the formation of the layer with the thicknesses ~700 nm and optical parameters closed to SiO2 compound with an additional top layer of the thicknesses ~15 nm and the refractive index ~1. Micro-Raman investigation detects an appearance of Ca-O local vibrational mode, and the stretching vibration of SiO4 chains characterized the wollastonite form of CaSiO3. A significant rise in the value and an expansion of the spectral range of the surface photovoltage for silicon structured via the megasonic processing was found. The concept of biocompatible photovoltaic cell on the base of Si\CaSiO3 structure for the application in bioelectronics was proposed.