Insight into the Mechanism of Phenylacetate Decarboxylase (PhdB), a Toluene-Producing Glycyl Radical Enzyme.

We recently reported the discovery of phenylacetate decarboxylase (PhdB), representing one of only ten glycyl-radical-enzyme reaction types known, and a promising biotechnological tool for first-time biochemical synthesis of toluene from renewable resources. Here, we used experimental and computational data to evaluate the plausibility of three candidate PhdB mechanisms, involving either attack at the phenylacetate methylene carbon or carboxyl group [via H-atom abstraction from COOH or single-electron oxidation of COO- (Kolbe-type decarboxylation)]. In vitro experimental data included assays with F-labeled phenylacetate, kinetic studies, and tests with site-directed PhdB mutants; computational data involved estimation of reaction energetics using density functional theory (DFT). The DFT results indicated that all three mechanisms are thermodynamically challenging (beyond the range of many known enzymes in terms of endergonicity or activation energy barrier), reflecting the formidable demands on PhdB for catalysis of this reaction. Evidence that PhdB was able to bind α,α-difluorophenylacetate but was unable to catalyze its decarboxylation supported the enzyme's abstraction of a methylene H atom. Diminished activity of H327A and Y691F mutants was consistent with proposed proton donor roles for His327 and Tyr691. Collectively, these and other data most strongly support PhdB attack at the methylene carbon.

Discovery of enzymes for toluene synthesis from anoxic microbial communities.

Microbial toluene biosynthesis was reported in anoxic lake sediments more than three decades ago, but the enzyme catalyzing this biochemically challenging reaction has never been identified. Here we report the toluene-producing enzyme PhdB, a glycyl radical enzyme of bacterial origin that catalyzes phenylacetate decarboxylation, and its cognate activating enzyme PhdA, a radical S-adenosylmethionine enzyme, discovered in two distinct anoxic microbial communities that produce toluene. The unconventional process of enzyme discovery from a complex microbial community (>300,000 genes), rather than from a microbial isolate, involved metagenomics- and metaproteomics-enabled biochemistry, as well as in vitro confirmation of activity with recombinant enzymes. This work expands the known catalytic range of glycyl radical enzymes (only seven reaction types had been characterized previously) and aromatic-hydrocarbon-producing enzymes, and will enable first-time biochemical synthesis of an aromatic fuel hydrocarbon from renewable resources, such as lignocellulosic biomass, rather than from petroleum.

Anaerobic Dissolution Rates of U(IV)-Oxide by Abiotic and Nitrate-Dependent Bacterial Pathways.

The long-term stability of U(IV) solid phases in anaerobic aquifers depends upon their reactivity in the presence of oxidizing chemical species and microbial catalysts. We performed flow-through column experiments under anaerobic conditions to investigate the mechanisms and dissolution rates of biogenic, noncrystalline UO2(s) by chemical oxidants (nitrate and/or nitrite) or by Thiobacillus denitrificans, a widespread, denitrifying, chemolithoautotrophic model bacterium. Dissolution rates of UO2(s) with dissolved nitrite were approximately 5 to 10 times greater than with nitrate alone. In the presence of wild-type T. denitrificans and nitrate, UO2(s) dissolution rates were similar to those of abiotic experiments with nitrite (from 1.15 × 10-14 to 4.94 × 10-13 mol m-2 s-1). Experiments with a T. dentrificans mutant strain defective in U(IV) oxidation supported microbially mediated U(IV) oxidation. X-ray absorption spectroscopy (XAS) analysis of post-reaction solids showed the presence of mononuclear U(VI) species rather than a solid U(VI) phase. At steady-state U release, kinetic and spectroscopic results suggest detachment of oxidized U(VI) from the UO2(s) surface as the rate-determining step rather than electron transfer or ion diffusion. Under anaerobic conditions, production of nitrite by nitrate-reducing microorganisms and enzymatically catalyzed, nitrate-dependent U(IV) oxidation are likely dual processes by which reduced U solids may be oxidized and mobilized in the aqueous phase.

Optimization of the IPP-bypass mevalonate pathway and fed-batch fermentation for the production of isoprenol in Escherichia coli.

Isoprenol (3-methyl-3-buten-1-ol) is a drop-in biofuel and a precursor for commodity chemicals. Biological production of isoprenol via the mevalonate pathway has been developed and optimized extensively in Escherichia coli, but high ATP requirements and isopentenyl diphosphate (IPP) toxicity have made it difficult to achieve high titer, yield, and large-scale production. To overcome these limitations, an IPP-bypass pathway was previously developed using the promiscuous activity of diphosphomevalonate decarboxylase, and enabled the production of isoprenol at a comparable yield and titer to the original pathway. In this study, we optimized this pathway, substantially improving isoprenol production. A titer of 3.7 g/L (0.14 g isoprenol per g glucose) was achieved in batch conditions using minimal medium by pathway optimization, and a further optimization of the fed-batch fermentation process enabled an isoprenol titer of 10.8 g/L (yield of 0.105 g/g and maximum productivity of 0.157 g L-1 h-1), which is the highest reported titer for this compound. The substantial increase in isoprenol titer via the IPP-bypass pathway in this study will facilitate progress toward commercialization.

Methyl ketone production by Pseudomonas putida is enhanced by plant-derived amino acids.

Plants are an attractive sourceof renewable carbon for conversion to biofuels and bio-based chemicals. Conversion strategies often use a fraction of the biomass, focusing on sugars from cellulose and hemicellulose. Strategies that use plant components, such as aromatics and amino acids, may improve the efficiency of biomass conversion. Pseudomonas putida is a promising host for its ability to metabolize a wide variety of organic compounds. P. putida was engineered to produce methyl ketones, which are promising diesel blendstocks and potential platform chemicals, from glucose and lignin-related aromatics. Unexpectedly, P. putida methyl ketone production using Arabidopsis thaliana hydrolysates was enhanced 2-5-fold compared with sugar controls derived from engineered plants that overproduce lignin-related aromatics. This enhancement was more pronounced (~seven-fold increase) with hydrolysates from nonengineered switchgrass. Proteomic analysis of the methyl ketone-producing P. putida suggested that plant-derived amino acids may be the source of this enhancement. Mass spectrometry-based measurements of plant-derived amino acids demonstrated a high correlation between methyl ketone production and amino acid concentration in plant hydrolysates. Amendment of glucose-containing minimal media with a defined mixture of amino acids similar to those found in the hydrolysates studied led to a nine-fold increase in methyl ketone titer (1.1 g/L).

Improving methyl ketone production in Escherichia coli by heterologous expression of NADH-dependent FabG.

We previously engineered Escherichia coli to overproduce medium- to long-chain saturated and monounsaturated methyl ketones, which could potentially be applied as diesel fuel blending agents or in the flavor and fragrance industry. Recent efforts at strain optimization have focused on cofactor balance, as fatty acid-derived pathways face the systematic metabolic challenge of net NADPH consumption (in large part, resulting from the key fatty acid biosynthetic enzyme FabG [ß-ketoacyl-ACP reductase]) and net NADH production. In this study, we attempted to mitigate cofactor imbalance by heterologously expressing NADH-dependent, rather than NADPH-dependent, versions of FabG identified in previous studies. Of the four NADH-dependent versions of FabG tested in our previously best-reported methyl ketone-producing strain (EGS1895), the version from Acholeplasma laidlawii (Al_FabG) showed the greatest increase in methyl ketone yield in shake flasks (35-75% higher than for an RFP negative-control strain, depending on sugar loading). An improved strain (EGS2920) attained methyl ketone titers during fed-batch fermentation of 5.4 ± 0.5 g/L, which were, on average, ca. 40% greater than those for the base strain (EGS1895) under fermentation conditions optimized in this study. Shotgun proteomic data for strains EGS2920 and EGS1895 during fed-batch fermentation were consistent with the goal of alleviating NADPH limitation through expression of Al_FabG. For example, relative to strain EGS1895, strain EGS2920 significantly upregulated glucose-6-phosphate isomerase (directing flux into glycolysis rather than the NADPH-producing pentose phosphate pathway) and downregulated MaeB (a NADP+ -dependent malate dehydrogenase). Overall, the results suggest that heterologous expression of NADH-dependent FabG in E. coli may improve sustained production of fatty acid-derived renewable fuels and chemicals.

Engineering E. coli for simultaneous glucose-xylose utilization during methyl ketone production.

BACKGROUND: We previously developed an E. coli strain that overproduces medium-chain methyl ketones for potential use as diesel fuel blending agents or as flavors and fragrances. To date, the strain's performance has been optimized during growth with glucose. However, lignocellulosic biomass hydrolysates also contain a substantial portion of hemicellulose-derived xylose, which is typically the second most abundant sugar after glucose. Commercialization of the methyl ketone-producing technology would benefit from the increased efficiency resulting from simultaneous, rather than the native sequential (diauxic), utilization of glucose and xylose. RESULTS: In this study, genetic manipulations were performed to alleviate carbon catabolite repression in our most efficient methyl ketone-producing strain. A strain engineered for constitutive expression of xylF and xylA (involved in xylose transport and metabolism) showed synchronized glucose and xylose consumption rates. However, this newly acquired capability came at the expense of methyl ketone titer, which decreased fivefold. Further efforts were made to improve methyl ketone production in this strain, and we found that two strategies were effective at enhancing methyl ketone titer: (1) chromosomal deletion of pgi (glucose-6-phosphate isomerase) to increase intracellular NADPH supply and (2) downregulation of CRP (cAMP receptor protein) expression by replacement of the native RBS with an RBS chosen based upon mutant library screening results. Combining these strategies resulted in the most favorable overall phenotypes for simultaneous glucose-xylose consumption without compromising methyl ketone titer at both 1 and 2% total sugar concentrations in shake flasks. CONCLUSIONS: This work demonstrated a strategy for engineering simultaneous utilization of C6 and C5 sugars in E. coli without sacrificing production of fatty acid-derived compounds.

Monoterpene 'thermometer' of tropical forest-atmosphere response to climate warming.

Tropical forests absorb large amounts of atmospheric CO2 through photosynthesis but elevated temperatures suppress this absorption and promote monoterpene emissions. Using 13 CO2 labeling, here we show that monoterpene emissions from tropical leaves derive from recent photosynthesis and demonstrate distinct temperature optima for five groups (Groups 1-5), potentially corresponding to different enzymatic temperature-dependent reaction mechanisms within ß-ocimene synthases. As diurnal and seasonal leaf temperatures increased during the Amazonian 2015 El Niño event, leaf and landscape monoterpene emissions showed strong linear enrichments of ß-ocimenes (+4.4% °C-1 ) at the expense of other monoterpene isomers. The observed inverse temperature response of α-pinene (-0.8% °C-1 ), typically assumed to be the dominant monoterpene with moderate reactivity, was not accurately simulated by current global emission models. Given that ß-ocimenes are highly reactive with respect to both atmospheric and biological oxidants, the results suggest that highly reactive ß-ocimenes may play important roles in the thermotolerance of photosynthesis by functioning as effective antioxidants within plants and as efficient atmospheric precursors of secondary organic aerosols. Thus, monoterpene composition may represent a new sensitive 'thermometer' of leaf oxidative stress and atmospheric reactivity, and therefore a new tool in future studies of warming impacts on tropical biosphere-atmosphere carbon-cycle feedbacks.

Reoxidation of Chromium(III) Products Formed under Different Biogeochemical Regimes.

Hexavalent chromium, Cr(VI), is a widespread and toxic groundwater contaminant. Reductive immobilization to Cr(III) is a treatment option, but its success depends on the long-term potential for reduced chromium precipitates to remain immobilized under oxidizing conditions. In this unique long-term study, aquifer sediments subjected to reductive Cr(VI) immobilization under different biogeochemical regimes were tested for their susceptibility to reoxidation. After reductive treatment for 1 year, sediments were exposed to oxygenated conditions for another 2 years in flow-through, laboratory columns. Under oxidizing conditions, immobilized chromium reduced under predominantly denitrifying conditions was mobilized at low concentrations (≪1 µM Cr(VI); ∼ 3% of Cr(III) deposited) that declined over time. A conceptual model of a limited pool of more soluble Cr(III), and a larger pool of relatively insoluble Cr(III), is proposed. In contrast, almost no chromium was mobilized from columns reduced under predominantly fermentative conditions, and where reducing conditions persisted for several months after introduction of oxidizing conditions, presumably due to the presence of a reservoir of reduced species generated during reductive treatment. The results from this 3-year study demonstrate that biogeochemical conditions present during reductive treatment, and the potential for buildup of reducing species, will impact the long-term sustainability of the remediation effort.

Water Table Dynamics and Biogeochemical Cycling in a Shallow, Variably-Saturated Floodplain.

Three-dimensional variably saturated flow and multicomponent biogeochemical reactive transport modeling, based on published and newly generated data, is used to better understand the interplay of hydrology, geochemistry, and biology controlling the cycling of carbon, nitrogen, oxygen, iron, sulfur, and uranium in a shallow floodplain. In this system, aerobic respiration generally maintains anoxic groundwater below an oxic vadose zone until seasonal snowmelt-driven water table peaking transports dissolved oxygen (DO) and nitrate from the vadose zone into the alluvial aquifer. The response to this perturbation is localized due to distinct physico-biogeochemical environments and relatively long time scales for transport through the floodplain aquifer and vadose zone. Naturally reduced zones (NRZs) containing sediments higher in organic matter, iron sulfides, and non-crystalline U(IV) rapidly consume DO and nitrate to maintain anoxic conditions, yielding Fe(II) from FeS oxidative dissolution, nitrite from denitrification, and U(VI) from nitrite-promoted U(IV) oxidation. Redox cycling is a key factor for sustaining the observed aquifer behaviors despite continuous oxygen influx and the annual hydrologically induced oxidation event. Depth-dependent activity of fermenters, aerobes, nitrate reducers, sulfate reducers, and chemolithoautotrophs (e.g., oxidizing Fe(II), S compounds, and ammonium) is linked to the presence of DO, which has higher concentrations near the water table.

Natural products as biofuels and bio-based chemicals: fatty acids and isoprenoids.

Although natural products are best known for their use in medicine and agriculture, a number of fatty acid-derived and isoprenoid natural products are being developed for use as renewable biofuels and bio-based chemicals. This review summarizes recent work on fatty acid-derived compounds (fatty acid alkyl esters, fatty alcohols, medium- and short-chain methyl ketones, alkanes, α-olefins, and long-chain internal alkenes) and isoprenoids, including hemiterpenes (e.g., isoprene and isopentanol), monoterpenes (e.g., limonene), and sesquiterpenes (e.g., farnesene and bisabolene).

Characterization of Chromium Bioremediation Products in Flow-Through Column Sediments Using Micro-X-ray Fluorescence and X-ray Absorption Spectroscopy.

Microbially mediated reductive immobilization of chromium is a possible remediation technique for sites contaminated with Cr(VI). This study is part of a broader effort investigating the biogeochemical mechanisms for Cr(VI) reduction in Hanford 100H aquifer sediments using flow-through laboratory columns. It had previously been shown that reduced chromium in the solid phase was in the form of freshly precipitated mixed-phase Cr(III)-Fe(III) (hydr)oxides, irrespective of the biogeochemical conditions in the columns. In this study, the reduced Cr phases in the columns were investigated further using spectroscopy to understand the structure and mechanisms involved in the formation of the end products. Several samples representing potential processes that could be occurring in the columns were synthesized in the laboratory and characterized using X-ray absorption near edge structure (XANES) and X-ray scattering. The XANES of Cr(III) particles in the columns most closely resembled those from synthetic samples produced by the abiotic reaction of Cr(VI) with microbially reduced Fe(II). Microbially mediated Cr-Fe reduction products were distinct from abiotic Cr-Fe (hydr)oxides [CrFe(OH)] and organically complexed Cr(III) sorbed onto the surface of a mixed ferrihydrite-goethite mineral phase. Furthermore, analyses of the abiotically synthesized samples revealed that even the end products of purely abiotic, iron-mediated reduction of Cr(VI) are affected by factors such as the presence of excess aqueous Fe(II) and cellular matter. These results suggest that CrFe(OH) phases made under realistic subsurface conditions or in biotic cultures are structurally different from pure Cr(OH) or laboratory-synthesized CrFe(OH). The observed structural differences imply that the reactivity and stability of biogenic CrFe(OH) could potentially be different from that of abiotic CrFe(OH).

Substantial improvements in methyl ketone production in E. coli and insights on the pathway from in vitro studies.

We previously reported development of a metabolic pathway in Escherichia coli for overproduction of medium-chain methyl ketones (MK), which are relevant to the biofuel and flavor-and-fragrance industries. This MK pathway was a re-engineered version of ß-oxidation designed to overproduce ß-ketoacyl-CoAs and involved overexpression of the fadM thioesterase gene. Here, we document metabolic engineering modifications that have led to a MK titer of 3.4 g/L after ~45 h of fed-batch glucose fermentation and attainment of 40% of the maximum theoretical yield (the best values reported to date for MK). Modifications included balancing overexpression of fadR and fadD to increase fatty acid flux into the pathway, consolidation of the pathway from two plasmids into one, codon optimization, and knocking out key acetate production pathways. In vitro studies confirmed that a decarboxylase is not required to convert ß-keto acids into MK and that FadM is promiscuous and can hydrolyze several CoA-thioester pathway intermediates.

Biochemical and structural studies of NADH-dependent FabG used to increase the bacterial production of fatty acids under anaerobic conditions.

Major efforts in bioenergy research have focused on producing fuels that can directly replace petroleum-derived gasoline and diesel fuel through metabolic engineering of microbial fatty acid biosynthetic pathways. Typically, growth and pathway induction are conducted under aerobic conditions, but for operational efficiency in an industrial context, anaerobic culture conditions would be preferred to obviate the need to maintain specific dissolved oxygen concentrations and to maximize the proportion of reducing equivalents directed to biofuel biosynthesis rather than ATP production. A major concern with fermentative growth conditions is elevated NADH levels, which can adversely affect cell physiology. The purpose of this study was to identify homologs of Escherichia coli FabG, an essential reductase involved in fatty acid biosynthesis, that display a higher preference for NADH than for NADPH as a cofactor. Four potential NADH-dependent FabG variants were identified through bioinformatic analyses supported by crystallographic structure determination (1.3- to 2.0-Å resolution). In vitro assays of cofactor (NADH/NADPH) preference in the four variants showed up to ≈ 35-fold preference for NADH, which was observed with the Cupriavidus taiwanensis FabG variant. In addition, FabG homologs were overexpressed in fatty acid- and methyl ketone-overproducing E. coli host strains under anaerobic conditions, and the C. taiwanensis variant led to a 60% higher free fatty acid titer and 75% higher methyl ketone titer relative to the titers of the control strains. With further engineering, this work could serve as a starting point for establishing a microbial host strain for production of fatty acid-derived biofuels (e.g., methyl ketones) under anaerobic conditions.

Divergent aquifer biogeochemical systems converge on similar and unexpected Cr(VI) reduction products.

In this study of reductive chromium immobilization, we found that flow-through columns constructed with homogenized aquifer sediment and continuously infused with lactate, chromate, and various native electron acceptors diverged to have very different Cr(VI)-reducing biogeochemical regimes characterized by either denitrifying or fermentative conditions (as indicated by effluent chemical data, 16S rRNA pyrotag data, and metatranscriptome data). Despite the two dramatically different biogeochemical environments that evolved in the columns, these regimes created similar Cr(III)-Fe(III) hydroxide precipitates as the predominant Cr(VI) reduction product, as characterized by micro-X-ray fluorescence and micro-X-ray absorption near-edge structure analysis. We discuss two conflicting scenarios of microbially mediated formation of Cr(III)-Fe(III) precipitates, each of which is both supported and contradicted by different lines of evidence: (1) enzymatic reduction of Cr(VI) to Cr(III) followed by coprecipitation of Cr(III) and Fe(III) and (2) both regimes generated at least small amounts of Fe(II), which abiotically reduced Cr(VI) to form a Cr-Fe precipitate. Evidence of zones with different levels of Cr(VI) reduction suggest that local heterogeneity may have confounded interpretation of processes based on bulk measurements. This study indicates that the bulk redox status and biogeochemical regime, as categorized by the dominant electron-accepting process, do not necessarily control the final product of Cr(VI) reduction.

Genomic and physiological characterization of the chromate-reducing, aquifer-derived Firmicute Pelosinus sp. strain HCF1.

Pelosinus spp. are fermentative firmicutes that were recently reported to be prominent members of microbial communities at contaminated subsurface sites in multiple locations. Here we report metabolic characteristics and their putative genetic basis in Pelosinus sp. strain HCF1, an isolate that predominated anaerobic, Cr(VI)-reducing columns constructed with aquifer sediment. Strain HCF1 ferments lactate to propionate and acetate (the methylmalonyl-coenzyme A [CoA] pathway was identified in the genome), and its genome encodes two [NiFe]- and four [FeFe]-hydrogenases for H(2) cycling. The reduction of Cr(VI) and Fe(III) may be catalyzed by a flavoprotein with 42 to 51% sequence identity to both ChrR and FerB. This bacterium has unexpected capabilities and gene content associated with reduction of nitrogen oxides, including dissimilatory reduction of nitrate to ammonium (two copies of NrfH and NrfA were identified along with NarGHI) and a nitric oxide reductase (NorCB). In this strain, either H(2) or lactate can act as a sole electron donor for nitrate, Cr(VI), and Fe(III) reduction. Transcriptional studies demonstrated differential expression of hydrogenases and nitrate and nitrite reductases. Overall, the unexpected metabolic capabilities and gene content reported here broaden our perspective on what biogeochemical and ecological roles this species might play as a prominent member of microbial communities in subsurface environments.

Engineering of Ralstonia eutropha H16 for autotrophic and heterotrophic production of methyl ketones.

Ralstonia eutropha is a facultatively chemolithoautotrophic bacterium able to grow with organic substrates or H2 and CO2 under aerobic conditions. Under conditions of nutrient imbalance, R. eutropha produces copious amounts of poly[(R)-3-hydroxybutyrate] (PHB). Its ability to utilize CO2 as a sole carbon source renders it an interesting new candidate host for the production of renewable liquid transportation fuels. We engineered R. eutropha for the production of fatty acid-derived, diesel-range methyl ketones. Modifications engineered in R. eutropha included overexpression of a cytoplasmic version of the TesA thioesterase, which led to a substantial (>150-fold) increase in fatty acid titer under certain conditions. In addition, deletion of two putative ß-oxidation operons and heterologous expression of three genes (the acyl coenzyme A oxidase gene from Micrococcus luteus and fadB and fadM from Escherichia coli) led to the production of 50 to 65 mg/liter of diesel-range methyl ketones under heterotrophic growth conditions and 50 to 180 mg/liter under chemolithoautotrophic growth conditions (with CO2 and H2 as the sole carbon source and electron donor, respectively). Induction of the methyl ketone pathway diverted substantial carbon flux away from PHB biosynthesis and appeared to enhance carbon flux through the pathway for biosynthesis of fatty acids, which are the precursors of methyl ketones.

Development of a broad-host synthetic biology toolbox for Ralstonia eutropha and its application to engineering hydrocarbon biofuel production.

BACKGROUND: The chemoautotrophic bacterium Ralstonia eutropha can utilize H2/CO2 for growth under aerobic conditions. While this microbial host has great potential to be engineered to produce desired compounds (beyond polyhydroxybutyrate) directly from CO2, little work has been done to develop genetic part libraries to enable such endeavors. RESULTS: We report the development of a toolbox for the metabolic engineering of Ralstonia eutropha H16. We have constructed a set of broad-host-range plasmids bearing a variety of origins of replication, promoters, 5' mRNA stem-loop structures, and ribosomal binding sites. Specifically, we analyzed the origins of replication pCM62 (IncP), pBBR1, pKT (IncQ), and their variants. We tested the promoters P(BAD), T7, P(xyls/PM), P(lacUV5), and variants thereof for inducible expression. We also evaluated a T7 mRNA stem-loop structure sequence and compared a set of ribosomal binding site (RBS) sequences derived from Escherichia coli, R. eutropha, and a computational RBS design tool. Finally, we employed the toolbox to optimize hydrocarbon production in R. eutropha and demonstrated a 6-fold titer improvement using the appropriate combination of parts. CONCLUSION: We constructed and evaluated a versatile synthetic biology toolbox for Ralstonia eutropha metabolic engineering that could apply to other microbial hosts as well.

Structure of FabH and factors affecting the distribution of branched fatty acids in Micrococcus luteus.

Micrococcus luteus is a Gram-positive bacterium that produces iso- and anteiso-branched alkenes by the head-to-head condensation of fatty-acid thioesters [coenzyme A (CoA) or acyl carrier protein (ACP)]; this activity is of interest for the production of advanced biofuels. In an effort to better understand the control of the formation of branched fatty acids in M. luteus, the structure of FabH (MlFabH) was determined. FabH, or ß-ketoacyl-ACP synthase III, catalyzes the initial step of fatty-acid biosynthesis: the condensation of malonyl-ACP with an acyl-CoA. Analysis of the MlFabH structure provides insights into its substrate selectivity with regard to length and branching of the acyl-CoA. The most structurally divergent region of FabH is the L9 loop region located at the dimer interface, which is involved in the formation of the acyl-binding channel and thus limits the substrate-channel size. The residue Phe336, which is positioned near the catalytic triad, appears to play a major role in branched-substrate selectivity. In addition to structural studies of MlFabH, transcriptional studies of M. luteus were also performed, focusing on the increase in the ratio of anteiso:iso-branched alkenes that was observed during the transition from early to late stationary phase. Gene-expression microarray analysis identified two genes involved in leucine and isoleucine metabolism that may explain this transition.

Differential isotopic fractionation during Cr(VI) reduction by an aquifer-derived bacterium under aerobic versus denitrifying conditions.

We studied Cr isotopic fractionation during Cr(VI) reduction by Pseudomonas stutzeri strain RCH2. Despite the fact that strain RCH2 reduces Cr(VI) cometabolically under both aerobic and denitrifying conditions and at similar specific rates, fractionation was markedly different under these two conditions (ε was ∼2‰ aerobically and ∼0.4‰ under denitrifying conditions).