RESUMO
BACKGROUND: World Health Organization expert groups recommended mortality trials of four repurposed antiviral drugs - remdesivir, hydroxychloroquine, lopinavir, and interferon beta-1a - in patients hospitalized with coronavirus disease 2019 (Covid-19). METHODS: We randomly assigned inpatients with Covid-19 equally between one of the trial drug regimens that was locally available and open control (up to five options, four active and the local standard of care). The intention-to-treat primary analyses examined in-hospital mortality in the four pairwise comparisons of each trial drug and its control (drug available but patient assigned to the same care without that drug). Rate ratios for death were calculated with stratification according to age and status regarding mechanical ventilation at trial entry. RESULTS: At 405 hospitals in 30 countries, 11,330 adults underwent randomization; 2750 were assigned to receive remdesivir, 954 to hydroxychloroquine, 1411 to lopinavir (without interferon), 2063 to interferon (including 651 to interferon plus lopinavir), and 4088 to no trial drug. Adherence was 94 to 96% midway through treatment, with 2 to 6% crossover. In total, 1253 deaths were reported (median day of death, day 8; interquartile range, 4 to 14). The Kaplan-Meier 28-day mortality was 11.8% (39.0% if the patient was already receiving ventilation at randomization and 9.5% otherwise). Death occurred in 301 of 2743 patients receiving remdesivir and in 303 of 2708 receiving its control (rate ratio, 0.95; 95% confidence interval [CI], 0.81 to 1.11; P = 0.50), in 104 of 947 patients receiving hydroxychloroquine and in 84 of 906 receiving its control (rate ratio, 1.19; 95% CI, 0.89 to 1.59; P = 0.23), in 148 of 1399 patients receiving lopinavir and in 146 of 1372 receiving its control (rate ratio, 1.00; 95% CI, 0.79 to 1.25; P = 0.97), and in 243 of 2050 patients receiving interferon and in 216 of 2050 receiving its control (rate ratio, 1.16; 95% CI, 0.96 to 1.39; P = 0.11). No drug definitely reduced mortality, overall or in any subgroup, or reduced initiation of ventilation or hospitalization duration. CONCLUSIONS: These remdesivir, hydroxychloroquine, lopinavir, and interferon regimens had little or no effect on hospitalized patients with Covid-19, as indicated by overall mortality, initiation of ventilation, and duration of hospital stay. (Funded by the World Health Organization; ISRCTN Registry number, ISRCTN83971151; ClinicalTrials.gov number, NCT04315948.).
Assuntos
Monofosfato de Adenosina/análogos & derivados , Alanina/análogos & derivados , Antivirais/uso terapêutico , Tratamento Farmacológico da COVID-19 , Hidroxicloroquina/uso terapêutico , Interferon beta-1a/uso terapêutico , Lopinavir/uso terapêutico , Monofosfato de Adenosina/uso terapêutico , Idoso , Alanina/uso terapêutico , Antivirais/administração & dosagem , Antivirais/efeitos adversos , COVID-19/mortalidade , Quimioterapia Combinada , Feminino , Mortalidade Hospitalar , Hospitalização , Humanos , Análise de Intenção de Tratamento , Estimativa de Kaplan-Meier , Tempo de Internação , Masculino , Pessoa de Meia-Idade , Respiração Artificial , Falha de TratamentoRESUMO
In this approach, zinc oxide (ZnO) is a multipurpose substance with remarkable characteristics such as high sensitivity, a large specific area, non-toxicity, excellent compatibility, and a high isoelectric point, which make it attractive for discussion with some limitations. It is the most favorable possible option for the collection of nanostructures in terms of structure and their characteristics. The development of numerous ZnO nanostructure-based electrochemical sensors and biosensors used in health diagnosis, pharmaceutical evaluation, food hygiene, and contamination of the environment monitoring is described, as well as the production of ZnO nanostructures. Nanostructured ZnO has good chemical and temperature durability as an n-type semiconducting material, making it useful in a wide range of uses, from luminous materials to supercapacitors, batteries, solar cells, photocatalysis, biosensors, medicinal devices, and more. When compared to the bulk materials, the nanosized materials have both a higher rate of disintegration and a higher solubility. Furthermore, ZnO nanoparticles are regarded as top contenders for electrochemical sensors due to their strong electrochemical behaviors and electron transmission characteristics. The impact of many factors, including selectivity, sensitivity, detection limit, strength, and structures, arrangements, and their respective functioning processes, has been investigated. This study concentrated a substantial amount of its attention on the recent advancements that have been made in ZnO-based nanoparticles, composites, and modified materials for use in the application areas of energy storage and conversion devices as well as biological applications. Supercapacitors, Li-ion batteries, dye-sensitized solar cells, photocatalysis, biosensors, medicinal, and biological systems have been studied. ZnO-based materials are constantly analyzed for their advantages in energy and life science applications.
RESUMO
In recent years, a new class of highly crystalline advanced permeable materials covalent-organic frameworks (COFs) have garnered a great deal of attention thanks to their remarkable properties, such as their large surface area, highly ordered pores and channels, and controllable crystalline structures. The lower physical stability and electrical conductivity, however, prevent them from being widely used in applications like photocatalytic activities and innovative energy storage and conversion devices. For this reason, many studies have focused on finding ways to improve upon these interesting materials while also minimizing their drawbacks. This review article begins with a brief introduction to the history and major milestones of COFs development before moving on to a comprehensive exploration of the various synthesis methods and recent successes and signposts of their potential applications in carbon dioxide (CO2 ) sequestration, supercapacitors (SCs), lithium-ion batteries (LIBs), and hydrogen production (H2 -energy). In conclusion, the difficulties and potential of future developing with highly efficient COFs ideas for photocatalytic as well as electrochemical energy storage applications are highlighted.
RESUMO
Wastewater irrigation for vegetable cultivation is greatly concerned about the presence of toxic metals in irrigated soil and vegetables which causes possible threats to human health. This study aimed to ascertain the accumulation of heavy metals (HMs) in edible parts of vegetables irrigated with different stages of textile dyeing wastewater (TDW). Bio-concentration factor (BCF), Estimated daily intake (EDI), and target hazard quotient (THQ) were computed to estimate human health risks and speculate the hazard index (HI) of adults and children with the consumption of HMs contaminated vegetables at recommended doses. Five vegetables (red amaranth, Indian spinach, cauliflower, tomato, and radish) in a pot experiment were irrigated with groundwater (T1) and seven stages of TDW (T2â¼T8) following a randomized complete block design (RCBD) with three replications. Among the TDW stages, T8, T7, T4, and T5 exhibited elevated BCF, EDI, THQ, and HI due to a rising trend in the accumulation of Pb, Cd, Cr, and Ni heavy metals in the edible portion of the red amaranth, followed by radish, Indian spinach, cauliflower, and tomato. The general patterns of heavy metal (HM) accumulation, regarded as vital nutrients for plants, were detected in the following sequence: Zn > Mn/Cu > Fe. Conversely, toxic metals were found to be Cd/Cr > Ni > Pb, regardless of the type of vegetables. Principal Component Analysis (PCA) identified T8, T7, and T4 of TDW as the primary contributors to the accumulation of heavy metals in the vegetables examined. Furthermore, the analysis of the heavy metals revealed that the BCF, THQ, and HI values for all studied metals were below 1, except for Pb. This suggests that the present consumption rates of different leafy and non-leafy vegetables, whether consumed individually or together, provide a low risk in terms of heavy metal exposure. Nevertheless, the consumption of T8, T7, and T4 irrigated vegetables, specifically Indian spinach alone or in combination with red amaranth and radish, by both adults and children, at the recommended rate, was found to pose potential health risks. On the other hand, T2, T3, and T6 irrigated vegetables were deemed safe for consumption. These findings indicated that the practice of irrigating the vegetables with T8, T7, and T4 stages of TDW has resulted in a significant buildup of heavy metals in the soils and edible parts of vegetables which are posing health risks to adults and children. Hence, it is imperative to discharge the T8, T7, and T4 stages of TDW after ETP to prevent the contamination of vegetables and mitigate potential health risks.
Assuntos
Metais Pesados , Poluentes do Solo , Solanum lycopersicum , Adulto , Criança , Humanos , Cádmio , Monitoramento Ambiental , Contaminação de Alimentos/análise , Chumbo , Metais Pesados/análise , Medição de Risco , Solo , Poluentes do Solo/análise , Verduras , Águas ResiduáriasRESUMO
Letrozole (LTZ) is used as first-line treatment for hormone-positive breast cancer (BC) in postmenopausal women. However, its poor aqueous solubility and permeability have reduced its clinical efficacy. Herein, we developed LTZ-nanotransferosomes (LTZ-NT) to address above mentioned issues. The LTZ-NT were optimized statistically using Design Expert® followed by their characterization via dynamic light scattering (DLS), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and Differential scanning calorimetry (DSC). The optimized LTZ-NT was incorporated into 1% chitosan-gel to develop LTZ-NTG. Moreover, in vitro drug release and ex vivo permeation of LTZ-NTG were performed and compared with LTZ-dispersion and LTZ-NT. Additionally, skin irritability and histopathology of LTZ-NTG were investigated. Furthermore, in vitro antitumor study of LTZ-NTG was investigated in BC cell lines. The optimized LTZ-NT showed suitable zeta potential (30.4 mV), spherical size (162.5 nm), and excellent entrapment efficiency (88.04%). Moreover, LTZ-NT exhibited suitable thermal behavior and no interactions among its excipients. In addition, LTZ-NTG had an optimal pH (5.6) and a suitable viscosity. A meaningfully sustained release and improved permeation of LTZ was observed from LTZ-NTG. Additionally, LTZ-NTG showed significantly enhanced cell death of MCF-7 and MCC-7 cells. It can be concluded that LTZ-NTG has the potential to deliver chemotherapeutic agents for possible treatment of BC.
RESUMO
Dopant-free hole transporting materials (HTMs) is significant to the stability of perovskite solar cells (PSCs). Here, we developed a novel star-shape arylamine HTM, termed Py-DB, with a pyrene core and carbon-carbon double bonds as the bridge units. Compared to the reference HTM (termed Py-C), the extension of the planar conjugation backbone endows Py-DB with typical intermolecular π-π stacking interactions and excellent solubility, resulting in improved hole mobility and film morphology. In addition, the lower HOMO energy level of the Py-DB HTM provides efficient hole extraction with reduced energy loss at the perovskite/HTM interface. Consequently, an impressive power conversion efficiency (PCE) of 24.33 % was achieved for dopant-free Py-DB-based PSCs, which is the highest PCE for dopant-free small molecular HTMs in n-i-p configured PSCs. The dopant-free Py-DB-based device also exhibits improved long-term stability, retaining over 90 % of its initial efficiency after 1000â h exposure to 25 % humidity at 60 °C. These findings provide valuable insights and approaches for the further development of dopant-free HTMs for efficient and reliable PSCs.
RESUMO
This article highlights novel prospects for metal-organic frameworks (MOFs) in heterogeneous catalysis as having frustrated Lewis acid-base pairs (FLPs) or as bifunctional acid-base solid catalysts able to activate molecular hydrogen. Starting from the extensive application MOFs as Lewis acid and Lewis base catalysts, this article uses catalytic hydrogenation to briefly summarize the efforts made to heterogenize boron and amine in MOFs to mimic molecular FLP systems. The core of this concept is based on recent findings which demonstrate the ability of two commonly used MOFs, namely UiO-66 and MIL-101, to catalyze the selective hydrogenation of polar double X=Y bonds at moderate H2 pressures below 10â bar. The influence of electron-donating, the withdrawal of substituents on the linker, and the aniline poisoning effect highlight the significance of Lewis acid sites, while density-functional theory calculations indicate the heterolytic H-H bond cleavage at the MOF metal oxo clusters. It is expected that this new perspective on MOFs as solid FLP systems will spur further research to explore and define the potential of dual sites in the catalytic activation of small molecules.
Assuntos
Estruturas Metalorgânicas , Ácidos de Lewis , Aminas , Boro , CatáliseRESUMO
Seawater electrolysis driven by renewable electricity is deemed a promising and sustainable strategy for green hydrogen production, but it is still formidably challenging. Here, we report an iron-doped NiS nanosheet array on Ni foam (Fe-NiS/NF) as a high-performance and stable seawater splitting electrocatalyst. Such Fe-NiS/NF catalyst needs overpotentials of only 420 and 270 mV at 1000 mA cm-2 for the oxygen evolution reaction and hydrogen evolution reaction in alkaline seawater, respectively. Furthermore, its two-electrode electrolyzer needs a cell voltage of 1.88 V for 1000 mA cm-2 with 50 h of long-term electrochemical durability in alkaline seawater. Additionally, in situ electrochemical Raman and infrared spectroscopy were employed to detect the reconstitution process of NiOOH and the generation of oxygen intermediates under reaction conditions.
RESUMO
Hydrogen production, catalytic organic synthesis, carbon dioxide reduction, environmental purification, and other major fields have all adopted photocatalytic technologies due to their eco-friendliness, ease of use, and reliance on sunlight as the driving force. Photocatalyst is the key component of photocatalytic technology. Thus, it is of utmost importance to produce highly efficient, stable, visible-light-responsive photocatalysts. CIS stands out among other visible-light-response photocatalysts for its advantageous combination of easy synthesis, non-toxicity, high stability, and suitable band structure. In this study, we took a brief glance at the synthesis techniques for CIS after providing a quick introduction to the fundamental semiconductor features, including the crystal and band structures of CIS. Then, we discussed the ways doping, heterojunction creation, p-n heterojunction, type-II heterojunction, and Z-scheme may be used to modify CIS's performance. Subsequently, the applications of CIS towards pollutant degradation, CO2 reduction, water splitting, and other toxic pollutants remediation are reviewed in detail. Finally, several remaining problems with CIS-based photocatalysts are highlighted, along with future potential for constructing more superior photocatalysts.
Assuntos
Poluentes Ambientais , Recuperação e Remediação Ambiental , Catálise , Luz , TecnologiaRESUMO
This paper presents a comprehensive study on the classification of brain tumor images using five pre-trained vision transformer (ViT) models, namely R50-ViT-l16, ViT-l16, ViT-l32, ViT-b16, and ViT-b32, employing a fine-tuning approach. The objective of this study is to advance the state-of-the-art in brain tumor classification by harnessing the power of these advanced models. The dataset utilized for experimentation consists of a total of 4855 images in the training set and 857 images in the testing set, encompassing four distinct tumor classes. The performance evaluation of each model is conducted through an extensive analysis encompassing precision, recall, F1-score, accuracy, and confusion matrix metrics. Among the models assessed, ViT-b32 demonstrates exceptional performance, achieving a high accuracy of 98.24% in accurately classifying brain tumor images. Notably, the obtained results outperform existing methodologies, showcasing the efficacy of the proposed approach. The contributions of this research extend beyond conventional methods, as it not only employs cutting-edge ViT models but also surpasses the performance of existing approaches for brain tumor image classification. This study not only demonstrates the potential of ViT models in medical image analysis but also provides a benchmark for future research in the field of brain tumor classification.
RESUMO
Diabetes is a chronic metabolic disorder of the endocrine system characterized by persistent hyperglycemia appears due to the deficiency or ineffective use of insulin. The glucose level of diabetic patients increases after every meal and medically recommended drugs are used to control hyperglycemia. Alpha-glucosidase inhibitors are used as antidiabetic medicine to delay the hydrolysis of complex carbohydrates. Acarbose, miglitol, and voglibose are commercial drugs but patients suffer side effects of flatulence, bloating, diarrhea, and loss of hunger. To explore a new antidiabetic drug, a series of benzotriazinone carboxamides was synthesized and their alpha-glucosidase inhibition potentials were measured using in vitro experiments. The compounds 14k and 14l were found to be strong inhibitors compared to the standard drug acarbose with IC50 values of 27.13 ± 0.12 and 32.14 ± 0.11 µM, respectively. In silico study of 14k and 14l was carried out using molecular docking to identify the type of interactions developed between these compounds and enzyme sites. Both potent compounds 14k and 14l exhibited effective docking scores by making their interactions with selected amino acid residues. Chemical hardness and orbital energy gap values were investigated using DFT studies and results depicted affinity of 14k and 14l towards biological molecules. All computational findings were found to be in good agreement with in vitro results.
RESUMO
Herein, interactions between cetylpyridinium chloride (CPC) and ceftriaxone sodium (CTS) were investigated applying conductivity technique. Impacts of the nature of additives (e.g. electrolytes or hydrotrope (HDT)), change of temperatures (from 298.15 to 323.15 K), and concentration variation of CTS/additives were assessed on the micellization of CPC + CTS mixture. The conductometric analysis of critical micelle concentration (CMC) with respect to the concentration reveals that the CMC values were increased with the increase in CTS concentration. In terms of using different mediums, CMC did not differ much with the increase in electrolyte salt (NaCl, Na2SO4) concentration, but increased significantly with the rise of HDT (NaBenz) amount. In the presence of electrolyte, CMC showed a gentle increment with temperature, while the HDT showed the opposite trend. Obtained result was further correlated with conventional thermodynamic relationship, where standard Gibb's free energy change (ΔGmo), change of enthalpy (ΔHmo), and change of entropy (ΔSmo) were utilized to investigate. The ΔGmo values were negative for all the mixed systems studied indicating that the micellization process was spontaneous. Finally, the stability of micellization was studied by estimating the intrinsic enthalpy gain (ΔHmo,∗) and compensation temperature (Tc). Here, CPC + CTS mixed system showed more stability in Na2SO4 medium than the NaCl, while in NaBenz exhibited the lowest stability.
RESUMO
A series of 4-((4-methylphenylsulfonamido)methyl)cyclohexanecarboxylic acid (NaMSCCA) transition metal complexes [Cu(II), Zn(II), Ni(II), Mn(II), and Co(II)] have been synthesized by precipitation method. The characterization was done by physical techniques, FT-IR spectroscopy, mass spectrometry, and NMR spectroscopy. The molecular structures of nickel (II) AZ-3 and cobalt (II) AZ-5 complexes were determined by the X-ray diffraction technique and found to crystallize in the triclinic space group P-1. The coordination geometry around the central nickel (AZ-3) and cobalt (AZ-5) atoms was square planar bipyramidal. Molecular docking was performed with duplex DNA of sequence d(CGCGAATTCGCG)2 DNA to determine the probable binding mode of compounds. Then these synthesized compounds were used to perform DNA cleavage activity through the agarose gel electrophoresis method. Among the compounds, compounds AZ-1 and AZ-2 exhibited good nuclease activity. The DNA sequence of breast-cancer suppressor gene 1 (BRCA1) was amplified through PCR and interaction studies of compounds AZ-1 and AZ-2 were performed through gel electrophoresis and fluorescence emission spectroscopy. The expression analysis of the BRCA1 gene was also performed to quantify the expression relative fold change (2^-(∆∆CT)) after treatment with compounds. All synthesized compounds were evaluated for their antioxidant and antiglycation activities and AZ-2 exhibited excellent results. The molecular docking study of these compounds was performed against the protein structure of advanced glycation end products to support the experimental results. Anticancer activity of compounds was performed through MTT assay. Copper and zinc complexes depicted the highest anticancer activity against human breast adenocarcinoma (MCF7) and human corneal epithelial cell (HCEC) cell lines.
Assuntos
Complexos de Coordenação , Humanos , Complexos de Coordenação/farmacologia , Complexos de Coordenação/química , Níquel/química , Simulação de Acoplamento Molecular , Sulfonamidas/farmacologia , Espectroscopia de Infravermelho com Transformada de Fourier , Genes BRCA1 , Cobalto/química , Cobre/química , DNA/química , Sulfanilamida , Ligantes , Proteína BRCA1RESUMO
Hybrid lead halide perovskite solar cells (PSCs) have emerged as potential competitors to silicon-based solar cells with an unprecedented increase in power conversion efficiency (PCE), nearing the breakthrough point toward commercialization. However, for hole-transporting materials, it is generally acknowledged that complex structures often create issues such as increased costs and hazardous substances in the synthetic schemes, when translated from the laboratory to manufacture on a large scale. Here, we present cyclobutane-based hole-selective materials synthesized using simple and green-chemistry inspired protocols in order to reduce costs and adverse environmental impact. A series of novel semiconductors with molecularly engineered side arms were successfully applied in perovskite solar cells. V1366-based PSCs feature impressive efficiency of 21 %, along with long-term operational stability under atmospheric environment. Most importantly, we also fabricated perovskite solar modules exhibiting a record efficiency over 19 % with an active area of 30.24â cm2 .
RESUMO
Hole-transporting materials (HTMs) based on the 10H, 10'H-9,9'-spirobi [acridine] core (BSA50 and BSA51) were synthesized, and their electronic properties were explored. Experimental and theoretical studies show that the presence of rigid 3,6-dimethoxy-9H-carbazole moieties in BSA 50 brings about improved hole mobility and higher work function compared to bis(4-methoxyphenyl)amine units in BSA51, which increase interfacial hole transportation from perovskite to HTM. As a result, perovskite solar cells (PSCs) based on BSA50 boost power conversion efficiency (PCE) to 22.65 %, and a PSC module using BSA50 HTM exhibits a PCE of 21.35 % (6.5×7â cm) with a Voc of 8.761â V and FF of 79.1 %. The unencapsulated PSCs exhibit superior stability to devices employing spiro-OMeTAD, retaining nearly 90 % of their initial efficiency after 1000â h operation output. This work demonstrates the high potential of molecularly engineered spirobi[acridine] derivatives as HTMs as replacements for spiro-OMeTAD.
RESUMO
It is of great importance to rationally design and develop earth-abundant nanocatalysts for high-efficiency water electrolysis. Herein, NiFe layered double hydroxide was in situ grown hydrothermally on a 3D graphite felt (NiFe LDH/GF) as a high-efficiency catalyst in facilitating the oxygen evolution reaction (OER). In 1.0 M KOH, NiFe LDH/GF requires a low overpotential of 214 mV to deliver a geometric current density of 50 mA cm-2 (η50 mA cm-2 = 214 mV), surpassing that NiFe LDH supported on a 2D graphite paper (NiFe LDH/GP; η50 mA cm-2 = 301 mV). More importantly, NiFe LDH/GF shows good durability at 50 mA cm-2 within 50 h of OER catalysis testing and delivers a faradaic efficiency of nearly 100% in the electrocatalysis of OER.
RESUMO
The simple one-step reaction of [60]fullerene with α-monosubstituted acetaldehydes and primary amines in the presence of Mn(OAc)3·2H2O under air conditions afforded a series of novel N-substituted fulleropyrrolines with trisubstituted CîC bonds in moderate to good yields. The addition of Mn(OAc)3·2H2O played a crucial role in the successful synthesis of N-aryl fulleropyrrolines with trisubstituted CîC bonds, which would be extremely difficult to prepare by known methods as a result of the decreased nucleophilicity of arylamines due to the p-π conjugation effect. Intriguingly, arylamines displayed abnormally higher reactivity as compared with non-arylamines in the current reaction system by the observation of obviously decreased equivalent of Mn(OAc)3·2H2O, higher product yields, and lower reaction temperature probably due to the radical reaction mechanism initiated by Mn(OAc)3·2H2O. On the basis of experimental observations, a plausible formation pathway for N-substituted fulleropyrrolines with trisubstituted CîC bonds was proposed to elucidate the above-mentioned reaction process.
RESUMO
Contagious diseases are the principal cause of mortality, particularly respiratory viruses, a real menace for public health and economic development worldwide. Therefore, timely diagnosis and treatments are the only life-saving strategy to overcome any epidemic and particularly the ongoing prevailing pandemic COVID-19 caused by SARS-CoV-2. A rapid identification, point of care, portable, highly sensitive, stable, and inexpensive device is needed which is exceptionally satisfied by sensor technology. Consequently, the researchers have directed their attention to employing sensors targeting multiple analyses of pathogenic detections across the world. Nanostructured materials (nanoparticles, nanowires, nanobundles, etc.), owing to their unique characteristics such as large surface-to-volume ratio and nanoscale interactions, are widely employed to fabricate facile sensors to meet all the immediate emerging challenges and threats. This review is anticipated to foster researchers in developing advanced nanomaterials-based sensors for the increasing number of COVID-19 cases across the globe. The mechanism of respiratory viral detection by nanomaterials-based sensors has been reported. Moreover, the advantages, disadvantages, and their comparison with conventional sensors are summarized. Furthermore, we have highlighted the challenges and future potential of these sensors for achieving efficient and rapid detection.
RESUMO
Starting from a [(MeO C^N^C)AuCl] complex as precursor, a direct substitution by C,H-activation from sp-, sp2 - or sp3 -C,H-bonds under basic conditions in a planetary ball mill was achieved. Because of the extraordinary photophysical properties of the target compounds, this protocol provides an easy access to a highly valued complex class. In contrast to existing protocols, no pre-functionalization of the starting materials is necessary and the use of expensive transition metal catalysts can be avoided, which makes this application appealing also for industrial purposes. In addition the methodology was not restricted to pincer complexes, which was demonstrated by the substitution of chelate type [(tpy)AuCl2 ] complexes.
RESUMO
Electrocatalytic two-electron oxygen reduction has emerged as a promising alternative to the energy- and waste-intensive anthraquinone process for distributed H2 O2 production. This process, however, suffers from strong competition from the four-electron pathway leading to low H2 O2 selectivity. Herein, we report using a superhydrophilic O2 -entrapping electrocatalyst to enable superb two-electron oxygen reduction electrocatalysis. The honeycomb carbon nanofibers (HCNFs) are robust and capable of achieving a high H2 O2 selectivity of 97.3 %, much higher than that of its solid carbon nanofiber counterpart. Impressively, this catalyst achieves an ultrahigh mass activity of up to 220â A g-1 , surpassing all other catalysts for two-electron oxygen reduction reaction. The superhydrophilic porous carbon skeleton with rich oxygenated functional groups facilitates efficient electron transfer and better wetting of the catalyst by the electrolyte, and the interconnected cavities allow for more effective entrapping of the gas bubbles. The catalytic mechanism is further revealed by in situ Raman analysis and density functional theory calculations.