Increased soil moisture aggravated the competitive effects of the invasive tree Rhus typhina on the native tree Cotinus coggygria.

BACKGROUND: Invasive exotic species have caused significant problems, and the effects of extreme precipitation and drought, which might occur more frequently under the global climate change scenarios, on interspecific relationship between invasive and native species remain unclear. RESULTS: We conducted a greenhouse experiment with three soil water levels (30-40%, 50-60%, and 70-80% of field capacity) and two cultivation treatments (monoculture pots, one seedling of either species and mixture pots, one seedling of each species) to investigate soil water content effects on the relationship between invasive Rhus typhina and native Cotinus coggygria. Rhus typhina had lower height but bigger crown area than C. coggygria in the monoculture treatment. Rhus typhina had higher height, bigger crown area and total biomass than C. coggygria in the mixture treatment. Drought decreased the growth parameters, total chlorophyll concentration, and leaf biomass, but did not change gas exchange and other biomass parameters in R. typhina. The growth parameters, leaf area index, biomass parameters, total chlorophyll concentration, and net photosynthetic rate of C. coggygria decreased under drought conditions. The log response ratio (lnRR), calculated as ln (total biomass of a target plant grown in monoculture/total biomass of a target plant grown in mixed culture), of R. typhina was lower than that of C. coggygria. The lnRR of R. typhina and C. coggygria decreased and increased with increase in soil water content, respectively. CONCLUSIONS: Rhus typhina has greater capacity to relatively stable growth to the drought condition than C. coggygria and has strong competition advantages in the mixture with C. coggygria, especially in the drought condition. Our study will help understand the causes of invasiveness and wide distribution of R. typhina under various moisture conditions and predict its expansion under climate change scenarios.

Impact of Air Exposure Time on the Water Contact Angles of Daily Disposable Silicone Hydrogels.

The wettability of silicone hydrogel (SiHy) contact lens (CLs) is crucial for the pre-lens tear film stability throughout the day. Therefore, sessile drop and captive bubble setups were used to study the advancing and receding water contact angles (CA) of four SiHy materials: narafilcon A (TE), senofilcon A (AOD), stenfilcon A (MD), and delefilcon A (DT). TE and AOD have 48% and 38% water content, respectively, and no surface coating. MD (54% water) implements "smart chemistry" with just 4.4% bulk silicone content, while DT has >80% water at its surface. These SiHy were subjected to continuous blink-like air exposure (10 s)/rehydration (1s) cycles for 0, 1, 2, 3, 4, 6, 8, 10, 12, 14, and 16 h. The advancing CA, which measures the rehydration propensity of the CL surface, proved to be the most sensitive parameter to discriminate between the samples. The order of performance for the entire time scale was DT > MD >> AOD ≥ TE. The extended desiccation/rehydration cycling increased the differences between the CA of DT and MD compared to AOD and TE. This suggests that the low Si surface content and the high surface hydration are major determinants of SiHy wettability.

Association between dryness sensation and ocular surface temperature and conjunctival blood flow in soft contact lens wearers.

PURPOSE: To investigate the association between dryness, ocular surface temperature (OST), and conjunctival blood flow (CBF) in soft contact lens (SCL) wearers after airflow stimulation. METHODS: After recruiting 21 SCL wearers (mean age, 25.3 ± 4.2 years), subjects used two different daily disposable silicone hydrogel SCLs (narafilcon A and delefilcon A lenses). On three of four measurement days, excluding the first, OST, CBF, tear meniscus height (TMH), and non-invasive tear break-up time (NIBUT) were measured after airflow stimulation at a rate of 3 m/s for 10 min. The measurements were conducted without SCLs on the first and second days, and with different SCLs on the third and fourth days. Dryness was evaluated using the visual analogue scale (VAS). These parameters were compared between the two types of SCLs, and their association with the dryness sensation was then investigated. RESULTS: Dryness was significantly weakly correlated with OST (r = -0.375, p < 0.05) and CBF (r = 0.339, p < 0.05). TMH, NIBUT, and VAS scores for dryness with the delefilcon A lens (0.15 ± 0.05 mm, 3.7 ± 01.7 s and 29.4 ± 16.9) were significantly higher, longer, and lower, respectively, than those with the narafilcon A lens (0.12 ± 0.05 mm, 2.3 ± 1.7 s and 35.9 ± 17.0; p < 0.05, p < 0.01 and p < 0.01). The changes in the OST and CBF between with and without the delefilcon A lens (-0.36 ± 0.35 °C and 0.99 ± 0.19) were significantly small compared to the narafilcon A lens (-0.60 ± 0.42 °C and 1.11 ± 0.21; p < 0.01 for both comparisons). CONCLUSION: Dryness was correlated with OST and CBF, which indicates that when dryness was high, OST was low and CBF was high. These results suggest that OST and CBF assessments are effective for evaluating dryness sensation.

Transects of polycyclic aromatic hydrocarbons and organochlorine pesticides in an urban estuary using passive samplers.

Hydrophobic organic contaminants (HOCs) are tracers of anthropogenic impacts, which can negatively affect water quality. The relative importance of new emissions versus the remobilization of HOCs from legacy reservoirs is not well constrained. Polyethylene passive samplers were deployed in vertical profiles at four sites to determine the concentrations and gradients of atmospheric and freely dissolved polycyclic aromatic hydrocarbons (PAHs) and freely dissolved organochlorinated pesticides (OCPs) in Narragansett Bay, an urban estuary. The concentrations of the sum of 20 PAHs ranged from 4.3 to 240 ng/m3 in the air and 3.2-21 ng/L in the water column, dominated by phenanthrene and pyrene. OCP concentrations varied from below the detection limit to 150 ng/L in the water column. Common OCPs included α-hexachlorocyclohexane, hexachlorobenzene, and aldrin. Gradients displayed net deposition for PAHs, but equilibrium through the water column. Results from this study provided evidence that key OCPs displayed mostly similar concentrations (at or near equilibrium) in the water at both Conimicut Point and Block Island.

Characteristics of Pre-Lens Tear Film Behavior in Eyes Wearing Delefilcon A Silicone Hydrogel Water Gradient Contact Lenses.

The pre-lens tear film (PLTF) over (i) delefilcon A silicone hydrogel water gradient (WG; 33-80% from core to surface) contact lenses (CLs) (SHWG-CLs) and (ii) subjects' own non-WG soft CLs (SCLs) (SO-SCLs) was studied in 30 eyes of 30 subjects to assess the hypothesized PLTF stabilization over SHWG-CLs. In both eyes, delefilcon A SHWG-CLs (DAILIES TOTAL1®; Alcon, Fort Worth, TX, USA) or SO-SCLs were worn. After 15 min of wearing each lens, the tear meniscus radius (TMR, mm), lipid-layer interference grade (IG) and spread grade (SG), and non-invasive breakup time (NIBUT, seconds) were evaluated and compared between the SHWG-CLs and the SO-SCLs. The comparison between the SHWG-CL and SO-SCL groups (SHWG-CL and SO-SCL, mean ± SD) revealed that TMRs temporarily decreased and reached a plateau value after 15 min (0.21 ± 0.06; 0.21 ± 0.06) compared to the value prior to CL insertion (0.24 ± 0.08; 0.25 ± 0.08), with no significant difference between the two groups. The NIBUT, IG, and SG values after 15 min of wearing the CLs were (9.7 ± 3.7; 4.7 ± 4.2), (1.0 ± 0.2; 1.8 ± 1.0), and (1.1 ± 0.4; 1.9 ± 1.5), respectively, and all values were significantly better in the SHWG-CL group (p < 0.0001, p = 0.0039, and p < 0.0001, respectively). We found that compared to the SO-SCLs, the maintenance of the PLTF on the SHWG-CLs was supported by the thicker and more stable PLTF.

Safety and Efficacy of a New Water Gradient Biomimetic Monthly Replacement Spherical Contact Lens Material (Lehfilcon A).

Purpose: The objective of this study was to evaluate the safety and performance of the investigational lens, lehfilcon A, when worn in a daily wear modality and replaced monthly as compared to the commercially available comfilcon A contact lens. Methods: This was a multicenter, prospective, controlled, double-masked, randomized, parallel-group clinical study with bilateral lens wear for 3 months. In all, 115 subjects completed the study (77 with test lehfilcon A and 38 with control comfilcon A contact lenses). Distance visual acuity (VA) was assessed using Snellen VA. Lens performance was assessed by examining lens fit/movement, centration, front surface wettability and front/back surface deposits using slit-lamp biomicroscopy. Results: At the 3-month follow-up visit, all eyes had a distance VA of 20/20 or better. Further, lens fit/movement was assessed as optimal in 92.9% of the eyes with lehfilcon A and 89.2% with comfilcon A. There were no ratings of unacceptably tight or loose fits for either contact lens material. Lens centration was assessed as optimal in 98.7% of eyes with lehfilcon A and 94.6% with comfilcon A. For front and back surface deposits, both materials showed minimal lens surface deposits. Front surface wettability was assessed as grade 0 or 1 for most of the study lenses in both lens groups across all attended study visits. There were no ocular adverse events related to the study lenses. Conclusion: Overall, lehfilcon A showed excellent VA, optimal lens fitting characteristics, a clean surface, high wettability, and low risk for adverse events after 3 months of lens wear.

Human tear proteome dataset in response to daily wear of water gradient contact lens using SWATH-MS approach.

Water Gradient Contact Lens (WGCL) is a new generation material that combines the benefits of Silicone hydrogel (SiHy) and traditional hydrogel contact lenses by modifying the materials between the core and the surface. However, its impact on tear proteome has not been explored. Tears were collected on healthy young adults using Schirmer's strip at baseline, 1-week, and 1-month of WGCL lens wear (n=15) and age-matched untouched controls (n=10). Equal amounts of tears samples from individuals of WGCL and control groups were randomly pooled to form representative equal parts at each condition (n=3 for WGCL wear and age-matched untouched control group) at each condition (baseline, 1-week, and 1-month). Tears were prepared using the S-Trap sample preparation followed by the analysis of a TripleTOF 6600 mass spectrometer. Using Information-dependent acquisition (IDA), a total of 725 tear proteins (6760 distinct peptides) were identified in the constructed spectral library at 1% FDR. Using data-independent acquisition (SWATH-MS), data were analyzed and processed using PeakView (v2.2, SCIEX), with the top differentially expressed proteins at each time point (baseline, 1-week, and 1-month) presented. All acquired raw data (IDA and SWATH-MS) were submitted and published on the Peptide Atlas public repository (http://www.peptideatlas.org/) for general release (Data ID PASS01589).

Relationships between the material properties of silicone hydrogels: Desiccation, wettability and lubricity.

Silicone hydrogels (SiHy), represent composite matrices composed of hydrophobic gas permeable silicone (Si) rich core and a surface enriched with hydrophilic polymer moieties. Their utilization in contact lens design requires number of SiHy properties (hydration, wettability, lubricity) to be optimized for the challenging conditions at the ocular surface. Typical limitations in literature are that (i) these properties are studied in isolation, monitoring only one parameter but not the rest of them, and (ii) measurements are performed with hydrated samples immediately after removal from storage solutions. Here we study the simultaneous evolution of critical material properties (evaporative loss of water, water contact angle, coefficient of friction) of different SiHy subjected to continuous blink-like desiccation/rehydration cycling. SiHy with wetting agents incorporated in their core (narafilcon A, senofilcon A) were particularly susceptible to extended desiccation. Stenfilcon A, a material with only 3% bulk Si content maintained its performance for 4 h of cycling, and delefilcon A (80% surface water content) resisted extended 8 h of desiccation/rehydration runs. Strong correlation exists between the evolution of SiHy wettability and lubricity at ≥4 h of blink-like cycling. Understanding the interplay between SiHy properties bears insights for knowledge based design of novel ophthalmic materials.

Effect of the surface layer on drug release from delefilcon-A (Dailies Total1®) contact lenses.

Contact lenses are receiving significant attention for delivering ophthalmic drugs with higher bioavailability compared to eye drops. Here we explore drug transport from delefilcon-A Dailies Total1® lenses which are designed to have a thin, high-water content layer on the surface. Our goal is to determine the impact of this high water content layer on drug transport for both hydrophobic (dexamethasone and cyclosporine) and hydrophilic (timolol and levofloxacin) drugs. Drugs were loaded into the lens by soaking in aqueous drug solutions till equilibrium, followed by release in phosphate buffered saline. The concentration data during release was fitted to the diffusion equation without considering the surface layer. If fits were poor, the surface layer was include in the model, as a burst release. Results showed that surface layer resulted in a burst release of about 35% of the loaded drug for the two hydrophilic drugs, and the model did not fit the data unless the surface layer was incorporated as a burst release. For the hydrophobic drugs, there was no burst release and the model fitted the data without including the surface layer likely because of the low partition coefficient of the hydrophobic drugs in the surface layer compared to the lens. The results further confirm the presence of the high water content surface layer on the Dailies Total1® lenses. The release profile of the burst release for hydrophilic drugs could be therapeutically useful for antibiotics where a high dose is desirable initially. The effect of vitamin E loading-an established procedure for increasing drug release time in other commercial lenses, was also tested on the release of timolol maleate and levofloxacin. A 20% vitamin E loading was found to increase the release time of timolol and levofloxacin by a factor of 5 and 3-fold respectively, but this increase proved much less effective compared to vitamin E's effect on other commercial silicone hydrogels.