Voronoi Tessellation as a Tool for Predicting the Formation of Deep Eutectic Solvents.

Deep eutectic solvents (DESs) have attracted increasing attention in recent years due to their broad applicability in different fields, but their computer-aided discovery, which avoids a time-consuming trial-and-error investigation, is still lagging. In this paper, a set of nine DESs, composed of choline chloride as a hydrogen-bond acceptor and nine functionalized phenols as hydrogen bond donors, is simulated by using classical molecular dynamics to investigate the possible formation of a DES. The tool of the Voronoi tessellation analysis is employed for producing an intuitive and straightforward representation of the degree of mixing between the different components of the solutions, therefore permitting the definition of a metric quantifying the propensity of the components to produce a uniform solution. The computational findings agree with the experimental results, thus confirming that the Voronoi tessellation analysis can act as a lightweight yet powerful approach for the high-throughput screening of mixtures in the optics of the new DES design.

Asymmetrical Diketopyrrolopyrrole Derivatives with Improved Solubility and Balanced Charge Transport Properties.

The diketopyrrolopyrrole (DPP) unit represents one of the building blocks more widely employed in the field of organic electronics; in most of the reported DPP-based small molecules, this unit represents the electron acceptor core symmetrically coupled to donor moieties, and the solubility is guaranteed by functionalizing lactamic nitrogens with long and branched alkyl tails. In this paper, we explored the possibility of modulating the solubility by realizing asymmetric DPP derivatives, where the molecular structure is extended in just one direction. Four novel derivatives have been prepared, characterized by a common dithyenil-DPP fragment and functionalized on one side by a thiophene unit linked to different auxiliary electron acceptor groups. As compared to previously reported symmetric analogs, the novel dyes showed an increased solubility in chloroform and proved to be soluble in THF as well. The novel dyes underwent a thorough optical and electrochemical characterization. Electronic properties were studied at the DFT levels. All the dyes were used as active layers in organic field effect transistors, showing balanced charge transport properties.

Novel Thienyl DPP derivatives Functionalized with Terminal Electron-Acceptor Groups: Synthesis, Optical Properties and OFET Performance.

Three novel diketopyrrolopyrrole (DPP) based small molecules have been synthesized and characterized in terms of their chemical-physical, electrochemical and electrical properties. All the molecules consist of a central DPP electron acceptor core symmetrically functionalized with donor bi-thienyl moieties and flanked in the terminal positions by three different auxiliary electron-acceptor groups. This kind of molecular structure, characterized by an alternation of electron acceptor and donor groups, was purposely designed to provide a significant absorption at the longer wavelengths of the visible spectrum: when analysed as thin films, in fact, the dyes absorb well over 800 nm and exhibit a narrow optical bandgap down to 1.28 eV. A detailed DFT analysis provides useful information on the electronic structure of the dyes and on the features of the main optical transitions. Organic field-effect transistors (OFETs) have been fabricated by depositing the DPP dyes as active layers from solution: the different end-functionalization of the dyes had an effect on the charge-transport properties with two of the dyes acting as n-type semiconductors (electron mobility up to 4.4 ⋅ 10-2  cm2 /V ⋅ s) and the third one as a p-type semiconductor (hole mobility up to 2.3 ⋅ 10-3  cm2 /V ⋅ s). Interestingly, well-balanced ambipolar transistors were achieved by blending the most performant n-type and p-type dyes with hole and electron mobility in the order of 10-3  cm2 /V ⋅ s.

Design of a New Chiral Deep Eutectic Solvent Based on 3-Amino-1,2-propanediol and Its Application in Organolithium Chemistry.

A chiral glycerol derivative, namely 3-amino-1,2-propanediol, was employed for as the hydrogen bond donor (HBD) in the design of a new deep eutectic solvent (DES) with choline chloride acting as the hydrogen bond acceptor (HBA). The novel mixture was characterized and unambiguously classified as a DES. Furthermore, its synthetic usefulness was demonstrated in the room-temperature n-butyllithium-addition under air to carbonyl compounds and benzyl chloride. In some cases, pure products (100% conversion) were obtained by a simple extractive work-up in up to 72% isolated yield, thus suggesting the potential practical usefulness of this procedure as a green alternative to the classical Schenk procedure in volatile organic solvents for the synthesis of tertiary alcohols. The chirality of the HBD, bearing an interesting basic primary amino group, is an intriguing feature currently under investigation for further exploitation.

Copper-Free Halodediazoniation of Arenediazonium Tetrafluoroborates in Deep Eutectic Solvents-like Mixtures.

Deep Eutectic Solvent (DES)-like mixtures, based on glycerol and different halide organic and inorganic salts, are successfully exploited as new media in copper-free halodediazoniation of arenediazonium salts. The reactions are carried out in absence of metal-based catalysts, at room temperature and in a short time. Pure target products are obtained without the need for chromatographic separation. The solvents are fully characterized, and a computational study is presented aiming to understand the reaction mechanism.

Recent Advances in the Synthesis of Inorganic Materials Using Environmentally Friendly Media.

Deep Eutectic Solvents have gained a lot of attention in the last few years because of their vast applicability in a large number of technological processes, the simplicity of their preparation and their high biocompatibility and harmlessness. One of the fields where DES prove to be particularly valuable is the synthesis and modification of inorganic materials-in particular, nanoparticles. In this field, the inherent structural inhomogeneity of DES results in a marked templating effect, which has led to an increasing number of studies focusing on exploiting these new reaction media to prepare nanomaterials. This review aims to provide a summary of the numerous and most recent achievements made in this area, reporting several examples of the newest mixtures obtained by mixing molecules originating from natural feedstocks, as well as linking them to the more consolidated methods that use "classical" DES, such as reline.

X-Ray structure and ionic conductivity studies of anhydrous and hydrated choline chloride and oxalic acid deep eutectic solvents.

In this study, we report the structural, thermodynamic and electrochemical properties of deep eutectic solvents (DESs) formed from choline chloride and oxalic acid in anhydrous and di-hydrated form in a 1 : 1 molar ratio. As far as we are aware, this is the first joint X-ray diffraction-molecular dynamics study focussed on analyzing the structural features of DESs.

Intriguing transport dynamics of ethylammonium nitrate-acetonitrile binary mixtures arising from nano-inhomogeneity.

Binary mixtures of ethylammonium nitrate and acetonitrile show interesting properties that originate from the structural and dynamical nano-heterogeneity present in ionic liquids. These effects are most pronounced when the ionic liquid is the minority compound. In this study the transport properties of such mixtures are studied, including viscosity, self-diffusion and conductivity. The results strongly support the presence of structural inhomogeneity and show an interesting composition-dependent behaviour in the mixtures.

Adsorption Behavior of I3- and I- Ions at a Nanoporous NiO/Acetonitrile Interface Studied by X-ray Photoelectron Spectroscopy.

The adsorption of I- and I3- anions, i.e., the two species constituting the most common redox couple of dye-sensitized solar cells (DSCs), onto the surface of screen-printed nanoporous NiO was studied by means of X-ray photoelectron spectroscopy (XPS). Nanoporous NiO films were deposited on transparent metallic fluorine-doped tin oxide (FTO) and polarized as working electrodes in a three-electrode cell with differently concentrated I-/I3- electrolytes to simulate the different conditions experienced by the NiO cathodes during the lifecycle of a p-type DSC (p-DSC) at those atomic sites not passivated by the dye. Bare NiO films were tested also as photocathodes of nonsensitized p-DSCs. The ex situ XPS analysis of I 4d ionization region of both reference and electrochemically treated NiO films showed that the presence of native and electrochemically generated Ni3+ and Ni4+ centers induces fast adsorption/desorption of I- ions and catalyzes their oxidation to I3- ions. The adsorption phenomena generated by I- and I3- species on nanoporous NiO electrodes can also induce an effect of electrochemical passivation toward a fraction of charged Ni sites. Such an effect would render these sites inactive for the further realization of those photoelectrochemical processes at the basis of the operation of a p-DSC.

Modulation of [CuOH/O]+ Properties in [2,2'-Bipyridine]2 Homoleptic Complexes through Substitution at the 6,6' Position by Methyl Groups.

In this paper, data from a DFT-based computational study on the reactivity of [Cu(2,2'-S-bpy)2]+PF6- (S indicating substitution by methyl groups at the 6 and/or 6' position and ranging from 0 to 100% through 50%) homoleptic complexes based toward tButOOH were presented. Computational results, supported by cyclic voltammetry analysis, prove the feasibility of finely tuning the chemical properties of the complexes and their reactivity by means of insertion of methyl moieties in selected positions within the bipyridine scaffold.

Recycling of Commercially Available Biobased Thermoset Polyurethane Using Covalent Adaptable Network Mechanisms.

Until recently, recycling thermoset polyurethanes (PUs) was limited to degrading methods. The development of covalent adaptable networks (CANs), to which PUs can be assigned, has opened novel possibilities for actual recycling. Most efforts in this area have been directed toward inventing new materials that can benefit from CAN theory; presently, little or nothing has been applied to industrially producible materials. In this study, both an industrially available polyol (Sovermol780®) and isocyanate (Tolonate X FLO 100®) with percentages of bioderived components were employed, resulting in a potentially scalable and industrially producible material. The resultant network could be reworked up to three times, maintaining the crosslinked structure without significantly changing the thermal properties. Improvements in mechanical parameters were observed when comparing the pristine material to the material exposed to three rework processes, with gains of roughly 50% in elongation at break and 20% in tensile strength despite a 25% decrease in Young's modulus and crosslink density. Thus, it was demonstrated that theory may be profitably applied even to materials that are not designed including additional bonds but instead rely just on the dynamic urethane bond that is naturally present in the network.

Quinoid-Thiophene-Based Covalent Organic Polymers for High Iodine Uptake: When Rational Chemical Design Counterbalances the Low Surface Area and Pore Volume.

A novel 2D covalent organic polymer (COP), based on conjugated quinoid-oligothiophene (QOT) and tris(aminophenyl) benzene (TAPB) moieties, is designed and synthesized (TAPB-QOT COP). Some DFT calculations are made to clarify the equilibrium between different QOT isomers and how they could affect the COP formation. Once synthetized, the polymer has been thoroughly characterized by spectroscopic (i.e., Raman, UV-vis), SSNMR and surface (e.g., SEM, BET) techniques, showing a modest surface area (113 m2 g-1) and micropore volume (0.014 cm3 g-1 with an averaged pore size of 5.6-8 Å). Notwithstanding this, TAPB-QOT COP shows a remarkably high iodine (I2) uptake capacity (464 %wt) comparable to or even higher than state-of-the-art porous organic polymers (POPs). These auspicious values are due to the thoughtful design of the polymer with embedded sulfur sites and a conjugated scaffold with the ability to counterbalance the relatively low pore volumes. Indeed, both morphological and Raman data, supported by computational analyses, prove the very high affinity between the S atom in our COP and the I2. As a result, TAPB-QOT COP shows the highest volumetric I2 uptake (i.e., the amount of I2 uptaken per volume unit) up to 331 g cm-3 coupled with a remarkably high reversibility (>80% after five cycles).

An Integrated Characterization Strategy on Board for Recycling of poly(vinyl butyral) (PVB) from Laminated Glass Wastes.

Polyvinyl butyral (PVB) is widely used as an interlayer material in laminated glass applications, mainly in the automotive industry, but also for construction and photovoltaic applications. Post-consumed laminated glass is a waste that is mainly landfilled; nevertheless, it can be revalorized upon efficient separation and removal of adhered glass. PVB interlayers in laminated glass are always plasticized with a significant fraction in the 20-40% w/w range of plasticizer, and they are protected from the environment by two sheets of glass. In this work, the aim is to develop a thorough characterization strategy for PVB films. Neat reference PVB grades intended for interlayer use are compared with properly processed (delaminated) post-consumed PVB grades from the automotive and construction sectors. Methods are developed to open opportunities for recycling and reuse of the latter. The plasticizer content and chemical nature are determined by applying well-known analytical techniques, namely, FT-IR, TGA, NMR. The issue of potential aging during the life cycle of the original laminated material is also addressed through NMR. Based on the findings, a sensor capable of directly sorting PVB post-consumer materials will be developed and calibrated at a later stage.

Ullmann homocoupling of arenediazonium salts in a deep eutectic solvent. Synthetic and mechanistic aspects.

A deep eutectic solvent (DES) based on glycerol and KF is successfully exploited as a solvent medium in Ullmann homocoupling of arenediazonium salts. The reactions were carried out in mild conditions and target products were obtained in fairly good yields. A computational study is presented aiming to understand the reaction mechanism and Raman spectroscopy is employed as an experimental tool to support it.

A multi-technique approach to unveil the redox behaviour and potentiality of homoleptic CuI complexes based on substituted bipyridine ligands in oxygenation reactions.

The effect of differently substituted 2,2'-bipyridine ligands (i.e. 6,6'-dimethyl-2,2'-bipyridine, 5,5'-dimethyl-2,2'-bipyridine, 6,6'-dimethoxy-2,2'-bipyridine and 2,2'-bipyridine) on the reversible oxidation of the resulting CuI homoleptic complexes is investigated by means of a multi-technique approach (electronic and vibrational spectroscopies, DFT, electrochemistry). Among the four tested complexes, [CuI(6,6'-dimethyl-2,2'-bipyridine)2] (PF6) shows a peculiar behavior when oxidized with an organic peroxide (i.e. tert-butyl hydroperoxide, tBuOOH). The simultaneous use of UV-Vis-NIR and Raman spectroscopy methods and cyclovoltammetry, supported by DFT based calculations, allowed identifying (i) the change in the oxidation state of the copper ion and (ii) some peculiar modification in the local structure of the metal leading to the formation of a [CuIIOH]+ species. The latter, being able to oxidize a model molecule (i.e. cyclohexene) and showing the restoration of the original CuI complex and the formation of cyclohexanone, confirms the potential of these simple homoleptic CuI complexes as model catalysts for partial oxygenation reactions.

Critical Assessment of the Sustainability of Deep Eutectic Solvents: A Case Study on Six Choline Chloride-Based Mixtures.

An outline of the advantages, in terms of sustainability, of Deep Eutectic Solvents (DESs) is provided, by analyzing some of the most popular DESs, obtained by the combination of choline chloride, as a hydrogen bond acceptor, and six hydrogen bond donors. The analysis is articulated into four main issues related to sustainability, which are recurrently mentioned in the literature, but are often taken for granted without any further critical elaboration, as the prominent green features of DESs: their low toxicity, good biodegradability, renewable sourcing, and low cost. This contribution is intended to provide a more tangible, evidence-based evaluation of the actual green credentials of the considered DESs, to reinforce or question their supposed sustainability, also in mutual comparison with one another.

The Effectiveness of Superbolus on Postprandial Blood Glucose Management of Pregnant Women With Type 1 Diabetes.

AIM: Pregnancies of women with pregestational diabetes are at risk of after-meal glucose peaks and late after-meal hypoglycemia, particularly at breakfast. We aimed to explore the effectiveness of a specific feature of insulin pump therapy called superbolus in preventing these glucose swings. METHODS: In this retrospective observational study, we analyzed continuous glucose monitoring data of patients with type 1 diabetes in pregnancy who were advised to use superbolus to manage their breakfast. Some of the postprandial basal insulin delivery was partially reduced and delivered instead as additional insulin bolus on top of a normal bolus. Outcomes of interest were one hour after breakfast glucose levels, the time in glucose range for after breakfast period, the number of late hypoglycemic episodes. RESULTS: Overall, 21 consecutive pregnant women with type 1 diabetes (mean age 34.3 ± 5.5 years, mean pregestational body mass index 23.7 ± 4.7 kg/m2, HbA1c levels during pregnancy 6.1 ± 0.6%) were studied. Superbolus reduced after breakfast glucose peaks (one hour after breakfast glucose levels 130 ± 17 mg/dL vs 123 ± 10 mg/dL before and after superbolus use, respectively, P = .01), improved the time in glucose range for after breakfast period (70.4% vs 50.8%, P = .001), and reduced the number of late hypoglycemic episodes (3 [1-5] vs 1 [0-2], P< .0001). CONCLUSION: Superbolus was effective in avoiding after-meal glucose peaks, increased postprandial glucose time in target, without late hypoglycemia occurrence. It represents a valid option for the treatment of pregnant women with type 1 diabetes using insulin pump.

Assessing the Structure of Protic Ionic Liquids Based on Triethylammonium and Organic Acid Anions.

We present a computational analysis of the short-range structure of three protic ionic liquids based on strong organic acids: trifluoracetate, methanesulfonate, and triflate of triethylammonium. Accurate ab initio computations carried out on the gas-phase dimers show that the protonation of triethylamine is spontaneous. We have identified the anion-cation binding motif that is due to the presence of a strong hydrogen bond and to electrostatic interactions. The strength of the hydrogen bond and the magnitude of the binding energy decrease in the order trifluoroacetate ≳ methanesulfonate > triflate. The corresponding simulations of the bulk phases, obtained using a semiempirical evaluation of the interatomic forces, reveal that on short timescales, the state of the three liquids remains highly ionized and that the gas-phase cation-/anion-binding motif is preserved while no other peculiar structural features seem to emerge.

Polymeric Dopant-Free Hole Transporting Materials for Perovskite Solar Cells: Structures and Concepts towards Better Performances.

Perovskite solar cells are a hot topic of photovoltaic research, reaching, in few years, an impressive efficiency (25.5%), but their long-term stability still needs to be addressed for industrial production. One of the most sizeable reasons for instability is the doping of the Hole Transporting Material (HTM), being the salt commonly employed as a vector bringing moisture in contact with perovskite film and destroying it. With this respect, the research focused on new and stable "dopant-free" HTMs, which are inherently conductive, being able to effectively work without any addition of dopants. Notwithstanding, they show impressive efficiency and stability results. The dopant-free polymers, often made of alternated donor and acceptor cores, have properties, namely the filming ability, the molecular weight tunability, the stacking and packing peculiarities, and high hole mobility in absence of any dopant, that make them very attractive and a real innovation in the field. In this review, we tried our best to collect all the dopant-free polymeric HTMs known so far in the perovskite solar cells field, providing a brief historical introduction, followed by the classification and analysis of the polymeric structures, based on their building blocks, trying to find structure-activity relationships whenever possible. The research is still increasing and a very simple polymer (PFDT-2F-COOH) approaches PCE = 22% while some more complex ones overcome 22%, up to 22.41% (PPY2).