In silico toxicity and immunological interactions of components of calcium silicate-based and epoxy resin-based endodontic sealers.

OBJECTIVES: The present study aimed to determine in silico toxicity predictions of test compounds from hydraulic calcium silicate-based sealers (HCSBS) and AH Plus and computationally simulate the interaction between these substances and mediators of periapical inflammation via molecular docking. MATERIALS AND METHODS: All chemical information of the test compounds was obtained from the PubChem site. Predictions for bioavailability and toxicity analyses were determined by the Molinspiration Cheminformatics, pkCSM, ProTox-II and OSIRIS Property Explorer platforms. Molecular docking was performed using the Autodock4 AMDock v.1.5.2 program to analyse interactions between proteins (IL-1ß, IL-6, IL-8, IL-10 and TNF-α) and ligands (calcium silicate hydrate, zirconium oxide, bisphenol-A epoxy resin, dibenzylamine, iron oxide and calcium tungstate) to establish the affinity and bonding mode between systems. RESULTS: Bisphenol-A epoxy resin had the lowest maximum dose tolerated in humans and was the test compound with the largest number of toxicological properties (hepatotoxicity, carcinogenicity and irritant). All systems had favourable molecular docking. However, the ligands bisphenol-A epoxy resin and dibenzylamine had the greatest affinity with the cytokines tested. CONCLUSION: In silico predictions and molecular docking pointed the higher toxicity and greater interaction with mediators of periapical inflammation of the main test compounds from AH Plus compared to those from HCSBS. CLINICAL RELEVANCE: This is the first in silico study involving endodontic materials and may serve as the basis for further research that can generate more data, producing knowledge on the interference of each chemical compound in the composition of different root canal sealers.

The use of sonic and ultrasonic activation of endodontic sealer to improve sealer filling quality in the root canal: a scoping review.

This scoping review aimed to map whether the use of sonic and ultrasonic methods to activate the endodontic sealer improves the sealer filling quality in the root canal, considering the bond strength and intratubular penetration to the root dentin as evaluation criteria. The study protocol was prospectively registered and is available online ( https://osf.io/x5fma/ ). Reporting was based on PRISMA Extension for Scoping Reviews. The search was performed in Embase, PubMed, Scopus, and Web of Science. We selected studies without time and language restrictions that used sonic or ultrasonic methods to activate endodontic sealer, whose outcomes were bond strength and intratubular penetration. Three researchers independently selected the articles and collected data. Of 1422 articles, 19 were read in full and 13 studies were included. The vast majority of studies opted for direct activation of the endodontic sealer. The most investigated sealers were the epoxy resin-based sealers, and the ultrasonic activation method was the most explored. For the bond strength outcome, there was a trend toward higher values when the sealer was activated ultrasonically, but the findings seem to be divergent. The sonic activation was not effective for its intended purpose. For the outcome of intratubular penetration, the vast majority of studies indicate that the use of sonic and ultrasonic methods to activate the endodontic sealer is capable of increasing intratubular penetration. The use of sonic and ultrasonic methods to directly activate the endodontic sealer can increase the intratubular penetration of the sealer, but their benefits on the bond strength are uncertain.

Effect of radiotherapy, immediate dentin sealing and irrigation simulating single- or two-visits endodontic treatment on the bond strength to pulp chamber dentin: an in vitro study.

This study aimed to evaluate the influence of radiotherapy and different endodontic treatment protocols on the bond strength to pulp chamber dentin. Eighty mandibular molars were randomly divided into two groups (n = 40): non-irradiated and irradiated (60 Gy). The pulp chambers were sectioned, and each group was subdivided (n = 8), according to the endodontic treatment protocol: no treatment (Control); Single-visit; Two-visits; Immediate dentin sealing (IDS) + single-visit; and IDS + two-visits. Each endodontic treatment visit was simulated through irrigation with 2.5% NaOCl, 17% EDTA and distilled water. IDS was performed by actively applying two coats of a universal adhesive to the lateral walls of the pulp chamber. After, the pulp chambers were restored with resin composite and four sticks were obtained for microtensile test. In addition, the dentin of the pulp chamber roof was assessed for surface roughness, chemical composition, and topography after each treatment protocol. Two-way ANOVA, Tukey's post hoc, Mann-Whitney, Kruskal-Wallis and Dunn's post hoc were performed (α = 5%). The treatment protocol affected bond strength (p < 0.05), while the irradiation did not (p > 0.05). The control group presented the highest values (p < 0.05). The single-visit group demonstrated better performance compared to the other groups (p < 0.05), which did not differ from each other (p > 0.05) The use of IDS changed the surface roughness (p < 0.05), chemical composition (p < 0.05) and topography of the dentin. In conclusion, the treatment protocol influenced dentin adhesion, while irradiation did not.

Effect of calcium hypochlorite and sodium thiosulfate on the bond strength to pulp chamber dentin: A laboratory investigation.

This study aimed to compare the effect of sodium hypochlorite (NaOCl) and calcium hypochlorite [Ca(OCl)2 ] on the bond strength to pulp chamber dentin when followed or not by the use of sodium thiosulfate (Na2 S2 O3 ). The pulp chamber of fifty human molars were divided into five groups (n = 10) according to the immersion protocol: 2.5% NaOCl; 2.5% NaOCl + 5% Na2 S2 O3 ; 2.5% Ca(OCl)2 ; 2.5% Ca(OCl)2 + 5% Na2 S2 O3 ; and 0.9% sodium chloride (NaCl; control). Subsequently, the samples were restored with resin composite. Three sticks each were obtained and subjected to microtensile testing. SEM/EDS analyses of the pulp chamber roof (n = 8) were carried out for mineral quantification. Elemental analysis data were investigated via one-way ANOVA and Tukey's post hoc, and bond strength data by post hoc pairwise comparisons using the Kruskal-Wallis test. Use of 2.5% NaOCl was associated with the lowest value of bond strength, while 2.5% Ca(OCl)2 had similar bond strength to that of the 0.9% NaCl control. Using 5% Na2 S2 O3 was able to increase the bond strength after 2.5% NaOCl, but not after 2.5% Ca(OCl)2 . The group treated only with 2.5% Ca(OCl)2 had a higher Ca/P ratio on the dentin surface. Dentin treated with Ca(OCl)2 was not affected by Na2 S2 O3 and showed bond strength similar to the 0.9% NaCl.

Demographics, smoking status, and systemic health factors associated with apical periodontitis in a Brazilian rural population: a cross-sectional study.

OBJECTIVE: To determine whether the systemic diseases diabetes mellitus (DM) and arterial hypertension (AH), and smoking status are associated with apical periodontitis (AP) in a representative rural population. MATERIALS AND METHODS: Cross-sectional study using a representative sample of individuals obtained from a population-based epidemiological survey carried out in the rural area of the city of Rosário do Sul, RS, Brazil, from March 2015 to May 2016. Data were collected through structured questionnaires and clinical examination. Binary logistic regression analysis was performed to identify variables independently associated with AP. RESULTS: Of the 584 individuals included in the study, 353 (60.4%) had AP. The presence of AP was independently associated with age ≥ 40 years (odds ratio [OR] = 1.867, 95% confidence interval [CI]: 1.193-2.923, p = 0.006), non-white ethnicity (OR = 1.509, 95% CI: 1.029-2.115, p = 0.035), active or former smoker (OR = 2.087, 95% CI: 1.241-3.510, p = 0.006) and DM or prediabetes (OR = 1.676, 95% CI: 1.150-2.443, p = 0.007). CONCLUSION: The study identified significant associations between AP and demographics, smoking status, and systemic disease in a Brazilian rural population. CLINICAL RELEVANCE: The study emphasized the significance of comprehending and managing associated factors in preventing and treating AP.

Apical periodontitis and associated factors in a rural population of southern Brazil: a multilevel analysis.

OBJECTIVES: This study aims to evaluate the association between apical periodontitis (AP) and sociodemographic/clinical factors in a probability sample of individuals living in a rural area of southern Brazilian. MATERIALS AND METHODS: A cross-sectional study was conducted involving 584 non-edentulous adult individuals who had undergone a full-mouth radiographic survey. Periapical status was analysed using the periapical index (PAI). Endodontic status was evaluated considering the occurrence of voids in the filling material and the root filling length. Crown status was classified based on the presence of caries, restorations, and prosthetic crowns. Sociodemographic variables, frequency of dental care, and periodontal disease were also registered. The data were analysed using hierarchical multilevel Poisson regression analysis. The multilevel structure was composed of three models: sociodemographic variables, clinical variables, and clinical variables adjusted by sociodemographic variables (α = 5%). RESULTS: The prevalence of AP in the sample was 60.45%. AP was significantly associated with age, skin colour, schooling, periodontal disease, and frequency of dental care (P < 0.005). Among the 10,396 teeth evaluated, 868 (8.35%) had AP, which was significantly associated with tooth group, dental arch, crown status, and endodontic treatment (P < 0.005). CONCLUSIONS: The prevalence of AP was high in the population studied. An older age, black/brown skin colour, low level of schooling, infrequent dental care, severe periodontal disease, mandibular teeth, posterior teeth, inadequate crown status, and having undergone endodontic treatment were significantly associated with the outcome. Clinical relevance This study about a rural probability sample reinforces that AP is still a recurrent oral health problem.

Premixed calcium silicate-based root canal sealers have better biological properties than AH Plus: A systematic review and meta-analysis of in vivo animal studies and in vitro laboratory studies.

Objectives: The aim was to determine whether premixed calcium silicate-based root canal sealers have better biological properties than AH Plus. Materials and Methods: Searches of studies published up to January 2023 were performed in the PubMed/MEDLINE and EMBASE and via other methods (databases of the International Endodontic Journal, Journal of Endodontics, and gray literature). The inclusion criteria were in vivo animal and in vitro studies that analyzed the response in the dorsal subcutaneous tissue of rats, cell viability, and genotoxicity. Systematic Review Centre for Laboratory Animal Experimentation Risk of Bias (RoB) tool for in vivo studies and modified CONSORT checklist for in vitro were appraised. Meta-analysis was performed using the Stata. Results: Fifty-two studies were included. In the RoB, in vivo studies fulfilled 20%-50% of the items and in vitro 60%-100%. The studies included in the meta-analysis demonstrated better histocompatibility with the premixed calcium silicate-based sealers at 30 days and greater cell viability with these sealers when used in undiluted extracts in experimental period of 72 h and in extracts with 1:2 and 1:4 dilution in 24 and 72 h. In contrast, no difference between materials was found concerning genotoxicity. Conclusion: Premixed calcium silicate-based root canal sealers have better histocompatibility and are less cytotoxic than the epoxy resin-based sealer AH Plus, demonstrating favorable biological behavior.

Efficacy of calcium hypochlorite in disinfection of gutta-percha cones contaminated with Candida albicans.

This study aimed to compare the efficacy of 2.5% sodium hypochlorite (NaOCl), 2.5% calcium hypochlorite [Ca(OCl)2], and 2% chlorhexidine (CHX) in the rapid disinfection of gutta-percha cones contaminated with Candida albicans. The minimum inhibitory and minimum fungicidal concentrations of each solution for C. albicans were determined and the ability of each solution to destroy and inhibit biofilm in culture wells was tested. In addition, ninety-eight gutta-percha cones contaminated with the fungal suspension were disinfected according to the type of solution (2.5% NaOCl, 2.5% Ca(OCl)2 or 2% CHX) in its different application methods (without agitation, ultrasonic agitation or agitation with Easy Clean), and regarding the exposure time to each irrigating solution (1 or 5 min). Next, the samples were checked for turbidity and evaluation of viable colonies. The compounds that showed the best performance in biofilm destruction were NaOCl and Ca(OCl)2 at a concentration of 2xMIC (p < 0.001). Regarding inhibited biofilm, the only compound that was effective at all MIC concentrations tested was 2.5% Ca(OCl)2 (p < 0.0001). Regarding the viable colonies, all solutions were effective concerning the control group, for all application methods, in 1 and 5 min (p < 0.05). The densitometer reading showed that CHX was the only effective solution in all application methods performed (p < 0.05). The results demonstrate that all tested solutions were effective in the rapid decontamination of cones contaminated with C. albicans.

Effect of glide path instruments in cyclic fatigue resistance of reciprocating instruments after three uses.

The present study aims to evaluate the effect of different glide path instruments on the cyclic fatigue resistance of reciprocating endodontic instruments after three uses in mandibular molars. Eighteen Wave One Gold Primary reciprocating instruments were selected and randomly divided into three groups according to the glide path instrument: G1 - manual file K #15, G2 - Wave One Glider reciprocating instrument, and G3 (control group) - glide path was not performed. The reciprocating instruments were tested on mandibular molars and subdivided into three other groups: a new instrument, an instrument with a previous single-use, and an instrument with two previous uses. After the endodontic instrumentation, the instruments were subjected to the cyclic fatigue resistance test using an appropriate tool. The data were submitted to the Shapiro-Wilk test, and subsequently the Kruskal-Wallis test with a significance level of 5%. The results showed no statistical difference between the groups. Thus, it was concluded that the creation of a glide path did not affect the cyclic fatigue resistance of the reciprocating instrument. In addition, the reuse of final preparation instruments up to two times proved to be safe since no fractures were observed in the tested instruments.

Effect of sodium/calcium hypochlorite on adhesion and adaptation of fiber posts luted with a dual resin cement.

This study aimed to evaluate the effect of different concentrations of sodium hypochlorite (NaOCl) and calcium hypochlorite [Ca(OCl)2] on the bond strength and adaptation of glass fiber posts luted with a dual-curing resin cement. Fifty decoronated premolars were sectioned 14 mm from the apex and endodontically treated. The root canal filling was partially removed. The specimens were divided into 5 groups (n=10) according to the irrigant for post space irrigation: 0.9% sodium chloride (NaCl), (control); 2.5% NaOCl; 5.25% NaOCl; 2.5% Ca(OCl)2; and 5.25% Ca(OCl)2. For each group, irrigation was performed with 5 ml of solution. Afterward, the posts were luted with a dual-curing resin cement. One slice from each third was obtained and submitted to the push-out test and failure modes analysis. An additional slice from the middle third was submitted to confocal images for analysis of adaptation failures (gaps). Two-way ANOVA, Tukey's post-hoc, Kruskal-Wallis with Bonferroni adjusted, and chi-square tests, analyzed data. The group treated with 5.25% NaOCl showed lower bond strength values and generated more cohesive failures compared to the control (p < 0.05). Bond strength decreased from coronal to apical in the post space (p < 0.001). The groups treated with NaOCl had the highest percentages of gaps compared to the control (p < 0.05). Regardless of concentration, Ca(OCl)2 did not influence the bond strength and the occurrence of gaps (P > 0.05). Ca(OCl)2 is a good option for irrigating the post space before luting a fiber post with a dual-curing resin cement.

Interactions Between Calcium Hypochlorite and Irrigants Commonly Used in Endodontic Practice: A Chemical Analysis.

INTRODUCTION: This study aimed to identify possible products resulting from chemical interactions between calcium hypochlorite (Ca[OCl]2) and other irrigants for endodontic use using electrospray ionization quadrupole time-of-flight mass spectrometry. METHODS: The 5.25% Ca(OCl)2 was associated with either 70% ethanol solution, distilled water, saline solution (0.9% sodium chloride), 5% sodium thiosulfate, 10% citric acid, 17% ethylenediaminetetraacetic acid (EDTA), or 2% chlorhexidine (CHX). The reaction ratio was 1:1 and the products obtained were analyzed by electrospray ionization quadrupole time-of-flight mass spectrometry. RESULTS: The interactions between Ca(OCl)2 and CHX generated an orange-brown precipitate, without identification of para-chloroaniline and between Ca(OCl)2 and sodium thiosulfate, a milky-white precipitate. Furthermore, when the oxidizing agent was associated with EDTA and citric acid, chlorine gas was released. As for the other associations, 70% ethanol, distilled water, and saline solution, no precipitation or gas release occurred. CONCLUSIONS: The orange-brown precipitate occurs due to the chlorination of guanidine nitrogens, and the milky-white precipitate is due to the partial neutralization of the oxidizing agent. The release of chlorine gas occurs due to the low pH of the mixture, which results in the rapid formation and decomposition of chlorine. In this context, an intermediate rinsed with distilled water, saline solution, and ethanol between Ca(OCl)2 and CHX, citric acid, and EDTA seems to be appropriate to prevent the formation of by-products when these irrigants need to be used in the canal. Furthermore, if it is necessary to use sodium thiosulfate, a larger volume of the solution must be used compared to that used for the oxidizing solution.

Influence of height discrepancy between pulp chamber floor and crestal bone in the mechanical fatigue performance of endodontically-treated teeth restored with resin composite endocrowns.

OBJECTIVE: To explore and characterize the effect of the discrepancy between crestal bone height (CB) and pulp chamber floor (PCF) in the fatigue performance of endodontically-treated teeth rehabilitated with an endocrown restoration. MATERIALS AND METHODS: A total of 75 human molars free of defects, caries history or cracks were selected, then endodontically treated and randomly allocated into 5 groups (N = 15) according to the difference between PCF and CB, as follows: PCF 2 mm above, PCF 1 mm above, PCF leveled, PCF 1 mm below and PCF 2 mm below. Endocrown restorations were made with composite resin (Tetric N-Ceram, shade B3, Ivoclar) in 1.5 mm thickness and luted with a resin cement (Multilink N, Ivoclar) onto the dental elements. Monotonic testing was performed to define the fatigue parameters, and a cyclic fatigue test was used until failure of the assembly. The collected data were submitted to statistical survival analysis (Kaplan-Meier followed by Mantel-Cox and Weibull), fractographic analysis and finite element analysis (FEA) were performed as complementary analyzes. RESULTS: The PCF 2 mm below and PCF 1 mm below groups presented the best results regarding fatigue failure load (FFL) and number of cycles for failure (CFF) (p < 0.05), but presented no difference between each other (p > 0.05). The PCF leveled and PCF 1 mm above groups presented no statistical difference between them (p > 0.05), but performed better than the PCF 2 mm above group (p < 0.05). The rate of favorable failures of PCF 2 mm above, PCF 1 mm above, PCF leveled, PCF 1 mm below and PCF 2 mm below groups were 91.7%, 100%, 75%, 66.7% and 41.7%, respectively. FEA showed different stress magnitudes according to the pulp-chamber design. CONCLUSION: The insertion level of the dental element to be rehabilitated with an endocrown interferes in the mechanical fatigue performance of the set. The discrepancy between the CB height and the PCF has a direct effect, where the higher the PCF in relation to the CB, the greater the risk of mechanical failure of the restored dental element.

Does ultrasonic activation improve the bond strength and root canal filling quality of endodontic sealers?

This study aimed to investigate the effect of ultrasonic activation (UA) of three endodontic sealers on the bond strength to root dentin and root canal filling quality. Ninety six bovine incisors were instrumented and root canal filling was carried out using AH Plus (AP), Sealer Plus (SP), or Sealer Plus BC (BC), with or without UA (n=16/group). Two 1.5-mm slices were obtained from each root third. The first slice was subjected to push-out testing and failure mode analysis, while the second was observed under a stereomicroscope for filling quality assessment. Data were analyzed by Kruskal-Wallis, Mann-Whitney and Friedman tests (α=0.05). SP showed higher bond strength and fewer voids than BC in the apical third and when root thirds data were pooled. SP also had higher bond strength compared with AH Plus in the apical third. UA improved the bond strength when BC was used but did not affect the filling quality of any sealer. There were no significant differences between the ultrasonically activated sealers regarding bond strength and filling quality. When root thirds were compared, the bond strength was similar along the root, but there was a tendency to worsen filling quality, with more voids, in the apical segment. In conclusion, UA was effective in increasing the bond strength of the calcium silicate-based sealer but did not improve its filling quality. For the epoxy resin-based sealers, these properties were not affected by UA.

Outcome of endodontic treatments performed by Brazilian undergraduate students: 3- to 8-year follow up.

Objectives: This study aimed to evaluate the success rate of endodontic treatments performed by undergraduate students and the factors associated with the outcome. Materials and Methods: A follow-up of 3 to 8 years after root canal filling was carried out in 91 patients. At the follow-up visits, medical and dental history questionnaires were applied along with clinical and radiographic examinations. Data collected in the clinical exam included: the presence of pain, swelling, sinus tract, mobility, tenderness to palpation and percussion, periodontal probing profile, and type/quality of coronal restoration. Postoperative and follow-up radiographs were digitalized and analyzed by 2 trained and calibrated examiners to assess periapical healing. The treatment outcome was based on strict clinical and radiographic criteria and classified as success (absence of any clinical and radiographic sign of apical periodontitis) or failure (other combination). Logistic regression was used to investigate the impact of clinical and radiographic variables on endodontic treatment outcomes at a 5% significance level. Results: The success rate of endodontic treatments was 60.7%. The only risk factor significantly associated with failure was the presence of a periapical lesion on the postoperative radiograph (odds ratio, 3.35; 95% confidence interval, 1.17-9.54). Conclusions: The success rate of endodontic treatments performed by undergraduate students was low and was jeopardized by the presence of a periapical lesion on the postoperative radiograph.

Low-dose Multidetector Computed Tomographic and Cone-beam Computed Tomographic Protocols for Volumetric Measurement of Simulated Periapical Lesions.

INTRODUCTION: The purpose of this study was to evaluate the accuracy of low-dose multidetector computed tomographic (LD-MDCT) imaging for the volumetric measurement of simulated periapical lesions. METHODS: Eighteen monoradicular teeth were introduced in bone blocks, and periapical lesions were simulated at the periapical region of each tooth. All teeth were imaged using 4 acquisition protocols: large (dentoalveolar) field of view (FOV) cone-beam computed tomographic (CBCT) imaging (120 kV, 5 mA, and 0.2-mm voxel), small (dental) FOV CBCT imaging (90 kV, 10 mA, and 0.2-mm voxel), standard multidetector computed tomographic imaging (120 kV, 50 mA, and 0.62-mm voxel), and LD-MDCT imaging (120 kV, 10 mA, and 0.62-mm voxel). Tomographic images were evaluated by a single trained and calibrated examiner (intraclass correlation coefficient = 0.991) using ITK-SNAP segmentation software (University of Pennsylvania, Philadelphia, PA). The gold standard was obtained by the impressions of the lesions with regular fluid addition silicone and individual weighing using a precision analytical scale. Data were evaluated by the repeated measures analysis of variance test; the significance level was defined as P < .05. RESULTS: No statistical differences (P > .05) were found among the groups regardless of the device, milliamperage, FOV, or voxel size. CONCLUSIONS: LD-MDCT shows performance comparable with other standard reference methods for measuring the volume of periapical lesions and can be a useful and safe protocol in clinical situations in which CBCT imaging is not available, such as in cases of patients admitted to hospitals.

High-fat diet effect on periapical lesions and hepatic enzymatic antioxidant in rats.

AIMS: To evaluate the effects of a high-fat diet (HFD) on the progression of apical periodontitis (AP), local inflammation, systemic antioxidant status, and blood lipid profile in rats. MAIN METHODS: Sixteen male Wistar rats were fed a standard diet (SD) or a HFD. At the sixth experimental week, the pulp chambers of the mandibular first molars were exposed to develop AP. A glucose tolerance test was performed the week before euthanasia. At the tenth experimental week, the animals were euthanized and the livers were collected to estimate catalase (CAT) and reduced glutathione (GSH) levels. Blood was acquired for biochemical analysis. The size of AP was estimated from radiographs and described as AP size-to-body weight ratio; inflammatory grade of AP was determined by histological analysis. KEY FINDINGS: At the end of the experimental period, the rats fed the HFD had 30% less weight (P < 0.0001) and higher blood glucose levels after 30 min of sucrose intake (P < 0.05) than those fed the SD. Animals from the HFD group had lower levels of CAT (P < 0.01), but the same was not observed in the GSH levels. Plasma insulin and total cholesterol were not affected by the diet. The rats fed the HFD presented greater AP than those fed the SD (P < 0.05). However, the local inflammatory infiltrate was similar in both groups. SIGNIFICANCE: The alterations promoted by the consumption of a HFD were not only observed systemically, but also locally, producing greater AP in rats than a SD.

Effect of Ultrasonic Activation of Endodontic Sealers on Intratubular Penetration and Bond Strength to Root Dentin.

INTRODUCTION: This study aimed to evaluate the effect of ultrasonic activation (UA) of endodontic sealers on dentin tubule penetration and the bond strength to root dentin. METHOD: One hundred single-rooted teeth were prepared with 40.06 nickel-titanium instruments and divided into 2 groups: with or without UA. Three resin-based sealers (MTA Fillapex [Angelus Dental Solutions, Londrina, PR, Brazil], Sealer Plus [MK Life Medical and Dental Products, Porto Alegre, RS, Brazil], and AH Plus [Dentsply, DeTrey GmbH, Konstanz, Germany]; n = 20) and 2 calcium silicate-based sealers (Sealer Plus BC [MK Life Medical and Dental Products] and EndoSequence BC [Brasseler, Savannah, GA], n = 20) were used and subdivided (n = 10) according to the protocols. Fluo-3 (Thermo Fisher Scientific, Waltham, MA) and rhodamine B dyes were added to the calcium silicate- and resin-based sealers, respectively. In the UA groups, the activation was performed for 40 seconds followed by lateral compaction. Samples were transversely sectioned to evaluate the dentin tubule penetration and the bond strength to root dentin. The penetration data were analyzed with the Student t test, 1-factor analysis of variance, and Bonferroni tests. Bond strength was evaluated using the Student t test, Kruskal-Wallis, and Dunn post hoc test. RESULTS: Resin-based sealers showed the highest tubule penetration without UA (P < .05). UA significantly enhanced MTA Fillapex and Endosequence BC dentin tubule penetration (P < .05). AH Plus and Sealer Plus BC improved their bond strength to root dentin after UA (P < .05). AH Plus/UA, Sealer Plus/UA, and Sealer Plus BC/UA presented the highest bond strength values (P < .05). Adhesive failures were predominant in all groups regardless of the use of ultrasound. CONCLUSIONS: UA interferes with tubule penetration and the bond strength to root dentin of resin- and calcium silicate-based sealers.

Detectability of Middle Mesial Canal in Mandibular Molar After Troughing Using Ultrasonics and Magnification: An Ex Vivo Study.

The aim of this study was to evaluate the frequency of the identification of middle mesial (MM) canals in extracted permanent first and second mandibular molars before and after executing a troughing technique with high magnification. Sample consisted of 105 mandibular molars. After gaining access to the pulp chamber and cleaning the chamber floor, root canals were detected in three different stages. The initial location was performed under direct viewing without magnification. In the second stage, a dental operating microscope was employed at 12 magnification. If the MM canal was not observed, a standardized troughing technique was executed with the use of an ultrasonic tip between the mesiobuccal and mesiolingual canals under magnification. Statistical differences in the frequency of MM canals before and after troughing were determined using McNemar's test, with the significance level set at 5%. No significant increase in the identification of the MM canal was found when comparing observations before (9.52%) and after (12.38%) the troughing technique under high magnification. However, viewing under magnification and the execution of troughing significantly increased the location of the MM canal (12.38%) when compared to viewing without magnification (3.81%) (p<0.01). The troughing technique with the aid of a dental operating microscope significantly improved the identification of MM canals compared to viewing without magnification. Troughing is a safe, minimally invasive procedure that benefits the treatment of mandibular molars.

Effect of sodium hypochlorite and calcium hypochlorite on the apical sealing ability of endodontic sealers

Aim: This study aimed to compare the influence of sodium hypochlorite (NaOCl) and calcium hypochlorite [Ca(OCl)2 ] on the apical sealing capacity of AH Plus (Dentsply Maillefer) and Bio-C Sealer (Angelus) endodontic sealers. Methods: Sixty permanent human lower incisors were randomly allocated (http://www.randomized.org), according to the irrigant used, into three groups (n=20): 0.9% sodium chloride (NaCl/Control); 2.5% NaOCl; and 2.5% Ca(OCl)2 . The root canal was prepared with rotary files under 10 mL of the solution corresponding to the experimental group. Each group was subdivided into two (n=10) according to the sealer used for filling: AH Plus (Dentsply Maillefer) or Bio-C Sealer (Angelus). Then, all samples were immersed in black India ink for one week. After the storage period, the roots were then grooved longitudinally and split, and the ink penetration was measured from the apical part to the coronal part of the root canal into which the ink penetrated using a stereomicroscope. Data were analyzed by one-way ANOVA and Tukey's post-hoc tests. Results: There was no statistical difference in ink penetration between the different endodontic sealers tested for the same irrigating solution (p > 0.05). However, when the Bio-C Sealer (Angelus) was used, the group treated with 2.5% Ca(OCl)2 was associated with lower values of apical leakage, compared to 2.5% NaOCl (p < 0.05). For the AH Plus sealer (Dentsply Maillefer), there was no difference between the irrigants (p > 0.05). Conclusions: Associating Ca(OCl)2 irrigant with Bio-C Sealer (Angelus) seems to be a good option to reduce apical leakage

Effect of glide path instruments in cyclic fatigue resistance of reciprocating instruments after three uses

Abstract The present study aims to evaluate the effect of different glide path instruments on the cyclic fatigue resistance of reciprocating endodontic instruments after three uses in mandibular molars. Eighteen Wave One Gold Primary reciprocating instruments were selected and randomly divided into three groups according to the glide path instrument: G1 - manual file K #15, G2 - Wave One Glider reciprocating instrument, and G3 (control group) - glide path was not performed. The reciprocating instruments were tested on mandibular molars and subdivided into three other groups: a new instrument, an instrument with a previous single-use, and an instrument with two previous uses. After the endodontic instrumentation, the instruments were subjected to the cyclic fatigue resistance test using an appropriate tool. The data were submitted to the Shapiro-Wilk test, and subsequently the Kruskal-Wallis test with a significance level of 5%. The results showed no statistical difference between the groups. Thus, it was concluded that the creation of a glide path did not affect the cyclic fatigue resistance of the reciprocating instrument. In addition, the reuse of final preparation instruments up to two times proved to be safe since no fractures were observed in the tested instruments.

Resumo O objetivo do presente estudo foi avaliar a relação de diferentes instrumentos de glide path na resistência à fadiga cíclica de instrumentos endodônticos reciprocantes de preparo final após três utilizações em molares inferiores. Foram selecionados 18 instrumentos reciprocantes Wave One Gold Primary e divididos de maneira randomizada em três grupos: G1 - glide path utilizado foi uma lima manual K #15, G2 - glide path utilizado foi um instrumento reciprocante Wave One Glider, e G3 (controle) - sem utilização de glide path. Os instrumentos foram testados em molares inferiores e subdivididos em outros três grupos: instrumento novo, instrumento com um uso prévio e instrumento com dois usos prévios. Após os testes, os instrumentos foram submetidos ao teste de resistência à fadiga cíclica por meio de uma ferramenta própria para esse uso. Os dados encontrados foram submetidos ao teste de Shapiro-Wilk para avaliar a normalidade na distribuição da amostra, e posteriormente ao teste de Kruskal-Wallis com nível de significância de 5%. Os resultados demonstraram não haver diferença estatística entre os grupos testados. Com isso, concluiu-se que a criação de um glide path não possuiu efeito na resistência à fadiga cíclica do instrumento reciprocante de preparo final. O instrumento reciprocante de preparo final foi utilizado, e posteriormente reutilizado de maneira segura em três dentes posteriores, visto a não ocorrência de fratura em nenhum dos grupos testados.