Quantification of organic fluorophores in absorbing media by solid-phase fluorescence excitation-emission matrix (SPF-EEM) spectroscopy of modeled mixtures containing bovine serum albumin (BSA) and colorants.

ABSTRACT

Solid-phase fluorescence excitation-emission matrix (SPF-EEM) spectroscopy is beneficial for investigating the characteristics of natural organic matter (NOM) in the solid phase without extraction procedures. However, inner filter effect (IFE) due to the presence of dark components in samples can make it difficult to quantify the fluorophore concentration. To establish a new method to determine unknown concentrations of a fluorescent material in a sample containing various absorbing materials by SPF spectroscopy, modeled mixtures containing bovine serum albumin (BSA) and colorants at different ratios were examined. Fluorescence intensities of BSA against various concentrations afforded different saturation curves for different colorants in the mixtures, suggesting that it is difficult to use the SPF intensity for quantifying the concentration of fluorescent samples in which IFE has occurred, because one cannot obtain a single calibration curve that does not depend on the absorbing medium that it is mixed in. However, products of the fluorescence intensity and Kubelka-Munk (KM) function at the excitation wavelength were proportional to the first order of BSA weight concentrations, regardless of the colorant type. By using this trend as a calibration curve, it may be possible to quantify the amount of BSA from its SPF-EEM spectrum. In this study, the KM function was obtained using an ultraviolet-visible (UV-Vis) spectrometer with an integrating sphere. To reduce the labor and equipment cost of UV-Vis spectroscopy, a substrate of the KM function also was obtained from the Rayleigh scattering in an SPF-EEM spectrum, which could be used as a parameter for calibration curves that quantify the BSA concentration. Although further studies are required, this study proposed that the product of the SPF intensity and KM function at the excitation wavelength can be partially used for an empirical formula to quantify a variety of fluorescent materials mechanically mixed with various absorbing materials.