Surface Composition and Aerosolization Stability of an Inhalable Combinational Powder Formulation Spray Dried Using a Three-Fluid Nozzle.

PURPOSE: This study aims to understand the impact of spray drying nozzles on particle surface composition and aerosol stability. METHODS: The combination formulations of colistin and azithromycin were formulated by 2-fluid nozzle (2 N) or 3-fluid (3 N) spray drying in a molar ratio of 1:1. A 3-factor, 2-level (23) factorial design was selected to investigate effects of flow rate, inlet temperature and feed concentration on yield of spray drying and the performance of the spray dried formulations for the 3 N. RESULTS: FPF values for the 2 N formulation (72.9 ± 1.9% for azithromycin & 73.4 ± 0.8% for colistin) were higher than those for the 3 N formulation (56.5 ± 3.8% for azithromycin & 55.1 ± 1.6% for colistin) when stored at 20% RH for 1 day, which could be attributed to smaller physical size for the 2 N. There was no change in FPF for both drugs in the 2 N formulation after storage at 75% RH for 90 days; however, there was a slight increase in FPF for colistin in the 3 N formulation at the same storage conditions. Surface enrichment of hydrophobic azithromycin was measured by X-ray photoelectron spectroscopy for both 2 N and 3 N formulations and interactions were studied using FTIR. CONCLUSIONS: The 3-fluid nozzle provides flexibility in choosing different solvents and has the capability to spray dry at higher feed solid concentrations. This study highlights the impact of hydrophobic azithromycin enrichment on particle surface irrespective of the nozzle type, on the prevention of moisture-induced deterioration of FPF for hygroscopic colistin.

Improved Physical Stability and Aerosolization of Inhalable Amorphous Ciprofloxacin Powder Formulations by Incorporating Synergistic Colistin.

This study aimed to develop dry powder inhaler (DPI) combination formulations of ciprofloxacin and colistin for use in respiratory infections. Effects of colistin on physical stability and aerosolization of spray-dried ciprofloxacin were examined. The combination DPI formulations were produced by co-spray drying colistin and ciprofloxacin in mass ratios of 1:1, 1:3, and 1:9. Colistin and ciprofloxacin were also co-sprayed with l-leucine in the mass ratio of 1:1:1. The physical and aerosolization stability of the selected co-sprayed formulations stored at 20, 55, and 75% relative humidity (RH) were examined. Formulation characterizations were carried out using powder X-ray diffraction (PXRD) for crystallinity, scanning electron microscopy for morphology and particle size distribution, and dynamic vapor sorption for moisture sorption. Particle surface analysis was performed using X-ray photoelectron spectroscopy, energy dispersive X-ray spectrometry, and nano-time-of-flight secondary ion mass spectrometry. Potential intermolecular interactions were studied using Fourier-transform infrared spectroscopy (FTIR). Aerosol performance was evaluated using a multistage liquid impinger with a RS01 monodose inhaler device. PXRD diffractograms showed that the co-spray-dried colistin-ciprofloxacin formulation in the mass ratio (1:1) was amorphous at 55% RH for up to 60 days; whereas the co-spray-dried colistin-ciprofloxacin (1:3) and colistin-ciprofloxacin (1:9) crystallized after storage for 3 days at 55% RH. However, the extent of crystallization for the combination formulations was less as compared to the spray-dried ciprofloxacin alone formulation. Surface morphology of the co-spray-dried formulations at different concentrations did not change even after storage at 55% RH for 60 days, unlike the spray-dried ciprofloxacin alone powder which became rougher after 3 days of storage at 55% RH. Surface analysis data indicated surface enrichment of colistin in the co-spray-dried formulations. Increasing colistin concentration on the composite particles surfaces improved aerosol performance of ciprofloxacin. FTIR data demonstrated intermolecular interactions between colistin and ciprofloxacin, thereby delaying and/or preventing crystallization of ciprofloxacin when co-spray-dried. Co-spray drying ciprofloxacin with colistin in the mass ratio (1:1) completely prevented crystallization of ciprofloxacin at 55% RH for up to 60 days. However, the colistin-ciprofloxacin formulation (1:1) began to fuse when stored at 75% RH due to moisture absorption resulting in a compromised aerosol performance. In contrast, the colistin-ciprofloxacin-leucine (1:1:1) formulation demonstrated no particle fusion, enabling a stable aerosol performance at 75% RH for 7 days. This study demonstrated that incorporation of colistin in the spray-dried formulations can improve physical stability and aerosolization of amorphous ciprofloxacin at 55% RH. At 75% RH, further addition of l-leucine in the formulation prevented particle fusion and deterioration in aerosol performance, attributed to the enrichment of nonhygroscopic l-leucine on the particle surface.