Synergistically active Fe3O4 magnetic and EDTA modified cellulose cotton fabric using chemical method and their effective pollutants removal ability from wastewater.

ABSTRACT

A unique combination of cotton fabric (CF) with a mixture of EDTA and APTES Fe3O4 magnetic particles was developed and utilized for the first time as an adsorbent for removing pollutants from wastewater. Initially, Fe3O4 was synthesized using the co-precipitation method. Further, the surface of Fe3O4 was modified by introducing amino functional groups through a reaction with APTES, resulting in Fe3O4-NH2. Following this, the surface of carbon fiber (CF) was altered using ethylenediaminetetraacetic acid (EDTA) to create CF@EDTA. Through the use of EDC-HCl and NHS, Fe3O4-NH2 was attached to the surface of CF@EDTA, resulting in the final product CF@EDTA/Fe3O4. Subsequently, the prepared CF@EDTA/Fe3O4 was utilized to adsorb metal pollutants from wastewater, with a thorough analysis conducted using various characterization techniques including FTIR, SEM, EDX, XRD, VSM, and XPS to study the materials. The study specifically aimed to assess the adsorption performance of our cotton-based material towards As(III) and Cr3+ metal ions. The pH study was also performed. Results indicated that the material exhibited an adsorption capacity of approximately 714 mg/g for As(III) ions and 708 mg/g for Cr3+ ions. The Langmuir and Freundlich models, as well as pseudo-first and second-order models were also analyzed. The Langmuir and pseudo-second-order models were found to best fit the data. In terms of regeneration and reusability, the materials showed straightforward regeneration and recyclability for up to 15 cycles. The remarkable adsorption capacity, combined with the unique blend of cotton and Fe3O4 magnet, along with its recyclability, positions our material CF@EDTA/Fe3O4 as a promising contender for wastewater treatment and other significant areas in water research.