Polysaccharides and phenolics of miscanthus belowground cell walls and their influence on polyethylene composites.

Belowground materials from two miscanthus species were ground into fragments for preparing polyethylene composites. Both species show a lot of similarities in terms of polysaccharides, lignin and cell wall-linked p-coumaric and ferulic acids contents. The structures of polysaccharides and of lignins are markedly different in the miscanthus belowground and aboveground biomass. The non-cellulosic fraction of the samples comprises a high level of xylose, with the arabinose to xylose ratio about twice as high as that observed for analogous stem samples, suggesting that belowground arabinoxylans are more substituted than stem ones. The mechanical properties of the belowground miscanthus-polyethylene composites correlate with several of their compositional traits, with similar trends as for plant stem-polyethylene composites with positive correlations for lignin and p-coumaric acid contents and negative correlations for most non-cellulosic sugars.

Deviation from the grain protein concentration-grain yield negative relationship is highly correlated to post-anthesis N uptake in winter wheat.

In plants, carbon and nitrogen (N) economies are intimately linked at the physiological and biochemical level. The strong genetic negative correlation between grain yield and grain protein concentration observed in various cereals is an illustration of this inter-relationship. Studies have shown that deviation from this negative relationship (grain protein deviation or GPD) has a genetic basis, but its physiological basis is still poorly understood. This study analysed data on 27 genotypes grown in multienvironment field trials, representing a wide range of agricultural practices and climatic conditions. The objective was to identify physiological processes related to the genetic variability in GPD. Under most environments, GPD was significantly related to post-anthesis N uptake independently of anthesis date and total N at anthesis. The underlying physiological trait might be related to genotypic differences in either access to soil N, regulation of N uptake by plant N status, or ability to maintain root activity during the grain-filling period. GPD is an interesting potential target in breeding as it appears to be relatively robust across different environments and would be valuable in increasing total N uptake by maturity.

Using probe genotypes to dissect QTL × environment interactions for grain yield components in winter wheat.

Yield is known to be a complex trait, the expression of which interacts strongly with environmental conditions. Understanding the genetic basis of these genotype × environment interactions, particularly under limited input levels, is a key objective when selecting wheat genotypes adapted to specific environments. Our principal objectives were thus: (1) to identify genomic regions [quantitative trait loci (QTL)] involving QTL × environment interactions (QEI) and (2) to develop a strategy to understand the specificity of these regions to certain environments. The two main components of yield were studied: kernel number (KN) and thousand-kernel weight (TKW). The Arche × Récital doubled-haploid population of 222 lines was grown in replicated field trials during 2000 and 2001 at three locations in France, under two nitrogen levels. The 12 environments were characterized in terms of water deficit, radiation, temperature and nitrogen stress based on measurements conducted on the four-probe genotypes: Arche, Récital, Ritmo and Soissons. A four-step strategy was developed to explain QTL specificity to some environments: (1) the detection of QTL for KN and TKW in each environment; (2) the estimation of genotypic sensitivities as the factorial regression slope of KN and TKW to environmental covariates and the detection of QTL for these genotypic sensitivities; (3) study of the co-locations of QTL for KN and TKW and of the QTL for sensitivities; in the event of a co-location partitioning the QEI, appropriate covariates were employed; (4) a description of the environments where QTL were detected for KN and TKW using the environmental covariates. A total of 131 QTL were found to be associated with KN, TKW and their sensitivity to environmental covariates across the 12 environments. Four of these QTL, for both KN and TKW, were located on linkage groups 1B, 2D1, 4B and 5A1, and displayed pleiotropic effects. Factorial regression explained from 15.1 to 83.2% of the QEI for KN and involved three major environmental covariates: cumulative radiation-days ±3 days at meiosis, cumulative degree-days >25°C ±3 days at meiosis and nitrogen stress at flowering. For TKW, 13.5-81.8% of the effect of the QEI was partitioned and involved three major environmental covariates: water deficit from flowering to the milk stage, cumulative degree-days >0°C from the milk stage to maturity and soil water deficit at maturity. A comparative analysis was then performed on the QTL detected during this and previous studies published on QEI and some interacting QTL may be common to different genetic backgrounds. Focusing on these QTL common to different genetic backgrounds would give some guidance to understand genotype × environment interaction.

Breeding progress and preparedness for mass-scale deployment of perennial lignocellulosic biomass crops switchgrass, miscanthus, willow and poplar.

Genetic improvement through breeding is one of the key approaches to increasing biomass supply. This paper documents the breeding progress to date for four perennial biomass crops (PBCs) that have high output-input energy ratios: namely Panicum virgatum (switchgrass), species of the genera Miscanthus (miscanthus), Salix (willow) and Populus (poplar). For each crop, we report on the size of germplasm collections, the efforts to date to phenotype and genotype, the diversity available for breeding and on the scale of breeding work as indicated by number of attempted crosses. We also report on the development of faster and more precise breeding using molecular breeding techniques. Poplar is the model tree for genetic studies and is furthest ahead in terms of biological knowledge and genetic resources. Linkage maps, transgenesis and genome editing methods are now being used in commercially focused poplar breeding. These are in development in switchgrass, miscanthus and willow generating large genetic and phenotypic data sets requiring concomitant efforts in informatics to create summaries that can be accessed and used by practical breeders. Cultivars of switchgrass and miscanthus can be seed-based synthetic populations, semihybrids or clones. Willow and poplar cultivars are commercially deployed as clones. At local and regional level, the most advanced cultivars in each crop are at technology readiness levels which could be scaled to planting rates of thousands of hectares per year in about 5 years with existing commercial developers. Investment in further development of better cultivars is subject to current market failure and the long breeding cycles. We conclude that sustained public investment in breeding plays a key role in delivering future mass-scale deployment of PBCs.

Saccharification Performances of Miscanthus at the Pilot and Miniaturized Assay Scales: Genotype and Year Variabilities According to the Biomass Composition.

HIGHLIGHTS Biomass production and cell wall composition are differentially impacted by harvesting year and genotypes, influencing then cellulose conversion in miniaturized assay.Using a high-throughput miniaturized and semi-automated method for performing the pretreatment and saccharification steps at laboratory scale allows for the assessment of these factors on the biomass potential for producing bioethanol before moving to the industrial scale. The large genetic diversity of the perennial grass miscanthus makes it suitable for producing cellulosic ethanol in biorefineries. The saccharification potential and year variability of five genotypes belonging to Miscanthus × giganteus and Miscanthus sinensis were explored using a miniaturized and semi-automated method, allowing the application of a hot water treatment followed by an enzymatic hydrolysis. The studied genotypes highlighted distinct cellulose conversion yields due to their distinct cell wall compositions. An inter-year comparison revealed significant variations in the biomass productivity and cell wall compositions. Compared to the recalcitrant genotypes, more digestible genotypes contained higher amounts of hemicellulosic carbohydrates and lower amounts of cellulose and lignin. In contrast to hemicellulosic carbohydrates, the relationships analysis between the biomass traits and cellulose conversion clearly showed the same negative effect of cellulose and lignin on cellulose digestion. The miniaturized and semi-automated method we developed was usable at the laboratory scale and was reliable for mimicking the saccharification at the pilot scale using a steam explosion pretreatment and enzymatic hydrolysis. Therefore, this miniaturized method will allow the reliable screening of many genotypes for saccharification potential. These findings provide valuable information and tools for breeders to create genotypes combining high yield, suitable biomass composition, and high saccharification yields.

Influence of the radial stem composition on the thermal behaviour of miscanthus and sorghum genotypes.

The hypothesis made is that thermal resistance of sorghum and miscanthus stem pieces taken at well-defined positions of the stem is simply related to their biochemical composition. For miscanthus, two different genotypes and two internode levels were selected. For each region, the stem was divided into three radial layers. For sorghum, two different genotypes were selected and the stem was divided into the same three radial layers. The results show that the thermal analysis is only sensitive to very large variations of compositions. But aside of such large composition differences, it is impossible to correlate thermal effects to biochemical composition even on very small size, well-identified pieces of plant materials. The interplay between sugar-based components, lignin and minerals is totally blurring the thermal response. Extreme care must be exercised when willing to explain why a given plant material has a thermal behaviour different of another plant material.

Cell wall compositional modifications of Miscanthus ecotypes in response to cold acclimation.

Miscanthus, a potential energy crop grass, can be damaged by late frost when shoots emerge too early in the spring and during the first winter after planting. The effects of cold acclimation on cell wall composition were investigated in a frost-sensitive clone of Miscanthus x giganteus compared to frost-tolerant clone, Miscanthus sinensis August Feder, and an intermediate frost-tolerant clone, M. sinensis Goliath. Cellulose and lignin contents were higher in M. x giganteus than in the M. sinensis genotypes. In ambient temperature controls, each clone displayed different glucuronoarabinoxylan (GAX) contents and degree of arabinose substitution on the xylan backbone. During cold acclimation, an increase in (1→3),(1→4)-ß-D-glucan content was observed in all genotypes. Uronic acid level increased in the frost sensitive genotype but decreased in the frost tolerant genotypes in response to cold. In all clones, major changes in cell wall composition were observed with modifications in phenylalanine ammonia-lyase (PAL) and cinnamyl alcohol dehydrogenase (CAD) activities in both non- and cold-acclimated experiments. A large increase in CAD activity under cold stress was displayed in each clone, but it was largest in the frost-tolerant clone, M. sinensis August Feder. The marked increase in PAL activity observed in the frost-tolerant clones under cold acclimation, suggests a reorientation of the products towards the phenylpropanoid pathway or aromatic synthesis. How changes in cell wall physical properties can impact frost tolerance is discussed.

Using genotype x nitrogen interaction variables to evaluate the QTL involved in wheat tolerance to nitrogen constraints.

Lower market prices and environmental concerns now orientate wheat (Triticum aestivum L.) breeding programs towards low input agricultural practices, and more particularly low nitrogen (N) input management. Such programs require knowledge of the genetic determination of plant reaction to N deficiency. Our aim was to characterize the genetic basis of N use efficiency and genotype x N interactions. The detection of QTL for grain yield, grain protein yield and their components was performed on a mapping population of 222 doubled haploid lines (DH), obtained from the cross between an N stress tolerant variety and an N stress sensitive variety. Experiments on the population were carried out in seven different environments, and in each case under high (N(+)) and low (N(-)) N supplies. In total, 233 QTL were detected for traits measured in each combination of environment and N supply, for "global" interaction variables (N(+)-N(-) and N(-)/N(+)), for sensitivity to N stress and for performance under N-limited conditions which were assessed using factorial regression parameters. The 233 QTL were detected on the whole genome and clustered into 82 genome regions. The dwarfing gene (Rht-B1), the photoperiod sensitivity gene (Ppd-D1) and the awns inhibitor gene (B1) coincided with regions that contained the highest numbers of QTL. Non-interactive QTL were detected on linkage groups 3D, 4B, 5A1 and 7B2. Interactive QTL were revealed by interaction or factorial regression variables (2D2, 3D, 5A1, 5D, 6A, 6B, 7B2) or by both variables (1B, 2A1, 2A2, 2D1, 4B, 5A2, 5B). The usefulness of QTL meta-analysis and factorial regression to study QTL x N interactions and the impact of Rht-B1, Ppd-D1 and B1, are discussed.

Estimation of genetic parameters of a DH wheat population grown at different N stress levels characterized by probe genotypes.

Low market prices and environmental concerns in Europe favor lower input wheat production systems. To efficiently breed for new varieties adapted to low input management while maintaining high yield levels, our objective was to characterize the heritability and its components for yield and nitrogen traits under different nitrogen levels. Two hundred and twenty-two doubled-haploid (DH) lines from the cross between Arche (tolerant) and Récital (sensitive) were tested in France at four locations in 2000, and three in 2001, under high (N+) and low (N-) nitrogen supplies. The response of yield to the environment of four probe genotypes, the parents and two controls, were tested and used as descriptors of these environments. Grain yield (GY), its components, and grain and straw nitrogen, called nitrogen traits, were studied. A factorial regression was performed to assess the sensitivity (slope) of the DH lines to nitrogen stress and their performance to low nitrogen supply. An index based on the nitrogen nutrition index at flowering of the probe genotype Récital was the best descriptor of the environment stress. Heritabilities of yield and nitrogen traits for both nitrogen supplies were always above 0.6. When nitrogen stress increased, heritabilities decreased and genotype x nitrogen interaction variances increased. The decrease in heritability was mainly explained by a decrease in genetic variance. Genetic variation for sensitivity to nitrogen stress and performance under low nitrogen supply were shown in the population. GY decreased from 278 to 760 g/m2 per unit of nitrogen stress index increase and GY under moderate nitrogen stress varied from 340 to 613 g/m2. Those contrasted reactions revealed specific lines to include in breeding programs for improving GY under low nitrogen supply.