Effects of process parameters on cutting temperature in dry machining of ball screw.
ISA Trans
; 101: 493-502, 2020 Jun.
Article
em En
| MEDLINE
| ID: mdl-32037052
ABSTRACT
Temperature in the cutting zone during dry machining has a significant effect on the tool life and surface integrity of the workpiece. This paper describes a comprehensive research on the cutting temperature in dry machining of ball screw under whirling milling by using infrared imaging. The effects of tool parameter and geometric parameter of workpiece together with the cutting parameters on the maximum and average temperatures in the cutting zone were analyzed in full detail. The influencing degree of these parameters on the maximum and average temperatures was affected by the value ranges of the parameters. In addition, the regression model and back propagation (BP) neural network model were proposed for predicting the maximum and average temperatures in the cutting zone. The verification of the predictive models showed that compared to the regression model, BP neural network model could predict the cutting temperature with high precision. The R2 of BP neural network model for predicting the maximum and average cutting temperatures in the cutting zone was higher than 99.8%, and the mean relative error and root mean square error were less than 4% and 19%, respectively.
Texto completo:
1
Base de dados:
MEDLINE
Tipo de estudo:
Prognostic_studies
Idioma:
En
Revista:
ISA Trans
Ano de publicação:
2020
Tipo de documento:
Article