Features of In Vitro Degradation and Physical Properties of a Biopolymer and In Vivo Tissue Reactions in Comparison with Polypropylene.

We compared in vitro degradation and physical properties of polypropylene and a biodegradable polymer synthesized by electrospinning and consisting of 65% polycaprolactone and 35% polytrimethylene carbonate as a possible alternative material for use in surgery for pelvic floor muscle failure. Samples of the studied polymers were implanted to 10 male Wistar rats into the interfascial space on the back (polypropylene on the right side and biodegradable polymer on the left side). The synthesized biopolymer was characterized by elongation and tear resistance, similar to those of polypropylene. During the period from the third to the sixth month after implantation, the area of fibrosis around individual polypropylene and biopolymer fibers increased by 16.7 and 107.9%, respectively, while remaining reduced compared to polypropylene. The total fibrosis area in 6 months after implantation of polypropylene and biopolymer samples significantly increased by 18% (p=0.0097) and 48% (p=0.05), respectively, i.e. fibrosing processes were more intense in case of biopolymer. Induction of more pronounced fibrosis can be an advantage of the synthesized biopolymer when choosing the material for fabrication of implants and their use for correction of incompetence of the ligamentous and muscular apparatus.

Set of Highly Stable Amine- and Carboxylate-Terminated Dendronized Au Nanoparticles with Dense Coating and Nontoxic Mixed-Dendronized Form.

The synthesis of a novel poly(propyleneimine) (PPI) dendron in gram scale as well as its use in the formation of a highly stable, dendronized gold nanoparticle (AuNP)-based drug delivery platform is described herein. The AuNP-based platform is composed of three complementary parts: (i) a 15 nm AuNP core, (ii) a heterofunctional thioctic acid-terminated tetraethylene glycol spacer, and (iii) a third-generation PPI dendron with a unique protonation profile and diverse end-group functionalization that allows for further derivatization. The prepared dendronized AuNPs are able to withstand several rounds of lyophilization cycles with no sign of aggregation, are stable in phosphate-buffered saline and Hanks' buffer as well as in serum, and are resistant to degradation by glutathione exchange reactions. This nanocarrier platform displays a dense coating, with >1400 dendrons/AuNPs, which will enable very high payload. Furthermore, while amine-terminated AuNPs expectedly showed cytotoxicity against the MCF-7 breast cancer cell line from a NP concentration of 1 nM, the mixed monolayer AuNPs (coated with 40/60 amine/carboxylate dendrons) interestingly did not exhibit any sign of toxicity at concentrations as high as 15 nM, similar to the carboxylate-terminated AuNPs. The described dendronized AuNPs address the current practical need for a stable NP-based drug delivery platform which is scalable and easily conjugable, has long-term stability in solution, and can be conveniently formulated as a powder and redispersed in desired buffer or serum.

Injectable Catalyst-Free Poly(Propylene Fumarate) System Cross-Linked by Strain Promoted Alkyne-Azide Cycloaddition Click Chemistry for Spine Defect Filling.

A new PPF-BCN/hyPCL32-N3 injectable system that can be cross-linked by catalyst-free, strain promoted alkyne-azide cycloaddition (SPAAC) click chemistry was developed for tissue engineering applications. The system consisted of two components: PPF-BCN, poly(propylene fumarate) (PPF) functionalized with (1R,8S,9s)-bicyclo[6.1.0]non-4-yn-9-ylmethanol (BCN-OH), and hyPCL32-N3, a hyper-branched 32-arm poly(ε-caprolactone) (PCL) dendrimer functionalized with azide as the cross-linker core. Fast SPAAC click reaction allowed the desired gelation of the system without using any toxic initiator or catalyst. Compared to the conventional injectable formulation, e.g., poly(methyl methacrylate) (PMMA), our PPF-BCN/hyPCL32-N3 (abbreviated as PFCL-Click) injectable system showed enhanced biocompatibility and low heat generation during cross-linking. After reaction, the cross-linked PFCL-Click scaffolds supported excellent proliferation and differentiation of preosteoblast cells on the surface. The PFCL-Click system can be successfully injected into vertebral bodies of rabbit spine and can be monitored by X-ray imaging after incorporating zirconium dioxide (ZrO2) powder. With these unique advantages, this injectable system has promising potential for bone defect repair and other tissue engineering and regenerative medicine applications.

Propylene Polymerization Catalyzed by Metallocene /Methylaluminoxane Systems on Rice Husk Ash.

Silica generated from agricultural waste is more cost effective and environmentally friendly than silica from traditional commercial processes. In this study, spherical silica particles with a diameter of around 120 nm were fabricated from rice husk ash (RHA), and were used to support two bridged zirconcene complexes ((I) Me2Si(Ind)2ZrCl2 and (II) C2H4(Ind)2ZrCl2 ) for catalyzing propylene polymerization to produce polypropylene (PP) in a temperature range of 40-70 C and in a solution methylaluminoxane (MAO) range of 0.1-0.6 wt%. Due to its small particle size, RHA-supported catalyst exhibited much higher activity than micro-sized commercial silica-supported catalyst. At the optimum polymerization temperature of 55 C and with increasing MAO concentration, polymer yield increased proportionally with the increase of number average molecular weight. Compared to (I), (II) produced more polymer molecules but with much shorter chain length, ascribed to the differences of Zr loading and bridge structure. With increasing polymerization temperature, polymer molecular weight decreased rapidly and resulted in a significant change of PP assembly morphology (shape and size). At 55 C, (I) produced uniform PP assemblies which had dumbbell-like structure with a smooth middle section and two fibrillar ends, while (II) produced spherical PP particles. The dumbbell middle part width was essentially identical to the Batchelor microscale proposed in turbulent mixing theory.

Application of Biocides and Super-Absorbing Polymers to Enhance the Efficiency of Filtering Materials.

Studies on the functionalization of materials used for the construction of filtering facepiece respirators (FFRs) relate to endowing fibers with biocidal properties. There is also a real need for reducing moisture content accumulating in such materials during FFR use, as it would lead to decreased microorganism survival. Thus, in our study, we propose the use of superabsorbent polymers (SAPs), together with a biocidal agent (biohalloysite), as additives in the manufacturing of polypropylene/polyester (PP/PET) multifunctional filtering material (MFM). The aim of this study was to evaluate the MFM for stability of the modifier's attachment to the polymer matrix, the degree of survival of microorganisms on the nonwoven, and its microorganism filtration efficiency. Scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy were used to test the stability of the modifier's attachment. The filtration efficiency was determined under conditions of dynamic aerosol flow of S. aureus bacteria. The survival rates (N%) of the following microorganisms were assessed: Escherichia coli and Staphylococcus aureus bacteria, Candida albicans yeast, and Aspergillus niger mold using the AATCC 100-2004 method. FTIR spectrum analysis confirmed the pre-established composition of MFM. The loss of the active substance from MFM in simulated conditions of use did not exceed 0.02%, which validated the stability of the modifier's attachment to the PP/PET fiber structure. SEM image analysis verified the uniformity of the MFM structure. Lower microorganism survival rates were detected for S. aureus, C. albicans, and E. coli on the MFM nonwoven compared to control samples that did not contain the modifiers. However, the MFM did not inhibit A. niger growth. The MFM also showed high filtration efficiency (99.86%) against S. aureus bacteria.

Development of Valsartan Floating Matrix Tablets Using Low Density Polypropylene Foam Powder: In vitro and In vivo Evaluation.

The main purpose of the study was to develop valsartan floating tablets (VFT) via non-effervescent technique using low density polypropylene foam powder, carbopol, and xanthan gum by direct compression. Before compression, the particulate powdered mixture was evaluated for pre-compression parameters. The prepared valsartan tablets were evaluated for post-compression parameters, swelling index, floating lag time, in vitro buoyancy studies, and in vitro and in vivo X-ray imaging studies in albino rabbits. The result of all formulations for pre- and post-compression parameters were within the limits of USP. FTIR and DSC studies revealed no interaction between the drug and polymers used. The prepared floating tablets had good swelling and floating capabilities for more than 12 h with zero floating lag time. The release of valsartan from optimized formulation NF-2 showed sustained release up to 12 h; which was found to be non-Fickian release. Moreover, the X-ray imaging of optimized formulation (NF-2) revealed that tablet was constantly floating in the stomach region of the rabbit, thereby indicating improved gastric retention time for more than 12 h. Consequently, all the findings and outcomes have showed that developed valsartan matrix tablets could be effectively used for floating drug delivery system.

Phasor-Fluorescence Lifetime Imaging Microscopy Analysis to Monitor Intercellular Drug Release from a pH-Sensitive Polymeric Nanocarrier.

The design of highly efficient drug carriers, and the development of appropriate techniques to monitor their mechanism of action and therapeutic effect, are both critical for improving chemotherapy. Herein, a polymeric nanoparticle, PAH-Cit/DOX (poly(allylamine)-citraconic anhydride/doxorubicin), was synthesized and used as a nanodrug system for the efficient delivery and pH-responsive release of doxorubicin (DOX) into cancer cells. The PAH-Cit/DOX nanoparticles were stable at physiological pH but effectively released DOX under weakly acidic conditions. The release efficiency was 90.6% after 60 h of dialysis in phosphate-buffered saline at pH 5.5. Confocal images showed the rapid movement of the drug from the cytoplasm to the nucleus, indicating the effective drug release MCF-7 cells. Notably, the combination of fluorescence lifetime imaging microscopy (FLIM) and phasor analysis (phasor-FLIM) provides an approach to monitor the dynamic change of DOX fluorescence lifetime in intercellular environments. Phasor-differentiated lifetime pixel intensity in FLIM images was quantified and used to evaluate the DOX release from nanocarriers, making it possible to detect the dynamics of intracellular release and transport of DOX.

Oriented Overgrowths of Poly(l-Lactide) on Oriented Isotactic Polypropylene: A Sequence of Soft and Hard Epitaxies.

The crystallization behavior of an amorphous poly(l-lactide) (PLLA) layer deposited on uniaxially oriented isotactic polypropylene (iPP) substrate is been studied by atomic force microscopy (AFM) and electron microscopy combined with electron diffraction. A patterned PLLA structure with two fixed lamella and chain orientations is observed. Electron diffraction demonstrates that the major lamellar set is oriented with molecular chains perpendicular to the chain direction of the iPP. The minor lamellar set is inclined at ≈64° to both the iPP chain axis direction and the lamellae of the major set as judged from both the bright field electron micrograph and the AFM image. The orientation of the main set is explained in terms of "soft" epitaxy or graphoepitaxy, in which PLLA chains oriented parallel to the ditches of the iPP substrate caused by alternatively arranged crystalline and amorphous regions. The minor set is due to a homoepitaxy of PLLA with parallelism of the helical paths. The orientation of this minor set of lamellae therefore depends on and can help determine the chirality-l or d-of the PLA investigated.

Synthesis, characterization and evaluation of transfection efficiency of dexamethasone conjugated poly(propyleneimine) nanocarriers for gene delivery#.

CONTEXT: Polypropylenimine (PPI), a cationic dendrimer with defined structure and positive surface charge, is a potent non-viral vector. Dexamethasone (Dexa) conveys to the nucleus through interaction with its intracellular receptor. OBJECTIVE: This study develops efficient and non-toxic gene carriers through conjugation of Dexa at various percentages (5, 10 and 20%) to the fourth and the fifth generation PPIs (PPIG4s and PPIG5s). MATERIALS AND METHODS: The 21-OH group of Dexa (0.536 mmol) was modified with methanesulfonyl chloride (0.644 mmol) to activate it (Dexa-mesylate), and then it was conjugated to PPIs using Traut's reagent. After dialysis (48 h) and lyophilization, the physicochemical characteristics of products (PPI-Dexa) including zeta potential, size, buffering capacity and DNA condensing capability were investigated and compared with unmodified PPIs. Moreover, the cytotoxicity and transfection activity of the Dexa-modified PPIs were assessed using Neuro2A cells. RESULTS: Transfection of PPIG4 was close to PEI 25 kDa. Although the addition of Dexa to PPIG4s did not improve their transfection, their cytotoxicity was improved; especially in the carrier to DNA weight ratios (C/P) of one and two. The Dexa conjugation to PPIG5s enhanced their transfection at C/P ratio of one in both 5% (1.3-fold) and 10% (1.6-fold) Dexa grafting, of which the best result was observed in PPIG5-Dexa 10% at C/P ratio of one. DISCUSSION AND CONCLUSIONS: The modification of PPIs with Dexa is a promising approach to improve their cytotoxicity and transfection. The higher optimization of physicochemical characteristics, the better cell transfection and toxicity will be achieved.

Ring-Opening Copolymerization of Maleic Anhydride with Functional Epoxides: Poly(propylene fumarate) Analogues Capable of Post-Polymerization Modification.

Three functional epoxides were copolymerized with maleic anhydride to yield degradable poly(propylene fumarate) analogues. The polymers were modified post-polymerization and post-printing with either click-type addition reactions or UV deprotection to either attach bioactive species or increase the hydrophilicity. Successful dye attachment, induced wettability, and improved cell spreading show the viability of these analogues in biomaterials applications.

Fabrication of a Biodegradable Implant with Tunable Characteristics for Bone Implant Applications.

Biodegradable polymers are appealing material for the manufacturing of surgical implants as such implants break down in vivo, negating the need for a subsequent operation for removal. Many biocompatible polymers produce acidic breakdown products that can lead to localized inflammation and osteolysis. This study assesses the feasibility of fabricating implants out of poly(propylene carbonate) (PPC)-starch that degrades into CO2 and water. The basic compression modulus of PPC-starch (1:1 w/w) is 34 MPa; however, the addition of glycerol (1% w/w) and water as plasticizers doubles this value and enhances the surface wettability. The bioactivity and stiffness of PPC-starch blends is increased by the addition of bioglass microparticles (10% w/w) as shown by in vitro osteoblast differentiation assay and mechanical testing. MicroCT analysis confirms that the bioglass microparticles are evenly distributed throughout biomaterial. PPC-starch-bioglass was tested in vivo in two animal models. A murine subcutaneous pellet degradation assay demonstrates that the PPC-starch-bioglass blend's volume fraction loss is 46% after 6 months postsurgery, while it is 27% for poly(lactic acid). In a rat knee implantation model, PPC-starch-bioglass screws inserted into the distal femur show osseointegration with no localized adverse effects after 3 and 12 weeks. These data support the further development of PPC-starch-bioglass as a medical biomaterial.

Quasi-Living Polymerization of Propene with an Isotactic-Specific Zirconocene Catalyst.

Propene polymerization with isotactic (iso)-specific C2-symmetric rac-Me2Si(2-Me-Benz(e)-Ind)2ZrCl2 (1) and rac-Me2Si(2-Me-4-Ph-1-Ind)2ZrCl2 (2) were conducted under various conditions for achieving iso-specific living polymerization of propene. When Complex 1 was activated with trialkylaluminum-free modified methylaluminoxane (dMMAO) at -40 °C, the number-average molecular weight (Mn) linearly increased against the polymerization time to reach Mn = 704,000 within 15 min of polymerization, although the molecular weight distributions was broad (Mw/Mn < 3). Thus, it was found that quasi-living polymerization of propene proceeded in the 1-dMMAO system. The living nature of iso-polypropene was confirmed by the block copolymerization, where the Mn value increased from 221,000 to 382,000 after the addition of 1-octene to yield the block copolymer with a melting point of 150 °C.

Self-regulation in flow-induced structure formation of polypropylene.

Flow-induced structure formation is investigated with in situ wide-angle X-ray diffraction with high acquisition rate (30 Hz) using isotactic polypropylene in a piston-driven slit flow with high wall shear rates (up to ≈900 s(-1) ). We focus on crystallization within the shear layers that form in the high shear rate regions near the walls. Remarkably, the kinetics of the crystallization process show no dependence on either flow rate or flow time; the crystallization progresses identically regardless. Stronger or longer flows only increase the thickness of the layers. A conceptual model is proposed to explain the phenomenon. Above a certain threshold, the number of shish-kebabs formed affects the rheology such that further structure formation is halted. The critical amount is reached already within 0.1 s under the current flow conditions. The change in rheology is hypothesized to be a consequence of the "hairy" nature of shish. Our results have large implications for process modelling, since they suggest that for injection molding type flows, crystallization kinetics can be considered independent of deformation history.

Precision Polyolefin Nanoalloy Polypropylene/Poly(ε-caprolactone).

This communication reports the first example of precision polyolefin nanoalloys where an exotic immiscible polymer is nanometrically dispersed with stability in a polyolefin matrix in a highly controlled mode. Following the preparation of polypropylene/multiwalled carbon nanotubes nanocomposites (PP/MWCNTs) by in situ Ziegler-Natta polymerization, the hydroxyl groups on the surfaces of individual MWCNTs are used to initiate ring-opening polymerization of ε-caprolactone, resulting in PP/poly(ε-caprolactone) (PCL) alloy with PCL grafted on MWCNTs. Upon phase formation, the PP/MWCNTs-g-PCL alloys exhibit a unique PCL dispersion morphology, which is stable and solely governed by PCL molecular weight.

Comonomer-induced stereo-selectivity enhancement in a c2 -symmetric metallocene-catalyzed propylene polymerization.

Propylene polymerization is carried out with a C 2 -symmetric metallocene catalyst of rac-Et(Ind)2 ZrCl2 /MAO at 40 °C in the presence of a cyclo-triene of trans,trans,cis-1,5,9-cyclododecatriene ((E,E,Z)-CDT). Comonomer incorporations are rather low (<0.10 mol%). However, it is shown for the first time that the comonomer causes a noticeable increase in poly-propylene -isotacticity (>7% in [mmmm]). (E,E,Z)-CDT is speculated to coordinate to the metal center forming comonomer-complexed active sites in charge of the entire polymerization reaction with decreased activity however increased propylene -enantiomorphic selectivity.

Preparation of Effective and Safe Gene Carriers by Grafting Alkyl Chains to Generation 5 Polypropyleneimine.

Gene therapy is a novel method to treat a variety of diseases including genetic disorders and cancer. Nonviral gene carriers have now gained considerable attention as gene carrier systems. Polyamidoamine (PAMAM) and polypropyleneimine (PPI) are the two most widely used denderimers in gene delivery studies. The aim of the current study was to investigate the effects of modification of generation 5 polypropyleneimine (G5 PPI) dendrimers with alkanoate groups as hydrophobic moieties on DNA transfection and cytotoxicity. Six, 10, and 16 carbon derivatives of bromoalkanoic acids were conjugated onto PPI with 10%, 30%, and 50% of surface amine grafting. Ethidium bromide exclusion assay results proved the ability of modified carriers to condense DNA. Transfection assay showed higher DNA delivery potential for 30% and 50% grafting with decanoate moieties compared to native G5 PPI and Superfect(TM). 3-(4,5-Dimethylthiazol-2-yl)-2,5-di phenyltetrazolium bromide (MTT) and apoptosis experiments showed lower toxicity for modified carriers compared to unmodified PPI. The hemolytic effect of grafted carriers was not significantly different from G5 PPI. Size and zeta potential measurements revealed that polyplex size was less than 200 nm and electrical charges were in the range 14-25 mV. The hydrophobic modifications improved transfection activity and toxicity of G5 PPI without negatively affecting hemocompatibility. These modified carriers are therefore promising candidates for further in vivo investigations.

A rapid and reversible colorimetric assay for the characterization of aminated solid surfaces.

The covalent immobilization of synthetic or natural macromolecular compounds containing amino groups onto polystyrene (PS) solid surfaces is of great interest in diagnostic applications. A sensitive assay allowing the determination of reactive end groups is therefore a powerful tool for predicting the performance of the active surface. Recently, we reported the use of the Coomassie brilliant blue (CBB) colorimetric reagent to quantify protonated groups (N(+)) in linear and dendritic structures in solution (Coussot et al., Polym Int 58(5):511-518, 2009). In this work, a simple method using CBB dye for the characterization of PS aminated solid surfaces is developed. The proposed amino density estimation by colorimetric assay (ADECA) method is based on the reversible complexation of the dye with the N(+) groups on solid surfaces. The assay measures the released dye thanks to the use of a unique sodium carbonate-methanol buffer. Thereby, for the first time, the same surface can be used for characterization and for further coupling applications. A surface density of four N(+) groups per square nanometer can be measured in PS microwell format, the whole characterization being done within 30 min. Performances of this new colorimetric-based method are detailed. The ADECA method is further demonstrated to be useful for the characterization of aminated polypropylene and glass materials with various sizes and shapes.

Surface characteristics of biomaterials used for space maintenance in a mandibular defect: a pilot animal study.

PURPOSE: The purpose of the present study was to evaluate the effect of implant porosity on wound healing between solid and porous implants placed within a bony mandibular defect with intraoral exposure. MATERIALS AND METHODS: Solid poly(methyl methacrylate) (PMMA) implants similar to those used currently in clinical space maintenance applications in maxillofacial surgery were compared with poly(propylene fumarate) implants that contained a porous outer surface surrounding a solid core. A 10-mm diameter nonhealing bicortical defect with open communication into the oral cavity was created in the molar mandibular region of 12 adult male New Zealand white rabbits. Of the 12 rabbits, 6 received the hybrid poly(propylene fumarate) implants and 6 received the solid PMMA implants. At 12 weeks, the rabbit mandibles were harvested and sent for histologic staining and sectioning. RESULTS: Gross inspection and histologic examination showed all 6 poly(propylene fumarate) implants to be intact within the defect site at the termination of the study period, with 3 of the 6 specimens exhibiting a continuous circumferential soft tissue margin. In contrast, 5 of the 6 PMMA-implanted specimens were exposed intraorally with an incomplete cuff of soft tissue around the implant. One of the PMMA-implanted specimens exhibited complete extrusion and subsequent loss of the implant. Fisher's exact test was used to compare the occurrence of oral cavity wound healing between the 2 groups (P = .09). CONCLUSIONS: Although statistically significant differences between the 2 groups were not seen, our results have indicated that advantages might exist to using porous implants for space maintenance. Additional study is needed to evaluate these findings.

Synthesis of a novel tannic acid-functionalized polypropylene as antioxidant active-packaging materials.

This work focuses on the synthesis of novel tannin-functionalized polypropylene copolymers that are designed to inhibit the oxidation of vegetable oils for potential use as packaging materials. An empty glass Petri dish (control), a chlorinated polypropylene-coated glass Petri dish (control) and a series of the tannin-functionalized polypropylene coated glass Petri dishes overlaid with linseed oil were exposed to air and additional white light. Oligomerization of the oxidized linseed oil was assessed by measuring the flow properties of the exposed oil using a viscometer. The antioxidant effect of the tannic acid grafted polypropylene copolymers (PP-Tann) retarded oligomerization of the linseed oil. The molar mass of the linoleic acid overlaid onto the PP-Tann films was the lowest among the tested samples after each time period indicating that tannin-grafted polypropylene may be a promising packaging material for vegetable oils.

Synthesis and characterization of a photo-cross-linked bioactive polycaprolactone-based osteoconductive biocomposite.

In this study, a light cross-linkable biocomposite scaffold based on a photo-cross-linkable poly (propylene fumarate) (PPF)-co-polycaprolactone (PCL) tri-block copolymer was synthesized and characterized. The developed biodegradable scaffold was further modified with ß-tricalcium phosphate (ß-TCP) bioceramic for bone tissue engineering applications. The developed biocomposite was characterized using H nuclear magnetic resonance and Fourier transform infrared spectroscopy. Moreover, the bioceramic particle size distribution and morphology were evaluated using Brunauer-Emmett-Teller method, X-ray diffraction, and scanning electron microscopy. The mechanical properties and biodegradation of the scaffolds were also evaluated. Cytotoxicity and mineralization assays were performed to analyze the biocompatibility and bioactivity capacity of the developed biocomposite. The characterization data confirmed the development of a biodegradable and photo-cross-linkable PCL-based biocomposite reinforced with ß-TCP bioceramic. In vitro analyses demonstrated the biocompatibility and mineralization potential of the synthesized bioceramic. Altogether, the results of the present study suggest that the photo-cross-linkable PCL-PPF-PCL tri-block copolymer reinforced with ß-TCP is a promising biocomposite for bone tissue engineering applications. According to the results, this newly synthesized material has a proper chemical composition for further clinically-relevant studies in tissue engineering.