Enhanced activity for reduction of 4-nitrophenol of Ni/single-walled carbon nanotube prepared by super-growth method.

In this study, we synthesised the Ni/single-walled carbon nanotube prepared by the super-growth method (SG-SWCNTs). In this approach, the Ni nanoparticles were immobilised by an impregnation method using the SG-SWCNTs with high specific surface areas (1144 m2g-1). The scanning electron microscopy images confirmed that the SG-SWCNTs exhibit the fibriform morphology corresponding to the carbon nanotubes. In addition, component analysis of the obtained samples clarified that the Ni nanoparticles were immobilised on the surface of the SG-SWCNTs. Next, we evaluated the activity for the reduction of 4-nitoropenol in the presence of the Ni/SG-SWCNTs. Additionally, the Ni/graphene, which was obtained by the same synthetic method, was utilised in this reaction. The rate of reaction activity of the Ni/SG-SWCNTs finished faster than that of the Ni/GPs. From this result, the pseudo-first-order kinetic rate constantkfor the Ni/SG-SWCNTs and the Ni/GPs was calculated respectively at 0.083 and 0.070 min-1, indicating that the Ni/SG-SWCNTs exhibits higher activity.

N-doped porous carbon supported Ni catalysts derived from modified Ni-MOF-74 for highly effective and selective catalytic hydrodechlorination of 1,2-dichloroethane to ethylene.

Metal-organic frameworks (MOFs) have received significant attention as promising precursors or sacrificial templates in the preparation of porous carbon supported catalysts. In this study, N-doped porous carbon supported Ni catalysts (denoted as Ni/NC) were prepared using furfuryl alcohol (FA) loaded Ni-MOF-74 as the precursor followed by NH4OH treatment and pyrolysis under N2 atmosphere. For comparison purpose, Ni catalysts supported on porous carbon (denoted as Ni/C) were also prepared by direct pyrolysis of Ni-MOF-74. The selective gas phase catalytic hydrodechlorination of 1,2-dichloroethane to ethylene was carried out to evaluate the catalytic performances of the catalysts. It was found that for Ni catalysts prepared at the same pyrolysis temperature, Ni particle sizes in Ni/NC catalysts were significantly smaller (20-40% smaller) than that of Ni/C. This reflected that pre-modification of Ni-MOF-74 using FA and NH4OH could effectively increase Ni dispersion in Ni catalysts derived from Ni-MOF-74. Moreover, Ni/NC had a markedly stronger ability to form spillover H2 owing to the enhanced metal-support interactions by N-doping. Accordingly, Ni/NC catalysts exhibited much higher catalytic activities than Ni/C catalysts. The turnover frequencies of Ni/NC catalysts were found to be 1.22-1.65 times higher than Ni/C catalysts. Increasing pyrolysis temperature led to decreased catalytic activities of both Ni/C and Ni/NC catalysts, due to the aggregation of Ni particles at higher treatment temperature. The findings from this study demonstrate that the MOF-mediated synthesis method offers a promising way to prepare Ni-based catalysts for catalytic hydrodechlorination of chlorinated hydrocarbons.

Template-Mediated Ni(II) Dispersion in Mesoporous SiO2 for Preparation of Highly Dispersed Ni Catalysts: Influence of Template Type.

Supported Ni catalysts on three mesoporous SiO2 supports (i.e., SBA-15, MCM-41, and HMS) were prepared using a solid-state reaction between Ni(NO3)2 and organic template-occluded mesoporous SiO2. For comparison, supported Ni catalysts on mesoporous SiO2 synthesized by the conventional impregnation method were also included. The catalysts were characterized by scanning electron microscopy, X-ray diffraction, UV-vis diffuse reflectance spectroscopy, N2 adsorption, X-ray photoelectron spectroscopy, H2 temperature-programmed reduction, transmission electron microscopy, and transmission electron microscopy-energy-dispersive X-ray. The catalytic properties of the catalysts were evaluated using gas-phase catalytic hydrodechlorination of 1,2-dichloroethane. The results showed that upon grinding Ni(NO3)2 with template-occluded mesoporous SiO2, strong coordination between Ni2+ and dodecylamine was identified in the Ni(NO3)2-HMS system. Additionally, the results of H2 temperature-programmed reduction revealed that NiO in calcined NiO/HMS was reduced at higher temperature than those in calcined NiO/SBA-15 and NiO/MCM-41, reflecting the presence of a strong interaction between NiO and mesoporous SiO2 in NiO/HMS. Consistently, the average particle sizes of metallic Ni were found to be 2.7, 3.4, and 9.6 nm in H2-reduced Ni/HMS, Ni/SBA-15, and Ni/MCM-41, respectively, indicative of a much higher Ni dispersion in Ni/HMS. For the catalytic hydrodechlorination of 1,2-dichloroethane, Ni/MCM-41 synthesized by the solid-state reaction method exhibited a catalytic activity similar to that prepared by the impregnation method, while higher catalytic activities were observed on Ni/HMS and Ni/SBA-15 than on their counterparts prepared by the impregnation method. Furthermore, a higher conversion was identified on Ni/HMS than on Ni/SBA-15 and Ni/MCM-41, highlighting the importance of template type for the preparation of highly dispersed metal catalysts on mesoporous SiO2.