Characterization of nanoscale atomic motion of Si in polycrystalline Cu layer.

Atomic migration of silicon through grain boundaries of a thin polycrystalline Cu film and island formation on the Cu surface were studied in the temperature range of 403-520 K. Samples used in these experiments was prepared on Si(111) wafers by room temperature magnetron sputtering and they consisted of amorphous Si layer (80 nm) and polycrystalline Cu layer (40 nm). The silicon layer served as the source layer of diffusion, while the copper surface was the accumulation surface. Detection of Si atoms on the accumulation surface after penetration through the Cu layer was made by low energy ion scattering spectroscopy and the grain boundary diffusion coefficient DGB was determined from the appearance time. The depth distribution of Si in the Cu film was analysed by secondary neutral mass spectroscopy. From this depth distribution, DGB was also determined. By scanning probe microscope and electron microscope measurements, it was experimentally detected that Si atoms on the Cu surface did not form a continuous layer. Instead, amorphous Si islands were formed at the accumulation surface with surface protrusions in their centres.

Sub-10 nm Mixing and Alloying of Cu-Ag and Cu-Ni via Accelerated Solid Diffusion.

Development of nanoscale multicomponent solid inorganic materials is often hindered by slow solid diffusion kinetics and poor precursor mixing in conventional solid-state synthesis. These shortcomings can be alleviated by combining nanosized precursor mixtures and low temperature reaction, which could reduce crystal growth and accelerate the solid diffusion at the same time. However, high throughput production of nanoparticle mixtures with tunable composition via conventional synthesis is very challenging. In this work, we demonstrate that ∼10 nm homogeneous mixing of sub-10 nm nanoparticles can be achieved via spark nanomixing at room temperature and pressure. Kinetically driven Spark Plasma Discharge nanoparticle generation and ambient processing conditions limit particle coarsening and agglomeration, resulting in sub-10 nm primary particles of as-deposited films. The intimate mixing of these nanosized precursor particles enables intraparticle diffusion and formation of Cu/Ni nanoalloy during subsequent low temperature annealing at 100 °C. We also discovered that cross-particle diffusion is promoted during the low-temperature sulfurization of Cu/Ag which tends to phase-segregate, eventually leading to the growth of sulfide nanocrystals and improved homogeneity. High elemental homogeneity, small diffusion path lengths, and high diffusibility synergically contribute to faster diffusion kinetics of sub-10 nm nanoparticle mixtures. The combination of ∼10 nm homogeneous precursors via spark nanomixing, low-temperature annealing, and a wide range of potentially compatible materials makes our approach a good candidate as a general platform toward accelerated solid state synthesis of nanomaterials.

A Covalent Organic Framework Membrane with Homo Hierarchical Pores for Confined Reactive Crystallization.

Gas-liquid (G-L) reactive crystallization is a major technology for advanced materials construction, which requires a short diffusion path on the interface to ensure the reactant supply and stable crystal nucleation under ultrahigh supersaturation. Herein, a covalent organic framework (COF) membrane with homo hierarchical pore structures was proposed as an effective interfacial material for the regulation of confined reactive crystallization. By combining the ordered nanopores of COFs and micropores of anodic aluminum oxide (AAO), the COF membrane simultaneously provided an excellent nanoscale diffusion-reaction regulation network as the molecular-level confined G-L reactive interface and adjustable submicrometer gas mass transfer channels. The highly selective construction of CaCO3 superstructures was then achieved. When the submicrometer primary pore size rp of the constructed COF membrane ranged from 120 to 1.6 nm, the diffusion mechanism of CO2 varied from viscous flow diffusion to Knudsen diffusion. The growth orientation of CaCO3 crystals was well confined to obtain spindle-shaped crystals with high selectivity. Meanwhile, the crystal selectivity factor (cube/sphere) increased from 0 to 3.53 under the low interfacial nuclear barrier. Thus, the COF membrane with coupled micro-nanostructures successfully screened the directional preparation conditions for diverse CaCO3 superstructures, which also paved a meaningful path for the functional application of COFs in accurate mass transfer control and confined chemical reactions.

Finite-Size Charged Species Diffusion and pH Change in Nanochannels.

Molecular transport through nanofluidic structures exhibits properties that are unique at the nanoscale. The high surface-to-volume ratio of nanometer-sized confined spaces renders particle interactions with the surface of central importance. The electrical double layer (EDL) at the solid-liquid interface of charged surfaces generates an enrichment of counterions and the exclusion of co-ions that lead to a change in their diffusivity. In addition, the diffusive transport is altered by steric and hydrodynamic interactions between fluid molecules and the boundaries. An extensive body of literature investigates molecular transport at the nanoscale. However, most studies account for ionic species as point charges, severely limiting the applicability of the results to "large" nanofluidic systems. Moreover, and even more importantly, the change of pH in the nanoconfined region inside nanochannels has been completely overlooked. Corroborated by experimental data, here we present an all-encompassing analysis of molecular diffusion from the micro- to the ultra-nanoscale. While accounting for finite-size ions, we compute self-consistently the pH inside the channels. Surprisingly, we found that the concentration of ions H+ can change by more than 2 orders of magnitude compared to the bulk, hugely affecting molecular transport. Further, we found that counterions exhibit both enrichment and exclusion, depending on the size of nanochannels. Achieving a greater understanding of the effective transport properties of fluids at the nanoscale will fill the gap in knowledge that still limits development of innovative systems for medicine and industrial applications alike.

Sustained Administration of Hormones Exploiting Nanoconfined Diffusion through Nanochannel Membranes.

Implantable devices may provide a superior means for hormone delivery through maintaining serum levels within target therapeutic windows. Zero-order administration has been shown to reach an equilibrium with metabolic clearance, resulting in a constant serum concentration and bioavailability of released hormones. By exploiting surface-to-molecule interaction within nanochannel membranes, it is possible to achieve a long-term, constant diffusive release of agents from implantable reservoirs. In this study, we sought to demonstrate the controlled release of model hormones from a novel nanochannel system. We investigated the delivery of hormones through our nanochannel membrane over a period of 40 days. Levothyroxine, osteocalcin and testosterone were selected as representative hormones based on their different molecular properties and structures. The release mechanisms and transport behaviors of these hormones within 3, 5 and 40 nm channels were characterized. Results further supported the suitability of the nanochannels for sustained administration from implantable platforms.