Regulation of anion-Na+ coordination chemistry in electrolyte solvates for low-temperature sodium-ion batteries.

High-performance sodium storage at low temperature is urgent with the increasingly stringent demand for energy storage systems. However, the aggravated capacity loss is induced by the sluggish interfacial kinetics, which originates from the interfacial Na+ desolvation. Herein, all-fluorinated anions with ultrahigh electron donicity, trifluoroacetate (TFA-), are introduced into the diglyme (G2)-based electrolyte for the anion-reinforced solvates in a wide temperature range. The unique solvation structure with TFA- anions and decreased G2 molecules occupying the inner sheath accelerates desolvation of Na+ to exhibit decreased desolvation energy from 4.16 to 3.49 kJ mol-1 and 24.74 to 16.55 kJ mol-1 beyond and below -20 °C, respectively, compared with that in 1.0 M NaPF6-G2. These enable the cell of Na||Na3V2(PO4)3 to deliver 60.2% of its room-temperature capacity and high capacity retention of 99.2% after 100 cycles at -40 °C. This work highlights regulation of solvation chemistry for highly stable sodium-ion batteries at low temperature.

Step-by-step desolvation enables high-rate and ultra-stable sodium storage in hard carbon anodes.

Hard carbon is regarded as the most promising anode material for sodium-ion (Na-ion) batteries, owing to its advantages of high abundance, low cost, and low operating potential. However, the rate capability and cycle life span of hard carbon anodes are far from satisfactory, severely hindering its industrial applications. Here, we demonstrate that the desolvation process defines the Na-ion diffusion kinetics and the formation of a solid electrolyte interface (SEI). The 3A zeolite molecular sieve film on the hard carbon is proposed to develop a step-by-step desolvation pathway that effectively reduces the high activation energy of the direct desolvation process. Moreover, step-by-step desolvation yields a thin and inorganic-dominated SEI with a lower activation energy for Na+ transport. As a result, it contributes to greatly improved power density and cycling stability for both ester and ether electrolytes. When the above insights are applied, the hard carbon anode achieves the longest life span and minimum capacity fading rate at all evaluated current densities. Moreover, with the increase in current densities, an improved plateau capacity ratio is observed. This step-by-step desolvation strategy comprehensively enhances various properties of hard carbon anodes, which provides the possibility of building practical Na-ion batteries with high power density, high energy density, and durability.

Topotactic Syntopogenous Sodium Vanadium Fluoride for High-Performance Sodium-Ion Batteries: Electron and Sodium-Ion Reservoirs in Perovskite/Diperovskite Superlattice.

In order to simultaneously accelerate ion and electron transfer in sodium-ion battery (SIB) cathodes, a topotactic superlattice was utilized, in which the atomically intrinsic lattice-matching effect from inner to external surface can boost the charge transfer due to the disappearance of the heterojunction interface. Herein, a topotactic syntopogenous Na3VF6/NaVF3 superlattice formulated as Na2.9V1.1F6 (NVF) was synthesized by a facile one-step low-temperature hydrothermal reaction. NVF nanoparticles show an excellent Na+ storage capacity (∼205 mAh g-1) in a high voltage window up to 4.2 V with ultralong cycling stability. That is associated with the mixed occupancy of V and Na in NVF. The multivalent V centers serve as electron reservoirs to inhibit phase transformation, and the Na-enriched Na3VF6 with better electron conductivity acts as a Na+ reservoir for effective electron transfer. Highly reversible (de)intercalation of Na+ is achieved in the channel of perovskite-type NaVF3 with structural integrity.

Deciphering the Formation and Accumulation of Solid-Electrolyte Interphases in Na and K Carbonate-Based Batteries.

The continuous solid-electrolyte interphase (SEI) accumulation has been blamed for the rapid capacity loss of carbon anodes in Na and K ethylene carbonate (EC)/diethyl carbonate (DEC) electrolytes, but the understanding of the SEI composition and its formation chemistry remains incomplete. Here, we explain this SEI accumulation as the continuous production of organic species in solution-phase reactions. By comparing the NMR spectra of SEIs and model compounds we synthesized, alkali metal ethyl carbonate (MEC, M = Na or K), long-chain alkali metal ethylene carbonate (LCMEC, M = Na or K), and poly(ethylene oxide) (PEO) oligomers with ethyl carbonate ending groups are identified in Na and K SEIs. These components can be continuously generated in a series of solution-phase nucleophilic reactions triggered by ethoxides. Compared with the Li SEI formation chemistry, the enhancement of the nucleophilicity of an intermediate should be the cause of continuous nucleophilic reactions in the Na and K cases.

Designing a Magnesium/Sodium Hybrid Battery Using Hierarchical Iron Selenide Architecture as Cathode Material and Modified Dual-Ion Salts in Ether as Electrolyte.

We developed a magnesium/sodium (Mg/Na) hybrid battery using a hierarchical disk-whisker FeSe2 architecture (HD-FeSe2) as the cathode material and a modified dual-ion electrolyte. The polarizable Se2- anion reduced the Mg2+ migration barrier, and the 3D configuration possessed a large surface area, which facilitated both Mg2+/Na+ cation diffusion and electron transport. The dual-ion salts with NaTFSI in ether reduced the Mg plating/stripping overvoltage in a symmetric cell. The hybrid battery exhibited an energy density of 260.9 Wh kg-1 and a power density of 600.8 W kg-1 at 0.2 A g-1. It showed a capacity retention of 154 mAh g-1 and a Coulombic efficiency of over 99.5% under 1.0 A g-1 after 800 long cycles. The battery also displayed outstanding temperature tolerance. The findings of 3D architecture as cathode material and hybrid electrolyte provide a pathway to design a highly reliable Mg/Na hybrid battery.

Unraveling the Intrinsic Origin of the Superior Sodium-Ion Storage Performance of Metal Selenides Anode in Ether-Based Electrolytes.

Metal selenides show outstanding sodium-ion storage performance when matched with an ether-based electrolyte. However, the intrinsic origin of improvement and deterministic interface characteristics have not been systematically elucidated. Herein, employing FeSe2 anode as the model system, the electrochemical kinetics of metal selenides in ether and ester-based electrolytes and associated solid electrolyte interphase (SEI) are investigated in detail. Based on the galvanostatic intermittent titration technique and in situ electrochemical impedance spectroscopy, it is found that the ether-based electrolyte can ensure fast Na+ transfer and low interface impedance. Additionally, the ether-derived thin and smooth double-layer SEI, which is critical in facilitating ion transport, maintaining structural stability, and inhibiting electrolyte overdecomposition, is concretely visualized by transmission electron microscopy, atomic force microscopy, and depth-profiling X-ray photoelectron spectroscopy. This work provides a deep understanding of the optimization mechanism of electrolytes, which can guide available inspiration for the design of practical electrode materials.

3D Fast Sodium Transport Network of MoS2 Endowed by Coupling of Sulfur Vacancies and Sn Doping for Outstanding Sodium Storage.

A sulfur vacancy-rich, Sn-doped as well as carbon-coated MoS2 composite (Vs-SMS@C) is rationally synthesized via a simple hydrothermal method combined with ball-milling reduction, which enhances the sodium storage performance. Benefiting from the 3D fast Na+ transport network composed of the defective carbon coating, Mo─S─C bonds, enlarged interlayer spacing, S-vacancies, and lattice distortion in the composite, the Na+ storage kinetics is significantly accelerated. As expected, Vs-SMS@C releases an ultrahigh reversible capacity of 1089 mAh g-1 at 0.1 A g-1, higher than the theoretical capacity. It delivers a satisfactory capacity of 463 mAh g-1 at a high current density of 10 A g-1, which is the state-of-the-art rate capability compared to other MoS2 based sodium ion battery anodes to the knowledge. Moreover, a super long-term cycle stability is achieved by Vs-SMS@C, which keeps 91.6% of the initial capacity after 3000 cycles under the current density of 5 A g-1 in the voltage of 0.3-3.0 V. The sodium storage mechanism of Vs-SMS@C is investigated by employing electrochemical methods and ex situ techniques. The synergistic effect between S-vacancies and doped-Sn is evidenced by DFT calculations. This work opens new ideas for seeking excellent metal sulfide anodes.

Trifunctional L-Cysteine Assisted Construction of MoO2/MoS2/C Nanoarchitecture Toward High-Rate Sodium Storage.

The volume collapse and slow kinetics reaction of anode materials are two key issues for sodium ion batteries (SIBs). Herein, an "embryo" strategy is proposed for synthesis of nanorod-embedded MoO2/MoS2/C network nanoarchitecture as anode for SIBs with high-rate performance. Interestingly, L-cysteine which plays triple roles including sulfur source, reductant, and carbon source can be utilized to produce the sulfur vacancy-enriched heterostructure. Specifically, L-cysteine can combine with metastable monoclinic MoO3 nanorods at room temperature to encapsulate the "nutrient" of MoOx analogues (MoO2.5(OH)0.5 and MoO3·0.5H2O) and hydrogen-deficient L-cysteine in the "embryo" precursor affording for subsequent in situ multistep heating treatment. The resultant MoO2/MoS2/C presents a high-rate capability of 875 and 420 mAh g-1 at 0.5 and 10 A g-1, respectively, which are much better than the MoS2-based anode materials reported by far. Finite element simulation and analysis results verify that the volume expansion can be reduced to 42.8% from 88.8% when building nanorod-embedded porous network structure. Theoretical calculations reveal that the sulfur vacancies and heterointerface engineering can promote the adsorption and migration of Na+ leading to highly enhanced thermodynamic and kinetic reaction. The work provides an efficient approach to develop advanced electrode materials for energy storage.

Flexible Ti3 C2 Tx MXene Bonded Bio-Derived Carbon Fibers Support Tin Disulfide for Fast and Stable Sodium Storage.

High energy density and flexible electrodes, which have high mechanical properties and electrochemical stability, are critical to the development of wearable electronics. In this work, a free-standing MXene bonded SnS2 composited nitrogen-doped carbon fibers (MXene/SnS2 @NCFs) film is reported as a flexible anode for sodium-ion batteries. SnS2 nanoparticles with high-capacity properties are covalently decorated in bio-derived nitrogen-doped 1D carbon fibers (SnS2 @NCFs) and further assembled with highly conductive MXene sheets. The addition of bacterial cellulose (BC) can further improve the flexibility of the film. The unique 3D structure of points, lines, and planes can not only offset the disadvantage of low conductivity of SnS2 nanoparticles but also expand the distance between MXene sheets, which is conducive to the penetration of electrolytes. More importantly, the MXene sheets and N-doped 1D carbon fibers (NCFs) can accommodate the large volume expansion of SnS2 nanoparticles and trap polysulfide during the cycle. The MXene/SnS2 @NCFs film exhibits better sodium storage and excellent rate performance compared to the SnS2 @NCFs. The in situ XRD and ex situ (XRD, XPS, and HRTEM) techniques are used to analyze the sodiation process and to deeply study the reaction mechanism of the films. Finally, the quasi-solid-state full cells with MXene/SnS2 @NCFs and Na3 V2 (PO4 )3 @carbon cloth (NVP@CC) fully demonstrate the application potential of the flexible electrodes.

Deciphering Sodium-Ion Storage: 2D-Sulfide versus Oxide Through Experimental and Computational Analyses.

Transition metal derivatives exhibit high theoretical capacity, making them promising anode materials for sodium-ion batteries. Sulfides, known for their superior electrical conductivity compared to oxides, enhance charge transfer, leading to improved electrochemical performance. Here, a hierarchical WS2 micro-flower is synthesized by thermal sulfurization of WO3. Comprising interconnected thin nanosheets, this structure offers increased surface area, facilitating extensive internal surfaces for electrochemical redox reactions. The WS2 micro-flower demonstrates a specific capacity of ≈334 mAh g-1 at 15 mA g-1, nearly three times higher than its oxide counterpart. Further, it shows very stable performance as a high-temperature (65 °C) anode with ≈180 mAh g-1 reversible capacity at 100 mA g-1 current rate. Post-cycling analysis confirms unchanged morphology, highlighting the structural stability and robustness of WS2. DFT calculations show that the electronic bandgap in both WS2 and WO3 increases when going from the bulk to monolayers. Na adsorption calculations show that Na atoms bind strongly in WO3 with a higher energy diffusion barrier when compared to WS2, corroborating the experimental findings. This study presents a significant insight into electrode material selection for sodium-ion storage applications.

Nanohybrids of BCN-Fe1-xS for Sodium and Lithium Hybrid Ion Capacitors.

Hybrid ion capacitors (HIC) are receiving a lot of attention due to their potential to achieve high energy and power densities, but they remain insufficient. It is imperative to explore outstanding and environmentally benign electrode materials to achieve high-performing HIC systems. Here, a unique boron carbon nitride (BCN)-based HIC system that comprises a microporous BCN structure and Fe1-xS nanoparticle incorporated BCN nanosheets (BNF) as cathode and anode, respectively is reported. The BNF is prepared through a facile one-pot calcination process using dithiooxamide (DTO), boric acid, and iron source. In situ, crystal growth of Fe1-xS facilitates the formation of BCN structure through the creation of holes/defects in the polymeric structure. The first principle density functional (DFT) theory simulations demonstrate the structural and electronic properties of the hybrid of BCN and Fe1-xS as compelling anode materials for HIC applications. The DFT calculations reveal that both BCN and BNF structures have excellent metallic characters with Li+ storage capacities of 128.4 and 1021.38 mAh g-1 respectively. These findings are confirmed experimentally where the BCN-based HIC system delivers exceptional energy and power densities of 267.5 Wh kg-1/749.5 W kg-1 toward Li+ storage, which outweighs previous HIC performances and demonstrates favorable performance for Li+ and Na+ storages.

Synergistically Coupling Atomic-Level Defect-Manipulation and Nanoscopic-Level Interfacial Engineering Enables Fast and Durable Sodium Storage.

Through inducing interlayer anionic ligands and functionally modifying conductive carbon-skeleton on the transition metal chalcogenides (TMCs) parent to achieve atomic-level defect-manipulation and nanoscopic-level architecture design is of great significance, which can broaden interlayer distance, optimize electronic structure, and mitigate structural deformation to endow high-efficiency battery performance of TMCs. Herein, an intriguing 3D biconcave hollow-tyre-like anode constituted by carbon-packaged defective-rich SnSSe nanosheet grafting onto Aspergillus niger spores-derived hollow-carbon (ANDC@SnSSe@C) is reported. Systematically experimental investigations and theoretical analyses forcefully demonstrate the existence of anion Se ligand and outer-carbon all-around encapsulation on the ANDC@SnSSe@C can effectively yield abundant structural defects and Na+-reactivity sites, accelerate rapid ion migration, widen interlayer spacing, as well as relieve volume expansion, thus further resolving the critical issues throughout the charge-discharge processes. As anticipated, as-fabricated ANDC@SnSSe@C anode contributes extraordinary reversible capacity, wonderful cyclic lifespan with 83.4% capacity retention over 2000 cycles at 20.0 A g-1, and exceptional rate capability. A series of correlated kinetic investigations and ex situ characterizations deeply reveal the underlying springheads for the ion-transport kinetics, as well as synthetically elucidate phase-transformation mechanism of the ANDC@SnSSe@C. Furthermore, the ANDC@SnSSe@C-based sodium ion full cell and hybrid capacitor offer high-capacity contribution and remarkable energy-density output, indicative of its great practicability.

Dehydration Achieving the Iron Spin State Regulation of Prussian Blue for Boosted Sodium-Ion Storage Performance.

Prussian blue analogs (PBAs) show promise as cathodes for sodium-ion batteries due to their notable cycle stability, cost-effectiveness, and eco-friendly nature, yet the presence of interstitial water limits the specific capacity and obstructs Na+ mobility within the material. Although considerable experimental efforts are focused on dehydrating water for capacity enhancement, there is still a deficiency of a comprehensive understanding of the low capacity of low-spin Fe resulting from interstitial water, which holds significance in Na+ storage. This study introduces a novel gas-assisted heat treatment method to efficiently remove interstitial water from Fe-based PBA (NaFeHCF) electrodes and combines experiments and theoretical calculations to reveal the iron spin state regulation that is related to the capacity enhancement mechanism. This dehydration strategy significantly enhances battery capacity, especially the portion at higher voltages (3.4-4.0 V). The increase in capacity is attributed to the following factors: an enhanced proportion of Fe2+, reduced water content which facilitates faster charge transfer, and the activation of low spin Fe2+. The optimized NaFeHCF demonstrated impressive half-cell performance of retaining 87.3% capacity after 2000 cycles at a 5 C rate and achieving 100 mAh g-1 capacity over 200 cycles when being paired with hard carbon, exhibiting its practical potential.

Achieving High Rate and Long Cycle Performance of Na2FePO4F Cathode Through Co-Modification of Ti Doping and Carbon Coating.

Layered Na2FePO4F (NFPF) cathode material has received widespread attention due to its green nontoxicity, abundant raw materials, and low cost. However, its poor inherent electronic conductivity and sluggish sodium ion transportation seriously impede its capacity delivery and cycling stability. In this work, NFPF by Ti doping and conformal carbon layer coating via solid-state reaction is modified. The results of experimental study and density functional theory calculations reveal that Ti doping enhances intrinsic conductivity, accelerates Na-ion transport, and generates more Na-ion storage sites, and pyrolytic carbon from polyvinylpyrrolidone (PVP) uniformly coated on the NFPF surface improves the surface/interface conductivity and suppresses the side reactions. Under the combined effect of Ti doping and carbon coating, the optimized NFPF (marked as 5T-NF@C) exhibits excellent electrochemical performance, with a high capacity of 108.4 mAh g-1 at 0.2C, a considerable capacity of 80.0 mAh g-1 even at high current density of 10C, and a high capacity retention rate of 81.8% after 2000 cycles at 10C. When assembled into a full cell with a hard carbon anode, 5T-NF@C also show good applicability. This work indicates that co-modification of Ti doping and carbon coating makes NFPF achieve high rate and long cycle performance for sodium-ion batteries.

A Defective Disc-Like Cu1.96S Anode Material with the Efficient Cu Vacancies for High-Performance Sodium-Ion Storage.

Due to their significant capacity and reliable reversibility, transition metal sulphides (TMSs) have received attention as potential anode materials for sodium-ion batteries (SIBs). Nonetheless, a prevalent challenge with TMSs lies in their significant volume expansion and sluggish kinetics, impeding their capacity for rapid and enduring Na+ storage. Herein, a Cu1.96S@NC nanodisc material enriched with copper vacancies is synthesised via a hydrothermal and annealing procedure. Density functional theory (DFT) calculations reveal that the incorporation of copper vacancies significantly boosts electrical conductivity by reducing the energy barrier for ion diffusion, thereby promoting efficient electron/ion transport. Moreover, the presence of copper vacancies creates ample active sites for the integration of sodium ions, streamlines charge transfer, boosts electronic conductivity, and, ultimately, significantly enhances the overall performance of SIBs. This novel anode material, Cu1.96S@NC, demonstrates a reversible capacity of 339 mAh g-1 after 2000 cycles at a rate of 5 A g-1. In addition, it maintains a noteworthy reversible capacity of 314 mAh g-1 with an exceptional capacity retention of 96% even after 2000 cycles at 20 A g-1. The results demonstrate that creating cationic vacancies is a highly effective strategy for engineering anode materials with high capacity and rapid reactivity.

Enabling Rapid and Stable Sodium Storage via a P2-Type Layered Cathode with High-Voltage Zero-Phase Transition Behavior.

Currently, a major target in the development of Na-ion batteries is the concurrent attainment of high-rate capacity and long cycling stability. Herein, an advanced Na-ion battery with high-rate capability and long cycle stability based on Li/Ti co-doped P2-type Na0.67Mn0.67Ni0.33O2, a host material with high-voltage zero-phase transition behavior and fast Na+ migration/conductivity during dynamic de-embedding process, is constructed. Experimental results and theoretical calculations reveal that the two-element doping strategy promotes a mutually reinforcing effect, which greatly facilitates the transfer capability of Na+. The cation Ti4+ doping is a dominant high voltage, significantly elevating the operation voltage to 4.4 V. Meanwhile, doping Li+ shows the function in charge transfer, improving the rate performance and prolonging cycling lifespan. Consequently, the designed P2-Na0.75Mn0.54Ni0.27Li0.14Ti0.05O2 cathode material exhibits discharge capacities of 129, 104, and 85 mAh g- 1 under high voltage of 4.4 V at 1, 10, and 20 C, respectively. More importantly, the full-cell delivers a high initial capacity of 198 mAh g-1 at 0.1 C (17.3 mA g-1) and a capacity retention of 73% at 5 C (865 mA g-1) after 1000 cycles, which is seldom witnessed in previous reports, emphasizing their potential applications in advanced energy storage.

Pressure-Induced Defects and Reduced Size Endow TiO2 with High Capacity over 20 000 Cycles and Excellent Fast-Charging Performance in Sodium Ion Batteries.

Anatase TiO2 as sodium-ion-battery anode has attracted increased attention because of its low volume change and good safety. However, low capacity and poor rate performance caused by low electrical conductivity and slow ion diffusion greatly impede its practical applications. Here, a bi-solvent enhanced pressure strategy that induces defects (oxygen vacancies) into TiO2 via N doping and reduces its size by using mutual-solvent ethanol and dopant dimethylformamide as pressure-increased reagent of tetrabutyl orthotitanate tetramer is proposed to fabricate N-doped TiO2/C nanocomposites. The induced defects can increase ion storage sites, improve electrical conductivity, and decrease bandgap and ion diffuse energy barrier of TiO2. The size reduction increases contact interfaces between TiO2 and C and shortens ion diffuse distance, thus increasing extra ion storage sites and boosting ion diffusion rate of TiO2. The N-doped TiO2 possesses highly stable crystal structure with a slightly increase of 0.86% in crystal lattice spacing and 3.2% in particle size after fully sodiation. Consequently, as a sodium-ion battery anode, the nanocomposite delivers high capacity and superior rate capability along with ultralong cycling life. This work proposes a novel pressure-induced synthesis strategy that provides unique guidance for designing TiO2-based anode materials with high capacity and excellent fast-charging capability.

Full Exploitation of Charge Compensation of O3-type Cathode Toward High Energy Sodium-Ion Batteries by High Entropy Strategy.

O3-type cathodes with sufficient Na content are considered as promising candidates for sodium-ion batteries (SIBs). However, these cathodes suffer from insufficient utilization of the active elements, restraining the delivered capacity. In this work, a high entropy strategy is applied to a typical O3 cathode NaLi0.1Ni0.35Mn0.55O2 (NLNM), forming a high entropy oxide NaLi0.1Ni0.15Cu0.1Mg0.1Ti0.2Mn0.35O2 (Na-HE). Results show that the active elements are fully exploited in Na-HE, with a two-electron reaction by Ni2+/4+ (further extended to Cu redox and even oxygen redox), vastly different from a one-electron reaction of Ni2+/3+ in NLNM. The full utilization of the active elements dramatically improves the output capacity of the cathode (122.6 mAh g-1 of Na-HE versus 81 mAh g-1 of NLNM). Moreover, the detrimental phase transition is well suppressed in Na-HE. The cathode exhibits high capacity retention of 88.7% after 100 cycles at 130 mA g-1, compared to only 36.4% for NLNM. These findings provide new insight for the design of new cathode materials for SIBs with high energy density and robust stability.

Electron-Spin Regulation Driving Heterointerface Electron Distribution and Phase Transition toward Ultrafast and Durable Sodium Storage.

Phase engineering is an effective strategy for modulating the electronic structure and electron transfer mobility of cobalt selenide (CoSe2) with remarkable sodium storage. Nevertheless, it remains challenging to improve fast-charging and cycling performance. Herein, a heterointerface coupling induces phase transformation from cubic CoSe2 to orthorhombic CoSe2 accompanied by the formation of MoSe2 to construct a CoSe2/MoSe2 heterostructure decorated with N-doped carbon layer on a 3D graphene foam (CoSe2/MoSe2@NC/GF). The incorporated Mo cations in the bridged o-CoSe2/MoSe2 not only act an electron donor to regulate charge-spin configurations with more active electronic states but also trigger the upshift of d/p band centers and a decreased ∆d-p band center gap, which greatly enhances ion adsorption capability and lowers the ion diffusion barrier. As expected, the CoSe2/MoSe2@NC/GF anode demonstrates a high-rate capability of 447 mAh g-1 at 2 A g-1 and an excellent cyclability of 298 mAh g-1 at 1 A g-1 over 1000 cycles. The work deepens the understanding of the elaborate construction of heterostructured electrodes for high-performance SIBs.

Tailoring Pseudo-Graphitic Domain by Molybdenum Modification to Boost Sodium Storage Capacity and Durability for Hard Carbon.

Hard carbon (HC) stands out as the most prospective anode for sodium-ion batteries (SIBs) with significant potential for commercial applications. However, some long-standing and intractable obstacles, like low first coulombic efficiency (ICE), poor rate capability, storage capacity, and cycling stability, have severely hindered the conversion process from laboratory to commercialization. The above-mentioned issues are closely related to Na+ transfer kinetics, surface chemistry, and internal pseudo-graphitic carbon content. Herein, constructing molybdenum-modified hard carbon solid spheres (Mo2C/HC-5.0), both the ion transfer kinetics, surface chemistry, and internal pseudo-graphitic carbon content are comprehensively improved. Specifically, Mo2C/HC-5.0 with higher pseudo-graphitic carbon content provides a large number of active sites and a more stable layer structure, resulting in improved sodium storage capacity, rate performance, and cycling stability. Moreover, the lower defect density and specific surface area of Mo2C/HC-5.0 further enhance ICE and sodium storage capacity. Consequently, the Mo2C/HC-5.0 anode achieves a high capacity of 410.7 mA h g-1 and an ICE of 83.9% at 50 mA g-1. Furthermore, the material exhibits exceptional rate capability and cycling stability, maintaining a capacity of 202.8 mA h g-1 at 2 A g-1 and 214.9 mA h g-1 after 800 cycles at 1 A g-1.