Gamma-irradiation-induced micro-structural variations in flame-retardant polyurethane foam using synchrotron X-ray micro-tomography.

Flame-retardant polyurethane foams are potential packing materials for the transport casks of highly active nuclear materials for shock absorption and insulation purposes. Exposure of high doses of gamma radiation causes cross-linking and chain sectioning of macromolecules in this polymer foam, which leads to reorganization of their cellular microstructure and thereby variations in physico-mechanical properties. In this study, in-house-developed flame-retardant rigid polyurethane foam samples were exposed to gamma irradiation doses in the 0-20 kGy range and synchrotron radiation X-ray micro-computed tomography (SR-µCT) imaging was employed for the analysis of radiation-induced morphological variations in their cellular microstructure. Qualitative and quantitative analysis of SR-µCT images has revealed significant variations in the average cell size, shape, wall thickness, orientations and spatial anisotropy of the cellular microstructure in polyurethane foam.

Synchrotron-based phase-sensitive imaging of leaves grown from magneto-primed seeds of soybean.

Experiments were conducted to study the effects of static magnetic fields (SMFs) on the venation network of soybean leaves using the synchrotron-based X-ray micro-imaging technique. The seeds of soybean (Glycine max, variety JS-335) were pretreated with different SMFs from 50 to 300 mT in steps of 50 mT for 1 h. The phase-contrast images obtained showed that, as the strength of the SMF increased, the area, width of the midrib, area of the midrib and minor vein of the middle leaflets of third trifoliate leaves also increased up to the SMF strength of 200 mT (1 h) and decreased thereafter. Quantification of the major conducting vein also showed the differences in the major and minor vein structures of the soybean leaves as compared with control leaves. Further, the phase-retrieval technique has been applied to make the segmentation process easy and to quantify the major and minor veins in the venation network. The width and area of midrib enhancement by pre-treatment with SMF implies an enhancement in the uptake of water, which in turn causes an increased rate of photosynthesis and stomatal conductance.

Synchrotron X-ray phase contrast imaging of leaf venation in soybean (Glycine max) after exclusion of solar UV (280-400†nm) radiation.

The hydraulic efficiency of a leaf depends on its vascular structure as this is responsible for transport activities. To investigate the effect of exclusion of UVAB and UVB radiation from the solar spectrum on the micro-structure of leaves of soybean (Glycine max, variety JS-335), a field experiment was conducted using synchrotron-based phase contrast imaging (PCI). Plants were grown in specially designed UV exclusion chambers, and wrapped with filters that excluded UVB (280-315 nm) or UVAB (280-400 nm), or transmitted all the ambient solar UV (280-400 nm) radiation (filter control). Qualitative observation of high-resolution X-ray PCI images obtained at 10 keV has shown the differences in major and minor vein structures of the leaves. The mid-rib width of the middle leaflet of third trifoliate leaves, for all treatments, were obtained using quantitative image analysis. The width of the mid-rib of the middle leaflet of third trifoliate leaves of UVB excluded plants was found to be more compared to leaves of filter control plants, which are exposed to ambient UV. The mid-rib or the main conducting vein transports water and sugars to the whole plant; therefore, mid-rib enhancement by the exclusion of solar UV radiation possibly implies enhancement in the leaf area which in turn causes an increased rate of photosynthesis.

Non-destructive evaluation of teeth restored with different composite resins using synchrotron based micro-imaging.

BACKGROUND: Application of high resolution synchrotron micro-imaging in microdefects studies of restored dental samples. OBJECTIVE: The purpose of this study was to identify and compare the defects in restorations done by two different resin systems on teeth samples using synchrotron based micro-imaging techniques namely Phase Contrast Imaging (PCI) and micro-computed tomography (MCT). With this aim acquired image quality was also compared with routinely used RVG (Radiovisiograph). METHODS: Crowns of human teeth samples were fractured mechanically involving only enamel and dentin, without exposure of pulp chamber and were divided into two groups depending on the restorative composite materials used. Group A samples were restored using a submicron Hybrid composite material and Group B samples were restored using a Nano-Hybrid restorative composite material. Synchrotron based PCI and MCT was performed with the aim of visualization of tooth structure, composite resin and their interface. RESULTS: The quantitative and qualitative comparison of phase contrast and absorption contrast images along with MCT on the restored teeth samples shows comparatively large number of voids in Group A samples. CONCLUSIONS: Quality assessment of dental restorations using synchrotron based micro-imaging suggests Nano-Hybrid resin restorations (Group B) are better than Group A.

Development and performance evaluation of frustum cone shaped churn for small scale production of butter.

The present research was intended to develop a small scale butter churn and its performance by altering churning temperature and churn speed during butter making. In the present study, the cream was churned at different temperatures (8, 10 and 12 °C) and churn speeds (35, 60 and 85 rpm). The optimum parameters of churning time (40 min), moisture content (16 %) and overrun (19.42 %) were obtained when cream was churned at churning temperature of 10 °C and churn speed of 60 rpm. Using appropriate conditions of churning temperature and churn speed, high quality butter can be produced at cottage scale.

Design, development and first experiments on the X-ray imaging beamline at Indus-2 synchrotron source RRCAT, India.

A full-field hard X-ray imaging beamline (BL-4) was designed, developed, installed and commissioned recently at the Indus-2 synchrotron radiation source at RRCAT, Indore, India. The bending-magnet beamline is operated in monochromatic and white beam mode. A variety of imaging techniques are implemented such as high-resolution radiography, propagation- and analyzer-based phase contrast imaging, real-time imaging, absorption and phase contrast tomography etc. First experiments on propagation-based phase contrast imaging and micro-tomography are reported.

Reflex syncope, anxiety level, and family history of cardiovascular disease in young women: case-control study.

AIMS: Anxiety is an emotion, which stimulates sympathetic nervous outflow potentially facilitating vasovagal reflex syncope (VVS) but reports on anxiety levels in patients with VVS are sparse. METHODS AND RESULTS: We studied anxiety levels in young women (21-40 years) referred for unexplained transient loss of consciousness (TLOC), and age-matched female controls with or without past history of TLOC (≈probable VVS). Referred patients underwent head-up tilt (HUT) according to current ESC Guidelines. State and Trait Anxiety Inventory questionnaire evaluated anxiety levels plus a questionnaire explored risk factors for cardiovascular disease (CVD). Sixty-five of 91 women were diagnosed with VVS on HUT. Among 549 controls, 223 (40.6%) reported at least one episode of TLOC. State-anxiety level in patients with VVS undergoing HUT (42.4 ± 9.3) was higher compared with both controls with (38.3 ± 10.2; P < 0.01) and without past TLOC history (35.9 ± 9.8; P < 0.001). Trait anxiety in patients with VVS (42.7 ± 8.4), and controls with TLOC history (42.4 ± 8.4) was higher compared with controls without TLOC history (39.7 ± 8.5; P < 0.01). In the logistic regression using controls without TLOC as reference, both VVS diagnosis and past history of TLOC were associated with family history of CVD [odds ratio (OR) 2.4, 95% confidence interval (CI), 1.3-4.4; P = 0.007, and 2.3, 1.4-3.6; P = 0.001, respectively], and this association was independent of anxiety level. CONCLUSIONS: Trait anxiety and family history of CVD are increased in both young women with VVS and controls with history of TLOC. However, the height of anxiety level does not explain CVD heredity and other mechanisms may link syncope with CVD.

Pseudomyxoma peritonei originating from urachus-case report and review of the literature.

Pseudomyxoma peritonei (pmp) is a rare clinical condition defined as extensive intraperitoneal spread of mucus associated with a variety of mucinous tumours of varying biologic behavior. Although appendix or ovaries have usually been implicated as the primary site, cases have been reported in association with neoplastic lesions of other sites. Pseudomyxoma peritonei originating from urachal remnants is a unique entity, reported only 18 times in the English literature thus far. Considering the rarity of the lesion, we report the case of a 50-year-old man surgically treated for pmp associated with a low-grade mucinous urachal neoplasm. Unique aspects of case are the low histologic aggressiveness of the causative lesion (reported only twice worldwide) and the early stage of the disease, with a relatively small amount of intraperitoneal free mucin. Review of the literature about pmp in general and a collation of previously reported cases of pmp originating from the urachus are presented and discussed.

Energy use pattern in rice milling industries-a critical appraisal.

Rice milling industry is one of the most energy consuming industries. Like capital, labour and material, energy is one of the production factors which used to produce final product. In economical term, energy is demand-derived goods and can be regarded as intermediate good whose demand depends on the demand of final product. This paper deals with various types of energy pattern used in rice milling industries viz., thermal energy, mechanical energy, electrical energy and human energy. The important utilities in a rice mill are water, air, steam, electricity and labour. In a rice mill some of the operations are done manually namely, cleaning, sun drying, feeding paddy to the bucket elevators, weighing and packaging, etc. So the man-hours are also included in energy accounting. Water is used for soaking and steam generation. Electricity is the main energy source for these rice mills and is imported form the state electricity board grids. Electricity is used to run motors, pumps, blowers, conveyors, fans, lights, etc. The variations in the consumption rate of energy through the use of utilities during processing must also accounted for final cost of the finished product. The paddy milling consumes significant quantity of fuels and electricity. The major energy consuming equipments in the rice milling units are; boilers and steam distribution, blowers, pumps, conveyers, elevators, motors, transmission systems, weighing, etc. Though, wide variety of technologies has been evolved for efficient use of energy for various equipments of rice mills, so far, only a few have improved their energy efficiency levels. Most of the rice mills use old and locally available technologies and are also completely dependent on locally available technical personnel.

Optimization based ECG watermarking in RDWT-SVD domain.

With the increase in point of care services, communication of digital patient records through open network has multi-folded. This digital data is used to obtain the remote medical assistance from the smart healthcare centres. Protecting this data during transmission is a very big challenge. One of the most important medical data is electrocardiogram (ECG) signal which detects the cardiovascular diseases and any alteration in the signal may affect the diagnosis. In this work, an ECG watermarking based on redundant discrete wavelet transform (RDWT) and singular value decomposition (SVD) is developed. First, the ECG signal is converted into 2-D matrix using pan-tompkins algorithm. Then, we use the hybrid of RDWT and SVD to conceal the patient data and logo image into the 2-D ECG image. We also use hybrid of optimization scheme to improve the robustness of the watermark. Preliminary experimental results indicate the optimal invisibility and robustness result is more effective up to 97.89% than the traditional schemes respectively, which makes it suitable for ownership authentication of ECG signal.

Evaluation and optimization of preparative variables for controlled-release floating microspheres of levodopa/carbidopa.

Levodopa, a prodrug of dopamine, is the first line drug in the treatment of Parkinson's disease. All current levodopa products are formulated in combination with aromatic amino acid decarboxylase inhibitors such as carbidopa or benserazide to prevent the peripheral metabolism of levodopa. The objective of the present investigation was to produce floating microspheres of carbidopa (CD)/levodopa (LD) to enhance their efficacy by increasing their gastric residence time, which is major technique to improve efficacy of narrow absorption window drugs. The microspheres were prepared by the o/w emulsion-solvent diffusion method using polymers hydroxypropylmethyl cellulose K15 M (HPMC K15 M) and ethyl cellulose (EC). The effects of various formulation and process variables on the particle size, in vitro floating behavior, percent drug entrapment, and in vitro drug release were studied. The size and surface morphology of prepared microspheres were characterized by optical and scanning electron microscopy, respectively. In vitro drug release studies were performed and drug release kinetics was evaluated using the linear regression analysis. The prepared microspheres exhibited prolonged drug release (approximately 10h) and remained buoyant for >12 h. Spherical and smooth-surfaced microspheres with encapsulation efficiency ranging from 43% to 80% were obtained. In vitro studies demonstrated diffusion-controlled drug release from the microspheres.

Development and characterization of in situ gel system for nasal insulin delivery.

The objective of the present study was to develop a thermosensitive in situ gel system based on chitosan and poly vinyl alcohol (PVA) for nasal delivery of insulin. The hydrogel was prepared by mixing chitosan and PVA. The concentration of the components was optimized during formulation development. The prepared hydrogel was characterized for gelation temperature, gelation time, viscosity changes, degree of swelling, in vitro release and in vivo hypoglycemic effect. The prepared hydrogel was liquid at room temperature while underwent thermal transition from solution below or at room temperature to non-flowing hydrogel when incubated at 37 degrees C for approximately 12 minutes with increased viscosity. The in vitro release of insulin from gel network was observed spectrophotometrically which was good enough to maintain blood glucose level for six hour. Furthermore, the formulation when evaluated for their in vivo hypoglycemic effect, demonstrated its ability to reduce glucose level. The observed in vitro and in vivo results indicate that the proposed thermosensitive in situ gelling system has substantial potential as nasal delivery system for insulin.

Suppression of epididymal sperm antigenicity in the rabbit by uteroglobin and transglutaminase in vitro.

There is evidence that the mammalian female genital tract is capable of responding immunologically when challenged with alloantigens. The antigenic properties of male gametes have been well delineated. However, it is only rarely that a female mammal ever responds immunologically to the male gametic antigens as a result of coitus. When a proposed mechanism of suppression of antigenicity of epididymal spermatozoa was tested experimentally, the results indicated that two proteins (uteroglobin and transglutaminase) present in the prostate may be responsible for suppressing sperm antigenicity in the rabbit.

Long-term functional restoration by neural progenitor cell transplantation in rat model of cognitive dysfunction: co-transplantation with olfactory ensheathing cells for neurotrophic factor support.

Neural progenitor cell transplantation has emerged as a promising approach for cell replacement therapy in the brain of neurodegenerative diseases. These are multipotent stem cells with self-renewal capabilities and can give rise to cells of all the three lineages of nervous system and can be maintained and differentiated to desirable neuronal subtypes in vitro with known trophic factors. However, like fetal cells, neural progenitor cells after differentiating to specific neuronal type also require continuous neurotrophic factor support for their long-term survival following transplantation. Recent reports suggest that olfactory ensheathing cells are capable of providing continuous neurotrophic factor to the transplanted neural progenitor cells for their long-term survival. In the present investigation, an attempt has been made to validate functional restoration in kainic acid lesioned rat model of cognitive dysfunction following co-transplantation of neural progenitor cells with olfactory ensheathing cells. Animals lesioned with kainic acid in CA3 subfield of hippocampal region were transplanted with neural progenitor cells, olfactory ensheathing cells or neural progenitor cells+olfactory ensheathing cells together. Twelve weeks post-transplantation functional restoration was assessed using neurobehavioral, neurochemical, and immunohistochemical approaches. Significant recovery in learning and memory (89%) was observed in co-transplanted group when compared to lesioned group. This was accompanied by significantly higher expression of choline acetyltransferase and restoration in cholinergic receptor binding in co-transplanted group (61%) over the animals transplanted either olfactory ensheathing cells or neural progenitor cells alone. Role of olfactory ensheathing cells in supplementing neurotrophic factors was further substantiated in vitro by pronounced differentiation of neural progenitor cells to choline acetyltransferase/acetylcholine esterase immunoreactive cells when co-cultured with olfactory ensheathing cells as compared to neural progenitor cells alone. The results strengthened the hypothesis that co-transplantation of olfactory ensheathing cells and neural progenitor cells may be a better approach for functional restoration in kainic acid induced rat model of cognitive dysfunction.

Phantom-Based Feasibility Studies on Phase-Contrast Mammography at Indian Synchrotron Facility Indus-2.

INTRODUCTION: Use of synchrotron radiation (SR) X-ray source in medical imaging has shown great potential for improving soft-tissue image contrast such as the breast. The present study demonstrates quantitative X-ray phase-contrast imaging (XPCI) technique derived from propagation-dependent phase change observed in the breast tissue-equivalent test materials. MATERIALS AND METHODS: Indian synchrotron facility (Indus-2, Raja Ramanna Centre of Advanced Technology [RRCAT]) was used to carry out phantom feasibility study on phase-contrast mammography. Different phantoms and samples, including locally fabricated breast tissue-equivalent phantoms were used to perform absorption and phase mode imaging using 12 and 16 keV SR X-ray beam. Edge-enhancement index (EEI) and edge enhancement to noise ratio (EE/N) were measured for all the images. Absorbed dose to air values were calculated for 12 and 16 keV SR X-ray beam using the measured SR X-ray photon flux at the object plane and by applying the standard radiation dosimetry formalism. RESULTS AND CONCLUSION: It was observed in case of all the phantoms and test samples that EEI and EE/N values are relatively higher for images taken in the phase mode. The absorbed dose to air at imaging plane was found to be 75.59 mGy and 28.9 mGy for 12 and 16 keV SR energies, respectively. However, these dose values can be optimized by reducing the image acquisition time without compromising the image quality when clinical samples are imaged. This work demonstrates the feasibility of XPCI in mammography using 12 and 16 keV SR X-ray beams.

3D spatial distribution of ore mineral phases using high resolution synchrotron micro-computed tomography (µCT) combined with optical microscopy.

Ore minerals in dolomites and Graphite Mica Schist (GMS) were studied by synchrotron radiation micro-computed tomography (SR-µCT) and optical microscopy. High resolution µCT images of ore minerals were obtained at Imaging Beamline (BL-4), Indus-2 synchrotron radiation source for the comprehensive volume characterization of minerals. Optical microscopy was used for mineral identification, mineral/rock characterization and quantification of ore mineral assemblages was also confirmed by XRD. 3D images from SR-µCT have shown spatial distribution of major minerals and crystals of different minerals in the volume of samples. The results obtained shows that the GMS and dolomitic hosted rocks mined from region near Udaipur, Rajasthan contains sulfide mineral phases. SR-µCT facilitates visualization of the association of the various metallic minerals with the host rock. The presence of economically important metallic minerals galena, sphalerite and pyrite found in the samples through SR-µCT has implications on exploration and processing of ores.

Biomechanical investigation of 'figure of 8' flexor tendon repair techniques.

This biomechanical study compared the original Al-Qattan repair with other modifications postulated to reduce bulk and friction, thereby potentially improving outcome. A total of 32 cadaveric digits with intact flexor apparatus were used. In each digit, the flexor digitorum profundus and flexor digitorum superficialis tendons were cut cleanly in Zone 2. We tested Al-Qattan's technique along with three modifications using stronger suture material and varying the number of strands across the repair site. Of the four repair techniques, the modified Al-Qattan's technique using two 'figure of 8' 4-0 Fiberwire core sutures (Group 4) had the best balance of ultimate tensile strength (50.9 N), 2 mm gapping force (38 N) and friction. The modified technique provided a stronger repair for early active mobilization and has less friction than the originally described repair.

Application of X-ray micro-CT for micro-structural characterization of APCVD deposited SiC coatings on graphite conduit.

SiC coatings are commonly used as oxidation protective materials in high-temperature applications. The operational performance of the coating depends on its microstructure and uniformity. This study explores the feasibility of applying tabletop X-ray micro-CT for the micro-structural characterization of SiC coating. The coating is deposited over the internal surface of pipe structured graphite fuel tube, which is a prototype of potential components of compact high-temperature reactor (CHTR). The coating is deposited using atmospheric pressure chemical vapor deposition (APCVD) and properties such as morphology, porosity, thickness variation are evaluated. Micro-structural differences in the coating caused by substrate distance from precursor inlet in a CVD reactor are also studied. The study finds micro-CT a potential tool for characterization of SiC coating during its future course of engineering. We show that depletion of reactants at larger distances causes development of larger pores in the coating, which affects its morphology, density and thickness.

Tuftsin-bearing liposomes in treatment of macrophage-based infections.

The use of liposomes as drug carriers in treatment of various diseases has been explored extensively for more than 20 years. 'Conventional' liposomes, when administered in vivo by a variety of routes, rapidly accumulate in the mononuclear phagocyte system (MPS). The inherent tendency of the liposomes to concentrate in MPS can be exploited in enhancing the non-specific host defence against infections by entrapping in them the macrophage modulators, and as carriers of antibiotics in treatment of intracellular infections that reside in MPS. This must further be enhanced by grafting on the liposome surface the ligands, e.g. tuftsin, that not only binds specifically to the MPS cells but also enhances their natural killer activity. Keeping this in view, we designed and developed tuftsin-bearing liposomes as drug carriers for the treatment of macrophage-based infections and outline these studies in this overview.