Single and dual-wavelength noise-like pulses with different shapes in a double-clad Er/Yb fiber laser.

We report an experimental study of passive harmonic mode-locking in an all-fiber switchable dual-wavelength Er/Yb double-clad laser. The proposed scheme supports single- and dual-wavelength operation of mode-locked pulses with rectangular, h-like and trapezoidal shapes in a noise-like pulse regime. Single-wavelength emissions at λ1 = 1545.1 and λ2 = 1563.6 nm were obtained for pump power values of 9.42 and 6.31 W, achieving pulse durations of up to 18 and 11.8 ns, respectively. At an intermediary pump power of 7.5 W, dual-wavelength emission is obtained and pulses of around 3.59 ns are generated. Additionally, the transition dynamics until 4th-order harmonic mode-locking is also observed. Different laser operation regimes of fundamental and different orders of harmonic mode-locking, with rectangular, h-shaped or trapezoidal shaped pulses are obtained with the same laser configuration with simple and well-defined plates and pump power adjustments.

Adaptable Optical Fiber Displacement-Curvature Sensor Based on a Modal Michelson Interferometer with a Tapered Single Mode Fiber.

A compact, highly sensitive optical fiber displacement and curvature radius sensor is presented. The device consists of an adiabatic bi-conical fused fiber taper spliced to a single-mode fiber (SMF) segment with a flat face end. The bi-conical taper structure acts as a modal coupling device between core and cladding modes for the SMF segment. When the bi-conical taper is bent by an axial displacement, the symmetrical bi-conical shape of the tapered structure is stressed, causing a change in the refractive index profile which becomes asymmetric. As a result, the taper adiabaticity is lost, and interference between modes appears. As the bending increases, a small change in the fringe visibility and a wavelength shift on the periodical reflection spectrum of the in-fiber interferometer is produced. The displacement sensitivity and the spectral periodicity of the device can be adjusted by the proper selection of the SMF length. Sensitivities from around 1.93 to 3.4 nm/mm were obtained for SMF length between 7.5 and 12.5 cm. Both sensor interrogations, wavelength shift and visibility contrast, can be used to measure displacement and curvature radius magnitudes.

Polarization evolution of vector wave amplitudes in twisted fibers pumped by single and paired pulses.

Nonlinear polarization dynamics of single and paired pulses in twisted fibers is experimentally and numerically studied. Accompanying a dramatic difference in the output spectrum when a single- or double-amplified soliton pulse is launched in the fiber, the output polarization for the two cases also reveals very different characteristics.

Dynamics of noise-like pulsing at sub-ns scale in a passively mode-locked fiber laser.

We report an original noise-like pulse dynamics observed in a figure-eight fiber laser, in which fragments are continually released from a main waveform that circulates in the cavity. Particularly, we report two representative cases of the dynamics: in the first case the released fragments drift away from the main bunch and decay over a fraction of the round-trip time, and then vanish suddenly; in the second case, the sub-packets drift without decaying over the complete cavity round-trip time, until they eventually merge again with the main waveform. The most intriguing result is that these fragments, as well as the main waveform, are formed of units with sub-ns duration and roughly the same energy.

Theoretical and experimental analysis of tunable Sagnac high-birefringence loop filter for dual-wavelength laser application.

We present detailed investigations of the spectral dependencies of the transmission of a fiber optical loop mirror (FOLM) consisting of a coupler with output ports spliced at arbitrary angles to a high-birefringence (Hi-Bi) fiber. The application for dual-wavelength lasers is discussed. For this aim, the spectral dependence of the reflection is tuned by the temperature of the Hi-Bi fiber that allows a fine adjustment of the cavity loss for generated wavelengths. The ratio between maximum and minimum reflection can be adjusted by the twist angle of the fiber at the splices, which also provides useful possibilities for the adjustment of cavity losses. We used the twist and temperature variation of the Hi-Bi fiber to change the operation from single wavelength to stable dual-wavelength generation with either equal or unequal powers of wavelengths.