RESUMO
The Zintl phase CaSi2 is a layered compound with stacking variants known as 1P, 3R, and 6R. We extend the series by the 21R polytype formed by rapid cooling of the melt. The crystal structure of 21R-CaSi2 (space group R3Ì m) was derived from HRTEM images, and the atomic positions were optimized by using the FPLO code (a = 3.868 Å, c = 107.276 Å). We explore polytype transformations by powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), electron backscattering diffraction (EBSD), and thermal analysis. While 6R-CaSi2 is thermodynamically stable at ambient conditions, nanosized impurities of silicon stabilize 3R-CaSi2 as a bulk phase.
RESUMO
Na2Ga7 crystallizes with the orthorhombic space group Pnma (no. 62; a = 14.8580(6) Å, b = 8.6766(6) Å, and c = 11.6105(5) Å; Z = 8) and constitutes a filled variant of the Li2B12Si2 structure type. The crystal structure consists of a network of icosahedral Ga12 units with 12 exohedral bonds and four-bonded Ga atoms in which the Na atoms occupy the channels and cavities. The atomic arrangement is consistent with the Zintl [(4b)Ga]- and Wade [(12b)Ga12]2- electron counting approach. The compound forms peritectically from Na7Ga13 and the melt at 501 °C and does not show a homogeneity range. The band structure calculations predict semiconducting behavior consistent with the electron balance [Na+]4[(Ga12)2-][Ga-]2. Magnetic susceptibility measurements show that Na2Ga7 is diamagnetic.
RESUMO
The metastable type-II clathrate Na24-δ Ge136 was obtained from Na12 Ge17 by applying a two-step procedure. At first, Na12 Ge17 was reacted at 70 °C with a solution of benzophenone in the ionic liquid (IL) 1,3-dibutyl-2-methylimidazolium-bis(trifluoromethylsulfonyl) azanide. The IL was inert towards Na12 Ge17 , but capable of dissolving the sodium salts formed in the redox reaction. By annealing at 340 °C under an argon atmosphere, the X-ray amorphous intermediate product was transformed to crystalline Na24-δ Ge136 (δ≈2) and α-Ge in an about 1 : 1 mass ratio. The product was characterized by X-ray powder diffraction, chemical analysis, and 23 Na solid-state NMR spectroscopy. Metallic properties of Na24-δ Ge136 were revealed by a significant Knight shift of the 23 Na NMR signals and by a Pauli-paramagnetic contribution to the magnetic susceptibility. At room temperature, Na24-δ Ge136 slowly ages, with a tendency to volume decrease and sodium loss.
RESUMO
Rb8B8Si38 forms under high-pressure, high-temperature conditions at p = 8 GPa and T = 1273 K. The new compound (space group Pm3Ì n, a = 9.9583(1) Å) is the second example for a clathrate-I borosilicide. The phase is inert against strong acids and bases and thermally stable up to 1300 K at ambient pressure. (Rb+)8(B-)8(Si0)38 is electronically balanced, diamagnetic, and shows semiconducting behavior with moderate Seebeck coefficient below 300 K. Chemical bonding analysis by the electron localizability approach confirms the description of Rb8B8Si38 as Zintl phase.
RESUMO
By using an anodic conversion process at 280 °C, the type II clathrates Na1.7(6)Ge136 and Na23.0(5)Ge136 were obtained from Na12Ge17 as the starting material. An alkali-metal iodide molten-salt electrolyte complied with the reaction conditions, allowing for the formation of microcrystalline products. Characterization by powder X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy also revealed Na4Ge13 as an intermediate and α-Ge and Cs8-xGe136 as byproducts, with the latter likely resulting from cation exchange between the starting material and electrolyte. Taking such minor side reactions and a small contribution of material without suitable electrical contact into account, anodic conversion of Na12Ge17 to Na1.7Ge136 proved to proceed without parasitic processes and to comprise the material bulk. The hitherto existing preparation method for Naxâ0Ge136 by gas-solid oxidation of Na12Ge17 has thus been translated into a scalable high-temperature electrochemical approach with enhanced tools for reaction control, promising access to pure Ge(cF136) and Na24Ge136 after process optimization.
RESUMO
The formation of framework vacancies in Si- and Ge-based type-I clathrates is studied using density-functional theory as a function of filling the cages with K and Ba atoms. Our analysis reveals the relevance of structural disorder, geometric relaxation, and electronic saturation as well as vibrational and configurational entropy. In the Si clathrates, we find that vacancies are unstable, but very differently, in Ge clathrates, up to three vacancies per unit cell can be stabilized. This contrasting behavior is largely driven by the different energy gain on populating the electronic vacancy states, which originates from the different degree of localization of the valence orbitals of Si and Ge. This also actuates a qualitatively different atomic relaxation of the framework.
RESUMO
The novel host-guest compound [Cs6Cl][Fe24Se26] (I4/mmm; a=11.0991(9), c=22.143(2) Å) was obtained by reacting Cs2Se,CsCl, Fe, and Se in closed ampoules. This is the first member of a family of compounds with unique Fe-Se topology, which consists of edge-sharing, extended fused cubane [Fe8Se6Se8/3] blocks that host a guest complex ion, [Cs6Cl](5+). Thus Fe is tetrahedrally coordinated and divalent with strong exchange couplings, which results in an ordered antiferromagnetic state below TN =221 K. At low temperatures, a distribution of hyperfine fields in the Mössbauer spectra suggests a structural distortion or a complex spin structure. With its strong Fe-Se covalency, the compound is close to electronic itinerancy and is, therefore, prone to exhibit tunable properties.
Assuntos
Césio/química , Cloretos/química , Compostos Ferrosos/química , Compostos Organometálicos/química , Cristalografia por Raios X , Modelos Moleculares , Análise EspectralRESUMO
Crystalline nanosized particles of clathrate-II phases K(x)Ge(136) and Na(x)Si(136) were obtained from a dispersion of alkali metal tetrelides in ionic liquids based on DTAC/AlCl(3), which were slowly heated to 120-180 °C. The nanoparticles are bullet-shaped with typical dimensions of about 40 nm in width and 140-200 nm in length. Detailed structure investigations using high-resolution transmission electron microscopy (HRTEM) and electron holography reveal the crystallinity and dense morphology of the clathrate nanorods.
RESUMO
The clathrate-I phase Ba(8-x)Si(46) (space group Pm3Ì n) was synthesized by oxidation of Ba(4)Li(2)Si(6) with gaseous HCl. Microcrystalline powders of the clathrate phase were obtained within a few minutes. The reaction temperature and the pressure of HCl were optimized to achieve good-quality crystalline products with a composition range of 1.3 < x < 1.9. The new preparation route presented here provides an alternative to the high-pressure synthesis applied so far.
RESUMO
Substituted imidazolium ionic liquids (ILs) were investigated for their reactivity towards Na12 Ge17 as a model system containing redox-sensitive Zintl cluster anions. The ILs proved widely inert for imidazolium cations with a 1,2,3-trisubstitution at least by alkyl groups, and for the anion bis(trifluoromethylsulfonyl)azanide (TFSI). A minute conversion of Na12 Ge17 observed on long-time contact with such ILs was not caused by dissolution of the salt-like compound, and did thus not provide dissolved Ge clusters. Rather, a cation exchange led to the transfer of Na+ ions into solution. In contrast, by using benzophenone as an oxidizer, heterogeneous redox reactions of Na12 Ge17 were initiated, transferring a considerable part of Na+ into solution. At optimized conditions, an X-ray amorphous product NaGe6.25 was obtained, which was thermally convertible to the crystalline type-II clathrate Na24-δ Ge136 with almost completely Na-filled polyhedral cages, and α-Ge. The presented method thus provides unexpected access to Na24-δ Ge136 in bulk quantities.
RESUMO
The clathrate-I borosilicide K8-xBySi46-y (0.8 ≤x≤ 1.2 and 6.4 ≤y≤ 7.2; space group Pm3[combining macron]n) was prepared in sealed tantalum ampoules between 900 °C and 1000 °C. By high-pressure preparation at 8 GPa and 1000 °C, a higher boron content is achieved (x = 0.2, y = 7.8). Crystal structure and composition were established from X-ray diffraction data, chemical analysis, WDX spectroscopy, and confirmed by 11B and 29Si NMR, and magnetic susceptibility measurements. The compositions are electron-balanced according to the Zintl rule within one estimated standard deviation. The lattice parameter varies with composition from a = 9.905 Å for K7.85(2)B7.8(1)Si38.2(1) to a = 9.968(1) Å for K6.80(2)B6.4(5)Si39.6(5).
RESUMO
The clathrate-I phase Ba8AlxSi46-x has been structurally characterized at the composition x = 6.9 (space group Pm3[combining macron]n, no. 223, a = 10.4645(2) Å). A crystal structure model comprising the distribution of aluminium and silicon atoms in the clathrate framework was established: 5.7 Al atoms and 0.3 Si atoms occupy the crystallographic site 6c, while 1.2 Al atoms and 22.8 Si atoms occupy site 24k. The atomic distribution was established based on a combination of (27)Al and (29)Si NMR experiments, X-ray single-crystal diffraction and wavelength-dispersive X-ray spectroscopy.