Vertebral fracture severity assessment on anteroposterior radiographs with a new semi-quantitative technique.

We developed a new tool to assess the severity of osteoporotic vertebral fracture using radiographs of the spine. Our technique can be used in patient care by helping to stratify patients with osteoporotic vertebral fractures into appropriate treatment pathways. It can also be used for research purposes. PURPOSE: The aim of our study was to propose a semi-quantitative (SQ) grading scheme for osteoporotic vertebral fracture (OVF) on anteroposterior (AP) radiographs. METHODS: On AP radiographs, the vertebrae are divided into right and left halves, which are graded (A) vertical rectangle, (B) square, (C) traverse rectangle, and (D) trapezoid; whole vertebrae are graded (E) transverse band or (F) bow-tie. Type A and B were compared with normal and Genant SQ grade 1 OVF, Type C and D with grade 2 OVF, and Type E and F with grade 3 OVF. Spine AP radiographs and lateral radiographs of 50 females were assessed by AP radiographs SQ grading. After training, an experienced board-certified radiologist and a radiology trainee assessed the 50 AP radiographs. RESULTS: The height-to-width ratio of the half vertebrae varied 1.32-1.48. On lateral radiographs, 84 vertebrae of the 50 patients had OVFs (38 grade 1, 24 grade 2, and 22 grade 3). On AP radiographs, the radiologist correctly assigned 84.2%, 91.7%, and 77.2% and the trainee correctly assigned 68.4%, 79.2%, and 81.8% of grade 1, 2, and 3 OVFs, respectively. Compared with lateral radiographs, the radiologist had a weighted Kappa of 0.944 including normal vertebrae and 0.883 not including normal vertebrae, while the corresponding Kappa values for the trainee were 0.891 and 0.830, respectively. CONCLUSION: We propose a new semi-quantitative grading system for vertebral fracture severity assessment on AP spine radiographs.

External validation of a convolutional neural network algorithm for opportunistically detecting vertebral fractures in routine CT scans.

The Convolutional Neural Network algorithm achieved a sensitivity of 94% and specificity of 93% in identifying scans with vertebral fractures (VFs). The external validation results suggest that the algorithm provides an opportunity to aid radiologists with the early identification of VFs in routine CT scans of abdomen and chest. PURPOSE: To evaluate the performance of a previously trained Convolutional Neural Network (CNN) model to automatically detect vertebral fractures (VFs) in CT scans in an external validation cohort. METHODS: Two Chinese studies and clinical data were used to retrospectively select CT scans of the chest, abdomen and thoracolumbar spine in men and women aged ≥50 years. The CT scans were assessed using the semiquantitative (SQ) Genant classification for prevalent VFs in a process blinded to clinical information. The performance of the CNN model was evaluated against reference standard readings by the area under the receiver operating characteristics curve (AUROC), accuracy, Cohen's kappa, sensitivity, and specificity. RESULTS: A total of 4,810 subjects were included, with a median age of 62 years (IQR 56-67), of which 2,654 (55.2%) were females. The scans were acquired between January 2013 and January 2019 on 16 different CT scanners from three different manufacturers. 2,773 (57.7%) were abdominal CTs. A total of 628 scans (13.1%) had ≥1 VF (grade 2-3), representing 899 fractured vertebrae out of a total of 48,584 (1.9%) visualized vertebral bodies. The CNN's performance in identifying scans with ≥1 moderate or severe fractures achieved an AUROC of 0.94 (95% CI: 0.93-0.95), accuracy of 93% (95% CI: 93%-94%), kappa of 0.75 (95% CI: 0.72-0.77), a sensitivity of 94% (95% CI: 92-96%) and a specificity of 93% (95% CI: 93-94%). CONCLUSION: The algorithm demonstrated excellent performance in the identification of vertebral fractures in a cohort of chest and abdominal CT scans of Chinese patients ≥50 years.

Simulative investigation of the required level of geometrical individualization of the lumbar spines to predict fractures.

Injury mechanisms of the lumbar spine under dynamic loading are dependent on spine curvature and anatomical variation. Impact simulation with finite element (FE) models can assist the reconstruction and prediction of injuries. The objective of this study was to determine which level of individualization of a baseline FE lumbar spine model is necessary to replicate experimental responses and fracture locations in a dynamic experiment.Experimental X-rays from 26 dynamic drop tower tests were used to create three configurations of a lumbar spine model (T12 to L5): baseline, with aligned vertebrae (positioned), and with aligned and morphed vertebrae (morphed). Each model was simulated with the corresponding loading and boundary conditions from dynamic lumbar spine experiments. Force, moment, and kinematic responses were compared to the experimental data. Cosine similarity was computed to assess how well simulation responses match the experimental data. The pressure distribution within the vertebrae was used to compare fracture risk and fracture location between the different models.The positioned models replicated the injured spinal level and the fracture patterns quite well, though the morphed models provided slightly more accuracy. However, for impact reconstruction or injury prediction, the authors recommend pure positioning for whole-body models, as the gain in accuracy was relatively small, while the morphing modifications of the model require considerably higher efforts. These results improve the understanding of the application of human body models to investigate lumbar injury mechanisms with FE models.

Measurement of distances and locations of thoracic and lumbar vertebral bodies from CT scans in cases of spinal deformation.

BACKGROUND: Spinal deformations, except for acute injuries, are among the most frequent reasons for visiting an orthopaedic specialist and musculoskeletal treatment in adults and adolescents. Data on the morphology and anatomical structures of the spine are therefore of interest to orthopaedics, physicians, and medical scientists alike, in the broad field from diagnosis to therapy and in research. METHODS: Along the course of developing supplementary methods that do not require the use of ionizing radiation in the assessment of scoliosis, twenty CT scans from females and males with various severity of spinal deformations and body shape have been analysed with respect to the transverse distances between the vertebral body and the spinous process end tip and the skin, respectively, at thoracic and lumbar vertebral levels. Further, the locations of the vertebral bodies have been analysed in relation to the patient's individual body shape and shown together with those from other patients by normalization to the area encompassed by the transverse body contour. RESULTS: While the transverse distance from the vertebral body to the skin varies between patients, the distances from the vertebral body to the spinous processes end tips tend to be rather similar across different patients of the same gender. Tables list the arithmetic mean distances for all thoracic and lumbar vertebral levels and for different regions upon grouping into mild, medium, and strong spinal deformation and according to the range of spinal deformation. CONCLUSIONS: The distances, the clustering of the locations of the vertebral bodies as a function of the vertebral level, and the trends therein could in the future be used in context with biomechanical modeling of a patient's individual spinal deformation in scoliosis assessment using 3D body scanner images during follow-up examinations.

Isolated vertebral bone infarction following lumbar artery embolization- a case report.

PURPOSE: To report a rare case of isolated lumbar vertebral body infarction following lumbar artery embolization for suspected retroperitoneal haemorrhage. METHODS: We present the case of a 75-year-old male who underwent lumbar artery embolization due to a suspected retroperitoneal haemorrhage post-surgery. Magnetic resonance imaging (MRI) was performed to monitor post-embolization severe lumbar pain. RESULTS: Initial MRI two days post-embolization showed no osseous signal changes or epidural abscess. A subsequent MRI 26 days post-embolization was performed because of increasing lumbar back pain and it revealed a new bone infarction at the L3 vertebral body. CT showed embolization deposits within the vertebral body, not present before the procedure. CONCLUSION: This unique case underscores the importance of considering vertebral body infarction as a potential complication following lumbar artery embolization. MRI was critical in early detection of the bone infarction, while CT confirmed the presence of embolization material. Awareness of this rare complication is crucial for prompt diagnosis and management.

Clinical outcome after dorso-ventral stabilization of the thoracolumbar and lumbar spine with vertebral body replacement and dorsal stabilization.

PURPOSE: Surgical stabilization of the spine by vertebral body replacement (VBR) is used for spinal disorders such as traumatic fractures to provide an anatomical re-adjustment of the spine to prevent late detrimental effects and pain [1-4]. This study addresses the clinical outcome after a ventral intervention with VBR and bisegmental fusion. METHODS: The study includes 76 patients (mean age: 59.34 ± 15.97; 34 females and 42 males) with fractures in the lower thoracic and lumbar spine. They were selected from patients of our hospital who received an anterolateral VBR surgery on the corresponding lower spine region over a nine-year period. Only patients were examined with X-rays and complete follow-up records. Exclusion criteria were changes due to degeneration and pathological fractures. Patients were divided into two groups, the thoracotomy group (Th10-L1) and the lumbotomy group (L2-5), respectively. Minimum one year after surgery, patients were asked about their well-being using a precasted questionnaire. RESULTS: No significant differences with respect to the subjective impression of the patients concerning their back pain, spinal functional impairment, their general functional status and their quality of life impairment. Unfortunately, however, only a rather modest but significant increase of the post-surgical life quality was reported. CONCLUSIONS: Patients who underwent VBR in the lower thoracic or lumbar spine show modest long-term well-being. The results suggest that injuries to the lower thoracic or lumbar spine requiring vertebral body replacement should be classified as severe injuries since they adversely affect the patients' long-term well-being. TRIAL REGISTRATION: Study of clinical outcome of patients after vertebral body replacement of the ventral thoracal and lumbal spine, DRKS00031452. Registered 10th March 2023 - Prospectively registered. Trial registration number DRKS00031452.

A multibody simulation of the spine for objectification of biomechanical quantities after VBT: a proof of concept and description of baseline data.

PURPOSE: Vertebral Body Tethering (VBT), an alternative treatment for adolescent idiopathic scoliosis, shows satisfactory post-operative results. However, the biomechanical quantities and consequences after VBT surgery remain largely unknown. Therefore, the aim of this study is to analyze the spinal biomechanics during different motions using a multibody simulation approach. METHODS: The tether and intervertebral compression forces were simulated in a validated spine model during different physiological movements at different pre-tensions and screw positions, while considering the anatomical muscle and ligament properties. RESULTS: The simulations showed that an augmentation of the pre-tension and an alteration of the screw position have both significant impact on the intervertebral compression and tether forces. The forces also vary depending on the movement performed, with the highest tether forces measured during lateral bending. In the upright position, with a pre-tension of 200 N, the maximum compression force increases by up to 157% compared to the untethered maximum compression force. The screw position can lead to large differences in the distribution of forces in the spine. CONCLUSION: The biomechanical data provide a first impression of the forces that occur along the spine during various physiological movements and are consistent with published clinical data. Forces are not evenly distributed along the spine, with higher lumbar forces. The tether forces reach values during lateral bending that can potentially destroy the tether´s integrity and thus may explain the common post-operative complication, namely tether breakage. The results of the model can therefore have an impact on future directions for improved surgical VBT treatment.

Delayed hemothorax after anterior vertebral body tethering in adolescent idiopathic scoliosis: a case report.

PURPOSE: The aim of this case report is to report that delayed hemothorax is possible after anterior vertebral body tethering (aVBT) and to illustrate the course of treatment. METHODS: We present a 15-year-old boy with adolescent idiopathic scoliosis who underwent an anterior thoracoscopic assisted vertebral body tethering who developed a massive right-sided hemothorax 12 days post-operatively. A chest tube was placed to drain the hemothorax and later required embolectomy with tissue plasminogen activator (TPA) to drain the retained hemothorax. RESULTS: At 1 month follow up post discharge the patient was asymptomatic, and radiograph did not demonstrate evidence of residual hemothorax and scoliosis. We have followed this patient for 5 years postoperative and he continues to do well clinically and radiographically. CONCLUSIONS: Pulmonary complications are a known drawback of anterior thoracoscopic spinal instrumentation. Delayed hemothorax is possible after aVBT. In the case of a retained hemothorax, chest tube treatment with TPA is a safe and effective method of embolectomy.

Bilateral vertebral body tethering: identifying key factors associated with successful outcomes.

PURPOSE: The treatment of operative double major pediatric spinal deformities (e.g., Lenke 3 or 6) with bilateral vertebral body tethering (VBT) can be significantly more challenging when compared to other deformity patterns (e.g., Lenke 1) or treatment with a posterior spinal fusion. We aimed to identify preoperative and perioperative characteristics that were associated with successful postoperative outcomes in patients treated with both a thoracic and thoracolumbar (e.g., bilateral) tether. METHODS: We retrospectively assessed radiographic and clinical data from patients enrolled in a large multi-center study who had a minimum postoperative follow-up of two years. Standard radiographic parameters were extracted from standing spine and left hand-wrist radiographs at various timepoints. We classified patients based on their preoperative deformity pattern (Primary Thoracic [TP] vs. Primary Thoracolumbar [TLP]) and assessed: (1) deformity balance, (2) tilt of the transitional vertebra, and (3) postoperative success. RESULTS: We analyzed data from thirty-six patients (TP: 19 and TLP: 17). We observed no relationship between deformity balance at first erect and postoperative success (p = 0.354). Patients with a horizontal transitional vertebra at first erect were significantly (p = 0.001) more likely to exhibit a successful outcome when compared to those who exhibited a tilted transitional vertebra (83% vs. 62%). Patients who had TLP were also more likely to exhibit a successful outcome when compared to patients who exhibited TP (76% vs. 50%). CONCLUSION: These data indicate that double major deformities can be successfully treated with VBT, particularly for those who exhibit TLP.

Are the facet joint parameters risk factors for cage subsidence after TLIF in patients with lumbar degenerative spondylolisthesis?

PURPOSE: To assess whether preoperative facet joint parameters in patients with degenerative lumbar spondylolisthesis (DS) are risk factors for cage subsidence (CS) following transforaminal lumbar interbody fusion (TLIF). METHODS: We enrolled 112 patients with L4-5 DS who underwent TLIF and were followed up for > 1 year. Preoperative demographic characteristics, functional areas of paraspinal muscles and psoas major muscles (PS), total functional area relative to vertebral body area, functional cross-sectional area (FCSA) of PS and lumbar spine extensor muscles, normalized FCSA of PS to the vertebral body area (FCSA/VBA), lumbar indentation value, facet joint orientation, facet joint tropism (FT), cross-sectional area of the superior articular process (SAPA), intervertebral height index, vertebral Hounsfield unit (HU) value, lordosis distribution index, t-scores, sagittal plane parameters, visual analog scale (VAS) for low back pain, VAS for leg pain, Oswestry disability index, global alignment and proportion score and European quality of life-5 dimensions (EQ-5D) were assessed. RESULTS: Postoperative CS showed significant correlations with preoperative FO(L3-4), FT (L3 and L5), SAPA(L3-5), L5-HU, FCSA/VBA(L3-4), Pre- T-score, post-6-month VAS for back pain and EQ-5D scores among other factors. According to ROC curve analysis, the optimal decision points for FO(L3-4), L3-SAPA, FCSA/VBA(L3-4), L5-HU, and Pre- T-score were 35.88°, 43.76°,114.93, 1.73, 1.55, 136, and - 2.49. CONCLUSIONS: This study identified preoperative FO, SAPA, preoperative CT, Pre- T-score and the FCSA/VBA as independent risk factors for CS after TLIF for DS. These risk factors should enable spinal surgeons to closely monitor and prevent the occurrence of CS.

Flexible posterior vertebral tethering for the management of Scheuermann's kyphosis: correction by using growth modulation-clinical and radiographic outcomes of the first 10 patients with at least 3 years of follow-up.

PURPOSE: The present prospective cohort study was intended to present the minimum 3 years' results of flexible posterior vertebral tethering (PVT) applied to 10 skeletally immature patients with SK to question, if it could be an alternative to fusion. METHODS: Ten skeletally immature patients with radiographically confirmed SK, who had flexible (minimum 35%) kyphotic curves (T2-T12), were included. A decision to proceed with PVT was based on curve progression within the brace, and/or persistent pain, and/or unacceptable cosmetic concerns of the patient/caregivers, and/or non-compliance within the brace. RESULTS: Patients had an average age of 13.1 (range 11-15) and an average follow-up duration of 47.6 months (range 36-60). Posterior vertebral tethering (PVT) was undertaken to all patients by utilizing Wiltse approach and placing monoaxial pedicle screws intermittently. At the final follow-up: mean pre-operative thoracic kyphosis and lumbar lordosis improved from 73.6°-45.7° to 34.7°-32.1°. Mean sagittal vertical axis, vertebral wedge angle and total SRS-22 scores improved significantly. A fulcrum lateral X-ray obtained at the latest follow-up, showed that the tethered levels remained mobile. CONCLUSION: This study, for the first time in the literature, concluded, that as a result of growth modulation applied to skeletally immature patients with SK, flexible PVT was detected to yield gradual correction of the thoracic kyphosis by reverting the pathological vertebral wedging process, while keeping the mobility of the tethered segments in addition to successful clinical-functional results. The successful results of the present study answered the role of the PVT as a viable alternative to fusion in skeletally immature patients with SK. LEVEL OF EVIDENCE: IV.

Finite element analysis of precise puncture vertebral augmentation in the treatment of different types of osteoporotic vertebral compression fractures.

BACKGROUND: Osteoporosis vertebral compression fracture (OVCF) secondary to osteoporosis is a common health problem in the elderly population. Vertebral augmentation (VA) has been widely used as a minimally invasive surgical method. The transpedicle approach is commonly used for VA puncture, but sometimes, it is limited by the anatomy of the vertebral body and can not achieve good surgical results. Therefore, we propose the treatment of OVCF with precise puncture vertebral augmentation (PPVA). This study used finite element analysis to explore the biomechanical properties of PPVA in the treatment of osteoporotic vertebral compression fractures (OVCFs) with wedge, biconcave, and collapse deformities. METHOD: Three-dimensional finite element models of the fractured vertebral body and adjacent superior and inferior vertebral bodies were established using Computed Tomography (CT) data from patients with OVCF, both before and after surgery. Evaluate the stress changes of the wedged deformed vertebral body, biconcave deformed vertebral body, collapsed deformed vertebral body, and adjacent vertebral bodies before and after PPVA. RESULT: In vertebral bodies with wedge deformity and collapsed deformity, PPVA can effectively reduce the stress on the vertebral body but increases the stress on the vertebral body with biconcave deformity. PPVA significantly decreases the stress on the adjacent vertebral bodies of the wedge deformed vertebral body, and decreases the stress on the adjacent superior vertebral body of biconcave deformity and collapsed deformed vertebral bodies, but increases the stress on the adjacent inferior vertebral bodies. PPVA improves the stress distribution of the vertebral body and prevents high-stress areas from being concentrated on one side of the vertebral body. CONCLUSION: PPVA has shown positive surgical outcomes in treating wedge deformed and collapsed deformed vertebral bodies. However, its effectiveness in treating biconcave vertebral body is limited. Furthermore, PPVA has demonstrated favorable results in addressing adjacent superior vertebral body in three types of fractures.

Percutaneous transforaminal endoscopic decompression with removal of the posterosuperior region underneath the slipping vertebral body for lumbar spinal stenosis with degenerative lumbar spondylolisthesis: a retrospective study.

BACKGROUND: Percutaneous transforaminal endoscopic decompression (PTED) is an ideal minimally invasive decompression technique for the treatment of lumbar spinal stenosis (LSS) with degenerative lumbar spondylolisthesis (DLS). The posterosuperior region underneath the slipping vertebral body (PRSVB) formed by DLS is an important factor exacerbating LSS in patients. Therefore, the necessity of removing the PRSVB during ventral decompression remains to be discussed. This study aimed to describe the procedure of PTED combined with the removal of the PRSVB and to evaluate the clinical outcomes. METHODS: LSS with DLS was diagnosed in 44 consecutive patients at our institution from January 2019 to July 2021, and they underwent PTED combined with the removal of the PRSVB. All patients were followed up for at least 12 months. The clinical outcomes were evaluated using the visual analog scale (VAS), Oswestry Disability Index (ODI), and modified MacNab criteria. RESULTS: The mean age of the patients was 69.5 ± 7.1 years. The mean preoperative ODI score, VAS score of the low back, and VAS score of the leg were 68.3 ± 10.8, 5.8 ± 1.0, and 7.7 ± 1.1, respectively, which improved to 18.8 ± 5.0, 1.4 ± 0.8, and 1.6 ± 0.7, respectively, at 12 months postoperatively. The proportion of patients presenting "good" and "excellent" ratings according to the modified MacNab criteria was 93.2%. The percent slippage in spondylolisthesis preoperatively (16.0% ± 3.3%) and at the end of follow-up (15.8% ± 3.3%) did not differ significantly (p>0.05). One patient had a dural tear, and one patient had postoperative dysesthesia. CONCLUSIONS: Increasing the removal of PRSVB during the PTED process may be a beneficial surgical procedure for alleviating clinical symptoms in patients with LSS and DLS. However, long-term follow-up is needed to study clinical effects.

Intravertebral collateral enhancement resembling sclerotic metastatic disease in a case of cervical epidural abscess.

Vertebral body enhancement is occasionally seen on postcontrast CT imaging in the absence of osseous pathology. This enhancement can mimic sclerotic osseous metastatic disease, leading to a diagnostic dilemma for radiologists and increasing the chance of misinterpretation. Existing literature has focused on the association between this enhancement and concomitant central venous system obstruction. We report a 61-year-old woman with a history of nasopharyngeal carcinoma presenting with an epidural abscess who exhibited vertebral body enhancement resembling sclerotic metastatic disease without imaging evidence of central venous obstruction or vertebral osseous metastatic disease. Awareness of this unique presentation may prevent the incorrect diagnostic errors and their associated negative effects on patients.

Vertebral body density role in determining vertebral osteoporotic fracture type and its progression.

Vertebral osteoporotic fractures (VOF) are among the most frequent fractures in the elderly, often leading to an impaired lifestyle and a high economic burden. Although a reduced bone mass density is considered one of the main risk factors for VOF, its role in determining the fracture type, using the AO spine-DGOU classification for osteoporotic thoracolumbar fractures, as well as its progression, is unknown. The current study aimed to: (1) reveal whether the bone density of the vertebral bodies of fractured and non-fractured vertebrae predicts the type of fracture, (2) examine whether bone density is associated with the initial and progressive collapse of the vertebral body, and (3) provide predictive measures for fracture progression. The study sample included 124 patients (40 males and 84 females) with an acute osteoporotic vertebral fracture who underwent a computerized tomography scan at the time of diagnosis and an x-ray at least 3 months later. The bone density of the fractured and adjacent (non-fractured) vertebrae was measured at diagnosis. The magnitude of the collapse and the progression of the fracture over time were calculated from height measurements of the vertebral bodies at diagnosis and follow-up. Age was a significant factor in predicting the fracture type and magnitude of collapse, whereas sex and bone density were not. The severity of the fracture was involved in predicting its progression, demonstrating that severe-type fractures tended to continue to collapse after diagnosis. However, when each type was examined independently, the density of the fractured vertebra had a protective effect on fracture progression. To conclude, identifying the type of fracture is beneficial in determining patient prognosis. Furthermore, the density of the fractured vertebra, the magnitude of collapse, and patient age are valuable predictors of fracture progression.

Prevalence and characteristics of osseous bridging between vertebral bodies in the cervical spine: A skeletal study.

Osseous bridging (OB) in three or more segments of motions (SOMs) of the mobile spine was initially defined as diffuse idiopathic skeletal hyperostosis (DISH), located particularly in the thoracic spine (T-spine). This pathological phenomenon is often characterized by calcification and ossification, which take place simultaneously or separately. The soft tissues, mainly ligaments and entheses, are calcified, with bone formation not originating from the anterior longitudinal ligament (ALL). DISH formation can involve osteophytes, which are created by the ossification process and can involve soft tissue such as the ALL. The ALL can also be calcified. Until recently, the prevalence of DISH in the general population was considered low (0%-5%) and rare in the cervical spine (C-spine). In a cross-sectional observational skeletal study, we investigated the prevalence and location of C-spine OB between vertebral bodies with fewer than three SOMs. We tested a large sample (n = 2779) of C-spines housed in the Cleveland Museum of Natural History (Ohio, USA). The human sources of the samples had died between the years 1912 and 1938 and represented both sexes and two different ethnic groups: Black Americans and White Americans. The process development can be seen on the ALLs as calcification, osteophytosis, and candle-shaped. Among all of the specimens, 139 (5%) were affected by OB, mostly in one SOM. Prevalence tended to be higher in women, White Americans, and the older age group. The levels most affected were C3-C4, followed by C2-C3 and subsequently, C5-C6. OB involving two consecutive SOMs was found only at C5-C7. We believe it is important to respond to the presence of a single SOM with a presumptive diagnosis of OB and to follow up, identify whether the diagnosis is correct, and take preventive action if possible. There is a need for updated diagnostic criteria and research approaches that reflect contemporary lifestyle factors and their impact on spine health.

[Clinical outcomes of 3D-printing stand-alone artificial vertebral body in anterior cervical surgeries].

OBJECTIVE: To explore the short-term outcomes of 3D-printing stand-alone artificial vertebral body (AVB) in the surgical procedure of anterior cervical corpectomy and fusion (ACCF). METHODS: Following the proposal of IDEAL (idea, development, exploration, assessment, and long-term follow-up) framework, we designed and conducted this single-armed, retrospective cohort study. The patients with cervical spondylotic myelopathy were recruited, and these patients exclusively received the surgical procedure of single-level ACCF in our single center. After the process of corpectomy, the size was tailored using different trials and the most suitable stand-alone AVB was then implanted. This AVB was manufactured by the fashion of 3D-printing. Two pairs of screws were inserted in an inclined way into the adjacent vertebral bodies, to stabilize the AVB. The participants were regularly followed-up after the operation. Their clinical data were thoroughly reviewed. We assessed the neurological status according to Japanese Orthopedic Association (JOA) scale. We determined the fusion based on imaging examination six months after the operation. The recorded clinical data were analyzed using specific software and they presented in suitable styles. Paired t test was employed in comparison analysis. RESULTS: In total, there were eleven patients being recruited eventually. The patients were all followed up over six months after the operation. The mean age of the cohort was (57.2±10.2) years. The mean operation time was (76.1±23.1) min and the median bleeding volume was 150 (100, 200) mL. The postoperative course was uneventful for all the cases. Dysphagia, emergent hematoma, and deterioration of neurological function did not occur. Mean JOA scores were 13.2±2.2 before the operation and 16.3±0.8 at the final follow-up, which were significantly different (P < 0.001). The mean recovery rate of neurological function was 85.9%. By comparing the imaging examinations postoperatively and six months after the operation, we found that the average subsidence length was (1.2±1.1) mm, and that there was only one cases (9.1%) of the severe subsidence (>3 mm). We observed significant improvement of cervical lordosis after the operation (P=0.013). All the cases obtained solid fusion. CONCLUSION: 3D-printing stand-alone AVB presented favorable short-term outcome in one-level ACCF in this study. The fusion rate of this zero-profile prosthesis was satisfactory and the complication rate was relatively low.

Effect of electrode attachment location for transcutaneous electrical nerve stimulation for pain relief in lumbar vertebral body fractures.

[Purpose] This study aimed to investigate the effect of the location of electrode attachment in transcutaneous electrical nerve stimulation on pain relief in patients with lumbar vertebral body fractures. [Participants and Methods] This study included 59 patients with lumbar vertebral body fractures, who were randomly assigned to receive transcutaneous electrical nerve stimulation to the lumbar region, lower limbs, or upper limbs, or no treatment, over a 4-week period. Pain, activities of daily living, and pain catastrophizing were assessed. [Results] Compared with the control group, transcutaneous electrical nerve stimulation to the lumbar region or lower limbs significantly reduced pain levels in the first 2 weeks. Although, activities of daily living and pain catastrophizing improved over time, no significant differences were observed between the groups. [Conclusion] Transcutaneous electrical nerve stimulation provides pain relief to patients during the early stages of lumbar vertebral body fractures. However, it had no effect on the activities of daily living, pain catastrophizing, or long-term pain-relief. For lumbar vertebral body fracture pain relief, transcutaneous electrical nerve stimulation electrodes should be attached to the lumbar region or lower limbs.

m2ABQ-a proposed refinement of the modified algorithm-based qualitative classification of osteoporotic vertebral fractures.

Currently, there is no reproducible, widely accepted gold standard to classify osteoporotic vertebral body fractures (OVFs). The purpose of this study is to refine a method with clear rules to classify OVFs for machine learning purposes. The method was found to have moderate interobserver agreement that improved with training. INTRODUCTION: The current methods to classify osteoporotic vertebral body fractures are considered ambiguous; there is no reproducible, accepted gold standard. The purpose of this study is to refine classification methodology by introducing clear, unambiguous rules and a refined flowchart to allow consistent classification of osteoporotic vertebral body fractures. METHODS: We developed a set of rules and refinements that we called m2ABQ to classify vertebrae into five categories. A fracture-enriched database of thoracic and lumbar spine radiographs of patients 65 years of age and older was retrospectively obtained from clinical institutional radiology records using natural language processing. Five raters independently classified each vertebral body using the m2ABQ system. After each annotation round, consensus sessions that included all raters were held to discuss and finalize a consensus annotation for each vertebral body where individual raters' evaluations differed. This process led to further refinement and development of the rules. RESULTS: Each annotation round showed increase in Fleiss kappa both for presence vs absence of fracture 0.62 (0.56-0.68) to 0.70 (0.65-0.75), as well as for the whole m2ABQ scale 0.29 (0.25-0.33) to 0.54 (0.51-0.58). CONCLUSION: The m2ABQ system demonstrates moderate interobserver agreement and practical feasibility for classifying osteoporotic vertebral body fractures. Future studies to compare the method to existing studies are warranted, as well as further development of its use in machine learning purposes.

Biomimetic Inspired Hydrogels for Regenerative Vertebral Body Stenting.

PURPOSE OF REVIEW: This review aims to explore the potential of biomimetic hydrogels as an alternative to bone cement in vertebral body stenting (VBS), a minimally invasive treatment for vertebral compression fractures. RECENT FINDINGS: The use of bone cement in VBS procedures can lead to complications such as incomplete fracture reduction and cement leakage. Biomimetic hydrogels have gained significant attention as potential biomaterial alternatives for VBS due to their unique properties, including tuneable therapeutic and mechanical properties. Over the past decade, there has been significant advancements in the development of biomimetic hydrogels for bone regeneration, employing a wide range of approaches to enhance the structural and functional properties of hydrogels. Biomimetic hydrogels hold significant promise as safer and reparative alternatives to bone cement for VBS procedures. However, further research and development in this field are necessary to explore the full potential of hydrogel-based systems for vertebral bone repair.