Improved Mucoadhesion, Permeation and In Vitro Anticancer Potential of Synthesized Thiolated Acacia and Karaya Gum Combination: A Systematic Study.

Thiolation of polymers is one of the most appropriate approaches to impart higher mechanical strength and mucoadhesion. Thiol modification of gum karaya and gum acacia was carried out by esterification with 80% thioglycolic acid. FTIR, DSC and XRD confirmed the completion of thiolation reaction. Anticancer potential of developed thiomer was studied on cervical cancer cell lines (HeLa) and more than 60% of human cervical cell lines (HeLa) were inhibited at concentration of 5 µg/100 µL. Immobilized thiol groups were found to be 0.8511 mmol/g as determined by Ellman's method. Cytotoxicity studies on L929 fibroblast cell lines indicated thiomers were biocompatible. Bilayered tablets were prepared using Ivabradine hydrochloride as the model drug and synthesized thiolated gums as mucoadhesive polymer. Tablets prepared using thiolated polymers in combination showed more swelling, mucoadhesion and residence time as compared to unmodified gums. Thiol modification controlled the release of the drug for 24 h and enhanced permeation of the drug up to 3 fold through porcine buccal mucosa as compared to tablets with unmodified gums. Thiolated polymer showed increased mucoadhesion and permeation, anticancer potential, controlled release and thus can be utilized as a novel excipient in formulation development.

Application of diverse natural polymers in the design of oral gels for the treatment of periodontal diseases.

The objective of this study was to prepare periodontal gels using natural polymers such as badam gum, karaya gum and chitosan. These gels were tested for their physical and biochemical properties and assessed for their antibacterial activity against Aggregatibacter actinomycetemcomitans and Streptococcus mutans, two pathogens associated with periodontal disease. Badam gum, karaya gum and chitosan were used to prepare gels of varying concentrations. Moxifloxacin hydrochloride, a known antimicrobial drug was choosen in the present study and it was added to the above gels. The gels were then run through a battery of tests in order to determine their physical properties such as pH and viscosity. Diffusion studies were carried out on the gels containing the drug. Antimicrobial testing of the gels against various bacteria was then carried out to determine the effectiveness of the gels against these pathogens. The results showed that natural polymers can be used to produce gels. These gels do not have inherent antimicrobial properties against A. actinomycetemcomitans and S. mutans. However, they can be used as a transport vehicle to carry and release antimicrobial drugs.

Formulation and in vitro evaluation of sustained release matrix tablets using cross-linked natural gum.

Polysaccharide gums because of their biocompatibility, biodegradability and non-immunogenic properties are considered as the best choice for preparing sustained release tablets as compared to their synthetic counterpart. The cross linking of natural gums in matrix tablets increase the sustained release property of matrix tablets. Isoniazid is a first line therapy of tuberculosis, belongs to BCS I with half-life of 3-4 hours. These characteristics make isoniazid a good candidate for sustained release dosage form. Karaya gum crossed linked with trisodium tri metaphosphate was used as release rate retardant for preparing isoniazid cross-linked matrix tablet. Total 8 sustained release formulations were prepared. Both granules and tablets were evaluated under in vitro condition against different parameters. Dissolution studies were performed with all eight formulations for 12 hours using USP apparatus I. Four formulations designated as F1, F2, F3, F4 have drug and karaya gum while other four formulations F5, F6, F7, F8 have drug and crossed linked polymer in ratios of 1:1, 1:2, 1:3 and 1:4 respectively. Dissolution data was analyzed by using different kinetic models. Best fit model for most efficient formulation was zero order while release mechanism was super case I. Formulation 8 showed sufficiently slow release kinetics and about 83% of drug was released in 10 hours, indicating that cross-linked karaya gum proved efficient in preparing sustained release tablets.

Functionalization of sterculia gum for making platform hydrogels via network formation for use in drug delivery.

Recently, various advancements have been made in the development of functional polymeric materials for innovative applications. Herein this work, functionalization of sterculia gum (SG) was carried out via grafting of poly(2-(methacryloyloxy) ethyltrimethylammonium chloride) (METAC)-polyvinyl pyrrolidone (PVP) to develop hydrogel dressings as a platform for use in drug delivery (DD). The innovation of the present work is the exploration of inherent antioxidant and antimicrobial properties of the SG along with antimicrobial characteristic of poly(METAC) and PVP, to design the doxycycline encapsulated hydrogel dressings for better wound healing. FESEM, EDS and AFM analyzed the surface morphology of hydrogels. FTIR, 13C NMR and XRD inferred inclusion of poly(METAC)-PVP into polymers. 13C NMR confirmed the incorporation of poly(METAC) and PVP onto gum by the presence of a peak at 54.74 ppm because of methyl carbon attached to quaternary nitrogen of poly(METAC) and at 45.48 ppm due to the ring carbon of PVP along with FTIR peak at 949 cm-1 because of CN bending of quaternary nitrogen of poy (METAC). Thermal characterization of copolymers has been performed using TGA analysis. One gram of copolymeric hydrogel dressing absorbed 6.51 ± 0.03 g simulated salivary fluid (SSF) and 7.65 ± 0.03 g simulated wound fluid (SWF). Release of doxycycline drug occurred in a sustained manner and followed the Non-Fickian diffusion mechanism from hydrogels. The release profile was most effectively described by Hixon-Crowell kinetic model. Hydrogel demonstrated biocompatibility and expressed thrombogenicity 79.7 ± 4.9 % during its polymer-blood interactions. Copolymer revealed mucoadhesive property, requiring a force of 77.00 ± 0.01 mN to detach from bio-membrane. Additionally, it exhibited antioxidant features, showing 43.81 ± 0.286 % free radical scavenging. Hydrogel dressings were mechanically stable and revealed 0.76 ± 0.09 N mm-2 tensile strength and 9.18 ± 0.01 N burst strength. Polymer films were permeable to oxygen and water vapor and were impermeable to microorganisms. Hydrogel dressings exhibited antimicrobial properties against Pseudomonas aeruginosa and Staphylococcus aureus bacteria. Overall, these properties displayed the suitability of hydrogels for wound dressing (WD) applications which may actively enhance wound healing.

A facile green synthesis of manganese oxide nanoparticles using gum karaya polymer as a bioreductant for efficient photocatalytic degradation of organic dyes and antibacterial activity.

The release of organic dyes into water systems, mainly textile industries, poses a significant threat to human and animal health. This approach shows great potential for effectively removing harmful dyes and microorganisms from wastewater treatment for environmental remediation. This study utilized gum karaya polymer bio-reductant to synthesize manganese oxide (MnO2) nanoparticles through a green approach. The synthesized MnO2 nanoparticles were characterized and confirmed by various analytical techniques. These results revealed their nanoscale dimensions, morphology, chemical purity, crystal nature, decolorized intermediate, and band gap. The photocatalytic degradation of hazardous Congo red and methyl orange dyes using KRG-MnO2 nanoparticles under visible light irradiation. Furthermore, the results demonstrated that Congo red dye degradation efficiency of 93.34 % was achieved. The dye concentration (8 to 16 mg/L), pH concentration, and radical trapping were studied. This suggests that holes and hydroxyl radicals play a crucial role in degrading the Congo red dye and demonstrate superior recyclability after three successive cycles and good stability. The possible intermediates from the Congo red dye degradation were identified through LC-MS analysis. The polymer composite MnO2 NPs have displayed notable antibacterial activity against pathogenic bacteria such as Staphylococcus aureus and Escherichia coli. The research indicates that MnO2 nanoparticles functionalized with polymers can efficiently remove pathogens and organic dyes from diverse industrial water treatment processes.

Formulation development and in-vitro/in-vivo correlation for a novel Sterculia gum-based oral colon-targeted drug delivery system of azathioprine.

The present study was aimed at designing a microflora triggered colon-targeted drug delivery system (MCDDS) based on swellable polysaccharide, Sterculia gum in combination with biodegradable polymers with a view to target azathioprine (AZA) in the colon for the treatment of IBD with reduced systemic toxicity. The microflora degradation study of gum was investigated in rat cecal medium. The polysaccharide tablet was coated to different film thicknesses with blends of chitosan/Eudragit RLPO and over coated with Eudragit L00 to provide acid and intestinal resistance. Swelling and drug release studies were carried out in simulated gastric fluid (SGF) (pH 1.2), simulated intestinal fluid (SIF) (pH 6.8) and simulated colonic fluid (SCF) (pH 7.4 under anaerobic environment), respectively. Drug release study in SCF revealed that swelling force of the gum could concurrently drive the drug out of the polysaccharide core due to the rupture of the chitosan/Eudragit coating in microflora-activated environment. Chitosan in the mixed film coat was found to be degraded by enzymatic action of the microflora in the colon. Release kinetic data revealed that, the optimized MCDDS was fitted well into first order model and apparent lag time was found to be 6 h, followed by Higuchi spherical matrix release. The degradation of chitosan was the rate-limiting factor for drug release in the colon. In-vivo study in rabbit shows delayed T(max), prolonged absorption time, decreased C(max) and absorption rate constant (Ka) indicating reduced systemic toxicity of the drug as compared to other dosage forms.

Adsorption profile of anionic and cationic dyes through Fe3O4 embedded oxidized Sterculia gum/Gelatin hybrid gel matrix.

Hazardous effluents from textile industries being major contributors of water pollution and impose potential adverse effects on environment. In present study, Fe3O4 embedded oxidized Sterculia gum/Gelatin hybrid matrix have been fabricated and evaluated for enrichment of methyl orange (MO) and methylene blue (MB). Newly synthesized matrix was characterized through powdered XRD, FTIR, FESEM, TEM and TGA. Integrated nanoparticles improved dye enrichment and facilitated removal of matrix from the aqueous solution under the influence of magnetic field. Influence of various reaction parameters viz.: contact time, adsorbent dose, initial dye concentration, temperature & pH of the adsorption medium on dye enrichment have been evaluated. Maximum adsorption (90 % and 88 % for MO and MB respectively) has been achieved. Langmuir, Freundlich and Tempkin adsorption isotherms have been evaluated. Experimental results validate well fitted Freundlich isotherm for MO and Temkin isotherm for MB. Adsorption kinetics has been analyzed through Pseudo first order, second order kinetic and intra particle diffusion models. Adsorption of both dyes was best explained via pseudo second order kinetic model. Negative value of Gibb's free energy change (-26.487 KJ mol -1 and - 24.262 KJ mol -1) for MB and MO at 303 K was an indication of spontaneity of the reaction.

Biopharmaceutical evaluation of diclofenac sodium controlled release tablets prepared from gum karaya--chitosan polyelectrolyte complexes.

The phenomena of polymer interactions and formation of polyelectrolyte complexes (PECs) of oppositely charged polymers have been the focus of interest in fundamental and applied research. Such PECs may possess unique properties that are different from those of individual polymers. In the present study, attempts were made to prepare PECs of negative colloid gum karaya (GK) and positively charged polysaccharide chitosan (CH). The association and factors affecting the interactions between GK and CH were studied by pH and conductivity studies. The dried complexes were characterized by X-ray diffraction, Fourier transformed Infrared (FTIR) Spectroscopy, Scanning Electron Microscopy. The PECs were utilized for encapsulation of diclofenac sodium. Selected polyelectrolyte microparticles were compressed into tablets and were compared with commercial sustained release product Voveran SR®. Positive results of the study indicated the applicability of PECs in the design of oral controlled release drug delivery systems.

The effect of denture adhesives on Candida albicans growth in vitro.

OBJECTIVE: Denture-wearing favours the growth of Candida. In view of the fact that many denture wearers regularly use adhesives to enhance denture retention, stability and function, the aim of this work was to study the effect of denture adhesives on Candida albicans growth in vitro. MATERIALS AND METHODS: The denture adhesives tested were Corega(®) cream, Kukident(®) cream, Novafix(®) cream, Polident(®) cream, Protefix(®) cream, Steradent(®) cream, Aderyn(®) powder, Corega(®) ultra powder, Protefix(®) powder and Corega(®) strip. C. albicans growth curves were obtained in the presence or absence of a 1% solution of the denture adhesive diluted in Sabouraud broth. Macro- and microscopic morphological changes in C. albicans were analysed, as was microbial contamination of the denture adhesive. RESULTS: Most of the denture adhesives studied induced morphological changes in C. albicans cells and colonies, but only two had any significant inhibitory effect on yeast growth. Kukident(®) cream markedly inhibited C. albicans growth in a concentration-dependent way, reducing the growth rate by 95%, whereas Corega(®) cream also inhibited C. albicans growth but in a non-concentration-dependent way, reducing the growth rate by 37%. In addition, denture adhesives available as powders had detectable microbial contamination. CONCLUSION: Some commercially available denture adhesives showed microbial contamination and some had significant inhibitory effect on C. albicans growth.

The centrifugal spinning of vitamin doped natural gum fibers for skin regeneration.

The study investigates the use of fiber carriers, based on biopolymeric gums as potential candidates for cosmetic and dermatological applications, in particular for skin regeneration. Gum arabic (GA), xanthan gum (XA), and gum karaya (GK) were used as the main gum materials for the fibers, which were prepared by centrifugal spinning from an aqueous solution. These solutions of different mass gum ratios were blended with poly (ethylene oxide) (PEO) for better spinnability. Finally, vitamins E and C were added to selected solutions of gums. The resulting fibers were extensively investigated. The morphology and structure of all fibers were investigated by scanning electron microscopy and Fourier transformed infrared spectroscopy. Most importantly, they were characterized by the release of vitamin E loaded in the fibers using UV-VIS spectroscopy. The presentation will show that the newly prepared fibers from GA and PEO represent a very promising material for cosmetic and dermatologic applications.

Impact of weakly charged insoluble karaya gum on zein nanoparticle and mechanism for stabilizing Pickering emulsions.

The effect of weakly charged insoluble karaya gum (KG) on zein colloidal nanoparticles (ZKGPs) for stabilizing Pickering emulsions was investigated. Due to weak surface charge, KG could cover the surface of zein particles by hydrogen bonds and weak electrostatic interactions. With the increase in coverage, the zeta potential of ZKGPs changed from positive to negative values close to zero and the average particle size tended to become larger. The closest neutral wettability (89.85°) was achieved when the zein/KG mass ratio was 1:1. The samples prepared with high oil volume fraction (φ = 0.5-0.75) and high particle concentration (1.0-1.3 %, w/v) formed emulsion gels easily and showed higher storage stability. CLSM images also confirmed that ZKGPs could be distributed in the continuous phase to enhance the emulsion network structure. Consequently, weakly charged ZKGPs reduced the emulsification energy barrier and increased the coverage and steric hindrance of particles at the oil/water interface. These findings provide new ideas for the development of stable Pickering emulsions for application in food textural modification as well as encapsulation and delivery of bioactive substances.

Synergistic sorption performance of karaya gum crosslink poly(acrylamide-co-acrylonitrile) @ metal nanoparticle for organic pollutants.

In this work, we tailor facile hydrogels nanocomposite (HNC) based on sustainable karaya gum for water treatment. Karaya gum crosslink poly(acrylamide-co-acrylonitrile) @ silver nanoparticle (KG-cl-P(AAm-co-AN)@AgNPs) HNC were made by an aqueous free radical in situ crosslink copolymerization of acrylamide (AAm) and acrylic acid (AA) in aqueous solution of KG-stabilized AgNPs. FTIR, XRD, DTA-TGA, SEM, and TEM were used to characterize HNC. The hydrogels' swelling, diffusion, and network characteristics were investigated. The removal efficiency of HNC was found to be 99% at pH 8 for a crystal violet (CV), dose of 0.02 g after 1 h. Dye adsorption by these hydrogels was also investigated in terms of isotherms, and kinetics. The dye's exceptionally high adsorption capacity on HNC for CV removal is explained by H-bonding interactions, as well as dipole-dipole and electrostatic interactions between anionic adsorbent and cationic dye molecules (Qmax, 1000 mg/g). The HNC can be regenerated with 0.1 M HCl and reused at least 10 times maintaining over 68% dye removal. The loading of AgNPs into the polymeric matrix of KG-cl-P(AAm-co-AN) significantly increases the removal percentage of CV dye from its aqueous solution, according to this study.

Novelkaraya gum micro-particles loaded Ganoderma lucidum polysaccharide regulate sex hormones, oxidative stress and inflammatory cytokine levels in cadmium induced testicular toxicity in experimental animals.

Presented research aimed to develop a spray drying process without the use of organic solvents for the preparation of novel Karaya gum polymer microparticles (MPs) of Ganoderma lucidum polysaccharide (GLP). The prepared microparticles were characterized and evaluated. Prepared novel karaya gum micro-particles loaded Ganoderma lucidum polysaccharide (GLP MPs) were observed an effect on cadmium (CAD) induced testicular toxicity. A total of 40 rats (male) was divided into 4 groups viz. 1. Control group, 2. GLP MPs (250 mg/kg, 60 days of b.w per day), 3. CAD (60 days of 30 mg/l/day), 4. GLP MPs + CAD. CAD was responsible for altering the sex hormones, oxidative stress and inflammatory cytokines. Furthermore, elevated levels of indicator of oxidative stress, malondialdehyde, and a reduced action of SOD, GSH, and CAT (antioxidant enzymes), were observed in the tissues of the testicles of CAD- treated group. Such harmful occurrences were followed by an up-regulation in proinflammatory cytokines (TNF-α, IL-1ß) levels, protein expression of Nrf2, and HO-1 expression was decreased. GLP MPs pre-treatment significantly abrogated these toxic effects which were confirmed histologically. This study concluded that pre-treatment with GLP MPs exerts a protective effect against CAD-induced male reproductive testicular toxicity.

Characteristics of karaya gum based films: Amelioration by inclusion of Schisandra chinensis oil and its oleogel in the film formulation.

This research was focused to develop novel karaya gum films, modified by adding Schisandra chinensis oil and its oleogel. The films produced were assessed for physicochemical, mechanical, thermal and structural characteristics. Glass transition temperature (Tg) of control karaya gum films was recorded as 145.70 °C. Insignificant (p < 0.05) changes occurred in Tg of films in which oil was incorporated, irrespective of the concentration. However, Tg decreased significantly (p < 0.05) as oleogel was added to the karaya gum films and lowest Tg occurred for the KGOG3 films which contained highest concentration of oleogel. X-ray diffraction test depicted an obsolete amorphous behavior of control karaya gum film whereas some peaks appeared in other film samples. Scanning electron micrography (SEM) revealed a reduction in roughness and grainy morphology when oil or oleogel was added to the films. Addition of oil/oleogel enhanced the phenolic content and DPPH radical scavenging activity of the films.

Recent findings and future directions of grafted gum karaya polysaccharides and their various applications: A review.

Gum karaya is a polysaccharide that has several industrial applications in the pharmaceutical, food, and environmental fields owing to its hydrophilic, anionic, and biocompatible nature. Gum karaya and its modified forms have been assessed for drug delivery, wastewater treatment, and food industry applications. This review provides a comprehensive overview of various synthetic methods of modification of gum karaya, such as grafting initiated through free radical, microwave-assisted grafting, radiation-assisted, and enzyme-assisted modification methods. In addition, the review outlines collective industrial applications of modified gum karaya in drug delivery systems, removal of heavy atoms, dyes, food, and other biological activities, and suggests possible prospects for gum karaya modification and their remarkable industrial applications.

Physical properties of gum karaya-starch-essential oil patches.

Essential oils are used in foods, cosmetics, and pharmaceuticals. Despite the recent marketing of novel essential-oil-containing patches, there is no information on their production, constituents, or physical properties. The objectives of this study were to produce essential-oil patches and characterize their physical properties. The essential oil of Lavandula angustifolia (lavender) was included at concentrations of 2.5% to 10% in patches manufactured from the exudate gum karaya, propylene glycol, glycerol, emulsifier, and optionally, potato starch as filler. Inclusion of essential oil reduced patch strength, stiffness, and elasticity relative to patches without essential oil. Inclusion of starch in the essential-oil patches strengthened them, but reduced their elasticity. Patches' adhesion to substrate was examined by both peeling and probe-tack tests: the higher the inclusion of essential oils within the patch, the larger the decrease in its adhesion to substrate. Addition of starch to essential-oil-containing patches increased their adhesion relative to their essential-oil-only counterparts. Scanning electron micrographs of the patches provided evidence of entrapped starch granules. Although inclusion of essential oil reduced both the mechanical properties and adhesion of the patches, a high proportion of essential oil can still be included without losing patch integrity or eliminating its adhesiveness to the skin.

Modified karaya gum colloidal particles for the management of systemic hypertension.

This study undertakes the development of colloidal carriers for the purpose of oral delivery of bosentan and subsequent management of systemic hypertension. Karaya gum, a natural polymer was carboxymethylated to improve its hydrophilic character and then the carboxymethyl gum was hydrophobically modified by forming propyl ethers. The modified polymer acquired amphiphilic property and self-aggregated in water to form amphiphilic colloidal particles (ACPs) at critical concentration of 3.35 mg/L with spherical shape (<200 nm) and smooth surface morphology. The colloidal particles could entrap >90% drug in the lipophilic domain. The ionic crosslinking of the hydrophilic shell of ACPs imparted greater stability to the colloidal system. The crosslinking extended the duration of drug release under simulated gastrointestinal fluids. The crystalline drug physically turned into amorphous state after hosting into the lipophilic cores of ACPs. The entrapment resulted in significant improvement of drug dissolution rate. The polymer relaxation contributed to the diffusion process of drug from ACPs. Pre-clinical testing via oral route demonstrated that the crosslinked colloidal particles could effectively control the systemic hypertension over a period of 12 h. Hence, bosentan-loaded self-assembled colloidal particles may advance the management of systemic hypertension.

Microwave assisted synthesis of karaya gum based montmorillonite nanocomposite: Characterisation, swelling and dye adsorption studies.

A polymer-clay hybrid composite material, (KG-g-PMETAC/MMT) has been synthesised by microwave assisted free radical polymerisation using modified karaya gum and clay mineral and was characterised by various techniques. The karaya gum has been modified by grafting with (2-methacryloyloxy ethyl) trimethyl ammonium chloride prior to making the clay composite. Montmorillonite was used as the clay component. The nanocomposite exhibited pH responsive swelling behaviour. The maximum swelling of 42.23 g/g was observed at pH 7.0 and minimum of 17.28 g/g was noticed at pH 9.2. The water transport mechanism was Fickian in nature and followed second order kinetic model. The adsorption capacities of the nanocomposite for the chosen cationic dyes, methylene blue (MB), toluidine blue (TB), crystal violet (CV) and azure B (AB) were found to 155.85, 149.64, 137.77 and 128.78 mg/g respectively. The dye adsorption was found to be a pseudo-first order kinetic process. The adsorption data is found to best fit with Freundlich isotherm model indicating heterogeneous adsorption and possibility of multilayer formation. Negative value of ΔG indicated the spontaneous nature of adsorption process at the temperatures under study. The reusability studies indicated that desorption of about 70% of the adsorbed dyes can be achieved after two consecutive cycles.

Antibacterial and cytotoxic properties from esterified Sterculia gum.

Sterculia gums, as karaya and chicha gum, are complex branched and polydisperse heteropolysaccharides which can have their applications extended by improving their characteristics through chemical modifications. The objective of this work was to increase the antimicrobial activity of karaya and chicha gum through chemical modification with maleic anhydride. The incorporation of anhydride in the gum structure was confirmed by the characterization techniques. The derived biopolymers were synthesized and characterized by FTIR, X-ray diffraction, Thermogravimetric analysis and elemental analysis. Antimicrobial activity was evaluated against the Staphylococcus aureus strain (ATCC 25923). Mammalian cytotoxicity assays were also performed by MTT and hemolysis tests. The derivatives showed excellent antibacterial action inhibiting almost 100% of bacterial growth and did not present significant cytotoxicity in mammalian cells. The results showed that the derivatives are promising for biomedical applications aiming the control of infectious diseases caused by S. aureus.

Sterculia striata gum as a potential oral delivery system for protein drugs.

Natural polysaccharides have been investigated as vehicles for oral insulin administration. Because of their non-toxic, renewable, low cost and readily available properties, gums find multiple applications in the pharmaceutical industry. This work aimed to develop a Sterculia striata gum-based formulation associated with additional biopolymers (dextran sulfate, chitosan, and albumin), a crosslinking agent (calcium chloride) and stabilizing agents (polyethylene glycol and poloxamer 188), to increase the oral bioavailability of proteins. Insulin was used as a model drug and the methods used to prepare the formulation were based on ionotropic pregelation followed by electrolytic complexation of oppositely charged biopolymers under controlled pH conditions. The developed formulation was characterized to validate its efficacy, by the determination of its average particle size (622 nm), the insulin encapsulation efficiency (70%), stability in storage for 30 days, and the in vitro mucoadhesion strength (92.46 mN). Additionally, the developed formulation preserved about 64% of initial insulin dose in a simulated gastric medium. This study proposed, for the first time, a Sterculia striata gum-based insulin delivery system with potential for the oral administration of protein drugs, being considered a valid alternative for efficient delivery of those drugs.