The recent development of carbon-based nanoparticles as a novel approach to skin tissue care and management - A review.

Since the skin is the first barrier of the body's defense against pathogens, delays in the healing process are affected by infections. Therefore, applying advanced substitute assistance improves the patient's quality of life. Carbon-based nanomaterials show better capabilities than conventional methods for managing skin wound infections. Due to their physicochemical properties such as small size, large surface area, great surface-to-volume ratio, and excellent ability to communicate with the cells and tissue, carbon-based nanoparticles have been considered in regenerative medicine. moreover, the carbon nano family offers attractive potential in wound healing via the improvement of angiogenesis and antibacterial compared to traditional approaches become one of the particular research interests in the field of skin tissue engineering. This review emphasizes the wound-healing process and the role of carbon-based nanoparticles in wound care management interaction with tissue engineering technology.

Preparation and characterization of propolis reinforced eggshell membrane/ GelMA composite hydrogel for biomedical applications.

Gelatin methacrylate-based hydrogels (GelMA) were widely used in tissue engineering and regenerative medicine. However, to manipulate their various chemical and physical properties and create high-efficiency hydrogels, different materials have been used in their structure. Eggshell membrane (ESM) and propolis are two nature-derived materials that could be used to improve the various characteristics of hydrogels, especially structural and biological properties. Hence, the main purpose of this study is the development of a new type of GelMA hydrogel containing ESM and propolis, for use in regenerative medicine. In this regard, in this study, after synthesizing GelMA, the fragmented ESM fibers were added to it and the GM/EMF hydrogel was made using a photoinitiator and visible light irradiation. Finally, GM/EMF/P hydrogels were prepared by incubating GM/EMF hydrogels in the propolis solution for 24 h. After various structural, chemical, and biological characterizations, it was found that the hydrogels obtained in this study offer improved morphological, hydrophilic, thermal, mechanical, and biological properties. The developed GM/EMF/P hydrogel presented more porosity with smaller and interconnected pores compared to the other hydrogels. GM/EMF hydrogels due to possessing EMF showed compressive strength up to 25.95 ± 1.69 KPa, which is more than the compressive strength provided by GM hydrogels (24.550 ± 4.3 KPa). Also, GM/EMF/P hydrogel offered the best compressive strength (44.65 ± 3.48) due to the presence of both EMF and propolis. GM scaffold with a contact angle of about 65.41 ± 2.199 θ showed more hydrophobicity compared to GM/EMF (28.67 ± 1.58 θ), and GM/EMF/P (26.24 ± 0.73 θ) hydrogels. Also, the higher swelling percentage of GM/EMF/P hydrogels (343.197 ± 42.79) indicated the high capacity of this hydrogel to retain more water than other scaffolds. Regarding the biocompatibility of the fabricated structures, MTT assay results showed that GM/EMF/P hydrogel significantly (p-value < 0.05) supported cell viability. Based on the results, it seems that GM/EMF/P hydrogel could be a promising biomaterial candidate for use in various fields of regenerative medicine.

An overview on the treatments and prevention against COVID-19.

BACKGROUND: The coronavirus disease 2019 (COVID-19) caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) continues to plague the world. While COVID-19 is asymptomatic in most individuals, it can cause symptoms like pneumonia, ARDS (acute respiratory distress syndrome), and death in others. Although humans are currently being vaccinated with several COVID-19 candidate vaccines in many countries, however, the world still is relying on hygiene measures, social distancing, and approved drugs. RESULT: There are many potential therapeutic agents to pharmacologically fight COVID-19: antiviral molecules, recombinant soluble angiotensin-converting enzyme 2 (ACE2), monoclonal antibodies, vaccines, corticosteroids, interferon therapies, and herbal agents. By an understanding of the SARS-CoV-2 structure and its infection mechanisms, several vaccine candidates are under development and some are currently in various phases of clinical trials. CONCLUSION: This review describes potential therapeutic agents, including antiviral agents, biologic agents, anti-inflammatory agents, and herbal agents in the treatment of COVID-19 patients. In addition to reviewing the vaccine candidates that entered phases 4, 3, and 2/3 clinical trials, this review also discusses the various platforms that are used to develop the vaccine COVID-19.

Plasmonic photothermal therapy in the near-IR region using gold nanostars.

Photothermal therapy using nanoparticles is a prominent technique for cancer treatment. The principle is to maximize the heat conversion efficiency using plasmonic nanoparticle-light interaction. Due to their unique optical characteristics derived from their anisotropic structure, gold nanostars (GNSs) have gotten significant attention in photothermal therapy. To design a proper cancer treatment, it is vital to study the thermal effect induced close to the gold nanoparticles, in the vicinity, and the cancerous tissue. A temperature-dependent 2D model based on finite element method models is commonly used to simulate near-IR tumor ablation. The bioheat equation describes the photothermal effect within the GNSs and the environment. Surface cooling and heating strategies, such as the periodical heating method and a reduced laser irradiation area, were investigated to address surface overheating problems. We also determined that the optimal laser radius depends on tumor aspect ratio and laser intensity. Our results provide guidelines to evaluate a safe and feasible temperature range, treatment time, optimal laser intensity, and laser radius to annihilate a tumor volume.

In vitro efficacy of albendazole-loaded ß-cyclodextrin against protoscoleces of Echinococcus granulosus sensu stricto.

BACKGROUND: Cystic echinococcosis (CE), a widespread helminthic disease caused by the larval stage of the dog tapeworm Echinococcus granulosus represents a public health concern in humans. Albendazole (ABZ) is the first-line treatment for CE; however therapeutic failure of ABZ against CE occurs because of size and location of formed cysts as well its low aqueous solubility and consequently its erratic bioavailability in plasma. Serious adverse effects have also been observed following the long-term use of ABZ in vivo. METHODS: We evaluated the apoptotic effects of ABZ-loaded ß-cyclodextrin (ABZ-ß-CD) against protoscoleces (PSCs) versus ABZ alone. After 15 h of exposure, Caspase-3 enzymatic activity was determined by fluorometric assay in PSCs treated with ABZ and ABZ-ß-CD groups. To assess the treatment efficacy of ABZ-ß-CD against PSCs, mRNA expression of Arginase (EgArg) and Thioredoxin peroxidase (EgTPx) were quantified by Real-time PCR. RESULTS: A significant scolicidal activity of ABZ was observed only at a concentration of 800 µg/mL (100% PSCs mortality rate after 4 days of exposure), while the 200 and 400 µg/mL ABZ reached 100% PSCs mortality rate after 9 sequential days. The 400 µg/mL ABZ-ß-CD had 100% scolicidal rate after 5 days of exposure. Morphological alterations using scanning electron microscopy in treated PSCs revealed that 400 µg/mL ABZ-ß-CD induced higher Caspase-3 activity than their controls, indicating a more potent apoptotic outcome on the PSCs. Also, we showed that the 400 µg/mL ABZ-ß-CD can down-regulate the mRNA expression of EgArg and EgTPx, indicating more potent interference with growth and antioxidant properties of PSCs. CONCLUSIONS: In the present study, a significant scolicidal rate, apoptosis intensity and treatment efficacy was observed in PSCs treated with 400 µg/mL ABZ-ß-CD compared to ABZ alone. This provides new insights into the use of nanostructured ß-CD carriers with ABZ as a promising candidate to improve the treatment of CE in in vivo models.

Assessment of tricalcium phosphate/titanium dioxide (TCP/TiO2) nanocomposite scaffold compared with bone autograft and hydroxyapatite (HA) on the healing of segmental femur bone defect in rabbits.

Bone healing is a tissue process after a surgical operation. Many formulated materials have been designed for improving these procedures. The purpose of this study was to evaluate the effectiveness of nanocomposite tricalcium phosphate scaffolds combined with Titanium dioxide scaffold (TCP/TiO2) for femoral defects regeneration in rabbits. We studied 80 mature male New Zealand white rabbits weighing between 3 and 3.5 kg. Rabbits were subdivided into four groups. Anesthesia was performed before surgical operation by 50 mg/kg Ketamine 10% and 5 mg/kg xylazine 5% intramuscularly. We inducted a 6 × 5 mm diameter cylinder defect on the femur. Animals were separated into four trial groups of 20 animals each. After defecting, the experimental groups include control, autograft, hydroxyapatite, and TCP/TiO2 (received pure nanocomposite TCP/TiO2 material). A pathologist evaluated the sections on days 15, 30, 45, and 60 after surgery. The improvement of new and lamellar bone formation was the best in the nanocomposite TCP/TiO2 group at various point times, especially 60 days after surgery. We found that TCP/TiO2 nanocomposite has a significant improving function in the remodeling of bone in the defect areas. Graphical abstract.

Antibacterial activity of green gold and silver nanoparticles using ginger root extract.

Recent studies demonstrated that the speed of synthesis, biocompatibility, and antimicrobial activity of gold (Au) and silver (Ag) metals is enhanced when biosynthesized in nano-sized particles. In the present study, Au- and Ag-based nanoparticles (NPs) were synthesized via a biological process using aqueous Ginger root extract and characterized by various spectroscopic methods. The NPs have hexagonal and spherical shapes. The average particle size for Au and Ag NPs was 20 and 15 nm, respectively. The dynamic light scattering (DLS) technique has shown that the zeta potential values of synthesized NPs were 4.8 and - 7.11 mv, respectively. Gas chromatography-mass spectrometry (GC-MS) analysis of Ginger root extract revealed 25 compounds. The synthesized NPs showed significant activity against Staphylococcus aureus and Escherichia (E). coli in vitro, with IC50 and IC90 values for Au and Ag NPs, respectively, noted to be 7.5 and 7.3 µg/ml and 15 and 15.2 µg/ml for both bacterial strains. The protein leakage level was tremendous and morphological changes occurred in bacteria treated with biosynthesized NPs. These results suggest that the biosynthesized metallic NPs have the suitable potential for application as antibacterial agents with enhanced activities.

Targeted nanomedicines for the treatment of bone disease and regeneration.

Targeted delivery by either passive or active targeting of therapeutics to the bone is an attractive treatment for various bone related diseases such as osteoporosis, osteosarcoma, multiple myeloma, and metastatic bone tumors. Engineering novel drug delivery carriers can increase therapeutic efficacy and minimize the risk of side effects. Developmnet of nanocarrier delivery systems is an interesting field of ongoing studies with opportunities to provide more effective therapies. In addition, preclinical nanomedicine research can open new opportunities for preclinical bone-targeted drug delivery; nevertheless, further research is needed to progress these therapies towards clinical applications. In the present review, the latest advancements in targeting moieties and nanocarrier drug delivery systems for the treatment of bone diseases are summarized. We also review the regeneration capability and effective delivery of nanomedicines for orthopedic applications.

Electrospun polyurethane/poly (ɛ-caprolactone) nanofibers promoted the attachment and growth of human endothelial cells in static and dynamic culture conditions.

In this study, the angiogenic capacity of human endothelial cells was studied after being plated on the surface of polyurethane-poly caprolactone (PU/PCL) scaffolds for 72 h. In this study, cells were designated into five different groups, including PU, PU/PCL (2:1), PU/PCL (1:1); PU/PCL (1:2); and PCL. Data revealed that the PU/PCL (2:1) composition had a higher modulus and breakpoint in comparison with the other groups (p < 0.05). Compared to the other groups, the PU/PCL scaffold with a molar ratio of 2:1 had lower the contact angle θ and higher tensile stress (p < 0.05). The mean size of the PU nanofibers was reduced after the addition of PCL (p < 0.05). Based on our data, the culture of endothelial cells on the surface of PU/PCL (2:1) did not cause nitrosative stress and cytotoxic effects under static conditions compared to cells plated on a conventional plastic surface (p > 0.05). Based on data from the static condition, we fabricated a tubular PU/PCL (2:1) construct for six-day dynamic cell culture inside loop air-lift bioreactors. Scanning electron microscopy showed the attachment of endothelial cells to the luminal surface of the PU/PCL scaffold. Cells were flattened and aligned under the culture medium flow. Immunofluorescence imaging showed the attachment of cells to the luminal surface indicated by blue nuclei on the luminal surface. These data demonstrated that the application of PU/PCL substrate could stimulate endothelial cells activity under static and dynamic conditions.

Psychometric properties of the Persian version of the weight-related experiential avoidance (AAQW): overweight and obese treatment seeker at the clinical setting.

BACKGROUND: The present study aimed to investigate the psychometric properties of the Persian version of the weight-related experiential avoidance (AAQW) in overweight and obese treatment seeker in the clinical setting. METHODS: This sample consists of 220 male and female overweight or obesity treatment seeker from Overweight and obesity centers who agreed to fill out the self-reported measures. RESULTS: Confirmatory factor analysis (CFA) supported 3-factor structures of AAQW, including (weight as a barrier to living, Food as Control, and weight-stigma). Furthermore, the internal consistency of AAQW indicates an acceptable range (α = .70); Also, expected associations between AAQW and external correlates (e.g., BES, AAQ-II, KIMS, BDI-II, and CFQ) supported the measure's convergent validity in a sample of overweight and obese treatment seeker in the clinical setting. CONCLUSIONS: Overall, our study offers that the Persian version of weight-related experiential avoidance has psychometrically valid and reliable tools to assess experiential avoidance. Furthermore, weight-related experiential avoidance is associated with higher severity of binge eating symptoms, higher psychological inflexibility levels, experiential avoidance, and more cognitive fusion and depression symptomology.

An improved method in fabrication of smart dual-responsive nanogels for controlled release of doxorubicin and curcumin in HT-29 colon cancer cells.

The combination therapy which has been proposed as the strategy for the cancer treatment could achieve a synergistic effect for cancer therapies and reduce the dosage of the applied drugs. On account of the the unique properties as the high absorbed water content, biocompatibility, and flexibility, the targeting nanogels have been considred as a suitable platform. Herein, a non-toxic pH/thermo-responsive hydrogel P(NIPAAm-co-DMAEMA) was synthesized and characterized through the free-radical polymerization and expanded upon an easy process for the preparation of the smart responsive nanogels; that is, the nanogels were used for the efficient and controlled delivery of the anti-cancer drug doxorubicin (DOX) and chemosensitizer curcumin (CUR) simultaneously like a promising strategy for the cancer treatment. The size of the nanogels, which were made, was about 70 nm which is relatively optimal for the enhanced permeability and retention (EPR) effects. The DOX and CUR co-loaded nanocarriers were prepared by the high encapsulation efficiency (EE). It is important to mention that the controlled drug release behavior of the nanocarriers was also investigated. An enhanced ability of DOX and CUR-loaded nanoformulation to induce the cell apoptosis in the HT-29 colon cancer cells which represented the greater antitumor efficacy than the single-drug formulations or free drugs was resulted through the In vitro cytotoxicity. Overall, according to the data, the simultaneous delivery of the dual drugs through the fabricated nanogels could synergistically potentiate the antitumor effects on the colon cancer (CC).

Retraction Note to: Synthesis, characterization and in vitro studies of doxorubicin-loaded magnetic nanoparticles grafted to smart copolymers on A549 lung cancer cell line.

The Editors have retracted this article [1] because Figs. 6a and 6c have been used in three other publications to represent scanning electron micrographs of different nanoparticles [2-4]. The data reported in this article are therefore unreliable. In addition, Fig. 3 was reproduced from [5] with retrospective permission and the credit line should read as follows: "Reprinted from Acta Biomaterialia, Volume 3, Zhang, J. and Misra, R.D.K., Magnetic drug-targeting carrier encapsulated with thermosensitive smart polymer: core-shell nanoparticle carrier and drug release response, pp. 838-850, copyright (2007) with permission from Acta Materialia Inc. Authors Abolfazl Akbarzadeh, Maryam Anzaby, Soodabeh Davaran, Sang Woo Joo and Mohammad Samiei agree to this retraction. Authors Younes Hanifehpour and Hamid Tayefi Nasrabadi have not responded to any correspondence about this retraction.

Therapeutic efficacy of nanocompounds in the treatment of cystic and alveolar echinococcoses: challenges and future prospects.

Echinococcus granulosus sensu lato and E. multilocularis are the causative agents of life-threatening cystic and alveolar echinococcoses (CE and AE), respectively, which lead to serious public health concerns across the globe. Benzimidazoles (BMZs) are the drugs of choice for the treatment of human CE and AE. Presently, the chemotherapeutic failures of BMZs against CE and AE are caused by their low aqueous solubility, poor absorption, and consequently their erratic bioavailability. Among the BMZ compounds used for CE/AE treatment, albendazole (ABZ) and mebendazole (MBZ) are the only drugs licensed for human use. Nevertheless, the administration of these BMZs for a long period of time leads to undesirable adverse effects. Therefore, there is an urgent need for designing new formulations of BMZs with increased bioavailability. To bridge these therapeutic gaps, nanoparticle enantiomers of ABZ and drug delivery systems based on nanostructured entities currently provide an interesting new formulation of already existing drugs to improve the pharmacokinetic effects of BMZs. This study provides an overview of the tested nanocompounds against E. granulosus and E. multilocularis, including their effective dose, type of nanoparticles (NPs), assay setting, and therapeutic outcomes. This review suggests that BMZ derivatives loaded in NPs can significantly improve the scolicidal and cysticidal activities compared with single BMZ. Moreover, BMZ-loaded polymeric NPs show a tendency to increase mortality rate against protoscoleces and microcysts compared with metallic formulations, nanoemulsions, lipid nanocapsules, solid lipid NPs, liposomes, and nanocrystals. In the future, the use of the newly structured entities, attained by bridging ligands to the modified surface of NPs, as well as the electromagnetically produced nanodrugs could be helpful for developing fine-tuned formulations as an alternative to the already existing drugs against these neglected parasitic infections.

Reversion of Multidrug Resistance by Co-Encapsulation of Doxorubicin and Metformin in Poly(lactide-co-glycolide)-d-α-tocopheryl Polyethylene Glycol 1000 Succinate Nanoparticles.

PURPOSE: P-glycoprotein (P-gp) mediated multidrug resistance (MDR) has been recognized as the main obstacle against successful cancer treatment. To address this problem, co-encapsulated doxorubicin (DOX) and metformin (Met) in a biodegradable polymer composed of poly(lactide-co-glycolide) (PLGA) and D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) was prepared. We reported in our previous study that Met inhibits P-gp in DOX resistant breast cancer (MCF-7/DOX) cells. TPGS is a bioactive compound which has also been shown to inhibit P-gp, further to its pharmaceutical advantages. METHODS: The DOX/Met loaded PLGA-TPGS nanoparticles (NPs) were prepared by double emulsion method and characterized for their surface morphology, size and size distribution, and encapsulation efficiencies of drugs in NPs. RESULTS: All NPs were found to be spherical-shaped with the size distribution below 100 nm and encapsulation efficiencies were 42.26 ± 2.14% for DOX and 7.04 ± 0.52% for Met. Dual drug loaded NPs showed higher cytotoxicity and apoptosis in MCF-7/DOX cells in comparison to corresponding free drugs. The higher cytotoxicity of dual drug loaded NPs was attributed to the enhanced intracellular drug accumulation due to enhanced cellular uptake and reduced drug efflux which was obtained by combined effects of Met and TPGS in reducing cellular ATP content and inhibiting P-gp. CONCLUSION: Simultaneous delivery of DOX and Met via PLGA-TPGS NPs would be a promising approach to overcome MDR in breast cancer chemotherapy.

Next-generation sequencing approaches for the study of genome and epigenome toxicity induced by sulfur mustard.

Sulfur mustard (SM) is an extensive nucleophilic and alkylating agent that targets different tissues. The genotoxic property of SM is the most threatening effect, because it is associated with detrimental inflammations and susceptibility to several kinds of cancer. Moreover, SM causes a wide variety of adverse effects on DNA which result in accumulation of DNA adducts, multiple mutations, aneuploidies, and epigenetic aberrations in the genome. However, these adverse effects are still not known well, possibly because no valid biomarkers have been developed for detecting them. The advent of next-generation sequencing (NGS) has provided opportunities for the characterization of these alterations with a higher level of molecular detail and cost-effectivity. The present review introduces NGS approaches for the detection of SM-induced DNA adducts, mutations, chromosomal structural variation, and epigenetic aberrations, and also comparing and contrasting them with regard to which might be most advantageous.

pH- and thermo-sensitive MTX-loaded magnetic nanocomposites: synthesis, characterization, and in vitro studies on A549 lung cancer cell and MR imaging.

In the current study, we proposed a facile method for fabrication of multifunctional pH- and thermo-sensitive magnetic nanocomposites (MNCs) as a theranostic agent for using in targeted drug delivery and magnetic resonance imaging (MRI). To this end, we decorated Fe3O4 magnetic nanoparticles (MNPs) with N,N-dimethylaminoethyl methacrylate (DMAEMA) and N-isopropylacrylamide (NIPAAm), best known for their pH- and thermo-sensitive properties, respectively. We also conjugated mesoporous silica nanoparticles (MSNs) to polymer matrix acting as drug container to enhance the drug encapsulation efficacy. Methotroxate (MTX) as a model drug was successfully loaded in MNCs (M-MNCs) via surface adsorption onto MSNs and electrostatic interaction between drug and carrier. The pH- and temperature-triggered release of MTX was concluded through the evaluation of in vitro release at both physiological and simulated tumor tissue conditions. Based on in vitro cytotoxicity assay results, M-MNCs significantly revealed higher antitumor activity compared to free MTX. In vitro MR susceptibility experiment showed that M-MNCs relatively possessed high transverse relaxivity (r2) of about 0.15 mM-1·ms-1 and a linear relationship between the transverse relaxation rate (R2) and the Fe concentration in the M-MNCs was also demonstrated. Therefore, the designed MNCs can potentially become smart drug carrier, while they also can be promising MRI negative contrast agent.

Secretory phospholipase-A2 and fatty acid composition in oral reactive lesions: a cross-sectional study.

BACKGROUND: Oral reactive lesions are the most common lesions of oral cavity. Phospholipases and fatty acids play key roles in the creation of inflammation by change in metabolic activities and production of lipid mediators. The aim of this study was to investigate the amount of secretory phospholipase-A2 (sPLA2) and difference of fatty acid pattern in oral reactive hyperplasia and adjacent normal appearing tissues in patients with oral reactive lesions. METHODS: Paired samples of oral hyperplastic (OH) and adjacent normal-appearing tissue of 45 patients were investigated in this study. The collected samples were analyzed with enzymatic spectrophotometric method in terms of the amount of sPLA2 and composition of fatty acids by gas-liquid chromatography method. RESULTS: The amount of sPLA2 (1.8-fold, p < 0.001), stearic acid (1.2-fold, p < 0.001), oleic acid (1.1-fold, p = 0.01), arachidonic acid (1.5-fold, p < 0.001) and docosahexaenoic acid (1.3-fold, p = 0.02) were increased, while the amount of palmitoleic acid (-45%, p < 0.001) and linoleic acid (-19%, p < 0.001) were reduced in the OH tissue samples. Furthermore, the results demonstrated significant associations between the type and location of tissue samples with monounsaturated fatty acids (MUFAs) and n-3 polyunsaturated fatty acids. Tissue samples from patients with inflammatory fibroepithelial hyperplasia showed relatively higher MUFAs and lower n-3 polyunsaturated fatty acids than other type of lesions. CONCLUSIONS: Localized changes in the sPLA2 activity and composition of fatty acid are associated with oral reactive hyperplasia and the type of pathological response. We suggest that sPLA2 activity and multiple type of fatty acids might be used as potential therapeutic target for oral reactive hyperplasia.

Profiling of Compositions of Essential Oils and Volatiles of Salvia limbata Using Traditional and Advanced Techniques and Evaluation for Biological Activities of Their Extracts.

In the present work, the essential oils and volatiles from flowers, leaves, and stems of Salvia limbata obtained using microwave-assisted hydrodistillation, solvent-free microwave extraction, headspace-assisted analysis, and headspace-solid phase microextraction have been characterized for the first time. The results have been also compared with those from traditional separation techniques involving hydrodistillation and steam distillation. Regardless of some common compounds in all of the profiles, some dissimilarities were noted due to the use of different extracting approaches. Taking into account the chemical categories, sesquiterpene hydrocarbons were found as the most represented group of natural compounds contributing to the chemical profiles. It was also noted that the methanol extracts obtained from the flowers of Sal. limbata showed a desirable antioxidant activity, comparable to the standard antioxidant butylated hydroxytoluene. Furthermore, using the disc diffusion and broth microdilution methods, all the tested bacteria demonstrated weak to moderate and moderate to strong sensibilities to the MeOH extracts obtained from different plant parts of Sal. limbata.

Fluorescent multi-responsive cross-linked P(N-isopropylacrylamide)-based nanocomposites for cisplatin delivery.

Magnetic, pH and temperature-sensitive, poly(N-isopropylacrylamide) (PNIPAM)-based nanocomposites with fluorescent properties were synthesized by free radical copolymerization-cross linking of NIPAM, N,N-dimethylaminoethyl methacrylate (DMAEMA) and 4-acrylamidofluorescein (AFA). The model anti-cancer drug, cisplatin (CDDP), was loaded into the resulted nanogel. For the production of CDDP-loaded nanocomposite, Fe3O4 magnetic nanoparticles (MNPs) and CDDP were loaded into the nanogel. Field-emission scanning electron microscopy (FE-SEM) indicated that the size of nanogel and CDDP-loaded nanocomposite were about 90 and 160 nm, respectively. The encapsulation efficiency of CCDP was found up to 65%. The loaded CCDP showed sustained thermal and pH-responsive drug release. A high level of drug release was observed under the conditions of low pH and high temperature. The lower critical solution temperature (LCST) of synthesized nanogel was about 40 °C. CDDP-loaded nanocomposite showed a volume phase transition from 282 to 128 nm at its LCST. Accordingly, in this study, the synthesized nanocomposite can be employed as a stimuli-responsive anti-cancer drug delivery system and the pH and temperature of solution have the potential to monitor the drug release.

Synthesis of sharply thermo and PH responsive PMA-b-PNIPAM-b-PEG-b-PNIPAM-b-PMA by RAFT radical polymerization and its schizophrenic micellization in aqueous solutions.

Sharply thermo- and pH-responsive pentablock terpolymer with a core-shell-corona structure was prepared by RAFT polymerization of N-isopropylacrylamide and methacrylic acid monomers using PEG-based benzoate-type of RAFT agent. The PEG-based RAFT agent could be easily synthesized by dihydroxyl-capped PEG with 4-cyano-4-(thiobenzoyl) sulfanylpentanoic acids, using esterification reaction. This pentablock terpolymer was characterized by 1H NMR, FT-IR, and GPC. The PDI was obtained by GPC, indicating that the molecular weight distribution was narrow and the polymerization was well controlled. The thermo- and pH-responsive micellization of the pentablock terpolymer in aqueous solution was investigated using fluorescence spectroscopy technique, UV-vis transmittance, and TEM. The LCST of pentablock terpolymer increased (over 50 °C) compared to the NIPAM homopolymer (~32 °C), due to the incorporation of the hydrophilic PEG and PMA blocks in pentablock terpolymer (PNIPAM block as the core, PEG the block and the hydrophilic PMA block as the shell and the corona). Also, pH-dependent phase transition behavior shows at a pH value of about ~5.8, according to pKa of MAA. Thus, in acidic solution at room temperature, the pentablock terpolymer self-assembled to form core-shell-corona micelles, with the hydrophobic PMA block as the core, the PNIPAM block and the hydrophilic PEG block as the shell and the corona, respectively.