Reactivity of Acrylamides Causes Cytotoxicity and Activates Oxidative Stress Response.

Acrylamides are widely used industrial chemicals that cause adverse effects in humans or animals, such as carcinogenicity or neurotoxicity. The excess toxicity of these reactive electrophilic chemicals is especially interesting, as it is mostly triggered by covalent reactions with biological nucleophiles, such as DNA bases, proteins, or peptides. The cytotoxicity and activation of oxidative stress response of 10 (meth)acrylamides measured in three reporter gene cell lines occurred at similar concentrations. Most acrylamides exhibited high excess toxicity, while methacrylamides acted as baseline toxicants. The (meth)acrylamides showed no reactivity toward the hard biological nucleophile 2-deoxyguanosine (2DG) within 24 h, and only acrylamides reacted with the soft nucleophile glutathione (GSH). Second-order degradation rate constants (kGSH) were measured for all acrylamides with N,N'-methylenebis(acrylamide) (NMBA) showing the highest kGSH (134.800 M-1 h-1) and N,N-diethylacrylamide (NDA) the lowest kGSH (2.574 M-1 h-1). Liquid chromatography coupled to high-resolution mass spectrometry was used to confirm the GSH conjugates of the acrylamides with a double conjugate formed for NMBA. The differences in reactivity between acrylamides and methacrylamides could be explained by the charge density of the carbon atoms because the electron-donating inductive effect of the methyl group of the methacrylamides lowered their electrophilicity and thus their reactivity. The differences in reactivity within the group of acrylamides could be explained by the energy of the lowest unoccupied molecular orbital and steric hindrance. Cytotoxicity and activation of oxidative stress response were linearly correlated with the second-order reaction rate constants of the acrylamides with GSH. The reaction of the acrylamides with GSH is hence not only a detoxification mechanism but also leads to disturbances of the redox balance, making the cells more vulnerable to reactive oxygen species. The reactivity of acrylamides explained the oxidative stress response and cytotoxicity in the cells, and the lack of reactivity of the methacrylamides led to baseline toxicity.

Toward the Proactive Design of Sustainable Chemicals: Ionic Liquids as a Prime Example.

The tailorable and often unique properties of ionic liquids (ILs) drive their implementation into a broad variety of seminal technologies. The modular design of ILs allows in this context a proactive selection of structures that favor environmental sustainability─ideally without compromising their technological performance. To achieve this objective, the whole life cycle must be taken into account and various aspects considered simultaneously. In this review, we discuss how the structural design of ILs affects their environmental impacts throughout all stages of their life cycles and scrutinize the available data in order to point out knowledge gaps that need further research activities. The design of more sustainable ILs starts with the selection of the most beneficial precursors and synthesis routes, takes their technical properties and application specific performance into due account, and considers its environmental fate particularly in terms of their (eco)toxicity, biotic and abiotic degradability, mobility, and bioaccumulation potential. Special emphasis is placed on reported structure-activity relationships and suggested mechanisms on a molecular level that might rationalize the empirically found design criteria.

Environmental Hazard Screening of Heterocyclic Polyaromatic Hydrocarbons: Physicochemical Data and In Silico Models.

Heterocyclic polyaromatic hydrocarbons (heterocyclic PAHs) are frequently found in the environment yet, compared to homocyclic PAHs, little attention has been paid to their environmental behavior and a comprehensive hazard assessment has not been undertaken. Surprisingly, the physicochemical data necessary to perform at least a screening-level assessment are also limited. To address this, we began by experimentally determining the physicochemical properties of heterocyclic PAHs, namely, water solubility (Sw), n-octanol-water partition coefficients (Kow), and organic carbon-water partition coefficients (Koc). The physicochemical data obtained in this study allowed for the development of clear structure-property relationships and evaluation of the predictive power of in silico models including conductor-like screening model for realistic solvation, the poly-parameter linear solvation energy relationship, and the quantitative structure-property relationship. Finally, heterocyclic and homocyclic PAHs were evaluated in terms of persistence, bioaccumulation, mobility, and toxicity to perform a screening-level comparative hazard assessment by integrating the data and evidence from multiple sources.

An informative short-term study on the impacts of a triclocarban/weathered multi-walled carbon nanotube-adsorbed complex to benthic organisms.

Freshwater organisms are suitable models to study the fate of environmental pollutants. Due to their versatile and everyday use, many environmental pollutants such as triclocarban (TCC) or multi-walled carbon nanotubes (MWCNTs) enter environmental compartments very easily. TCC is known as a disinfectant and is declared as a highly aquatic toxicant. Multi-walled carbon nanotubes are used, e.g., in the automotive industry to improve plastic properties. Both TCCs and MWCNTs can pose major pollution hazards to various organisms. In addition, these substances can bind to each other due to their tendency to interact via strong hydrophobic interactions. Therefore, a short-term test was conducted to investigate the effects of the individual chemicals TCC and weathered MWCNTs (wMWCNTs) on a benthic biofilm and a grazing organism, Lymnaea stagnalis. Furthermore, the two compounds were coupled by an adsorption experiment resulting in a coupled complex formation (TCC + wMWCNTs). L. stagnalis showed no effects in terms of mortality. For benthic biofilm, the coupling test (TCC + wMWCNTs) showed a decrease of 58% in chlorophyll a (Chl-a) concentration. The main effect could be attributed to the wMWCNTs' exposure alone (decrease of 82%), but not to presence of TCC. The concentration range of Chl-a upon TCC exposure alone was comparable to that in the control group (32 and 37 µg/cm2). With respect to the particulate organic carbon (POC) concentration, very similar results were found for the solvent control, the TCC, and also for the TCC + wMWCNTs group (3, 2.9, and 2.9 mg/cm2). In contrast to the control, a significant increase in POC concentration (100%) was observed for wMWCNTs, but no synergistic effect of TCC + wMWCNTs was detected.

Bioconcentration potential of ionic liquids: New data on membrane partitioning and its comparison with predictions obtained by COSMOmic.

Ionic liquids (ILs) have recently gained significant attention in both the scientific community and industry, but there is a limited understanding of the potential risks they might pose to the environment and human health, including their potential to accumulate in organisms. While membrane and storage lipids have been considered as primary sorption phases driving bioaccumulation, in this study we used an in vitro tool known as solid-supported lipid membranes (SSLMs) to investigate the affinity of ILs to membrane lipid - phosphatidylcholine and compare the results with an existing in silico model. Our findings indicate that ILs may have a strong affinity for the lipids that form cell membranes, with the key factor being the length of the cation's side chain. For quaternary ammonium cations, increase in membrane affinity (logMA) was observed from 3.45 ± 0.06 at 10 carbon atoms in chain to 4.79 ± 0.06 at 14 carbon atoms. We also found that the anion can significantly affect the membrane partitioning of the cation, even though the anions themselves tend to have weaker interactions with phospholipids than the cations of ILs. For 1-methyl-3-octylimidazolium cation the presence of tricyanomethanide anion caused increase in logMA to 4.23 ± 0.06. Although some of our data proved to be consistent with predictions made by the COSMOmic model, there are also significant discrepancies. These results suggest that further research is needed to improve our understanding of the mechanisms and structure-activity relationships involved in ILs bioconcentration and to develop more accurate predictive models.

Primary and ultimate degradation of benzophenone-type UV filters under different environmental conditions and the underlying structure-biodegradability relationships.

Ten common benzophenone-based UV filters (BPs), sharing the same basic structure and differing only in their substituents, were investigated with respect to their primary and ultimate biodegradability. This study was carried out in order to gain deeper insights into the relationship between structure and biodegradability. The primary biodegradation of the selected BPs was studied in river water at environmentally relevant concentrations (1 µg/L) while varying specific, crucial environmental conditions (aerobic, suboxic, supplementation of nutrients). For this purpose, both batch and column degradation tests were performed, which allowed a systematic study of the effects. Subsequently, the ultimate biodegradation, i.e. the potential to achieve full mineralization of BPs, was examined according to OECD guideline 301 F. The results indicate that mineralization is limited to derivatives in which both aromatic rings contain substituents. This hypothesis was supported by docking simulations showing systematic differences in the orientation of BPs within the active site of the cytochrome P450 enzyme. These differences in orientation correspond to the substitution pattern of the BPs. This study provides valuable insights for assessing the environmental hazards of this class of trace organic compounds.

Structure-related endocrine-disrupting potential of environmental transformation products of benzophenone-type UV filters: A review.

Benzophenone-type UV filters (BPs) represent a very diverse group of chemicals that are used across a range of industrial sectors around the world. They are found within different environmental compartments (e.g. surface water, groundwater, wastewater, sediments and biota) at concentrations ranging from ng/L to mg/L. Some are known as endocrine disruptors and are currently within the scope of international regulations. A structural alert for high potential of endocrine disrupting activity was assigned to 11 BP derivatives. Due to the widespread use, distribution and disruptive effects of some BPs, knowledge of their elimination pathways is required. This review demonstrates that biodegradation and photolytic decomposition are the major elimination processes for BP-type UV filters in the environment. Under aerobic conditions, transformation pathways have only been reported for BP, BP-3 and BP-4, which are also the most common derivatives. Primary biodegradation mainly results in the formation of hydroxylated BPs, which exhibit a structure-related increase in endocrine activity when compared to their parent substances. By combining 76 literature-based transformation products (TPs) with in silico results relating to their receptor activity, it is demonstrated that 32 TPs may retain activity and that further knowledge of the degradation of BPs in the environment is needed.

Determination of the degree of N-acetylation (DA) of chitin and chitosan in the presence of water by first derivative ATR FTIR spectroscopy.

A new method for the determination of the degree of N-acetylation (DA) of chitin and chitosan is described using first derivative diamond ATR FTIR spectroscopy. Applying the derivative values of the amide III band at 1327cm-1 and the CH deformation band of the N-acetyl group at 1383cm-1 as measure of the N-acetyl content of the sample in relation to the derivative value of the bridge oxygen vibration at 1163cm-1 as internal standard, a linear correlation to the results of first derivative UV spectroscopy was obtained and confirmed by elemental analysis and Raman spectroscopy. The described method allows the determination of the degree of N-acetylation of chitosan and chitin in the presence of water thus making drying procedures unnecessary.