Sensitive detection of proteins in polyacrylamide gel via isatoic anhydride derivatization: Introduction of a low-cost fluorescent prelabeling procedure.

Here, we introduce isatoic anhydride as a sensitive and commodious fluorescent prelabel for detection of proteins in one-dimensional polyacrylamide gels. High reactivity of isatoic anhydride with nucleophiles in mild alkaline environments makes it an appropriate tag for labeling of biomolecules. In this study, we show that preelectrophoresis labeling of proteins with isatoic anhydride for few minutes at room temperature allows detection of 2-4 ng of standard proteins, BSA and lysozyme, per band. Proteins were successfully labeled in the presence of a wide range of common biological reagents and in crude cell extract. The labeled proteins have the same electrophoretic migration in comparison to unlabeled proteins; however the application of saturation labeling method results in slight band broadening. Compatibility of the method with downstream processes was assessed by tryptic digestion of labeled proteins and study of peptide mixture using gel electrophoresis which revealed partial digestion of labeled proteins due to lysine modification. The present procedure is sensitive, rapid, and inexpensive and is a promising alternative for current protein staining procedures, where downstream processes are not desired.

Cost-effective and efficient apparatus for electroelution of micro- and macrogram quantities of proteins from polyacrylamide gels.

Protein recovery from gel electrophoresis plays a significant role in functional genomics and proteomics. To assist in this, a simple, cost-effective, and efficient apparatus for electroelution of proteins has been designed. The performance of the apparatus was demonstrated using the proteins bovine serum albumin (BSA), phosphorylase, ovalbumin, pepsin, and trypsinogen. In all the cases the yield of elution was found to be consistently greater than 85% and the proteins could be eluted without degradation in less than 15 min. The utility of this method can be extended to protein elution from denatured and native polyacrylamide gels, DNA purification from agarose gels, and oligomeric primers purification from polyacrylamide gels. In addition to this, the method offers an effortless purification and characterization of microbial extracellular proteins. The eluted proteins can be directly used in N-terminal amino acid sequencing, and in amino acid and proteomics analyses.

Electroelution of nucleic acids from polyacrylamide gels: a custom-made, agarose-based electroeluter.

Polyacrylamide electrophoresis is routinely used for small-scale preparative and analytical separations. The incomparably high-resolution separations achieved by this technique, however, have not been widely exploited to the large-scale preparative isolation of biological molecules from contaminants, mainly because of difficulties in the recovery of the desired molecule from the gel matrix. Electroelution is an effective procedure applied for this purpose. However, commercially available, high-cost electroeluters are required for achieving high recovery yields. Here, we describe a custom-made electroeluter that combines low-cost, high-recovery yields, short times of electroelution, and convenience in the manipulation of sensitive samples.

Development of buffers for fast semidry transfer of proteins.

Western blot is an extensively used method for protein detection in cell biology. To optimize this procedure, here we examined a panel of buffers for their ability to efficiently transfer proteins from SDS-polyacrylamide gels onto nitrocellulose membranes in a short 12-min period, designated here as fast semidry transfer. Our results show for the first time that HEPES- and HEPPS/EPPS-based buffers represent the most efficient buffers for fast semidry transfer.

Use of polyacrylamide gel moving boundary electrophoresis to enable low-power protein analysis in a compact microdevice.

In designing a protein electrophoresis platform composed of a single-inlet, single-outlet microchannel powered solely by voltage control (no pumps, values, injectors), we adapted the original protein electrophoresis format-moving boundary electrophoresis (MBE)-to a high-performance, compact microfluidic format. Key to the microfluidic adaptation is minimization of injection dispersion during sample injection. To reduce injection dispersion, we utilize a photopatterned free-solution-polyacrylamide gel (PAG) stacking interface at the head of the MBE microchannel. The nanoporous PAG molecular sieve physically induces a mobility shift that acts to enrich and sharpen protein fronts as proteins enter the microchannel. Various PAG configurations are characterized, with injection dispersion reduced by up to 85%. When employed for analysis of a model protein sample, microfluidic PAG MBE baseline-resolved species in 5 s and in a separation distance of less than 1 mm. PAG MBE thus demonstrates electrophoretic assays with minimal interfacing and sample handling, while maintaining separation performance. Owing to the short separation lengths needed in PAG MBE, we reduced the separation channel length to demonstrate an electrophoretic immunoassay powered with an off-the-shelf 9 V battery. The electrophoretic immunoassay consumed less than 3 µW of power and was completed in 30 s. To our knowledge, this is the lowest voltage and lowest power electrophoretic protein separation reported. Looking forward, we see the low-power PAG MBE as a basis for highly multiplexed protein separations (mobility shift screening assays) as well as for portable low-power diagnostic assays.

A rapid and simplified method for protein silver staining in polyacrylamide gels.

Silver staining is widely used to detect protein in polyacrylamide gels when high sensitivity is required. A simple and rapid protocol for silver staining of proteins following PAGE was developed in the present study. The number of steps was reduced compared to conventional protocol by combining fixing, rinsing, and soaking into a single impregnating step, thus achieving detection of proteins in 20 min. The present method is as sensitive as current protocols with the advantage of saving time and costs.

A coordination complex system for generic, ultrafast, and sensitive multimode fluorescent staining of biomolecules.

Gel electrophoresis staining methodologies documented thus far are largely utilized in a biomolecule context-dependent manner. We report herein the development of a generic, ultrafast, and sensitive multimode fluorescent system for the efficient identification of DNA, RNA, and proteins. Interaction between a positively charged, planar ligand-based coordination complex with partner biomolecule leads to aggregation-induced fluorescence quenching and allows for the image contrast generation within one minute. Alternatively, successive reactions of the biomolecule-loaded gel with cation and ligand, in either order of sequence, provide an equally effective staining efficacy. Image contrast reversal is accomplished through a facile washing or photobleaching procedure. The versatility in the applicable target species and signal generation modes provides a hint at the design of novel staining structures and potentially enables the high-throughput readout of biomolecules.

Simple, sensitive, and quick protocol to detect less than 1 ng of bacterial lipopolysaccharide.

Detection and quantitation of lipopolysaccharide (LPS) are important for quality assurance of pharmaceutical, biopharmaceutical products and for several research and industrial aspects. The widely available assays for LPS detection are the normal, or chromogenic, and the synthetic LAL (Limulus amebocyte lysate). Unfortunately, both assays are expensive and could not distinguish between different types of bacterial LPS, while LPS silver nitrate staining requires more than 20 hr and can only detect 5 ng LPS. The current modified protocol was able to detect less than 0.5 ng LPS in a polyacrylamide-urea gel. The procedure is rapid, inexpensive, and reproducible. It depends on introducing two modifications to improve the staining sensitivity in sample buffer and staining procedure. The results revealed that excluding the reducing agent sucrose to use instead glycerol, and replacing SDS with DOC, as well as incorporation of 4 M urea in stacking and separating gels, increased the sensitivity up to 150 pg. In summary, the gels were fixed, carbohydrates moieties were oxidized to create active aldehydes, and the gels were silver stained using non-ammoniacal silver nitrate.

A cost-effective method for simultaneous homo-oligomeric size determination and monodispersity conditions for membrane proteins.

The use of blue native polyacrylamide gel electrophoresis (BN-PAGE) has been reported in the literature to retain both water-soluble and membrane protein complexes in their native hetero-oligomeric state and to determine the molecular weight of membrane proteins. However, membrane proteins show abnormal mobility when compared with water-soluble markers. Although one could use membrane proteins as markers or apply a conversion factor to the observed molecular weight to account for the bound Coomassie blue dye, when one just wants to assess homo-oligomeric size, these methods appear to be too time-consuming or might not be generally applicable. Here, during detergent screening studies to identify the best detergent for achieving a monodisperse sample, we observed that under certain conditions membrane proteins tend to form ladders of increasing oligomeric size. Although the ladders themselves contain no indication of which band represents the correct oligomeric size, they provide a scale that can be compared with a single band, representing the native homo-oligomeric size, obtained in other conditions of the screen. We show that this approach works for three membrane proteins: CorA (42 kDa), aquaporin Z (25 kDa), and small hydrophobic (SH) protein from respiratory syncytial virus (8 kDa). In addition, polydispersity results and identification of the most suitable detergent correlate optimally not only with size exclusion chromatography (SEC) but also with results from sedimentation velocity and equilibrium experiments. Because it involves minute quantities of sample and detergent, this method can be used in high-throughput approaches as a low-cost technique.

Analysis of protein glycation using phenylboronate acrylamide gel electrophoresis.

The incorporation of the specialized carbohydrate affinity ligand methacrylamido phenylboronic acid in polyacrylamide gels for SDS-PAGE analysis has been successful for the separation of carbohydrates and has here been adapted for the analysis of post-translationally modified proteins. While conventional SDS-PAGE analysis cannot distinguish between glycated and unglycated proteins, methacrylamido phenylboronate acrylamide gel electrophoresis (mP-AGE) in low loading shows dramatic retention of delta-gluconolactone modified proteins, while the mobility of the unmodified proteins remains unchanged. With gels containing 1% methacrylamido phenylboronate, mP-AGE analysis of gluconoylated recombinant protein Sbi results in the retention of the modified protein at a position expected for a protein that has quadrupled its expected molecular size. Subsequently, mP-AGE was tested on HSA, a protein that is known to undergo glycation under physiological conditions. mP-AGE could distinguish between various carbohydrate-protein adducts, using in vitro glycated HSA, and discriminate early from late glycation states of the protein. Enzymatically glycosylated proteins show no altered retention in the phenylboronate-incorporated gels, rendering this method highly selective for glycated proteins. We reveal that a trident interaction between phenylboronate and the Amadori cis 1,2 diol and amine group provides the molecular basis of this specificity. These results epitomize mP-AGE as an important new proteomics tool for the detection, separation, visualization and identification of protein glycation. This method will aid the design of inhibitors of unwanted carbohydrate modifications in recombinant protein production, ageing, diabetes, cardiovascular diseases and Alzheimer's disease.

Polyacrylamide gel photopatterning enables automated protein immunoblotting in a two-dimensional microdevice.

We demonstrate a two-dimensional microfluidic architecture that integrates polyacrylamide gel electrophoresis (PAGE) with immunoblotting in a fully automated format. This assay is designed to overcome performance limitations of conventional slab-gel immunoblotting, including multiple manual interventions, low-throughput transfer and blotting, and substantial consumption of reagents and sample. To unify PAGE with blotting in one device, this microfluidic approach makes use of high-resolution regional photopatterning of multiple polyacrylamide gel elements, and automated electrophoretic transport. A complete native immunoblot of free prostate specific antigen from human seminal fluid is demonstrated in less than 5 min. Further, the characterization of post-PAGE electrophoretic transfer showed high efficiency and minimal sample dispersion.

High-resolution preparative separation of glycosaminoglycan oligosaccharides by polyacrylamide gel electrophoresis.

Separation of milligram amounts of heparin oligosaccharides ranging in degree of polymerization from 4 to 32 is achieved within 6h using continuous elution polyacrylamide gel electrophoresis (CE-PAGE) on commercially available equipment. The purity and structural integrity of CE-PAGE-separated oligosaccharides are confirmed by strong anion exchange high-pressure liquid chromatography, electrospray ionization Fourier transform mass spectrometry, and two-dimensional nuclear magnetic resonance spectroscopy. The described method is straightforward and time-efficient, affording size-homogeneous oligosaccharides that can be used in sequencing, protein binding, and other structure-function relationship studies.

High-resolution separation of tubulin monomers on polyacrylamide minigels.

High-resolution separation of alpha- and beta-tubulin by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) on minigels can be performed rapidly using simple modifications of the standard Laemmli procedure. Separation of the subunits can be observed even in high-protein loads (up to 40microg of protein).

Sodium dodecyl sulfate-polyacrylamide gel electrophoresis for screening nonaggregating human antibody heavy chain variable domains.

Antibody heavy chain variable domains (V(H)s) form a significant class of biologics. With V(H) display libraries-the primary source of V(H) binders-unwanted aggregating V(H)s are coselected, sometimes overwhelmingly, alongside nonaggregating V(H)s. Thus, methods enabling efficient screening for nonaggregating V(H)s are highly valuable. Here, we found that on nonreducing sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) gels, nonaggregating V(H)s migrate faster than expected, giving underestimated molecular weights (MWs), whereas aggregating ones migrate slower, giving overestimated MWs. Our finding can be applied to large-scale screening for nonaggregating V(H)s and possibly other proteins, in particular in display library settings, by SDS-PAGE.

Modification of tricine-SDS-PAGE for online and offline analysis of phosphoproteins by ICP-MS.

This study describes a modification to tricine sodium dodecyl sulphate polyacrylamide gel electrophoresis to make it more effective for the separation of low molecular mass proteins and for coupling with inductively coupled plasma mass spectrometry (ICP-MS). The modified method employs low-percentage polyacrylamide gels (7-10%) (w/v) and low reagent concentrations that provide efficient separations, good quantitation and low matrix levels that are compatible with ICP-MS. Using phosphopeptides as a model system, and offline analysis, we obtained recoveries of 73% (w/v) in a 9% gel compared with 55% in a conventional 16% gel. Online coupling was achieved by modification of a standard commercially available gel electroelution apparatus and casting of the gel into a 7.3-cm-long tube. Online separation of a digest of beta-casein was demonstrated with recovery of the mono- and tetraphosphopeptides, which were identified by comparison with peptide standards. A mass balance study with the standards yielded recoveries of 95% for tetraphosphopeptides and 48% for monophosphopeptides. The factors affecting the separations and recoveries are discussed in detail. The detection limits for 10-microL samples of the mono- and tetraphosphopeptides were 0.7 microM (7 pmol) and 0.2 microM (2 pmol) respectively.

Comparison and optimization of SAR-PAGE tests for erythropoietins in doping analysis.

Erythropoietins (EPOs) are substances listed in S2 of the World Anti-Doping Agency (WADA) Prohibited List and are used commonly by athletes to increase endurance performance. According to the current WADA Technical Documents, sarcosyl-polyacrylamide gel electrophoresis (SAR-PAGE) followed by western blotting to differentiate erythropoietins based on their molecular weights is the only method that can be used for both screening and confirmation of all types of erythropoietins. The efficiency of immunopurification and protein transfer is crucial for ensuring the selectivity and sensitivity of erythropoietin detection. Several comparisons and optimization of the SAR-PAGE tests were conducted in this study. We optimized the first blotting conditions and then compared different immunopurification methods based on their selectivity, repeatability, and sensitivity for both urine and blood analysis. Additionally, rapid procedures for both urine and blood analysis were established and compared. The two-step procedure at 1.0 mA/cm2 for 60 min followed by 1.56 mA/cm2 for 20 min increased the blotting efficiency compared with the commonly used constant current approach. Comparison of immunopurification revealed no significant difference in selectivity and sensitivity between the different methods. For other factors, such as operation complexity, time and cost, a StemCell® purification kit followed by single blotting and magnetic beads followed by double blotting are recommended for urine screening and confirmation, respectively. While magnetic beads and a MAIIA® kit followed by double blotting are recommended for both screening and confirmation of blood samples, respectively. To ensure high sensitivity and selectivity, double blotting is recommended for a rapid procedure for both urine and blood analysis.

Determination of DNA methylation by COBRA: a comparative study of CGE with LIF detection and conventional gel electrophoresis.

DNA methylation as an epigenetic modification of the human genome is under emphatic investigation. Several studies have demonstrated a role of DNA methylation in oncogenesis. In conjunction with histone modifications, DNA methylation may cause the formation of heterochromatin and thus mediate the inactivation of gene transcription. It is important to develop methods that allow for an accurate quantification of the amount of DNA methylation in particular DNA regions, to gain information concerning the threshold of methylation levels necessary for gene inactivation. In this article, a CGE method with on-column LIF detection using SYBR Green is compared with a conventional slab-gel electrophoresis. We thus investigate the validity to analyze DNA methylation in the samples of a combined bisulfite restriction analysis. It is demonstrated that CGE is superior to gel electrophoresis in means of linearity, precision, accuracy, automatization (high throughput), and sample consumption. However, gel electrophoresis is easier to perform (simple devices, no PC usage), and the running costs are comparatively low. A further advantage of CGE is the sparse use of toxic compounds (MeOH and SYBR Green), whereas gel electrophoresis is performed in polyacrylamide gels with ethidium bromide staining.

Methods and reagents. Eliminating banding artifacts from SDS-PAGE.

Methods and reagents is a unique monthly column that highlights current discussions in the newsgroup bionet.molbio.methds-reagnts, available on the Internet. This month's column discusses how to avoid some artifacts when running SDS-polyacrylamide gels, and some other tips for reducing the cost of lab supplies are given as well. For details on how to partake in the newsgroup, see the accompanying box.

A Multichannel Gel Electrophoresis and Continuous Fraction Collection Apparatus for High-Throughput Protein Separation and Characterization.

We developed a multichannel gel electrophoresis system that continuously collects fractions as protein bands migrate to the bottom of gel columns. The device uses several short linear gel columns, each of a different percent acrylamide, to achieve a separation power similar to that of a long gradient gel. A "counter-free-flow" elution technique allows continuous and simultaneous fraction collection from multiple channels at low cost. Using the system with SDS-PAGE, 300 µg samples of protein can be separated and eluted into 48-96 fractions over a mass range of 10-150 kDa in 2.5 h. Each eluted protein can be recovered at 50% efficiency or higher in ~500 µL. The system can also be used for native gel electrophoresis, but protein aggregation limits the loading capacity to about 50 µg per channel and reduces resolution. This system has the potential to be coupled with mass spectrometry to achieve high-throughput protein identification.

Analysis of Protein Glycation Using Phenylboronate Acrylamide Gel Electrophoresis.

Carbohydrate modification of proteins adds complexity and diversity to the proteome. However, undesired carbohydrate modifications also occur in the form of glycation, which have been implicated in diseases such as diabetes, Alzheimer's disease, autoimmune diseases, and cancer. The analysis of glycated proteins is challenging due to their complexity and variability. Numerous analytical techniques have been developed that require expensive specialized equipment and complex data analysis. In this chapter, we describe two easy-to-use electrophoresis-based methods that will enable researchers to detect, identify, and analyze these posttranslational modifications. This new cost-effective methodology will aid the detection of unwanted glycation products in processed foods and may lead to new diagnostics and therapeutics for age-related chronic diseases.