RESUMO
We describe a process for obtaining nanocrystalline cellulose (NC) by either acidic (H-NC) or alkaline treatment (OH-NC) of microcrystalline cellulose, which was subsequently bonded to magnetic nanoparticles (H-NC-MNP and OH-NC-MNP) and used as support for the immobilization of Aspergillus oryzae (H-NC-MNP-Ao and OH-NC-MNP-Ao) and Kluyveromyces lactis (H-NC-MNP-Kl and OH-NC-MNP-Kl) ß-galactosidases. The mean size of magnetic nanocellulose particles was approximately 75 nm. All derivatives reached saturation magnetizations of 7-18 emu/g, with a coercivity of approximately 4 kOe. Derivatives could be applied in batch hydrolysis of lactose either in permeate or in cheese whey for 30× and it reached hydrolysis higher than 50%. Furthermore, using a continuous process in a column packed-bed reactor, the derivative OH-NC-MNP-Ao had capacity to hydrolyze over 50% of the lactose present in milk or whey after 24 h of reaction. Fungal ß-galactosidases immobilized on magnetic nanocellulose can be applied in lactose hydrolysis using batch or continuous processes.
Assuntos
Celulose/química , Enzimas Imobilizadas/química , Proteínas Fúngicas/química , Kluyveromyces/enzimologia , Campos Magnéticos , beta-Galactosidase/químicaRESUMO
Anatase nanotubes with high surface area (ca. 350 m2 g-1), containing gold nanoparticles, were successfully obtained from trititanate nanotubes, prepared by a template-free hydrothermal method, and calcined at 450 °C. The high surface area and tubular morphology were attained due to the presence of ionic silsesquioxane, which acts as anti-sintering agent for titania during calcination process, by forming a thin silica coating between anatase nanotubes. Additionally, the ionic silsesquioxane also acts as stabilizing and adhesion agent for gold nanoparticles on the surface of anatase nanotubes. The influence of the ionic silsesquioxane on the morphological and textural properties of anatase nanotubes was studied in three different moments during the synthesis: before, after and before/after nanotubes were rolled up. The photocatalytic activity of the nanotube samples was evaluated by hydrogen generation showing remarkable enhancement in hydrogen production and stability of catalyst when compare with the bare anatase sample and commercial P-25.
RESUMO
A dispersant for multiwall carbon nanotubes (MWCNTs) is proposed that fulfils the requirements of creating a uniform dispersion in the matrix and obtaining a good interface between CNTs and the matrix, and is soluble in generic nonpolar solvents. This dispersant is based on a long chain surfactant, called in this work dabcosil stearate, containing a stearate-based 18-carbon alkyl chain as an anion, and a silsesquioxane containing a bridged, positively charged 1,4-diazoniabicyclo[2.2.2]octane group. It provides not only a very good dispersion medium for the MWCNTs, but also a very good interface between MWCNTs and ceramic matrices, such as alumina and zirconia, prepared by the sol-gel method.
RESUMO
The effect of the support size on the properties of enzyme immobilization was investigated by using chitosan macroparticles and nanoparticles. They were prepared by precipitation and ionotropic gelation, respectively, and were characterized by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), transmission electron microscopy (TEM), light scattering analysis (LSA), and N(2) adsorption-desorption isotherms. ß-Galactosidase was used as a model enzyme. It was found that the different sizes and porosities of the particles modify the enzymatic load, activity, and thermal stability of the immobilized biocatalysts. The highest activity was shown by the enzyme immobilized on nanoparticles when 204.2 mg protein·(g dry support)(-1) were attached. On the other hand, the same biocatalysts presented lower thermal stability than macroparticles. ß-Galactosidase immobilized on chitosan macro and nanoparticles exhibited excellent operational stability at 37 °C, because it was still able to hydrolyze 83.2 and 75.93% of lactose, respectively, after 50 cycles of reuse.
Assuntos
Quitosana/química , Enzimas Imobilizadas/química , Proteínas Fúngicas/química , Nanopartículas/química , beta-Galactosidase/química , Biocatálise , Varredura Diferencial de Calorimetria , Estabilidade Enzimática , Hidrólise , Kluyveromyces/enzimologia , Lactose/química , Luz , Nanopartículas/ultraestrutura , Tamanho da Partícula , Ligação Proteica , Espalhamento de Radiação , Espectroscopia de Infravermelho com Transformada de Fourier , TermogravimetriaRESUMO
Two Schiff bases were synthesized by reaction of 2-(4'-aminophenyl)benzoxazole derivatives with 4-N,N-diethylaminobenzaldehyde. UV-visible (UV-vis) and steady-state fluorescence in solution were applied in order to characterize its photophysical behavior. The Schiff bases present absorption in the UV region with fluorescence emission in the blue-green region, with a large Stokes' shift. The UV-vis data indicates that each dye behaves as two different chromophores in solution in the ground state. The fluorescence emission spectra of the dye 5a show that an intramolecular proton transfer (ESIPT) mechanism takes place in the excited state, whereas a twisted internal charge transfer (TICT) state is observed for the dye 5b. Theoretical calculations were performed in order to study the conformation and polarity of the molecules at their ground and excited electronic states. Using density functional theory (DFT) methods at theoretical levels BLYP/Aug-SV(P) for geometry optimizations and B3LYP/6-311++G(2d,p) for single-point energy evaluations, the calculations indicate that the lowest energy conformations are in all cases nonplanar and that the dipole moments of the excited state relaxed structures are much larger than those of the ground state structures, which corroborates the experimental UV-vis absorption results.
Assuntos
Benzoxazóis/química , Benzoxazóis/síntese química , Bases de Schiff/química , Fluorescência , Estrutura Molecular , Teoria Quântica , Bases de Schiff/síntese química , Espectrofotometria UltravioletaRESUMO
Because of its high surface area and combination of various functional groups, graphene oxide (GO) is currently one of the most actively studied materials for electroanalytical applications. It is not practical to utilize self-supported GO on its own and thus it is commonly integrated with different supporting carriers. Having a large lateral size, GO can only wrap the particles of the support and thus can significantly reduce the surface area of porous materials. To achieve synergy from the high surface area and polyfunctional nature of GO, and the rigid structure of a porous support, the lateral size of GO must essentially be decreased. Recently reported graphene oxide quantum dots (GOQDs) can fulfil this task. Here we report the successful preparation of an SiO2-GOQDs hybrid, where GOQDs have been incorporated into the mesoporous network of silica. The SiO2-GOQDs emit a strong luminescence with a band maximum at 404 nm. The Raman spectrum of SiO2-GOQDs shows two distinct peaks at 1585 cm-1 (G-peak) and 1372 cm-1 (D-peak), indicating the presence of a graphene ordered basal plane with aromatic sp2-domains and a disordered oxygen-containing structure. Covalent immobilization of GOQDs onto aminosilica via such randomly structured oxygen fragments was proven with the help of Fourier transform infrared spectroscopy, solid-state cross-polarization magic angle spinning 13C nuclear magnetic resonance, and X-ray photoelectron spectroscopy. SiO2-GOQDs were used as a modifier of a carbon paste electrode for differential pulse voltammetry determination of two antibiotics (sulfamethoxazole and trimethoprim) and two endocrine disruptors (diethylstilbestrol (DES) and estriol (EST)). The modified electrodes demonstrated a significant signal enhancement for EST (370%) and DES (760%), which was explained by a π-π stacking interaction between GOQDs and the aromatic system of the analytes.
RESUMO
A set of silica-based hybrid material samples was obtained, with different molar fractions of tetraethylorthosilicate and dimethyldimethoxysilane, as inorganic and organic sol-gel precursors, respectively. The hybrid material was used as a matrix to disperse the 2-(4'-amino-2'-hydroxyphenyl)benzothiazole, a fluorophore with large Stokes shift caused by an excited state intramolecular proton transfer phenomena (ESIPT). UV-vis and steady-state fluorescence in the solid state were applied in order to characterize the photophysical behavior of the dye. The set of samples was characterized by infrared spectroscopy, elemental analysis, and N(2) isotherms. The fluorescent pyrene dye was used as a probe for local polarity environment. For the first time, a modulation in the ESIPT fluorescence emission was achieved, being correlated to the methyl organic content of the hybrid matrix. The equilibrium between the conformers in the ground state is affected by changes in the matrix hydrophobicity. The replacement of silanol groups by methyl groups on matrix surface decreases the hydrogen bond capacity with the dye stabilizing the ESIPT conformer, in spite of the normal conformers, which will present a short wavelength emission band.
RESUMO
Anisotropic self-organized hybrid silica based xerogels were obtained. The ordered structure was imposed by the double charged 1,4-diazoniabicycle[2.2.2]octane chloride group bonded in a bridged way. This was confirmed by the presence of well defined X-ray diffraction peaks corresponding to an interplanar distance with the same length estimated for the organic bridged groups. The material was characterized by elemental analysis using CHN technique and the chloride ion was analyzed by a potentiometric titration. (13)C and (29)Si CP MAS solid state NMR spectroscopy and thermogravimetric analysis were also performed. The material that can be obtained in the form of powders and transparent monoliths or films, is thermally stable up to 260 degrees C and the samples with high organic content presented birefringence properties.
RESUMO
The Brazilian pine-fruit shell (Araucaria angustifolia) is a food residue, that was used as biosorbent for the removal of non-hydrolyzed reactive red 194 (NRR) and hydrolyzed reactive red 194 (HRR) forms from aqueous solutions. Chemical treatment of Brazilian pine-fruit shell (PW), with chromium (Cr-PW), with acid (A-PW), and with acid followed by chromium (Cr-A-PW) were also tested as alternative biosorbents for the removal of NRR and HRR from aqueous effluents. It was observed that the treatment of the Brazilian pine-fruit shell with chromium (Cr-PW and Cr-A-PW) leaded to a remarkable increase in the specific surface area and average porous volume of these biosorbents when compared to unmodified Brazilian pine-fruit shell (PW). The effects of shaking time, biosorbent dosage and pH on biosorption capacity were studied. In acidic pH region (pH 2.0) the biosorption of NRR and HRR were favorable. The contact time required to obtain the equilibrium was 24h at 25 degrees C. The equilibrium data were fitted to Langmuir, Freundlich, Sips and Redlich-Peterson isotherm models. For NRR reactive dye the equilibrium data were best fitted to the Sips isotherm model using PW and A-PW as biosorbents, and Redlich-Peterson isotherm model using Cr-PW and Cr-A-PW as biosorbents. For HRR reactive dye the equilibrium data were best fitted to the Sips isotherm model using PW, A-PW and Cr-A-PW and the Redlich-Peterson isotherm model for Cr-PW as biosorbent.
Assuntos
Corantes/isolamento & purificação , Traqueófitas/química , Adsorção , Cromo/química , Concentração de Íons de Hidrogênio , Cinética , Microscopia Eletrônica de Varredura , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Wastes of Araucaria angustifolia (named pinhão) natural (PW) and also loaded with Congo red (CRP) were tested as low-cost adsorbents for Cu(II) removal from aqueous solutions. In order to reduce the total number of experiments to achieve the best conditions of the batch adsorption procedure, three sets of statistical designs of experiments were carried-out for each adsorbent. Initially, a full 2(4) factorial design for each adsorbent with two central points (18 experiments) were performed, to optimize the following factors: mass of adsorbent (m), pH, time of contact (t) and initial metallic ion concentration (Co). These results indicated that almost all the main factors and its interactions were significant. It was verified for both adsorbents, that a mass of 30.0mg leaded to higher Cu(II) uptake and that the best pH for Cu(II) adsorption was 5.6. In order to continue the batch adsorption optimization of the systems, a central composite surface analysis design with two factors (Co, t) containing 13 experiments, divided in to four cube points, four axial points and five centre points was carried-out for each adsorbent. By performing these two sets of statistical design of experiments, the best conditions for Cu(II) uptake using pinhão wastes (PW) and pinhão wastes loaded with Congo red (CRP) using batch adsorption system, where: m=30.0mg of adsorbent; pH 5.6; t=2.5h. After optimizing the batch adsorption system by statistical design of experiments, isotherms for Cu(II) uptake using PW and CRP were performed. These isotherms fitted to the linear Langmuir and Freundlich models.
Assuntos
Cobre/isolamento & purificação , Resíduos Industriais/prevenção & controle , Modelos Químicos , Adsorção , Vermelho Congo , Concentração de Íons de Hidrogênio , Projetos de PesquisaRESUMO
In this work, SiO2/Nb2O5 (SiNb) material was prepared using sol-gel method and employed as adsorbent for removal of crystal violet dye (CV). The material was characterized using nitrogen adsorption-desorption isotherms, FTIR spectroscopy, pHpzc, and SEM-EDS. The analysis of N2 isotherms revealed the presence of micro- and mesopores in the SiNb sample with specific surface area as high as 747â m2â g-1. For the CV adsorption process, variations of several parameters such as of pH, temperature, contact time, and concentration of dye of the process were evaluated. The optimum initial pH of the CV dye solution was 7.0. The adsorption kinetic and equilibrium data for CV adsorption were suitably represented by the general-order and Liu models, respectively. The maximum adsorption capacity of the CV dye by SiNb was achieved at 303â K, which attained 116â mgâ g-1 at this temperaure. Dye effluents were simulated and used to check the applicability of the SiNb material for treatment of effluents - the material showed very good efficiency for decolorization of dye effluents.
Assuntos
Corantes/química , Violeta Genciana/química , Nióbio/química , Óxidos/química , Dióxido de Silício/química , Poluentes Químicos da Água/química , Adsorção , Géis , Cinética , Temperatura , Eliminação de Resíduos Líquidos/métodos , Purificação da Água/métodosRESUMO
7-Amine-4-azaheptylsilica (AAH Si) and 10-amine-4-azadecylsilica (AAD Si) were prepared and used for removal of Cu(II), Pb(II), and Fe(III) from aqueous solutions. Full 2(3) factorial designs with two pseudo-central points were carried out in order to achieve the best conditions of the batch adsorption procedure for metallic ion uptake by the adsorbents. To continue the optimizations, central composite surface design was also employed. These two independent statistical designs of experiments lead to the following conditions: m=30.0 mg of adsorbent; pH 6.0 for Cu(II) and Pb(II), pH 4.0 for Fe(III); t of contact 180 min to guarantee equilibration at higher adsorbate concentration. After optimization of the conditions, isotherms of the metallic ions adsorbed on the AAH Si and AAD Si adsorbents were obtained, which were fitted to nonlinear Langmuir and Freundlich isotherm models.
Assuntos
Aminas/química , Cobre/química , Ferro/química , Chumbo/química , Compostos de Organossilício/química , Projetos de Pesquisa/estatística & dados numéricos , Adsorção , Aminas/síntese química , Compostos de Organossilício/síntese química , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
The compound di-3-n-propyltrimethoxysilane (1,4-diazoniabicycle[2.2.2]octane) dichloride, [(MeO)3Si(CH2)3N+ (CH2CH2)3N+ (CH2)3Si(OME)3]Cl2 was obtained and was used as a precursor reagent to obtain hybrid xerogels where the organic molecule was bonded to a silica framework by reacting the ends of both sides of the precursor reagent. That is, both -Si(OME)3 groups react with tetraethylorthosilicate (TEOS) by hydrolysis-condensation reactions. The resulting hybrid xerogels with variable C/Si mole ratios were prepared and analyzed and their textural characteristics determined. The samples prepared presented micropores with diameter 1.5 nm, the chain length of which matched with the estimated length of the organic bridging group. The charged organic bridging groups allow the immobilization of hexacyanoferrate ions by an ion exchange process. The electron transfer process of the hexacyanoferrate anionic complex confined in the pores of the matrices was studied by cyclovoltammetry.
RESUMO
Silica gel containing silver ions was prepared and characterized. Silica was organofunctionalized with 3-mercaptopropyl group by using grafting reaction followed by silver ions adsorption (silver covalently bonded to mercaptopropyl silca gel, Ag-MPSG). The organofunctionalization and silver coordination were observed by transmission infrared spectroscopy and elemental analyses (CHN and EDS). The textural characteristics were studied by N2 adsorption-desorption isotherms. Additionally, optical properties were studied by diffuse reflectance spectroscopy. The Ag-MPSG material was employed as stationary phase for the first time for fractionation of a heavy gas oil sample resulting in a fraction that is richer in polycyclic aromatic sulfur heterocycles (PASH). The fractions were analyzed by comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometric detector and Ag-MPSG material provided similar fractionation performance when compared to conventional material [palladium covalently bonded to mercaptopropyl silca gel, Pd(II)-MPSG] usually employed for the same purpose and as the cost of silver is less than the one of palladium, the cost of the fractionation phase was reduced.
Assuntos
Óleos Combustíveis/análise , Paládio/química , Sílica Gel/química , Prata/química , Tiofenos/isolamento & purificação , Fracionamento Químico , Cromatografia Gasosa-Espectrometria de Massas , Compostos de Sulfidrila/químicaRESUMO
A study of the basic characteristics of the hybrid anilinesilica xerogel, which shows promising metal sorption properties, was carried out. A simplified approach to describe the protonization affinity of the immobilized aniline was developed, and it was compared with the known values for free aniline. The proton chemisorption process may be described properly by a model based on the Langmuir equation, and the immobilized groups have less affinity to the H(+) than to the free aniline.
RESUMO
A new sorbent was synthesized by anchoring 7-amino-4-azaheptyltrimetoxisilane, freshly prepared, to silica gel, producing 7-amino-4-azaheptyl anchored silica gel (AAHSG). This material was characterized by infrared spectroscopy (IR), elemental analysis (CHN), and nitrogen adsorption-desorption isotherms. Isotherms of the adsorption of Fe3+, Fe2+ and Cu2+ on AAHSG were recorded, which indicated that Fe3+ presents a higher affinity by the sorbent. Therefore, AAHSG was successfully employed as a sorbent in a simple flow system for the preconcentration of Fe3+ in natural water samples, such as, river water, lagoonwater, springwater, stream water, well water and two water reference materials (NIST-SRM 1640, NIST-SRM 1643d). The obtained preconcentration factor was 82.2, and the detection limit achieved was 5.9 ng ml(-1). The recovery of spiked water samples ranged from 95.0 - 103.1%.
RESUMO
The 1,3-diaminepropane-3-propyl-anchored silica gel (DAPPS) was successfully employed as a sorbent in a spectrophotometric flow system for the preconcentration of Cu(2+) in digests of biological materials (maize powder, soybean, citrus leaves, corn stalks) as well as water samples (river, stream, streamlet, springwater and well). The system presented a minicolumn packed with DAPPS, where the sample solution was passed through it for a period of time, and subsequently, an eluent solution, stripped-out the retained analyte which was further determined with DDTC at 460 nm. The better preconcentration conditions utilized were: 120s loading, 60s elution, 30s regeneration of the column, loading flow rate 6.5 ml min(-1), buffer solution for the preconcentration and regeneration of the column-borate buffer pH 8.5, elution flow rate 2.3 ml min(-1), time of elution 60s, eluent composition, 0.4 mol l(-1) HNO(3). Under these conditions, the preconcentration factor obtained was 36, and the detection limit achieved was 8.4 ng ml(-1) in water samples and 0.84 microg g(-1) in biological material. The maximum adsorption capacity of DAPPS to Cu(2+) was 0.49 mmol g(-1) (31.1 mg g(-1)) obtained in a batch system. The recovery of copper in the water samples ranged from 96.9 to 102.4% and in the biological materials ranged from 97.0 to 102.6%.
Assuntos
Cobre/análise , Diaminas , Água Doce/análise , Adsorção , Cinética , Metais Pesados/análise , Sensibilidade e Especificidade , Sílica Gel , Dióxido de Silício , EspectrofotometriaRESUMO
Active biofilms of quinoa (Chenopodium quinoa, W.) starch were prepared by incorporating gold nanoparticles stabilised by an ionic silsesquioxane that contains the 1,4-diazoniabicyclo[2.2.2]octane chloride group. The biofilms were characterised and their antimicrobial activity was evaluated against Escherichiacoli and Staphylococcusaureus. The presence of gold nanoparticles produces an improvement in the mechanical, optical and morphological properties, maintaining the thermal and barrier properties unchanged when compared to the standard biofilm. The active biofilms exhibited strong antibacterial activity against food-borne pathogens with inhibition percentages of 99% against E. coli and 98% against S. aureus. These quinoa starch biofilms containing gold nanoparticles are very promising to be used as active food packaging for the maintenance of food safety and extension of the shelf life of packaged foods.
Assuntos
Antibacterianos/farmacologia , Biofilmes/efeitos dos fármacos , Chenopodium quinoa/química , Nanopartículas Metálicas/química , Amido/química , Antibacterianos/química , Escherichia coli/efeitos dos fármacos , Embalagem de Alimentos , Ouro/química , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Staphylococcus aureus/efeitos dos fármacosRESUMO
The metal ion adsorption properties of the microporous hybrid anilinepropylsilica xerogel were studied using divalent copper, zinc, and cadmium ions in aqueous solutions in concentrations ranging from 10(-4) up to 5x10(-3) moll(-1). At low concentrations the surface of the solid phase presents selectivity for Cu (II), even in competitive conditions. This preferential sorption ability for copper in relation to zinc and cadmium ions was interpreted by considering the xerogel morphology.
RESUMO
Spherical silver nanoparticles with an average size of ca. 5 nm were synthesized in aqueous medium using a charged silsesquioxane containing a quaternary ammonium group, the bridged 1,4-diazoniabicyclo[2.2.2]octane nitrate, as a stabilizer and size controller. For the first time this system was synthesized and applied as an antibacterial agent and its activity was confirmed with excellent results. The new system shows high stability, which can be confirmed by the unchanged UV-Vis band even one year later. The magnitude of the zeta-potential (ζ) (+24.7 mV) indicated electrostatic contribution for the silver nanoparticles stability and the signal showed that the nanoparticles have a positively charged surface. In vitro antibacterial tests were performed against E. coli, P. aeruginosa and S. aureus bacteria, and the minimum concentrations of silver in the nanoparticle form for complete inhibition of bacteria were 0.60, 1.1 and 2.0 µg mL-1, respectively. These values are very low when compared to the previous reports, making this system very promising. The cytotoxicity assay showed that these silver nanoparticles are safe for mammalian cells at the studied concentrations.