Ultrathin Ga2O3 Photodetector with Fast Response and Trajectory Tracking Capability Fabricated by Liquid Metal Oxidation.

Low-dimensional Ga2O3 demonstrates a unique ultraviolet photoresponse and could be used in various electronic and optical systems. However, the low-dimensional Ga2O3 photodetector is faced with the challenges of a complex preparation process and poor device performance. In this work, ultrathin Ga2O3 layers with ∼7 nm thickness are prepared on quartz rods by UV exposure to liquid gallium. Benefiting from low-density oxygen vacancy defects cured by UV exposure, the low-dimensional Ga2O3 photodetector exhibits a high response speed (rise: 64.7 µs; fall: 51.4 µs) and an exceptional linear dynamic range of 120 dB. Furthermore, the photodetector array based on these ultrathin Ga2O3 shows an effective trajectory tracking capability by monitoring UV source motion. This work develops a simple preparation method to construct a low-dimensional UV photodetector array with fast response and useful trajectory tracking capability, exhibiting the significance of ultrathin Ga2O3 in UV optoelectronics.

Design, Construction, and Validation of an Experimental Electric Vehicle with Trajectory Tracking.

This research presents an experimental electric vehicle developed at the Tecnológico Nacional de México Celaya campus. It was decided to use a golf cart-type gasoline vehicle as a starting point. Initially, the body was removed, and the vehicle was electrified, meaning its engine was replaced with an electric one. Subsequently, sensors used to measure the vehicle states were placed, calibrated, and instrumented. Additionally, a mathematical model was developed along with a strategy for the parametric identification of this model. A communication scheme was implemented consisting of four slave devices responsible for controlling the accelerator, brake, steering wheel, and measuring the sensors related to odometry. The master device is responsible for communicating with the slaves, displaying information on a screen, creating a log, and implementing trajectory tracking techniques based on classical, geometric, and predictive control. Finally, the performance of the control algorithms implemented on the experimental prototype was compared in terms of tracking error and control input across three different types of trajectories: lane change, right-angle curve, and U-turn.

Time-Optimal Trajectory Planning and Tracking for Autonomous Vehicles.

This article presents a hierarchical control framework for autonomous vehicle trajectory planning and tracking, addressing the challenge of accurately following high-speed, at-limit maneuvers. The proposed time-optimal trajectory planning and tracking (TOTPT) framework utilizes a hierarchical control structure, with an offline trajectory optimization (TRO) module and an online nonlinear model predictive control (NMPC) module. The TRO layer generates minimum-lap-time trajectories using a direct collocation method, which optimizes the vehicle's path, velocity, and control inputs to achieve the fastest possible lap time, while respecting the vehicle dynamics and track constraints. The NMPC layer is responsible for precisely tracking the reference trajectories generated by the TRO in real time. The NMPC also incorporates a preview algorithm that utilizes the predicted future travel distance to estimate the optimal reference speed and curvature for the next time step, thereby improving the overall tracking performance. Simulation results on the Catalunya circuit demonstrated the framework's capability to accurately follow the time-optimal raceline at an average speed of 116 km/h, with a maximum lateral error of 0.32 m. The NMPC module uses an acados solver with a real-time iteration (RTI) scheme, to achieve a millisecond-level computation time, making it possible to implement it in real time in autonomous vehicles.

Artificial Potential Field Based Trajectory Tracking for Quadcopter UAV Moving Targets.

The trajectory or moving-target tracking feature is desirable, because it can be used in various applications where the usefulness of UAVs is already proven. Tracking moving targets can also be applied in scenarios of cooperation between mobile ground-based and flying robots, where mobile ground-based robots could play the role of mobile landing pads. This article presents a novel proposition of an approach to position-tracking problems utilizing artificial potential fields (APF) for quadcopter UAVs, which, in contrast to well-known APF-based path planning methods, is a dynamic problem and must be carried out online while keeping the tracking error as low as possible. Also, a new flight control is proposed, which uses roll, pitch, and yaw angle control based on the velocity vector. This method not only allows the UAV to track a point where the potential function reaches its minimum but also enables the alignment of the course and velocity to the direction and speed given by the velocity vector from the APF. Simulation results present the possibilities of applying the APF method to holonomic UAVs such as quadcopters and show that such UAVs controlled on the basis of an APF behave as non-holonomic UAVs during 90° turns. This allows them and the onboard camera to be oriented toward the tracked target. In simulations, the AR Drone 2.0 model of the Parrot quadcopter is used, which will make it possible to easily verify the method in real flights in future research.

USV Trajectory Tracking Control Based on Receding Horizon Reinforcement Learning.

We present a novel approach for achieving high-precision trajectory tracking control in an unmanned surface vehicle (USV) through utilization of receding horizon reinforcement learning (RHRL). The control architecture for the USV involves a composite of feedforward and feedback components. The feedforward control component is derived directly from the curvature of the reference path and the dynamic model. Feedback control is acquired through application of the RHRL algorithm, effectively addressing the problem of achieving optimal tracking control. The methodology introduced in this paper synergizes with the rolling time domain optimization mechanism, converting the perpetual time domain optimal control predicament into a succession of finite time domain control problems amenable to resolution. In contrast to Lyapunov model predictive control (LMPC) and sliding mode control (SMC), our proposed method employs the RHRL controller, which yields an explicit state feedback control law. This characteristic endows the controller with the dual capabilities of direct offline and online learning deployment. Within each prediction time domain, we employ a time-independent executive-evaluator network structure to glean insights into the optimal value function and control strategy. Furthermore, we substantiate the convergence of the RHRL algorithm in each prediction time domain through rigorous theoretical proof, with concurrent analysis to verify the stability of the closed-loop system. To conclude, USV trajectory control tests are carried out within a simulated environment.

Video-Based Identification and Prediction Techniques for Stable Vessel Trajectories in Bridge Areas.

In recent years, the global upswing in vessel-bridge collisions underscores the vital need for robust vessel track identification in accident prevention. Contemporary vessel trajectory identification strategies often integrate target detection with trajectory tracking algorithms, employing models like YOLO integrated with DeepSORT or Bytetrack algorithms. However, the accuracy of these methods relies on target detection outcomes and the imprecise boundary acquisition method results in erroneous vessel trajectory identification and tracking, leading to both false positives and missed detections. This paper introduces a novel vessel trajectory identification framework. The Co-tracker, a long-term sequence multi-feature-point tracking method, accurately tracks vessel trajectories by statistically calculating the translation and heading angle transformation of feature point clusters, mitigating the impact of inaccurate vessel target detection. Subsequently, vessel trajectories are predicted using a combination of Long Short-Term Memory (LSTM) and a Graph Attention Neural Network (GAT) to facilitate anomaly vessel trajectory warnings, ensuring precise predictions for vessel groups. Compared to prevalent algorithms like YOLO integrated with DeepSORT, our proposed method exhibits superior accuracy and captures crucial heading angle features. Importantly, it effectively mitigates the common issues of false positives and false negatives in detection and tracking tasks. Applied in the Three Rivers area of Ningbo, this research provides real-time vessel group trajectories and trajectory predictions. When the predicted trajectory suggests potential entry into a restricted zone, the system issues timely audiovisual warnings, enhancing real-time alert functionality. This framework markedly improves vessel traffic management efficiency, diminishes collision risks, and ensures secure navigation in multi-target and wide-area vessel scenarios.

Robust Output Feedback Stabilization and Tracking for an Uncertain Nonholonomic Systems with Application to a Mobile Robot.

This paper presents a novel robust output feedback control that simultaneously performs both stabilization and trajectory tracking for a class of underactuated nonholonomic systems despite model uncertainties, external disturbance, and the absence of velocity measurement. To solve this challenging problem, a generalized normal form has been successfully created by employing an input-output feedback linearization approach and a change in coordinates (diffeomorphism). This research mainly focuses on the stabilization problem of nonholonomic systems that can be transformed to a normal form and pose several challenges, including (i) a nontriangular normal form, (ii) the internal dynamics of the system are non-affine in control, and (iii) the zero dynamics of the system are not in minimum phase. The proposed scheme utilizes combined backstepping and sliding mode control (SMC) techniques. Furthermore, the full-order high gain observer (HGO) has been developed to estimate the derivative of output functions and internal dynamics. Then, full-order HGO and the backstepping SMC have been integrated to synthesize a robust output feedback controller. A differential-drive type (2,0) the wheeled mobile robot has been considered as an example to support the theoretical results. The simulation results demonstrate that the backstepping SMC exhibits robustness against bounded uncertainties.

Collision Avoidance Path Planning and Tracking Control for Autonomous Vehicles Based on Model Predictive Control.

In response to the fact that autonomous vehicles cannot avoid obstacles by emergency braking alone, this paper proposes an active collision avoidance method for autonomous vehicles based on model predictive control (MPC). The method includes trajectory tracking, adaptive cruise control (ACC), and active obstacle avoidance under high vehicle speed. Firstly, an MPC-based trajectory tracking controller is designed based on the vehicle dynamics model. Then, the MPC was combined with ACC to design the control strategies for vehicle braking to avoid collisions. Additionally, active steering for collision avoidance was developed based on the safety distance model. Finally, considering the distance between the vehicle and the obstacle and the relative speed, an obstacle avoidance function is constructed. A path planning controller based on nonlinear model predictive control (NMPC) is designed. In addition, the alternating direction multiplier method (ADMM) is used to accelerate the solution process and further ensure the safety of the obstacle avoidance process. The proposed algorithm is tested on the Simulink and CarSim co-simulation platform in both static and dynamic obstacle scenarios. Results show that the method effectively achieves collision avoidance through braking. It also demonstrates good stability and robustness in steering to avoid collisions at high speeds. The experiments confirm that the vehicle can return to the desired path after avoiding obstacles, verifying the effectiveness of the algorithm.

Research on Intelligent Vehicle Trajectory Tracking Control Based on Improved Adaptive MPC.

Intelligent vehicle trajectory tracking exhibits problems such as low adaptability, low tracking accuracy, and poor robustness in complex driving environments with uncertain road conditions. Therefore, an improved method of adaptive model predictive control (AMPC) for trajectory tracking was designed in this study to increase the corresponding tracking accuracy and driving stability of intelligent vehicles under uncertain and complex working conditions. First, based on the unscented Kalman filter, longitudinal speed, yaw speed, and lateral acceleration were considered as the observed variables of the measurement equation to estimate the lateral force of the front and rear tires accurately in real time. Subsequently, an adaptive correction estimation strategy for tire cornering stiffness was designed, an AMPC method was established, and a dynamic prediction time-domain adaptive model was constructed for optimization according to vehicle speed and road adhesion conditions. The improved AMPC method for trajectory tracking was then realized. Finally, the control effectiveness and trajectory tracking accuracy of the proposed AMPC technique were verified via co-simulation using CarSim and MATLAB/Simulink. From the results, a low lateral position error and heading angle error in trajectory tracking were obtained under different vehicle driving conditions and road adhesion conditions, producing high trajectory-tracking control accuracy. Thus, this work provides an important reference for improving the adaptability, robustness, and optimization of intelligent vehicle tracking control systems.

A Geometric Approach towards Inverse Kinematics of Soft Extensible Pneumatic Actuators Intended for Trajectory Tracking.

Soft robots are interesting examples of hyper-redundancy in robotics. However, the nonlinear continuous dynamics of these robots and the use of hyper-elastic and visco-elastic materials make modeling these robots more complicated. This study presents a geometric inverse kinematics (IK) model for trajectory tracking of multi-segment extensible soft robots, where each segment of the soft actuator is geometrically approximated with a rigid links model to reduce the complexity. In this model, the links are connected with rotary and prismatic joints, which enable both the extension and rotation of the robot. Using optimization methods, the desired configuration variables of the soft actuator for the desired end-effector positions were obtained. Furthermore, the redundancy of the robot is applied for second task applications, such as tip angle control. The model's performance was investigated through kinematics and dynamics simulations and numerical benchmarks on multi-segment soft robots. The results showed lower computational costs and higher accuracy compared to most existing models. The method is easy to apply to multi-segment soft robots in both 2D and 3D, and it was experimentally validated on 3D-printed soft robotic manipulators. The results demonstrated the high accuracy in path following using this technique.

A Generalized Hamilton Robust Control Scheme of Trajectory Tracking for Intelligent Vehicles.

To ensure the accuracy and stability of intelligent-vehicle-trajectory tracking, a robust trajectory-tracking control strategy based on generalized Hamilton theory is proposed. Firstly, a dynamic Hamilton dissipative controller (DHDC) and trajectory-tracking Hamilton dissipative controller (TTHDC) were designed based on the established vehicle-dynamics control system and trajectory-tracking control system using the orthogonal decomposition method and control-switching method. Next, the feedback-dissipative Hamilton realizations of the two systems were obtained separately to ensure the convergence of the system. Secondly, based on the dissipative Hamilton system designed by TTHDC, a generalized Hamilton robust controller (GHRC) was designed. Finally, the co-simulation of Carsim and MATLAB/Simulink was used to verify the effectiveness of the three control algorithms. The simulation results show that DHDC and TTHDC can achieve self-stabilizing control of vehicles and enable certain control effects for the trajectory tracking of vehicles. The GHRC solves the problems of low tracking accuracy and poor stability of DHDC and TTHDC. Compared with the sliding mode controller (SMC) and linear quadratic regulator (LQR) controller, the GHRC can reduce the lateral error by 84.44% and the root mean square error (RMSE) by 83.92%, which effectively improves the accuracy and robustness of vehicle-trajectory tracking.

An RFID Tag Movement Trajectory Tracking Method Based on Multiple RF Characteristics for Electronic Vehicle Identification ITS Applications.

Intelligent transportation systems (ITS) urgently need to realize vehicle identification, dynamic monitoring, and traffic flow monitoring under high-speed motion conditions. Vehicle tracking based on radio frequency identification (RFID) and electronic vehicle identification (EVI) can obtain continuous observation data for a long period of time, and the acquisition accuracy is relatively high, which is conducive to the discovery of rules. The data can provide key information for urban traffic decision-making research. In this paper, an RFID tag motion trajectory tracking method based on RF multiple features for ITS is proposed to analyze the movement trajectory of vehicles at important checkpoints. The method analyzes the accurate relationship between the RSSI, phase differences, and driving distances of the tag. It utilizes the information weight method to obtain the weights of multiple RF characteristics at different distances. Then, it calculates the center point of the common area where the vehicle may move under multi-antenna conditions, confirming the actual position of the vehicle. The experimental results show that the average positioning error of moving RFID tags based on dual-frequency signal phase differences and RSSI is less than 17 cm. This method can provide real-time, high-precision vehicle positioning and trajectory tracking solutions for ITS application scenarios such as parking guidance, unmanned vehicle route monitoring, and vehicle lane change detection.

Parameter-Free State Estimation Based on Kalman Filter with Attention Learning for GPS Tracking in Autonomous Driving System.

GPS-based maneuvering target localization and tracking is a crucial aspect of autonomous driving and is widely used in navigation, transportation, autonomous vehicles, and other fields.The classical tracking approach employs a Kalman filter with precise system parameters to estimate the state. However, it is difficult to model their uncertainty because of the complex motion of maneuvering targets and the unknown sensor characteristics. Furthermore, GPS data often involve unknown color noise, making it challenging to obtain accurate system parameters, which can degrade the performance of the classical methods. To address these issues, we present a state estimation method based on the Kalman filter that does not require predefined parameters but instead uses attention learning. We use a transformer encoder with a long short-term memory (LSTM) network to extract dynamic characteristics, and estimate the system model parameters online using the expectation maximization (EM) algorithm, based on the output of the attention learning module. Finally, the Kalman filter computes the dynamic state estimates using the parameters of the learned system, dynamics, and measurement characteristics. Based on GPS simulation data and the Geolife Beijing vehicle GPS trajectory dataset, the experimental results demonstrated that our method outperformed classical and pure model-free network estimation approaches in estimation accuracy, providing an effective solution for practical maneuvering-target tracking applications.

Trajectory Tracking Control of Transformer Inspection Robot Using Distributed Model Predictive Control.

To overcome the difficulty in tracking the trajectory of an inspection robot inside a transformer, this paper proposes a distributed model predictive control method. First, the kinematics and dynamics models of a robot in transformer oil are established based on the Lagrange equation. Then, by using the nonlinear model predictive control method and following the distributed control theory, the motion of a robot in transformer oil is decoupled into five independent subsystems. Based on this, a distributed model predictive control (DMPC) method is then developed. Finally, the simulation results indicate that a robot motion control system based on DMPC achieves high tracking accuracy and robustness with reduced computing complexity, and it provides an effective solution for the motion control of robots in narrow environments.

Real-Time Ocean Current Compensation for AUV Trajectory Tracking Control Using a Meta-Learning and Self-Adaptation Hybrid Approach.

Autonomous underwater vehicles (AUVs) may deviate from their predetermined trajectory in underwater currents due to the complex effects of hydrodynamics on their maneuverability. Model-based control methods are commonly employed to address this problem, but they suffer from issues related to the time-variability of parameters and the inaccuracy of mathematical models. To improve these, a meta-learning and self-adaptation hybrid approach is proposed in this paper to enable an underwater robot to adapt to ocean currents. Instead of using a traditional complex mathematical model, a deep neural network (DNN) serving as the basis function is trained to learn a high-order hydrodynamic model offline; then, a set of linear coefficients is adjusted dynamically by an adaptive law online. By conjoining these two strategies for real-time thrust compensation, the proposed method leverages the potent representational capacity of DNN along with the rapid response of adaptive control. This combination achieves a significant enhancement in tracking performance compared to alternative controllers, as observed in simulations. These findings substantiate that the AUV can adeptly adapt to new speeds of ocean currents.

Research on Trajectory-Tracking Control System of Tracked Wall-Climbing Robots.

Different from the vehicles and robots that move on the ground, complex and nonlinear track-wall interactions bring considerable difficulties to the accurate control of tracked wall-climbing robots due to the effect of gravity and adsorption. In this article, the authors propose a trajectory-tracking control system for tracked wall-climbing robots based on the fuzzy logic computed-torque control (FLCT) method. A key element in the proposed control strategy is to consider the adsorption force and gravity compensation based on the dynamic model. Validated via numerical simulations and experiments, the results show that the proposed controller can track the reference trajectory quickly, accurately and stably.

Design of A Finite-Time Adaptive Controller for Image-Based Uncalibrated Visual Servo Systems with Uncertainties in Robot and Camera Models.

Aiming at the time-varying uncertainties of robot and camera models in IBUVS (image-based uncalibrated visual servo) systems, a finite-time adaptive controller is proposed based on the depth-independent Jacobian matrix. Firstly, the adaptive law of depth parameters, kinematic parameters, and dynamic parameters is proposed for the uncertainty of a robot model and a camera model. Secondly, a finite-time adaptive controller is designed by using a nonlinear proportional differential plus a dynamic feedforward compensation structure. By applying a continuous non-smooth nonlinear function to the feedback error, the control quality of the closed-loop system is improved, and the desired trajectory of the image is tracked in finite time. Finally, using the Lyapunov stability theory and the finite-time stability theory, the global finite-time stability of the closed-loop system is proven. The experimental results show that the proposed controller can not only adapt to the changes in the EIH and ETH visual configurations but also adapt to the changes in the relative pose of feature points and the camera's relative pose parameters. At the same time, the convergence rate near the equilibrium point is improved, and the controller has good dynamic stability.

Fast Trajectory Tracking Control Algorithm for Autonomous Vehicles Based on the Alternating Direction Multiplier Method (ADMM) to the Receding Optimization of Model Predictive Control (MPC).

In order to improve the real-time performance of the trajectory tracking of autonomous vehicles, this paper applies the alternating direction multiplier method (ADMM) to the receding optimization of model predictive control (MPC), which improves the computational speed of the algorithm. Based on the vehicle dynamics model, the output equation of the autonomous vehicle trajectory tracking control system is constructed, and the auxiliary variable and the dual variable are introduced. The quadratic programming problem transformed from the MPC and the vehicle dynamics constraints are rewritten into the solution of the ADMM form, and a decreasing penalty factor is used during the solution process. The simulation verification is carried out through the joint simulation platform of Simulink and Carsim. The results show that, compared with the active set method (ASM) and the interior point method (IPM), the algorithm proposed in this paper can not only improve the accuracy of trajectory tracking, but also exhibits good real-time performance in different prediction time domains and control time domains. When the prediction time domain increases, the calculation time shows no significant difference. This verifies the effectiveness of the ADMM in improving the real-time performance of MPC.

Research on a Cooperative Adaptive Cruise Control (CACC) Algorithm Based on Frenet Frame with Lateral and Longitudinal Directions.

Research on the cooperative adaptive cruise control (CACC) algorithm is primarily concerned with the longitudinal control of straight scenes. In contrast, the lateral control involved in certain traffic scenes such as lane changing or turning has rarely been studied. In this paper, we propose an adaptive cooperative cruise control (CACC) algorithm that is based on the Frenet frame. The algorithm decouples vehicle motion from complex motion in two dimensions to simple motion in one dimension, which can simplify the controller design and improve solution efficiency. First, the vehicle dynamics model is established based on the Frenet frame. Through a projection transformation of the vehicles in the platoon, the movement state of the vehicles is decomposed into the longitudinal direction along the reference trajectory and the lateral direction away from the reference trajectory. The second is the design of the longitudinal control law and the lateral control law. In the longitudinal control, vehicles are guaranteed to track the front vehicle and leader by satisfying the exponential convergence condition, and the tracking weight is balanced by a sigmoid function. Laterally, the nonlinear group dynamics equation is converted to a standard chain equation, and the Lyapunov method is used in the design of the control algorithm to ensure that the vehicles in the platoon follow the reference trajectory. The proposed control algorithm is finally verified through simulation, and validation results prove the effectiveness of the proposed algorithm.

Trajectory Tracking Coordinated Control of 4WID-4WIS Electric Vehicle Considering Energy Consumption Economy Based on Pose Sensors.

In order to improve the stability and economy of 4WID-4WIS (four-wheel independent drive-four-wheel independent steering) electric vehicles in trajectory tracking, this paper proposes a trajectory tracking coordinated control strategy considering energy consumption economy. First, a hierarchical chassis coordinated control architecture is designed, which includes target planning layer, and coordinated control layer. Then, the trajectory tracking control is decoupled based on the decentralized control structure. Expert PID and Model Predictive Control (MPC) are employed to realize longitudinal velocity tracking and lateral path tracking, respectively, which calculate generalized forces and moments. In addition, with the objective of optimal overall efficiency, the optimal torque distribution for each wheel is achieved using the Mutant Particle Swarm Optimization (MPSO) algorithm. Additionally, the modified Ackermann theory is used to distribute wheel angles. Finally, the control strategy is simulated and verified using Simulink. Comparing the control results of the average distribution strategy and the wheel load distribution strategy, it can be concluded that the proposed coordinated control not only provides good trajectory tracking but also greatly improves the overall efficiency of the motor operating points, which enhances the energy economy and realizes the multi-objective coordinated control of the chassis.