Hot carrier extraction from 2D semiconductor photoelectrodes.

Hot carrier-based energy conversion systems could double the efficiency of conventional solar energy technology or drive photochemical reactions that would not be possible using fully thermalized, "cool" carriers, but current strategies require expensive multijunction architectures. Using an unprecedented combination of photoelectrochemical and in situ transient absorption spectroscopy measurements, we demonstrate ultrafast (<50 fs) hot exciton and free carrier extraction under applied bias in a proof-of-concept photoelectrochemical solar cell made from earth-abundant and potentially inexpensive monolayer (ML) MoS2. Our approach facilitates ultrathin 7 Å charge transport distances over 1 cm2 areas by intimately coupling ML-MoS2 to an electron-selective solid contact and a hole-selective electrolyte contact. Our theoretical investigations of the spatial distribution of exciton states suggest greater electronic coupling between hot exciton states located on peripheral S atoms and neighboring contacts likely facilitates ultrafast charge transfer. Our work delineates future two-dimensional (2D) semiconductor design strategies for practical implementation in ultrathin photovoltaic and solar fuel applications.

Molecular Additives Improve the Selectivity of CO2 Photoelectrochemical Reduction over Gold Nanoparticles on Gallium Nitride.

Photoelectrochemical CO2 reduction (CO2R) is an appealing solution for converting carbon dioxide into higher-value products. However, CO2R in aqueous electrolytes suffers from poor selectivity due to the competitive hydrogen evolution reaction that is dominant on semiconductor surfaces in aqueous electrolytes. We demonstrate that functionalizing gold/p-type gallium nitride devices with a film derived from diphenyliodonium triflate suppresses hydrogen generation from 90% to 18%. As a result, we observe increases in the Faradaic efficiency and partial current density for carbon monoxide of 50% and 3-fold, respectively. Furthermore, we demonstrate through optical absorption measurements that the molecular film employed herein, regardless of thickness, does not affect the photocathode's light absorption. Altogether, this study provides a rigorous platform for elucidating the catalytic structure-property relationships to enable engineering of active, stable, and selective materials for photoelectrochemical CO2R.

Stable Photoelectrochemical Reactions at Solid/Solid Interfaces toward Solar Energy Conversion and Storage.

Electrochemistry has extended from reactions at solid/liquid interfaces to those at solid/solid interfaces. However, photoelectrochemistry at solid/solid interfaces has been hardly reported. In this study, we achieve a stable photoelectrochemical reaction at the semiconductor-electrode/solid-electrolyte interface in a Nb-doped anatase-TiO2 (a-TiO2:Nb)/Li3PO4 (LPO)/Li all-solid-state cell. The oxidative currents of a-TiO2:Nb/LPO/Li increase upon light irradiation when a-TiO2:Nb is located at a potential that is more positive than its flat-band potential. This is because the photoexcited electrons migrate to the current collector due to the bending of the conduction band minimum toward the negative potential. The photoelectrochemical reaction at the semiconductor/solid-electrolyte interface is driven by the same principle as those at semiconductor/liquid-electrolyte interfaces. Moreover, oxidation under light irradiation exhibits reversibility with reduction in the dark. Thus, we extend photoelectrochemistry to all-solid-state systems composed of solid/solid interfaces. This extension would enable us to investigate photoelectrochemical phenomena uncleared at solid/liquid interfaces because of low stability and durability.

Off-Grid Electrogenerated Chemiluminescence with Customized p-i-n Photodiodes.

Electrochemiluminescence (ECL) is the generation of light induced by an electrochemical reaction, driven by electricity. Here, an all-optical ECL (AO-ECL) system is developped, which triggers ECL by the illumination of electrically autonomous "integrated" photoelectrochemical devices immersed in the electrolyte. Because these systems are made using small and cheap devices, they can be easily prepared and readily used by any laboratories. They are based on commercially available p-i-n Si photodiodes (≈1 € unit-1), coupled with well-established ECL-active and catalytic materials, directly coated onto the component leads by simple and fast wet processes. Here, a Pt coating (known for its high activity for reduction reactions) and carbon paint (known for its optimal ECL emission properties) are deposited at cathode and anode leads, respectively. In addition to its optimized light absorption properties, using the commercial p-i-n Si photodiode eliminates the need for a complicated manufacturing process. It is shown that the device can emit AO-ECL by illumination with polychromatic (simulated sunlight) or monochromatic (near IR) light sources to produce visible photons (425 nm) that can be easily observed by the naked eye or recorded with a smartphone camera. These low-cost off-grid AO-ECL devices open broad opportunities for remote photodetection and portable bioanalytical tools.

Hematite Hollow-Sphere-Array Photoanodes for Efficient Photoelectrochemical Water Splitting.

Constructing 3D nanophotonic structures is regarded as an effective method to realize efficient solar-to-hydrogen conversion. These photonic structures can enhance the absorbance of photoelectrodes by the light trapping effect, promote the charge separation by designable charge transport pathway and provide a high specific surface area for catalytic reaction. However, most 3D structures reported so far mainly focused on the influence of light absorption and lacked a systematic investigation of the overall water splitting process. Herein, hematite hollow-sphere-array photoanodes are fabricated through a facile hydrothermal method with polystyrene templates. Validating by simulations and experiments, the hollow sphere array is proved to enhance the efficiency of light harvesting, charge separation and surface reaction at the same time. With an additional annealing treatment in oxygen, a photocurrent density of 2.26 mA cm-2 at 1.23 V versus reversible hydrogen electrode can be obtained, which is 3.70 times larger than that with a planar structure in otherwise the same system. This work gains an insight into the photoelectrochemical water splitting process, which is valuable for the further design of advancing solar driven water splitting devices.

Engineering Directional Charge Carrier Transport Using Ferroelectric Polarization for Enhanced Photoelectrochemical Water Oxidation.

Introducing ferroelectric polarization has shown great potential to facilitate interfacial charge separation in photoelectrochemical (PEC) water splitting. However, unambiguous evidence of the actual influence of spontaneous ferroelectric polarization, as compared to heterojunction formation, on electron extraction and PEC water splitting is still lacking to date. Herein, core-shell BaTiO3/TiO2 nanostructures are designed as photoanodes based on paraelectric cubic and ferroelectric tetragonal phases BaTiO3 (BTO) perovskite. The cubic and tetragonal crystalline phases are stabilized using selected elaboration methods. Compared to the paraelectric cubic (c-BTO), the ferroelectric tetragonal (t-BTO) leads to a favorable ferroelectric polarization, enhancing directional charge separation and as a consequence to increased photocurrent up to a factor of 1.95. More interestingly, the charge separation efficiency can be tuned by applying positive or negative polarization, with the highest charge separation obtained for the positive one. When loading Ni(OH)2 as a cocatalyst on the t-BTO@TiO2 photoanode, the Ni(OH)2/TiO2/t-BTO exhibits a high performance and superior stability toward PEC water oxidation with a photocurrent almost 6.7 times that of the reference SiO2@TiO2. The proposed facilitation may open an avenue to engineer charge separation and transport for high-performance PEC water oxidation.

Z-Scheme Heterojunction of Hierarchical Cu2S/CdIn2S4 Hollow Cubes to Boost Photoelectrochemical Performance.

The exaltation of light-harvesting efficiency and the inhibition of fast charge recombination are pivotal to the improvement of photoelectrochemical (PEC) performance. Herein, a direct Z-scheme heterojunction is designed of Cu2S/CdIn2S4 by in situ growth of CdIn2S4 nanosheets on the surface of hollow CuS cubes and then annealing at 400 °C. The constructed Z-scheme heterojunction is demonstrated with electron paramagnetic resonance and redox couple (p-nitrophenol/p-aminophenol) measurements. Under illumination, it shows the photocurrent 6 times larger than that of hollow Cu2S cubes, and affords outstanding PEC performance over the known Cu2S and CdIn2S4-based photocatalysts. X-ray photoelectron spectroscopy and density functional theory results demonstrate a strong internal electric field formed in Cu2S/CdIn2S4 Z-scheme heterojunction, which accelerates the Z-scheme charge migration, thereby promoting electron-hole separation and enhancing their utilization efficiency. Moreover, the hollow structure of Cu2S is conducive to shortening the charge transport distance and improving light-harvesting capability. In proof-of-concept PEC application, a PEC detection method for miRNA-141 based on the sensitivity of benzo-4-chloro-hexadienone to light absorption on Cu2S/CdIn2S4 modified electrode is developed with good selectivity and a limit of detection of 32 aM. This work provides a simple approach for designing photoactive materials with highly efficient PEC performance.

Operando double-edge high-resolution X-ray absorption spectroscopy study of BiVO4 photoanodes.

High energy resolution fluorescence detected X-ray absorption spectroscopy is a powerful method for probing the electronic structure of functional materials. The X-ray penetration depth and photon-in/photon-out nature of the method allow operando experiments to be performed, in particular in electrochemical cells. Here, operando high-resolution X-ray absorption measurements of a BiVO4 photoanode are reported, simultaneously probing the local electronic states of both cations. Small but significant variations of the spectral lineshapes induced by the applied potential were observed and an explanation in terms of the occupation of electronic states at or near the band edges is proposed.

Fluorescence and electron transfer of Limnospira indica functionalized biophotoelectrodes.

Cyanobacteria play a crucial role in global carbon and nitrogen cycles through photosynthesis, making them valuable subjects for understanding the factors influencing their light utilization efficiency. Photosynthetic microorganisms offer a promising avenue for sustainable energy conversion in the field of photovoltaics. It was demonstrated before that application of an external electric field to the microbial biofilm or cell improves electron transfer kinetics and, consequently, efficiency of power generation. We have integrated live cyanobacterial cultures into photovoltaic devices by embedding Limnospira indica PCC 8005 cyanobacteria in agar and PEDOT:PSS matrices on the surface of boron-doped diamond electrodes. We have subjected them to varying external polarizations while simultaneously measuring current response and photosynthetic performance. For the latter, we employed Pulse-Amplitude-Modulation (PAM) fluorometry as a non-invasive and real-time monitoring tool. Our study demonstrates an improved light utilization efficiency for L. indica PCC 8005 when immobilized in a conductive matrix, particularly so for low-intensity light. Simultaneously, the impact of electrical polarization as an environmental factor influencing the photosynthetic apparatus diminishes as matrix conductivity increases. This results in only a slight decrease in light utilization efficiency for the illuminated sample compared to the dark-adapted state.

Selective Oxidation of Alcohols to Carbonyls under Decatungstate-Mediated Photoelectrochemical Conditions.

The oxidation of alcohols to the corresponding carbonyl derivatives has been realized under photoelectrochemical conditions in the presence of tetrabutylammonium decatungstate (TBADT) as the homogeneous photocatalyst. The protocol can be applied to both primary and secondary, benzylic and aliphatic alcohols. The desired products are obtained selectively, skipping the need for purposely added chemical oxidants. An in-depth study of photoelectrochemical conditions revealed that the protocol works best under amperostatic conditions in an undivided electrochemical cell irradiated with a 390 nm LED lamp. The comparison with analogous electrochemical and chemical oxidant-promoted photocatalytic oxidations demonstrates the superior efficiency and selectivity of the hereby reported photoelectrochemical conditions.

Copper-surface-mediated synthesis of sp2 carbon-conjugated covalent organic framework photocathodes for photoelectrochemical hydrogen evolution.

Sp2-carbon (sp2-c) covalent organic frameworks (COFs), featuring distinctive π-conjugated network structures, facilitate the migration of photo-generated carriers, rendering them exceptionally appealing for applications in photoelectrochemical water splitting. However, owing to the powdery nature of COFs, leaving anchor the sp2-c COFs powder tightly onto a conductive substrate challenging. Here, we propose a method for preparing photoactive substance-conductive substrate integrated photocathodes through copper surface-mediated knoevenagel polycondensation (Cu-SMKP), this approach results in a uniform and stable sp2-c COF film, directly grown on commercial copper foam (COFTh-Cu). The COFTh-Cu demonstrates a high H2-evolution photocurrent density of 56 µA cm-2 at 0.3 V versus RHE, sustaining stability for 12 hours. The as-prepared COFTh-Cu represents a 4.5-fold increase in current density compared to traditional spin-coating methods and outperforms most COF photocathodes without cocatalysts. This innovative copper surface-mediated approach for preparing photocathodes opens up a crucial pathway towards the realization of highly active COF photocathodes.

Advancing nanoarchitectures of 2D WO3/MXene photoanode for enhanced photoelectrocatalytic oxidation of phenol and arsenic in synthetic wastewater.

The photoelectrocatalytic advanced oxidation process (PEAOP) necessitates high-performing and stable photoanodes for the effective oxidation of complex pollutants in industrial wastewater. This study presents the construction of 2D WO3/MXene heteronanostructures for the development of efficient and stable photoanode. The WO3/MXene heterostructure features well-ordered WO3 photoactive sites anchored on micron-sized MXene sheets, providing an increased visible light active catalytic surface area and enhanced electrocatalytic activities for pollutant oxidation. Phenol, a highly toxic compound, was completely oxidized at an applied potential of 0.8 V vs. RHE under visible light irradiation. Systematic optimization of operational conditions for the photoelectrocatalytic oxidation of phenol was conducted. The phenol oxidation mechanism was elucidated via high-performance liquid chromatography (HPLC) analysis and the identification of intermediate compounds. Additionally, a mixed model of phenol and arsenic (III) in polluted water demonstrated the capability of WO3/MXene photoanode for the simultaneous oxidation of both organic and inorganic pollutants, achieving complete conversion of phenol and As(III) to non-toxic As(V). The WO3/MXene photoanode facilitated water oxidation, generating a substantial amount of O2•- and •OH oxidative species, which are crucial for the concurrent oxidation of phenol and arsenic. Recyclability tests demonstrated a 99% retention of performance, confirming the WO3/MXene photoanode's suitability for long-term operation in PEAOPs. The findings suggest that integrating WO3/MXene photoanodes into water purification systems can enhance economic feasibility, reduce energy consumption, and improve efficiency. This PEAOP offers a viable solution to the critical issue of heavy metal and organic chemical pollution in various water bodies, given its scalability and ability to preserve ecosystems while conserving clean water resources.

Highly efficient photoelectrochemical aptasensor based on CdS/CdTe QDs co-sensitized TiO2 nanoparticles designed for thrombin detection.

A photoelectrochemical (PEC) sensor for the sensitive detection of thrombin (TB) was established. Co-sensitized combination of TiO2 nanoparticles combined with modified cadmium sulfide and cadmium telluride quantum dots (CdS/CdTe QDs) was utilized as a photoactive material. Successful growth of CdS/CdTe quantum dots on mesoporous TiO2 films occured by successive ion-layer adsorption and reaction. This interesting formation of co-sensitive structure is conducive to enhancing the photocurrent response by improving the use rate of light energy. Additionally, the step-level structure of CdS/CdTe QDs and TiO2 NPs shows a wide range of visible light absorption, facilitating the dissociation of excitons into free electrons and holes. Consequently, the photoelectric response of the PEC analysis platform is significantly enhanced. This constructed PEC aptasensor shows good detection of thrombin with a low detection limit (0.033 pM) and a wide linear range (0.0001-100 nM) in diluted actual human serum samples. In addition, this PEC aptasensor also has the characteristics of good stability and good reproducibility, which provides a novel insight for the quantitative measurement of other similar analytes.

A photoelectrochemical aptasensing platform assembled at the heterojunction interface of Cu3BiS3 sensitized CuV2O6 for bisphenol A.

The interaction between the sensitive interfaces of photoelectrochemical (PEC) semiconductor nanomaterials and microscopic matter creates endless potential for the efficient detection of endocrine disruptor. This work presents the development of a high-efficiency PEC aptasensor for bisphenol A (BPA) monitoring based on Cu3BiS3 sensitized CuV2O6 nanocomposites with exceptional visible-light PEC activity. We implemented the integration of Cu3BiS3 nanosheet photosensitizer to sensitize the CuV2O6 nanowire structure that was synthesized utilizing a facile hydrothermal approach. The band gap alignment between Cu3BiS3 and CuV2O6 facilitated enduring PEC response yielding an efficient interfacial structure. The surface of the CuV2O6/Cu3BiS3 electrode was modified with BPA aptamer, enabling specific binding with BPA and precise quantification of its content. The developed aptamer sensors possess a wide detection range of 5.00 × 10-1 to 5.00 × 104 ng/mL, and a low detection limit of 1.60 × 10-1 ng/mL (at S/N = 3). After undergoing 20 testing cycles and enduring long-term storage, the sensor maintained its stability and showcased excellent repeatability and reproducibility. This study presents a promising methodology for the detection of BPA in environmental settings.

Trion Formation Resolves Observed Peak Shifts in the Optical Spectra of Transition-Metal Dichalcogenides.

Monolayer transition-metal dichalcogenides (ML-TMDs) have the potential to unlock novel photonic and chemical technologies if their optoelectronic properties can be understood and controlled. Yet, recent work has offered contradictory explanations for how TMD absorption spectra change with carrier concentration, fluence, and time. Here, we test our hypothesis that the large broadening and shifting of the strong band-edge features observed in optical spectra arise from the formation of negative trions. We do this by fitting an ab initio based, many-body model to our experimental electrochemical data. Our approach provides an excellent, global description of the potential-dependent linear absorption data. We further leverage our model to demonstrate that trion formation explains the nonmonotonic potential dependence of the transient absorption spectra, including through photoinduced derivative line shapes for the trion peak. Our results motivate the continued development of theoretical methods to describe cutting-edge experiments in a physically transparent way.

Molecular Engineering of Perylene Diimide Polymers with a Robust Built-in Electric Field for Enhanced Solar-Driven Water Splitting.

The built-in electric field of the polymer semiconductors could be regulated by the dipole moment of its building blocks, thereby promoting the separation of photogenerated carriers and achieving efficient solar-driven water splitting. Herein, three perylene diimide (PDI) polymers, namely oPDI, mPDI and pPDI, are synthesized with different phenylenediamine linkers. Notably, the energy level structure, light-harvesting efficiency, and photogenerated carrier separation and migration of polymers are regulated by the orientation of PDI unit. Among them, oPDI enables a large dipole moment and robust built-in electric field, resulting in enhanced solar-driven water splitting performance. Under simulated sunlight irradiation, oPDI exhibits the highest photocurrent of 115.1 µA cm-2 for photoelectrochemical oxygen evolution, which is 11.5 times that of mPDI, 26.8 times that of pPDI and 104.6 times that of its counterparts PDI monomer at the same conditions. This work provides a strategy for designing polymers by regulating the orientation of structural units to construct efficient solar energy conversion systems.

HClO-Mediated Photoelectrochemical Epoxidation of Alkenes with Near 100 % Conversion Rate and Selectivity by Regulating Lattice Chlorine Cycle.

Directional organic transformation via a green, sustainable catalytic reaction has attracted a lot of attention. Herein, we report a photoelectrochemical approach for highly selective epoxidation of alkenes in a salt solution using Co2 (OH)3 Cl (CoOCl) as a bridge of photo-generated charge, where the lattice Cl- of CoOCl can be oxidized to generate HClO by the photo-generated holes of BiVO4 photoanode and be spontaneously recovered by Cl- of a salt solution, which then oxidizes the alkenes into the corresponding epoxides. As a result, a series of water-soluble alkenes, including 4-vinylbenzenesulfonic acid sodium, 2-methyl-2-propene-1-sulfonic acid sodium, and 3-methyl-3-buten-1-ol can be epoxidized with near 100 % conversion rate and selectivity. Through further inserting a MoOx protection layer between BiVO4 and CoOCl, the stability of CoOCl-MoOx /BiVO4 can be maintained for at least 120 hours. This work opens an avenue for solar-driven organic epoxidation with a possibility of on-site reaction around the abundant ocean.

Hot or Not? Reassessing Mechanisms of Photocurrent Generation in Plasmon-Enhanced Electrocatalysis.

It is now widely accepted that certain effects arising from localised surface plasmon resonance, such as enhanced electromagnetic fields, hot carriers, and thermal effects, can facilitate electrocatalytic processes. This newly emerging field of research is commonly referred to as plasmon-enhanced electrocatalysis (PEEC) and is attracting increasing interest from the research community, particularly regarding harnessing the high energy of hot carriers. However, this has led to a lack of critical analysis in the literature, where the participation of hot carriers is routinely claimed due to their perceived desirability, while the contribution of other effects is often not sufficiently investigated. As a result, correctly differentiating between the possible mechanisms at play has become a key point of contention. In this review, we specifically focus on the mechanisms behind photocurrents observed in PEEC and critically evaluate the possibility of alternative sources of current enhancement in the reported PEEC systems. Furthermore, we present guidelines for the best experimental practices and methods to distinguish between the various enhancement mechanisms in PEEC.

Fe-N Co-Doped BiVO4 Photoanode with Record Photocurrent for Water Oxidation.

Bismuth vanadate ranks among the most promising photoanodes for photoelectrochemical water splitting. Nonetheless, slow charge separation and transport are key barriers to its photoefficiency. Here, we present a co-doping strategy that significantly improves the charge separation performance of BVO. Under standard one sun illumination, the Fe-N co-doped BVO photoanode (Fe-N-BVO) by N-coordinated Fe precursor reaches a record photocurrent density of 7.01 mA cm-2 at 1.23 V vs RHE after modified a surface co-catalyst. By contrast, much lower photocurrent density is obtained for the N-doped and Fe-doped BVO with separated N and Fe precursors. The detailed characterizations show that the high activity of the Fe-N-BVO is attributed to the enhanced photo-induced bulk charge separation and the accelerated surface water oxidation kinetics. XPS, EXAFS and DFT calculations clearly show that, instead of formation of deep trapping state in the individually doped BVO, the co-doping of Fe-N into BVO generates Fe-based electronic states just below the bottom of conduction band and N-derived states just above the top of valence band. Such modulations in electronic structure enable the efficient trap of the electrons and holes to enhance the separation of photo-induced carriers, but hinder the charge recombination originated from the deep trapping sites.

Coupled Electron- and Ion-Transfer Processes at a Liquid/Liquid Interface Decorated with Photoactive Nanomaterials.

The influence of the ion transfer on photoinduced electron transfer (ET) reactions was studied on the surface of hyperbranched semiconducting BiVO4 particles spontaneously adsorbed at the liquid-liquid (L/L) interface between an aqueous LiCl solution and bis(triphenylphosphoranylidene) ammonium tetrakis(pentaflurophenyl)borate (BATB) in 1,2-dichlorethane. The organic electrolyte was supplemented with [Co(bpy)3](PF6)3 to accept photoexcited electrons from BiVO4 under formation of the corresponding Co(II) complex. The L/L interface was stabilized at the orifice of a micropipette (MP) and allowed to record ion transfer cyclic voltammetry (ITCV) by applying a Galvani potential difference Δ o w ϕ ${{\rm{\Delta }}_o^w \varphi }$ between two reference electrodes in the electrolyte solutions with intermittent illumination by visible light (λ>420 nm). The photogenerated holes caused oxidation of water to O2. Co(II) and O2 were detected at constant Δ o w ϕ ${{\rm{\Delta }}_o^w \varphi }$ at an amperometric microelectrode (ME) facing the orifice of the MP in either the organic or the aqueous electrolyte. The overall current exhibits a photocurrent only in the Δ o w ϕ ${{\rm{\Delta }}_o^w \varphi }$ -range, in which the IT of PF6 - is kinetically limited. The amperometric detection of photogenerated products followed the same pattern as the photocurrent in the total current.