RESUMO
The shortage of freshwater is a global problem, however, the gel that can be used for atmospheric water harvesting (AWH) in recent years studying, suffer from salt leakage, agglomeration, and slow water evaporation efficiency. Herein, a solar-driven atmospheric water harvesting (SAWH) aerogel is prepared by UV polymerization and freeze-drying technique, using poly(N-isopropylacrylamide) (PNIPAm), hydroxypropyl cellulose (HPC), ethanolamine-decorate LiCl (E-LiCl) and polyaniline (PANI) as raw materials. The PNIPAm and HPC formed aerogel networks makes the E-LiCl stably and efficiently loaded, improving the water adsorption-desorption kinetics, and PANI achieves rapid water vapor evaporation. The aerogel has low density ≈0.12-0.15 g cm-3, but can sustain a weight of 1000 times of its own weight. The synergist of elements and structure gives the aerogel has 0.46-2.95 g g-1 water uptake capability at 30-90% relative humidity, and evaporation rate reaches 1.98 kg m-2 h-1 under 1 sun illumination. In outdoor experiments, 88% of the water is harvesting under natural light irradiation, and an average water harvesting rate of 0.80 gwater gsorbent -1 day-1. Therefore, the aerogel can be used in arid and semi-arid areas to collect water for plants and animals.
RESUMO
Smart hydrogels responsive to external stimuli are promising for various applications such as soft robotics and smart devices. High mechanical strength and fast response rate are particularly important for the construction of hydrogel actuators. Herein, tough hydrogels with rapid response rates are synthesized using vinyl-functionalized poly(N-isopropylacrylamide) (PNIPAM) microgels as macro-crosslinkers and N-isopropylacrylamide as monomers. The compression strength of the obtained PNIPAM hydrogels is up to 7.13 MPa. The response rate of the microgel-crosslinked hydrogels is significantly enhanced compared with conventional chemically crosslinked PNIPAM hydrogels. The mechanical strength and response rate of hydrogels can be adjusted by varying the proportion of monomers and crosslinkers. The lower critical solution temperature (LCST) of the PNIPAM hydrogels could be tuned by copolymerizing with ionic monomer sodium methacrylate. Thermo-responsive bilayer hydrogels are fabricated using PINPAM hydrogels with different LCSTs via a layer-by-layer method. The thermo-responsive fast swelling and shrinking properties of the two layers endow the bilayer hydrogel with anisotropic structures and asymmetric response characteristics, allowing the hydrogel to respond rapidly. The bilayer hydrogels are fabricated into clamps to grab small objects and flowers that mimicked the closure of petals, and it shows great application prospects in the field of actuators.
Assuntos
Resinas Acrílicas , Hidrogéis , Temperatura , Hidrogéis/química , Hidrogéis/síntese química , Resinas Acrílicas/química , Microgéis/química , Reagentes de Ligações Cruzadas/química , Acrilamidas/químicaRESUMO
A temperature-responsive surface-enhanced Raman scattering (SERS) substrate with "ON-OFF" switching based on poly(ionic liquid)s (PILs) block copolymer microgels have been designed and synthesized. The PIL units act as a joint component to anchor the gold nanoparticles (AuNPs) and analytes onto poly(N-isopropylacrylamide) (PNIPAm). This anchor allows the analytes to be fixed at the formed hot spots under temperature stimulus. Owing to the regulation of the PNIPAm segment, the SERS substrates exhibit excellent thermally responsive SERS activity with a reversible "ON-OFF" effect. Additionally, because of the anion exchange of PILs, microgels can introduce new analytes, which offers more flexibility for the system. The substrate shows excellent reversibility, controllability, and flexibility of SERS activity, which is expected to have a broad application in the field of practical SERS sensors.
Assuntos
Resinas Acrílicas , Ouro , Líquidos Iônicos , Nanopartículas Metálicas , Microgéis , Análise Espectral Raman , Temperatura , Líquidos Iônicos/química , Ouro/química , Nanopartículas Metálicas/química , Resinas Acrílicas/química , Microgéis/química , Propriedades de Superfície , Polímeros/química , Tamanho da PartículaRESUMO
The development of temperature-sensitive sensors upgraded by poly(N-isopropylacrylamide) (PNIPAM) represents a significant stride in enhancing performance and tailoring thermoresponsiveness. In this study, an array of temperature-responsive electrochemical sensors modified with different PNIPAM-based copolymer films were fabricated via a "coating and grafting" two-step film-forming technique on screen-printed platinum electrodes (SPPEs). Chemical composition, grafting density, equilibrium swelling, surface wettability, surface morphology, amperometric response, cyclic voltammograms, and other properties were evaluated for the modified SPPEs, successively. The modified SPPEs exhibited significant changes in their properties depending on the preparation concentrations, but all the resulting sensors showed excellent stability and repeatability. The modified sensors demonstrated favorable sensitivity to hydrogen peroxide and L-ascorbic acid. Furthermore, notable temperature-induced variations in electrical signals were observed as the electrodes were subjected to temperature fluctuations above and below the lower critical solution temperature (LCST). The ability to reversibly respond to temperature variations, coupled with the tunability of PNIPAM's thermoresponsive properties, opens up new possibilities for the design of sensors that can adapt to changing environments and optimize their performance accordingly.
RESUMO
Despite many efforts devoted toward the design of covalent organic frameworks (COFs) at the framework level by selecting the building blocks, their organization in the nano to meso regimes is often neglected. Moreover, the importance of processability for their applications has recently emerged and the synthesis of COF nanostructures without agglomeration is still a challenge. Herein, the first example of hybrid COF-polymer particles for which polymers are used to manipulate the 2D COF growth along a specific direction is reported. The study examines how the nature, chain-end functionality, and molar mass of the polymer influence the shaping of hybrid 2D boronate ester-linked COF-polymer particles. Catechol-poly(N-butyl acrylate) leads to the self-assembly of crystallites into quasi-spherical structures while catechol-poly(N-isopropylacrylamide) mediates the synthesis of raspberry-like COF-polymer particles with radial grain orientation. Scanning and transmission electron microscopies (SEM and TEM) and 4D-STEM-ACOM (automated crystal orientation mapping) highlight the single-crystal character of these domains with one plane family throughout the particles. Interestingly, the presence of PNIPAm on the particle surface allows their drying without co-crystallization and enables their resuspension. Kinetic investigations show that catechol-PnBuA acts as a modulator and catechol-PNIPAm induces a template effect, introducing supramolecular self-assembly properties into particles to create new morphologies with higher structural complexity, beyond the framework level.
RESUMO
Over the past few decades, stimuli-responsive materials have been widely applied to porous surfaces. Permeability and conductivity control of ions confined in nanochannels modified with stimuli-responsive materials, however, have been less investigated. In this work, the permeability and conductivity control of ions confined in nanochannels of anodic aluminum oxide (AAO) templates modified with thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) brushes are demonstrated. By surface-initiated atom transfer radical polymerization (SI-ATRP), PNIPAM brushes are successfully grafted onto the hexagonally packed cylindrical nanopores of AAO templates. The surface hydrophilicities of the membranes can be reversibly altered because of the lower critical solution temperature (LCST) behavior of the PNIPAM polymer brushes. From electrochemical impedance spectroscopy (EIS) analysis, the temperature-gating behaviors of the AAO-g-PNIPAM membranes exhibit larger impedance changes than those of the pure AAO membranes at higher temperatures because of the aggregation of the grafted PNIPAM chains. The reversible surface properties caused by the extended and collapsed states of the polymer chains are also demonstrated by dye release tests. The smart thermo-gated and ion-controlled nanoporous membranes are suitable for future smart membrane applications.
RESUMO
Phase transition behaviors of poly(N-isopropylacrylamide) nanogels with different compositions induced by (-)-epigallocatechin-3-gallate (EGCG) and ethyl gallate (EG) has been investigated systematically. Monodisperse poly(N-isopropylacrylamide-co-N-hydroxymethyl acrylamide) (P(NIPAM-co-NMAM)) and poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) (P(NIPAM-co-HEMA)) nanogels with different feeding monomer ratios were prepared by emulsion polymerization. P(NIPAM-co-NMAM) nanogels exhibit rapid isothermal phase transition behavior in EGCG solutions with low concentration (10-3 mol/L) in less than 10 minutes. The thermosensitive phase transition behaviors of nanogels are affected not only by the copolymerized monomers but also by the concentrations of EGCG and EG in aqueous solutions. Nanogels remain in a shrunken state and do not exhibit thermosensitive phase transition behaviors in EGCG solutions (≥5 mmol/L), whereas they display thermo-responsive phase transition behaviors in EG solutions. The volume phase transition temperature (VPTT) shifts to lower temperatures with increasing EG concentration. The diameters of P(NIPAM-co-NMAM) nanogels decrease with increasing EG concentration at temperatures between 29 and 33 °C. In contrast, the diameters of P(NIPAM-co-HEMA) nanogels increase with increasing EGCG concentration at temperatures between 37 and 45 °C. The results demonstrate the potential of nanogels for simple detection of EG and EGCG concentrations in aqueous solutions over a wide temperature range, and EGCG can serve as a signal for the burst-release of drugs from the P(NIPAM-co-NMAM)-based carriers at physiological temperature.
RESUMO
Lanthanide-based upconverting nanoparticles (UCNPs) are trustworthy workhorses in luminescent nanothermometry. The use of UCNPs-based nanothermometers has enabled the determination of the thermal properties of cell membranes and monitoring of in vivo thermal therapies in real time. However, UCNPs boast low thermal sensitivity and brightness, which, along with the difficulty in controlling individual UCNP remotely, make them less than ideal nanothermometers at the single-particle level. In this work, it is shown how these problems can be elegantly solved using a thermoresponsive polymeric coating. Upon decorating the surface of NaYF4 :Er3+ ,Yb3+ UCNPs with poly(N-isopropylacrylamide) (PNIPAM), a >10-fold enhancement in optical forces is observed, allowing stable trapping and manipulation of a single UCNP in the physiological temperature range (20-45 °C). This optical force improvement is accompanied by a significant enhancement of the thermal sensitivity- a maximum value of 8% °C+1 at 32 °C induced by the collapse of PNIPAM. Numerical simulations reveal that the enhancement in thermal sensitivity mainly stems from the high-refractive-index polymeric coating that behaves as a nanolens of high numerical aperture. The results in this work demonstrate how UCNP nanothermometers can be further improved by an adequate surface decoration and open a new avenue toward highly sensitive single-particle nanothermometry.
Assuntos
Elementos da Série dos Lantanídeos , Nanopartículas , Luminescência , PolímerosRESUMO
The construction of porous nanocarriers with good lubricating performance and stimuli-responsive drug release is significant for the synergetic therapy of osteoarthritis (OA). Although metal-organic framework nanoparticles (nanoMOFs) as carriers can support drug delivery, achieving the synergy of aqueous lubrication and stimuli-responsive drug release is challenging. In this work, a core-shell nanoMOFs@poly(N-isopropylacrylamide) (PNIPAm) microgel hybrid via one-pot soap-free emulsion polymerization is developed. Programmable growth of the PNIPAm microgel layer on the surface of nanoMOFs is achieved by tuning the concentration of the monomer and the crosslinker in the reaction. Reversible swelling-collapsing behaviors of the hybrid are realized by tuning the temperature below and above the lower critical solution temperature. When used as water lubrication additives, the hybrid enables reductions in both the coefficient of friction and wear volume. In vitro thermal-responsive drug release is demonstrated on the diclofenac sodium-loaded hybrid by controlling the swelling and collapsing states of the PNIPAm nanolayer. Moreover, the good biocompatibility of the hybrid is verified by culturing toward HeLa and BEAS-2B cells. These results establish a nanoMOFs@microgel hybrid that can achieve friction and wear reduction and thermal-responsive drug release.
Assuntos
Microgéis , Nanopartículas , Liberação Controlada de Fármacos , Lubrificação , ÁguaRESUMO
This work demonstrates thermally programmable dynamic capillarity in exclusively engineered nanochannels functionalized by grafted smart elastomeric layers onto their inner surfaces. Tunable control of the capillarity is observed over the temperature window of 25-31 °C, deciphering the possibility of a sevenfold alteration in the rate of capillary flow. A simple theory explains the confluence of viscous and capillary interactions as mediated by the non-trivial interplay of the substrate wettability, confinement-induced surface layering of molecules, and thermally activated modulation of surface tension, to bring out this intriguing effect. The technology is demonstrated to be completely reconfigurable over the intended spatial and temporal regimes, via selective grafting of the channel surface and preferential choice of the activation temperature. Such favorable features as opposed to more complex yet non-reconfigurable flow manipulation strategies previously reported are likely to open up new possibilities of highly precise controlled nanofluidic manipulation of temperature-sensitive biological samples and chemical species on-demand, for applications ranging from biomedical technologies to energy harvesting and water purification.
RESUMO
Regulating catalytic activity plays an important role in further optimizing and developing multifunctional catalysts with high selectivity and high activity. Reversible dual regulation of catalytic activity has always been a challenging task. Here, we prepared poly(N-isopropylacrylamide)-anchored gold nanoparticles (AuNP@CDs-Azo-PNIPAM) through host-guest interaction of cyclodextrin capped gold nanoparticles (AuNP@CDs) and azobenzene-terminated poly(N-isopropylacrylamide) (Azo-PNIPAM). Azo-PNIPAM as thermal and light responsive ligand allows reversible dual regulation of catalytic activity. When the temperature is higher than the lowest critical solution temperature, the PNIPAM chain shrinks rapidly, increasing the steric hindrance around AuNPs and reducing the catalytic activity. Under ultraviolet light irradiation,cis-azobenzene disassembles from cyclodextrin and the number of surface active sites of AuNPs increases, which improves the catalytic activity. The reaction rate of UV irradiation is almost 1.3 times that of visible light irradiation. This work provides a simple and effective strategy for the construction of reversible catalysts.
RESUMO
Although photothermal therapy (PTT) can effectively eliminate tumors, the normal tissues near tumors are inevitably damaged by heat and infected by bacteria, which greatly limits the therapeutic effect. In this work, an injectable thermosensitive hydrogel based on iodine-loaded starch-g-poly(N-isopropylacrylamide) (PNSI) is developed to overcome this problem. FTIR, 1 H NMR, and UV-vis spectra confirm the graft copolymerization of poly(N-isopropylacrylamide) with starch and the formation of "iodine-starch" complex. Transmission electron microscope images show PNSI polymer self-assembles into regular spherical nanogel with a size of ≈50 nm. The concentrated nanogel dispersion is a sol at room temperature and transforms to hydrogel at body temperature. Under NIR laser irradiation for 10 min, the ΔT of the nanogel dispersion approachs about 20 °C with excellent thermal stability and high cytotoxicity due to the photothermal effect of the "iodine-starch" complex. After intratumor injection, this injectable hydrogel efficiently inhibites the tumor growth under 808 nm laser irradiation. Furthermore, it can also suppress Staphylococcus aureus infection in the wound post-PTT due to the release of iodine, which promotes wound healing. Therefore, this injectable thermosensitive "iodine-starch" composite hydrogel with advantages of good biocompatible and easy preparation possesses potential application for tumor photothermal therapy and antibacterial infection.
Assuntos
Iodo , Neoplasias , Acrilamidas , Resinas Acrílicas , Antibacterianos/farmacologia , Humanos , Hidrogéis/química , Hidrogéis/farmacologia , Iodo/farmacologia , Nanogéis , Neoplasias/terapia , Terapia Fototérmica , Polietilenoglicóis , Polietilenoimina , Polímeros , Amido , TemperaturaRESUMO
The locomotor behavior of creatures in nature can bring a lot of inspiration for the fabrication of soft actuators. In this paper, we fabricated a bionic light-driven swimming soft robot that can perform grasping of tiny objects and achieve the task of object transfer. By adding carbon nanotubes (CNTs), the temperature-sensitive hydrogels can be endowed with light-responsive properties. The fabricated composite hydrogel structure can control the contraction and expansion of volume by light, which is similar to the contraction and diastole behavior of muscles. The oscillation of the fish tail and the grasping action of the normally closed micromanipulator can be achieved by the control of the irradiation of the xenon light source. The bending of the bionic arm can be controlled by the irradiation of a near-infrared (NIR) laser, which transforms the spatial position and posture of the micromanipulator. The proposed scheme is feasible for miniaturized fabrication and application of flexible actuators. This work provides some important insights for the study of light-driven microrobots and light-driven flexible actuators.
Assuntos
Nanotubos de Carbono , Robótica , Hidrogéis/química , Natação , TemperaturaRESUMO
In this study, temperature-responsive polymer-protein conjugate was synthesized using a "grafting from" concept by introducing a chain transfer agent (CTA) into bovine serum albumin (BSA). The BSA-CTA was used as a starting point for poly(N-isopropylacrylamide) (PNIPAAm) through reversible addition-fragmentation chain transfer polymerization. The research investigations suggest that the thermally responsive behavior of PNIPAAm was controlled by the monomer ratio to CTA, as well as the amount of CTA introduced to BSA. The study further synthesized the human serum albumin (HSA)-PNIPAAm conjugate, taking the advantage that HSA can specifically adsorb indoxyl sulfate (IS) as a uremic toxin. The HSA-PNIPAAm conjugate could capture IS and decreased the concentration by about 40% by thermal precipitation. It was also revealed that the protein activity was not impaired by the conjugation with PNIPAAm. The proposed strategy is promising in not only removal of uremic toxins but also enrichment of biomarkers for early diagnostic applications.
Assuntos
Resinas Acrílicas/química , Soroalbumina Bovina/química , Albumina Sérica Humana/química , Toxinas Urêmicas/isolamento & purificação , Resinas Acrílicas/síntese química , Adsorção , Animais , Bovinos , Humanos , Indicã/isolamento & purificação , Soroalbumina Bovina/síntese química , Albumina Sérica Humana/síntese química , TemperaturaRESUMO
In this research, we studied, in detail, the behavior of common PNIPAM microgels, obtained through surfactant-free precipitation polymerization, in a number of organic solvents. We showed that many of the selected solvents serve as good solvents for the PNIPAM microgels and that the size and architecture of the microgels depend on the solvent chosen. Expanding the range of solvents used for PNIPAM microgel incubation greatly enhances the possible routes for microparticle functionalization and modification, as well as the encapsulation of water-insoluble species. In this demonstration, we successfully encapsulated water-insoluble Sudan III dye in PNIPAM microgels and prepared the aqueous dispersions of such composite-colored microparticles.
Assuntos
Microgéis , Géis , Temperatura , Polimerização , Água , SolventesRESUMO
The treatment of diabetes lies in developing novel functional carriers, which are expected to have the unique capability of monitoring blood glucose levels continuously and dispensing insulin correctly and timely. Hence, this study is proposing to create a smart self-regulated insulin delivery system according to changes in glucose concentration. Temperature and glucose dual responsive copolymer microcapsules bearing N-isopropylacrylamide and 3-acrylamidophenylboronic acid as main components were developed by bottom-spray coating technology and template method. The insulinoma ß-TC6 cells were trapped in the copolymer microcapsules by use of temperature sensitivity, and then growth, proliferation, and glucose-responsive insulin secretion of microencapsulated cells were successively monitored. The copolymer microcapsules showed favorable structural stability and good biocompatibility against ß-TC6 cells. Compared with free cells, the biomicrocapsules presented a more effective and safer glucose-dependent insulin release behavior. The bioactivity of secreted and released insulin did not differ between free and encapsulated ß-TC6 cells. The results demonstrated that the copolymer microcapsules had a positive effect on real-time sensing of glucose and precise controlled release of insulin. The intelligent drug delivery system is supposed to mimic insulin secretion in a physiological manner, and further provide new perspectives and technical support for the development of artificial pancreas.
Assuntos
InsulinaRESUMO
A series of poly(N-isopropylacrylamide) (PNIPAm) homopolymers with narrow molecular weight distributions (MWDs) is prepared via photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. The thermal transition temperature of these polymer samples is analyzed via turbidity measurements in water/N,N'-dimethylformamide mixtures, which show that the cloud point temperatures are inversely proportional to the weight average molecular weight (Mw ). Binary mixtures of the narrowly distributed PNIPAm samples are also prepared and the statistical parameters for the MWDs of these blends are determined. Very interestingly, for binary blends of the PNIPAm samples, the thermoresponsive transition is not only dependent on the Mw , which has been shown previously, but also on higher order statistical parameters of the MWDs. Specifically, at very high values of skewness and kurtosis, the polymer blends deviate from a single sharp thermoresponsive transition toward a broader thermal response, and eventually to a regime of two more distinct transitions. This work highlights the importance of in-depth characterization of polymer MWDs for thermoresponsive polymers.
Assuntos
Resinas Acrílicas , Polímeros , Peso Molecular , Polimerização , TemperaturaRESUMO
Poly(N-isopropylacrylamide) (PNIPAM) is an important thermo-responsive polymer that finds applications in many areas. However, the preparation of PNIPAM-based block copolymer nanoparticles with higher-order morphologies at high solids is challenging. Herein, aqueous photoinitiated polymerization-induced self-assembly (photo-PISA) of N-isopropylacrylamide (NIPAM) using an asymmetrical cross-linker is developed for one-step preparation of PNIPAM-based block copolymer nanoparticles with various morphologies (spheres, worms, and vesicles). It is demonstrated that reaction temperature has a great effect on both polymerization kinetics and morphologies of block copolymer nanoparticles. Reversible addition-fragmentation chain transfer (RAFT) reactive groups embedded inside the PNIPAM core provide a landscape for further functionalization. PNIPAM-based block copolymer nanoparticles with different surface properties are prepared by seeded photo-PISA at room temperature. Finally, these block copolymer nanoparticles are also used as additives to tune mechanical properties of hydrogels via covalent cross-linking.
Assuntos
Metacrilatos , Nanopartículas , Acrilamidas , Resinas Acrílicas , Polimerização , PolímerosRESUMO
A variety of poly(N-isopropylacrylamide) (PIPAAm)-grafted surfaces have been reported for temperature-controlled cell adhesion/detachment. However, the surfaces reported to date need further improvement to achieve good outcomes for both cell adhesion and detachment, which are inherently contradictory behaviors. This study investigated the effects of terminal cationization and length of grafted PIPAAm chains on temperature-dependent cell behavior. PIPAAm brushes with three chain lengths were constructed on glass coverslips via surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization. Terminal substitution of the grafted PIPAAm chains with either monocationic trimethylammonium or nonionic isopropyl moieties was performed through the reduction of terminal RAFT-related groups and subsequent thiol-ene reaction with the corresponding acrylamide derivatives. Although the thermoresponsive properties of the PIPAAm brush surfaces were scarcely affected by the terminal functional moiety, the zeta potentials of the cationized PIPAAm surfaces were higher than those of the nonionized ones, both below and above the phase transition temperature of PIPAAm (30°C). When bovine endothelial cells were cultured on each surface at 37°C, the number of adherent cells decreased with longer PIPAAm. Notably, cell adhesion on the cationized PIPAAm surfaces was higher than that on the nonionized surfaces. This terminal effect on cell adhesion gradually weakened with increasing PIPAAm length. In particular, long-chain PIPAAm brushes virtually showed cell repellency even at 37°C, regardless of the termini. Interestingly, moderately long-chain PIPAAm brushes promoted cell detachment at 20°C, with negligible terminal electrostatic interruption. Consequently, both cell adhesion and detachment were successfully improved by choosing an appropriate PIPAAm length with terminal cationization.
RESUMO
The characteristics of cultured cell attachment onto poly-L-lysine (PLL), collagen, and the thermoresponsive polymer poly(N-isopropylacrylamide) (PNIPAM) were studied using a quartz crystal microbalance (QCM). A QCM with microscope cameras enclosed in a Peltier chamber was developed to enable QCM measurements and microphotographic imaging to be conducted in a temperature-controlled CO2 incubator. Human hepatoma cell line HepG2 cells were cultured on the quartz crystals coated with PLL, collagen, and PNIPAM. Response curves of the resonant frequency of the quartz crystals during the cell attachment process were analyzed on the basis of the parameters of modeling curves fit to the experimentally obtained curves. Analysis of the fitting curves showed that the time constants of the first-lag response were 11 h for PLL, 16 h for collagen, and 38 h for PNIPAM and that the frequency change for the PNIPAM films was six times smaller than those for the PLL and collagen films. These findings were supported by photographic images showing wider cell spread on PLL and collagen than on PNIPAM. The response of cells on PNIPAM was measured during a thermal cycle from 37 to 20 °C to 37 °C. In the resonance frequency-resonance resistance (F-R) diagram, the slopes of ΔR/ΔF corresponding to the cell attachment process and those corresponding to the thermal cycling process differed; the positions in the F-R diagram also shifted to higher resonant frequencies after the thermal cycle. These results suggested that the mass effect decreased as a result of the weakening of the cell attachment strength by the thermal cycle because the molecular brushes of PNIPAM were disarranged.