Resin infiltration versus fluoride varnish for visual improvement of white spot lesions during multibracket treatment. A randomized-controlled clinical trial.

AIMS: This study aimed to evaluate the visual improvement of resin infiltration of white spot lesions (WSL) during orthodontic treatment with the multibracket appliance (MBA) compared to fluoride varnish. METHODS: Patients aged 12-17 years with at least one WSL with an International Caries Detection and Assessment System (ICDAS) score of 1-2 during an active MBA treatment were included and randomized to receive either resin infiltration (Icon) or fluoride application (Flairesse). Standardized digital images were obtained before, one-day, one-week, one-month, three-months and six-months after treatment using a DSLR camera and a matching polarization filter. A grey reference card was used for color standardization. A Matlab routine was used to measure the color difference between adjacent healthy enamel and treated WSL. The independent-samples t-test was used for intergroup and paired-samples t-test for intragroup comparison. RESULTS: Images of 116 teeth from 36 patients were analyzed. The ΔE for the "Icon" treated WSL was smaller (T1ICON = 5.0 ± 1.4) than in the fluoride group (T1Fluoride = 8.4 ± 3.2). Caries infiltration significantly improved the aesthetic appearance of WSL (p < 0.001), which remained satisfactory at six months (T5ICON = 5.2 ± 1.6). CONCLUSION: WSL infiltration management during orthodontic treatment was superior to topical fluoridation in not only arresting the enamel lesions but also significantly improving the aesthetic appearance of demineralized regions around the brackets. CLINICAL RELEVANCE: WSL treatment in orthodontic patients is usually initiated after debonding. Research has shown that the earlier WSL is treated, the better the aesthetic outcome. There is limited data on the efficacy of resin infiltration of WSL during orthodontic treatment.

Effect of the use of remineralization agents before resin infiltration on the treatment of initial enamel lesions: an in-vitro study.

AIM: This study aimed to evaluate the effect of the use of remineralization agents before the application of resin infiltration on the treatment of initial enamel lesions. MATERIALS AND METHODS: Eighty buccal enamel samples were prepared from human molars, and artificial initial lesions were formed after 96 h of incubation with a demineralizing solution. The samples were randomly divided into 8 groups (n = 10) including a remineralizing agent (Tooth Mousse, Medical Mineral Gel, Remin Pro), resin infiltration (ICON), and a combined treatment of both. Remineralizing agents were applied in pH cycle for 7 days. Baseline, demineralization, and after-treatment fluorescence (FluoreCam and DIAGNOdent Pen), surface microhardness (HMV-2T), surface roughness (M300C), OCT (Maestro-2) and ultrasonic system (Novascope 4500) data were obtained for all groups. The sample surfaces were examined under SEM/EDX (SU3500) at x1000. Data were statistically analyzed using the Two-Way Robust ANOVA and Bonferroni tests (p < 0.05). RESULTS: There was no statistically significant difference between the groups for microhardness, roughness, OCT, DIAGNOdent Pen, ultrasound, and FluoreCam size/intensity values (p = 0.582; p = 0.963; p = 0.884; p = 0.923; p = 0.051; p = 0.268; p = 0.793 respectively). The effect of the treatment procedure showed a significant difference (p < 0.001), except for the roughness values (p = 0.984). The lowest Calcium (Ca) ratio (%atomic) was observed in the RI group in the EDX analysis. CONCLUSION: Remineralizing agents and resin infiltration methods may be used in combination or alone in the treatment of initial enamel lesions. Combining remineralizing agents with resin infiltration does not alter the efficacy of the treatment.

The color stability of artificial white spot lesions treated with resin infiltration after exposure to staining beverages.

BACKGROUND: To evaluate the effect of staining beverages on the color-changing of resin-infiltrated artificial white spot lesions (WSLs). METHODS: Thirty-five artificial WSLs were created by pH cycling on flat bovine teeth specimens. The WSLs were treated with resin infiltration and were divided into five groups based on staining beverages: artificial saliva, coffee, wine, green tea, and Coca-Cola. These specimens were subjected to a 28-day exposure to the respective beverages. Color stability was assessed using a spectrophotometer at different time points: baseline, after 7, 14, 21, and 28 days of exposure, and repolishing. The color difference (∆E) between each time point and the baseline was calculated. Statistical analysis was performed using two-way measures ANOVA with a significance level of p = 0.05. RESULTS: All resin-infiltrated specimens exposed to staining beverages for 7 days exhibited more significant color changes than those exposed to artificial saliva. The color change patterns varied based on the type of beverage. The color alterations intensified with extended immersion in the wine and Coca-Cola groups, while there were no significant differences in the color of specimens after 28 days of immersion in the coffee and green tea groups. However, after cleaning with pumice powder, all specimens showed significantly reduced color changes compared to those observed after 28 days of immersion, except those immersed in coffee. CONCLUSIONS: Exposure of resin-infiltrated bovine tooth specimens to staining beverages resulted in a significant color alteration as the immersion time increased. However, the staining effect could be minimized by cleaning with pumice powder, except for the coffee group. CLINICAL RELEVANCE: After resin infiltration treatment, patients should be advised to minimize the consumption of colored beverages to prevent staining that could impact esthetic appearance.

Aesthetic impact of resin infiltration and its mechanical effect on ceramic bonding for white spot lesions.

BACKGROUND: Treating white spot lesions (WSLs) with resin infiltration alone may not be sufficient, raising questions about its compatibility with other treatments amid controversial or incomplete data. Therefore, this study aimed to assess the aesthetic feasibility of resin infiltration combined with bleaching, as well as its potential mechanical effect on ceramic bonding to WSLs. METHODS: One hundred and fifty flat enamel surfaces of bovine incisors were prepared. Ninety specimens were deminerailized and randomly assigned to three groups(n = 30): post-bleaching resin infiltration (Bl-R), pre-bleaching resin infiltration (R-Bl), and only resin infiltration (R). Color, surface roughness and microhardness were assessed in immediate, thermocycling and pigmentation tests. The remaining sixty samples were randomly assigned to three groups (n = 20): control (Ctrl), bonding (Bo), pre-bonding resin infiltration (R-Bo). Shear bonding strength, failure mode, micro-leakage depth and interface morphology were evaluated after ceramic bonding. The Tukey test and analysis of variance (ANOVA) were used for statistical analysis. RESULTS: For the effect of resin infiltration and bleaching on WSLs, the R-Bl group showed the worst chromic masking ability, with the highest |ΔL|, |Δa|, |Δb|, and ΔE values after treatment. Compared with those in the Bl-R group, the R-Bl and R groups showed significant time-dependent staining, which is possibly attributed to their surface roughness. For the effect of resin infiltration on the adhesive properties of WSLs, resin infiltration reduced the staining penetration depth of WSLs from 2393.54 ± 1118.86 µm to 188.46 ± 89.96 µm (P < 0.05) while reducing WSLs porosity in SEM observation. CONCLUSIONS: Post-bleaching resin infiltration proved to be advantageous in the aesthetic treatment of WSLs. Resin infiltration did not compromise bonding strength but it did reduce microleakage and enhance marginal sealing. Overall, resin infiltration can effectively enhance the chromatic results of treated WSLs and prevent long-term bonding failure between ceramics and enamel. Based on these findings, the use of post-bleaching resin infiltration is recommended, and resin infiltration before ceramic bonding is deemed viable in clinical practice.

Resin infiltration for white spot lesions: An in vitro experimental trial.

OBJECTIVE: To evaluate the aesthetic outcome by varying the duration allowed for infiltrant penetration when treating white spot lesions with resin infiltration. DESIGN: An in vitro, experimental randomised study. METHODS: Artificially created white spot lesions (WSLs) were induced on 100 extracted anterior teeth (T1). Teeth were divided into enamel and dentine groups depending on the extent of the lesion and then randomly assigned into different treatment protocol groups: penetration times of 3, 6 and 9 min. Resin infiltration treatment was applied according to the treatment protocol assigned (T2). Samples were thermocycled for 10,000 cycles (1 clinical year) (T3). The samples from the 3-min enamel and dentine groups were then randomly assigned into either a repeat treatment or no additional treatment group (T4). Samples were then thermocycled for an additional 10,000 cycles (T5). Spectrophotometric analysis was measured colour change (ΔE) for all groups. RESULTS: Mean ΔE values equal to or greater than the critical value (3.7) indicate a detectable clinical difference in colour of the treated WSL when compared to before WSL formation. Mean ΔE values, for the enamel groups, were slightly above or significantly below the critical value, and for the dentine groups, were significantly above the critical value. Mean ΔE values within the enamel and dentine groups both demonstrated a downward trend with increasing time allowed for resin infiltrant penetration (P < 0.05). No significant mean ΔE difference (P = 0.53) was found between groups that received a single or repeat treatment. After the first thermocycling event, no significant difference in colour change was observed in all groups except for the deep dentine lesion treated for 3 min. There was a significant difference in colour change for all groups except the enamel group that received a single treatment following thermocycling after a single or repeat treatment. CONCLUSION: Increasing the resin infiltrant penetration time to at least 9 min is advised as the most optimised treatment protocol. Resin infiltration treatment should be done only once to treat a particular white spot lesion as subsequent treatment for the same lesion results in marginal colour improvement. The colour improvement of WSLs resulting from the resin infiltration treatment can be expected to last for at least 1 year. Resin infiltration treatment of shallow lesions with a single and optimised infiltration technique can be expected to last an additional year.

Visualization of etching cycles efficacy at the resin infiltration into artificial enamel caries: in-vitro study on bovine teeth.

This study evaluated the effect of repeated etching cycles on resin infiltrant penetration. Enamel samples measuring 4 × 4 × 3 mm3 were obtained from the facial aspect of 50 extracted bovine teeth. Samples were immersed in a demineralization solution for 21 days to create artificial lesions and divided into five equal groups (n = 10). A 15% hydrochloric acid gel was administered to each group. The acid etching application time differed between groups: Group 1; 2 min, Group 2; 2 × 2 min, Group 3; 3 × 2 min, Group 4; 4 × 2 min, and Group 5; 5 × 2 min. Resin infiltration was visualized using a confocal laser scanning microscopy. The lesion, penetration and erosion depth (µm) were calculated, and data were statistically analyzed. The highest penetration depth (75.59 ± 9.42 µm) was seen in Group 5, followed by Groups 4, 3, 2 and 1. However, there were no statistically significant differences in the penetration depths between Groups 4 and 5 and between Groups 2, 3 and 4 (p > 0.05). In conclusion, a repeated etching cycle enhanced resin infiltrant penetration.

Comparative evaluation of four treatments for postorthodontic white spot lesions: a randomized controlled trial.

OBJECTIVES: To evaluate the treatment efficacy of fluoride toothpaste alone and those of adjunctive use of resin infiltration, sodium fluoride varnish, and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) on white spot lesions (WSLs). MATERIALS AND METHODS: Seventy-nine patients (356 teeth) with WSLs after orthodontic treatment were randomly allocated into four groups. The WSLs of the participants received resin infiltration only at baseline, and the other groups received fluoride varnish, CPP-ACP mousse, and placebo treatment every 6 months, respectively. A toothpaste containing 1400 ppm fluoride and toothbrushes were distributed to all participants, and oral hygiene instructions were provided. Photos of the teeth with WSL were taken to compare the change between groups which was measured by ImageJ software. RESULTS: Twelve months later, different degrees of reduction in the area of WSLs were observed in all groups. The percentage of lesion area reduction in WSLs in the resin infiltration group was 46.6%, which was significantly higher than that in fluoride varnish group (26.6%), CPP-ACP group (28.6%), and control group (29.8%), and the differences were statistically significant (p < 0.001). CONCLUSIONS: This study shows that after 1-year follow-up, the use of fluoride toothpaste, with or without the use of fluoride varnish or CPP-ACP, can reduce the area of WSLs. While resin infiltration can immediately improve dental aesthetics and continuously improved in 12 months, resin infiltration group showed much better results than other groups. TRIAL REGISTRATION: Clinical Trials Registration Number: ChiCTR2000032516. CLINICAL SIGNIFICANCE: The use of fluoride toothpaste, with or without adjunctive use of fluoride varnish and CPP-ACP, can reduce the area of WSLs, while resin infiltration treatment has additional effect and can immediately improve dental aesthetics.

Clinical evaluation of resin infiltration treatment masking effect on hypomineralised enamel surfaces.

BACKGROUND: Resin infiltration is a micro-invasive treatment for molar incisor hypomineralisation (MIH). In this study it was aimed to evaluate the masking effect of resin infiltration treatment (ICON) on hypomineralised enamel surface of permanent anterior teeth by using laser fluorescence, spectrophotometer, and cross-polarisation photography. METHODS: A total of 116 permanent central incisors in 37 patients were included in the study. The resin infiltration treatment (Icon®) was applied to the teeth with MIH; the healthy teeth received no treatment (control). Hypomineralised enamel lesions were evaluated by ICDAS II criteria. DIAGNOdent Pen was used to assess the lesions and healthy enamel surface quantitatively. Colour changes in enamel lesions were evaluated by using a spectrophotometer (VITA EasyShare). Each enamel lesion was imaged using a cross-polarization technique before and after treatment. All photos were assessed using Image J to evaluate the changes in lesion size. Enamel lesions were evaluated before; immediately after; 1; 3; and 6 months after treatment. Statistical significance was set as p < 0.05. RESULTS: After the resin infiltration, significant decreases were found in the mean DIAGNOdent values for the treatment group (p < 0.05). The colour differences before and after treatment significantly differed in all follow-ups (p < 0.05). In the treatment group, lesion areas decreased significantly after treatment (p < 0.05). CONCLUSIONS: The resin infiltration treatment has a masking effect on MIH lesions without cavities, with stable outcomes after six months. The cross-polarization photography technique may be use to evaluate the lesion size instead of photography with flash. TRIAL REGISTRATION: NCT04685889 (registered 28 December 2020).

Comparison of therapies of white spot lesions: a systematic review and network meta-analysis.

OBJECTIVE: White spot lesions (WSLs), the earliest evidence of enamel demineralization, are considered amenable to intervention to achieve a remineralized or arrested state of caries. The management of WSLs is quite challenging, and there is no definitive cure as yet. We performed a network meta-analysis to assess the efficacy of seven therapies for WSLs and gave a hierarchy of them. MATERIALS AND METHODS: We systematically searched the PubMed, EMBASE, Cochrane, and Web of Science databases (last search: July 2022) to identify all relevant studies. We limited our search to studies published in English. Randomized controlled designed in vitro/clinical trials related to the efficacy of the seven therapies for WSLs were included. Data extraction was performed independently by two reviewers. The risk of bias (ROB) 2.0 tool from Cochrane and a previous in vitro methodological tool will be used for the quality assessment. Variations in quantitative light-induced fluorescence (QLF), laser fluorescence (LF), and lesions area were the primary outcome measures. Standard mean difference (SMD) was used as the effect size for the Network meta-analysis (NMA). Consistency and inconsistency tests were conducted. The hierarchy of 7 treatment effects was evaluated using surface probabilities under cumulative ranking (SUCRA). Publication bias was evaluated using a bias plot. RESULTS: Forty-two articles were included in the systematic review. Thirty-one of them, with a total of 1906 participants, were included in the network meta-analysis. The studies owned a low and moderate risk of bias. This analysis does not suffer from significant inconsistency. The difference between 4 groups 'self-assembled peptide (SAP) P11-4', 'P11-4 + Fluoride Varnish (FV)', 'Resin Infiltration (RI)', 'casein phosphor peptides-amorphous calcium fluoride phosphate (CPP-ACFP)' and the 'Control' group was found to be statistically significant. Compared to the 'FV' and 'casein phosphor peptides-amorphous calcium phosphate (CPP-ACP)' groups, the 'P11-4 + FV" group and 'RI" group made a significant difference. The hierarchy was evident in the SUCRA values of 7 therapies. P11-4 + FV and RI were considered effective therapies compared to the control group or the FV group (gold standard group). CONCLUSIONS: The available evidence suggests that resin infiltration and P11-4 in combination with fluoride varnish had advantages over gold standard (FV). The effect of tricalcium phosphate-based drugs and fluoride is not very noticeable. Overall, drugs based on P11-4 and resin infiltration will be better therapies. Using more than two drugs in combination also would increase efficacy.

Long-Term Chromatic Durability of White Spot Lesions through Employment of Infiltration Resin Treatment.

Background and Objectives: White spot lesions (WSLs) denote regions of subsurface demineralization on the enamel that manifest as opaque and milky-white regions. Treatment for WSLs is essential for both clinical and aesthetic reasons. Resin infiltration has been identified as the most efficacious solution for alleviating WSLs, but studies with long-term monitoring are scarce. The aim of this clinical study is to assess the color change stability of the lesion after four years of implementing the resin infiltration technique. Materials and Methods: Forty non-cavity and unrestored white spot lesions (WSLs) were treated with the resin infiltration technique. The color of the WSLs and adjacent healthy enamel (SAE) was assessed using a spectrophotometer at T0 (baseline), T1 (after treatment), T2 (1 year after) and T3 (4 years after). The Wilcoxon test was utilized to determine the significance of the variation of color (ΔE) between WSLs and SAE over the observed time periods. Results: When comparing the color difference ΔE (WSLs-SAE) at T0-T1, the Wilcoxon test demonstarated a statistically significant difference (p < 0.05). For ΔE (WSLs-SAE) at T1-T2 and T1-T3, the color variation was not statistically significant (p = 0.305 and p = 0.337). Conclusions: The study's findings indicate that the resin infiltration technique is an effective solution for resolving the appearance of WSLs, and the results have demonstrated stability for a minimum of four years.

Can the hydrogel form of sodium ascorbate be used to reverse compromised resin infiltrant penetration after bleaching?

Aims: The aim of this study was to investigate the effects of an antioxidant on the bleaching-induced reduction in the penetration depth of infiltrant resins. Materials and Methods: White spot lesions (WSLs) were created on 105 bovine tooth samples, each measuring 6 × 4 × 4 mm. Five samples were randomly selected for the examination of lesion characteristics. The remaining 100 samples were then divided into four groups (n = 25). In Group I, the WSLs were treated with resin infiltration (RI) only. RI was performed on Group II immediately after bleaching. In Group III, an antioxidant was applied for 2 h after bleaching, and this was immediately followed by RI. The Group IV samples were treated with RI at the end of a 1-week waiting period after bleaching. The penetration depths were evaluated through confocal laser scanning microscopy. Results: The lowest penetration rate, which was approximately 57%, was observed in Group II. This was followed by Group III (87%), Group IV (90%), and Group I (92%). Group II, in which the samples were infiltrated immediately after bleaching, had the lowest mean penetration percentage. All the bleached groups exhibited significantly lower penetration percentages than the nonbleached group (Group I) (P < 0.05). Antioxidant application increased the penetration significantly (P < 0.05). Conclusion: Application of sodium ascorbate was found to reverse the reduced resin penetration depth and penetration percentages resulting from bleaching. The postponement of adhesive procedures after bleaching yielded similar results.

RESIN INFILTRATION MAY BE A FEASIBLE OPTION TO ESTHETICALLY MASK ENAMEL WHITE SPOT LESIONS.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Bourouni S, Dritsas K, Kloukos D, Wierichs RJ. Efficacy of resin infiltration to mask post-orthodontic or non-post-orthodontic white spot lesions or fluorosis - a systematic review and meta-analysis. Clin Oral Investig. 2021 Aug;25(8):4711-4719. SOURCE OF FUNDING: University of Bern. TYPE OF STUDY/DESIGN: Systematic review with meta-analysis.

Efficacy of resin infiltration to mask post-orthodontic or non-post-orthodontic white spot lesions or fluorosis - a systematic review and meta-analysis.

OBJECTIVE: The present review systematically analyzed clinical studies investigating the efficacy of resin infiltration on post-orthodontic or non-post-orthodontic, white spot lesions (WSL), or fluorosis. MATERIALS: Five electronic databases (Central, PubMed, Ovid MEDLINE, Ovid EMBASE, LILACS) were screened. Article selection and data abstraction were done in duplicate. No language or time restrictions were applied. Outcomes were visual-tactile or DIAGNOdent measurements. RESULTS: Eleven studies with 1834 teeth being affected in 413 patients were included. Nine studies were randomized control trials, one a prospective cohort study, and one had an unclear study design. Meta-analysis could be performed for "resin infiltration vs. untreated control," "resin infiltration vs. fluoride varnish," and "resin infiltration without bleaching vs. resin infiltration with bleaching." WSL being treated with resin infiltration showed a significantly higher optical improvement than WSL without any treatment (standard mean difference (SMD) [95% CI] = 1.24 [0.59, 1.88], moderate level of evidence [visual-tactile assessment]) and with fluoride varnish application (mean difference (MD) [95% CI] = 4.76 [0.74, 8.78], moderate level of evidence [DIAGNOdent reading]). In patients with fluorosis, bleaching prior to resin infiltration showed no difference in the masking effect compared to infiltration alone (MD [95% CI] = - 0.30 [- 0.98, 0.39], moderate level of evidence). CONCLUSION: Resin infiltration has a significantly higher masking effect than natural remineralization or regular application of fluoride varnishes. However, although the evidence was graded as moderate, this conclusion is based on only very few well-conducted RCTs. CLINICAL RELEVANCE: Resin infiltration seems to be a viable option to esthetically mask enamel white spot lesions and fluorosis.

Resin infiltration of enamel white spot lesions: An ultramorphological analysis.

OBJECTIVE: There is not a clear understanding of the ultramorphology of enamel white spot lesions (WSLs). The purpose of this study is to characterize resin infiltration of enamel WSLs using electron microscopy. MATERIALS AND METHODS: Enamel sections with sound enamel and WSLs were sectioned from extracted teeth and assigned to three groups: (a) left untreated; (b) etched with 15% hydrochloric acid (Icon-Etch); (c) restored with the resin infiltration sequence (Icon-Etch, Icon-Dry, and Icon-Infiltrant). Restored specimens were demineralized to obtain replicas. Observations were carried out under a field-emission scanning electron microscope. RESULTS: Icon-Etch resulted in an array of pits and funneled holes on the WSL. Replicas of WSLs depicted 0.5-6.0-µm-thick shaggy resin tags up to a depth of 465 µm. Enamel crystallites were enveloped with resin at the bottom of the WSL forming a hybrid layer. CONCLUSIONS: The resin infiltrant filled the spaces between the crystallites and resulted in an enamel hybrid layer. CLINICAL SIGNIFICANCE: In addition to masking enamel WSLs, resin infiltration is able envelop residual enamel crystallites forming an enamel hybrid layer. This hybridization makes resin-embedded enamel more resistant to acid attack than sound enamel.

Strategies to optimize bonding of adhesive materials to molar-incisor hypomineralization-affected enamel: A systematic review.

BACKGROUND: Children with first permanent molar affected by molar-incisor hypomineralization (MIH) show high treatment failure rate. AIM: To conduct a systematic review on bonding of adhesive materials to MIH-affected enamel, so as to identify all the methods suggested to optimize it and to determine the best bonding protocol(s). DESIGN: An exhaustive literature search was conducted on MEDLINE/PubMed, the Cochrane Library, and Web of Science databases, up to October 2018. Laboratory and clinical studies, involving adhesive restorations bonded to MIH-affected enamel, with at least a comparative group were included. Two authors independently selected studies, collected data, and assessed bias risk. RESULTS: After title and abstract review and duplicate exclusion, 14 articles were selected on the 496 eligible papers. After full reading, 4 articles were excluded. Finally, 10 studies (6 laboratory and 4 clinical studies) were included. CONCLUSIONS: Bond strength of composite was not significantly different when using self-etch compared with etch-and-rinse adhesives. Deproteinization after etching for etch-and-rinse adhesives enhanced bond strength; this could allow to keep MIH-affected enamel. Icon® showed an erratic penetration; however, a preliminary deproteinization after etching could improve bond strength. A study reported no significant differences in sealant retention rate, whereas another recommended to previously apply an adhesive.

The Effect of Resin Infiltration on the Progression of Proximal Caries Lesions: A Randomized Clinical Trial.

OBJECTIVE: The aim of this clinical trial was to assess the effect of resin infiltration on the progression of proximal caries lesions. SUBJECTS AND METHODS: Forty-one patients, aged between 15 and 33 years, with 2 or more non-cavitated proximal caries lesions were included. In 41 of the adolescent and young adults, 45 pairs of proximal lesions with radiological extension into the inner and outer half of the enamel, or into the outer third of the dentin, were randomly allocated to the test groups (resin infiltration application + fluoridated toothpaste and flossing use) or to the control group (fluoridated toothpaste and flossing use). Standardized geometrically aligned digital bitewing radiographs were obtained using individual biting holders. The radiographic progression of the lesions was assessed after 1 year by digital-subtraction radiography. The McNemar test was used for statistical analysis. RESULTS: In the test group 1/45 of the lesions (2.2%) and in the control group 9/45 of the lesions (20%) showed progression. The caries progression rate of the control group was significantly higher than that of the test group (p < 0.05). CONCLUSIONS: Resin infiltration of proximal caries lesions is effective in reducing progression of the lesion.

Resin Infiltration in Dental Fluorosis Treatment-1-Year Follow-Up.

Background and objective: Dental fluorosis is a disease affecting dental hard tissues featured with white or yellowish lesions. Several treatments are proposed in the literature, some even invasive. This clinical study aimed to evaluate the effectiveness of resin infiltration in terms of lesions resolution, trend of sensitive teeth and satisfaction of patients over time. Methods and material: 200 fluorosis lesions were treated using ICON infiltrating resin (DMG, Hamburg, Germany). Parameters related to patients were collected by a questionnaire and analyzed aesthetic dissatisfaction about lesions, Shiff Air Index Sensitive Scale, sensitive teeth after treatment, the satisfaction of duration of treatment. The same operator measured dimensions of lesions Tooth Surface Index of Fluorosis (TSIF) and numbers of etching cycles needed for treating lesions. Statistical analysis was performed. The follow-up was of 1-year a measurement were performed at baseline (t0), immediately after the treatment (t1) and every three months during the observation period. Results: All lesions disappeared after one treatment. Pain or sensitive teeth were reported inside the 72 h and they disappeared after. Statistical analysis showed highly statistically correlation between etching cycles and the dimension of lesions and TSIF at the time-points evaluated as well as for pain during treatment, whereas a statistical significance was not noticed where etching cycles were correlated to sensitive teeth after 72 h. Overall, the treatment was found to be statistically significantly associated with differences in answers of aesthetic dissatisfaction between t0 and t1 and those collected between t1 and t2. Between t2 and t3 and between t3 and t4 no statistical differences were found in answers of patients about dissatisfaction, indicating the stability of the results. Conclusions: The ICON resin infiltration technique was found to be effective in lesions resolution with steady results.

Investigation of the esthetic outcomes of white spot lesion treatments.

OBJECTIVE: The present study compared the ability of bleaching, resin infiltration and microabrasion to restore the appearance of existing white spot lesions (WSL) on tooth surfaces as close as possible to that of the original healthy enamel. MATERIALS AND METHODS: Sixty extracted human teeth with WSL were randomly assigned to three treatment groups (20/group). Prior to treatment, the colour of the surrounding healthy enamel and the WSL were measured as the baseline and pre-treatment (PreRX) colours respectively using spectrophotometer based on CIE L*A*B. The L-value was used for the statistical comparison. WSLs in each group were treated respectively by bleaching, infiltration or microabrasion following the manufacturer's instructions. Colour measurement was repeated after treatment. Both intragroup and intergroup comparisons were performed using ANOVA followed by Tukey's multiple comparison test (α=0.05). RESULT: In all groups the mean L-values were significantly higher in PreRX WSL (P < 0.01; Tukey) compared to baseline (sound enamel). After treatment the difference in mean L-value between baseline and WSL increased significantly (P < 0.01, Tukey) in Bleaching and Microabrasion groups by 1.4% and 1% respectively, but decreased in Infiltration group by 3.4%. Thus resin infiltration decreased the L-value of the WSL, bringing it closer to the L-value of the sound enamel while bleaching and microabrasion increased the L-value. CONCLUSIONS: Among the three treatment modalities investigated in this study, resin infiltration was the most effective in masking the WSLs.

Effect of Resin Infiltration Technique on Improving Surface Hardness of Enamel Lesions: A Systematic Review and Meta-analysis.

OBJECTIVE: White spot lesion (WSL) is recognized as the first clinical sign of enamel caries; it is a very critical phase because it can be prevented from progression to frank caries by changing the surrounding destructive environment. The present study was undertaken to systematically review the effect of resin infiltration (RI) technique on surface hardness (SH) of WSL. METHODS: Five electronic databases were searched with proper key words. Related titles and abstracts, up to October 2018, were screened, selected, and subjected to quality assessments. After collecting data, meta-analyses were carried out to compare the effect of RI with untreated WSL and sound enamel by using the STATA software. RESULTS: A total of 4567 articles were included in the study after initial search. Finally, 10 studies were reliable enough in methodology to be included in the study. Metadata analyses, carried out on 7 studies that compared SH of RI group with untreated samples, showed a significant increase in SH with 3.66 mean difference (95% confidence interval = 2.56‒4.77, Q value = 36.07, I2 = 83.4%). However, meta-analysis on 4 studies that compared SH of RI with sound enamel showed a significant decrease in SH with -2.35 overall mean difference (95% confidence interval = -3.91-0.98, P = .00, Q value = 31.75, I2 = 90.6%). CONCLUSION: The RI technique can enhance SH of WSL; however, regaining the SH of RI-treated WSLs similar to sound enamel is doubtful. Application of RI is more effective than other methods, including application of fluoride, enamel pro-varnish, adhesive, and colloidal silica infiltration for enhancing SH of WSLs.

Resistance of resin-infiltrated enamel to surface changes in response to acidic challenge.

OBJECTIVE: To investigate the ability of resin infiltration to protect demineralized enamel against acidic challenge. MATERIALS AND METHODS: Forty-five extracted healthy premolars were selected for the study, each of which was sectioned vertically into 2 halves, giving 90 specimens. Specimens were then divided into three groups, where specimens of group A were not decalcified (control), while those of groups B and C were either subjected to decalcification only, or decalcification followed by Icon resin infiltration, respectively. Each group was further divided into three subgroups, according to the type of storage medium (water, Coca-Cola, or Redbull). Evaluation parameters included color difference and surface roughness. Scanning electron microscope was used to evaluate enamel surface topography. Statistical analysis was performed by ANOVA followed by least significant difference test. RESULTS: Although Coca-Cola caused the highest color change and surface roughness among the studied specimens, yet, the resin-infiltrated enamel was more resistant to surface changes than the nonresin infiltrated enamel, even under acid attack. CONCLUSION: Resin infiltration has the ability to provide and maintain protection to the demineralized enamel against acidic attack. CLINICAL SIGNIFICANCE: Resin infiltration may be considered as a promising solution to restore esthetic of demineralized enamel following orthodontic treatment and to protect it against acidic beverages.