Pterostilbene loaded poly(vinyl alcohol)-gelatin cryogels as potential bioactive wound dressing material.

Cryogels are support materials which are good at mimicking extracellular matrix due to their excellent hydrophilicity, biocompatibility, and macroporous structure, thus they are useful in facilitating cell activities during healing process. In this study, polyvinyl alcohol-gelatin (PVA-Gel) based cryogel membranes loaded with pterostilbene (trans-3,5-dimethoxy-4-hydroxystilbene; PTS) (PVA-Gel/PTS) was synthesized as wound dressing materials. PVA-Gel and PVA-Gel/PTS were synthesized with the polymerization yields of 96% ± 0.23% and 98% ± 0.18%, respectively, and characterized by swelling tests, Brunauer-Emmett-Teller (BET) and scanning electron microscopy (SEM) analysis. The swelling ratios were calculated as 98.6% ± 4.93% and 102% ± 5.1%, macroporosities were determined as 85% ± 2.13% and 88% ± 2.2%, for PVA-Gel and PVA-Gel/PTS, respectively. It was determined that PVA-Gel and PVA-Gel/PTS have 17 m2 /g ± 0.76 m2 /g and 20 m2 /g ± 0.92 m2 /g surface areas, respectively. SEM studies were demonstrated that they have ~100 µm pore sizes. According to 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), trypan blue exclusion and live-dead assay results, it was observed that cell proliferation, cell number and cell viability were higher in PVA-Gel/PTS cryogel at 24, 48, and 72 h compared to PVA-Gel. A strong and transparent fluorescent light intensity was observed indicating higher cell population in PVA-Gel/PTS in comparison with PVA-Gel, according to 4',6-diamidino-2-phenylindole (DAPI) staining. SEM, F-Actin, Giemsa staining and inverted-phase microscope image of fibroblasts in PVA-Gel/PTS cryogels revealed that dense fibroblast proliferation and spindle-shaped morphology of cells were preserved. Moreover, DNA agarose gel data demonstrated that PVA-Gel/PTS cryogels had no effect on DNA integrity. Consequently, produced PVA-Gel/PTS cryogel can be used as wound dressing material to promote wound therapies, inducing cell viability and proliferation.

Agar/κ-carrageenan/montmorillonite nanocomposite hydrogels for wound dressing applications.

In this study, agar/κ-carrageenan/montmorillonite (MMT) hydrogels were prepared to examine their usability as wound dressing materials and to see the effect of MMT amount on some properties of agar/κ-carrageenan hydrogel materials. Hydrogels were characterized by SEM-EDX, TEM and DSC analyses. By increasing the MMT content within hydrogel matrix from 0% to 5%, the decomposition temperature of the hydrogel material was increased from 256.6 °C to 262.1 °C. Swelling amount of hydrogels in d-glucose solution (2682%) was found to be much higher compared with other physiological solutions such as physiological saline solution (937%), synthetic urine solution (746%) and simulated wound fluid (563%). The release studies of analgesic lidocaine hydrochloride (LDC) and antibiotic chloramphenicol (CLP) drugs from hydrogel systems demonstrated that the release amount of LDC and CLP from hydrogels could be controlled by MMT amount within hydrogel matrix. The concentrations of drugs within hydrogel sample stored at 4 °C for 6 months did not exhibit a significant change. Hydrogel materials containing CLP exhibited good antibacterial activity against E. coli and S. aureus. Cytotoxicity test results indicated that hydrogels were biocompatible with MG-63 cells. The ultimate compressive stress of agar/κ-carrageenan hydrogel with LDC and CLP and agar/κ-carrageenan/MMT hydrogel including 5% MMT with LDC and CLP was measured as 38.30 kPa and 47.70 kPa, respectively. The experimental results revealed that prepared agar/κ-carrageenan and agar/κ-carrageenan/MMT hydrogels have great potential for wound care applications.

In Situ Forming and H2O2-Releasing Hydrogels for Treatment of Drug-Resistant Bacterial Infections.

Various types of commercialized wound dressings (e.g., films, foams, gels, and nanofiber meshes) have been clinically used as a physical barrier against bacterial invasion and as wound-healing materials. Although these dressings can protect the wounded tissue from the external environment, they cannot treat the wounds that are already infected with bacteria. Herein, we report in situ H2O2-releasing hydrogels as an active wound dressing with antibacterial properties for treatment of drug-resistant bacterial infection. In this study, H2O2 was used for two major purposes: (1) in situ gel formation via a horseradish peroxidase (HRP)/H2O2-triggered cross-linking reaction, and (2) antibacterial activity of the hydrogel via its oxidative effects. We found that there were residual H2O2 in the matrix after in situ HRP-catalyzed gelling, and varying the feed amount of H2O2 (1-10 mM; used to make hydrogels) enabled control of H2O2 release kinetics within a range of 2-509 µM. In addition, although the gelatin-hydroxyphenyl propionic acid (GH) gel called "GH 10" (showing the greatest H2O2 release, 509 µM) slightly decreased cell viability (to 82-84%) of keratinocyte (HaCaT) and fibroblast (L-929) cells in in vitro assays, none of the hydrogels showed significant cytotoxicity toward tissues in in vivo skin irritation tests. When the H2O2-releasing hydrogels that promote in vivo wound healing, were applied to various bacterial strains in vitro and ex vivo, they showed strong killing efficiency toward Gram-positive bacteria including Staphylococcus aureus, S. epidermidis, and clinical isolate of methicillin-resistant S. aureus (MRSA, drug-resistant bacteria), where the antimicrobial effect was dependent on the concentration of the H2O2 released. The present study suggests that our hydrogels have great potential as an injectable/sprayable antimicrobial dressing with biocompatibility and antibacterial activity against drug-resistant bacteria including MRSA for wound and infection treatment.

Development of hydrocolloid Bi-layer dressing with bio-adhesive and non-adhesive properties.

Bio-active bi-layer thin film having both bio-adhesive and non-adhesive end composed of polyvinyl alcohol (PVA) and gelatin/chitosan/polyethylene glycol (PEG) blend was developed for biomedical applications especially as an alternative of advanced tissue scaffold. The developed composite film was subjected to mechanical, thermal and physico-chemical characterization such as tensile strength (TS) and elongation at break (Eb), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), fluid drainage capacity and biocompatibility. Suitable packaging was also selected and stability study and aging test of the composite film were performed after packing. The incorporation of chitosan and PEG into gelatin showed improved mechanical properties of both TS and Eb, which suggested the occurrence of interaction among gelatin, chitosan and PEG molecules in the composite film. The presence of crosslinking as an interaction of above three polymers was also confirmed by FTIR study. Results from the DSC study suggested increased thermal stability after crosslinking. On the other hand, water uptake studies suggested excellent fluid drainage capability and hydro-stability of the composite film. The proposed dressing also showed excellent biocompatibility. Based on the studies related to the performance with confirmed identity, we concluded that our developed bi-layer film is very potential as an ideal wound dressing material.