RESUMO
Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by "anomalies" or "non-idealities" such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide- and silicate-water interfaces. This critical review discusses how science progresses from understanding ideal solid-water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. We anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration.
RESUMO
Hydraulic fracturing of unconventional oil/gas shales has changed the energy landscape of the U.S. Recovery of hydrocarbons from tight, hydraulically fractured shales is a highly inefficient process, with estimated recoveries of <25% for natural gas and <5% for oil. This review focuses on the complex chemical interactions of additives in hydraulic fracturing fluid (HFF) with minerals and organic matter in oil/gas shales. These interactions are intended to increase hydrocarbon recovery by increasing porosities and permeabilities of tight shales. However, fluid-shale interactions result in the dissolution of shale minerals and the release and transport of chemical components. They also result in mineral precipitation in the shale matrix, which can reduce permeability, porosity, and hydrocarbon recovery. Competition between mineral dissolution and mineral precipitation processes influences the amounts of oil and gas recovered. We review the temporal/spatial origins and distribution of unconventional oil/gas shales from mudstones and shales, followed by discussion of their global and U.S. distributions and compositional differences from different U.S. sedimentary basins. We discuss the major types of chemical additives in HFF with their intended purposes, including drilling muds. Fracture distribution, porosity, permeability, and the identity and molecular-level speciation of minerals and organic matter in oil/gas shales throughout the hydraulic fracturing process are discussed. Also discussed are analysis methods used in characterizing oil/gas shales before and after hydraulic fracturing, including permeametry and porosimetry measurements, X-ray diffraction/Rietveld refinement, X-ray computed tomography, scanning/transmission electron microscopy, and laboratory- and synchrotron-based imaging/spectroscopic methods. Reactive transport and spatial scaling are discussed in some detail in order to relate fundamental molecular-scale processes to fluid transport. Our review concludes with a discussion of potential environmental impacts of hydraulic fracturing and important knowledge gaps that must be bridged to achieve improved mechanistic understanding of fluid transport in oil/gas shales.
Assuntos
Fraturamento Hidráulico , Minerais/química , Gás Natural , Campos de Petróleo e Gás , Águas Residuárias/químicaRESUMO
Uranium and other radionuclides are prominent in many unconventional oil/gas shales and is a potential contaminant in flowback/produced waters due to the large volumes/types of chemicals injected into the subsurface during stimulation. To understand the stability of U before and after stimulation, a geochemical study of U speciation was carried out on three shales (Marcellus, Green River, and Barnett). Two types of samples for each shale were subjected to sequential chemical extractions: unreacted and shale-reacted with a synthetic hydraulic fracture fluid. A significant proportion of the total U (20-57%) was released from these three shales after reaction with fracture fluid, indicating that U is readily leachable. The total U released exceeds labile water-soluble and exchangeable fractions in unreacted samples, indicating that fluids leach more recalcitrant phases in the shale. Radiographic analysis of unreacted Marcellus shale thin sections shows U associated with detrital quartz and the clay matrix in the shale. Detrital zircon and TiO2 identified by an electron microprobe could account for the hot spots. This study shows that significant proportions of U in three shales are mobile upon stimulation. In addition, the extent of mobilization of U depends on the U species in these rocks.
Assuntos
Fraturamento Hidráulico , Urânio , Minerais , Gás Natural , Campos de Petróleo e Gás , Urânio/análise , Águas ResiduáriasRESUMO
Groundwater contamination by As from natural and anthropogenic sources is a worldwide concern. Redox heterogeneities over space and time are common and can influence the molecular-level speciation of As, and thus, As release/retention but are largely unexplored. Here, we present results from a dual-domain column experiment, with natural organic-rich, fine-grained, and sulfidic sediments embedded as lenses (referred to as "reducing lenses") within natural aquifer sand. We show that redox interfaces in sulfur-rich, alkaline aquifers may release concerning levels of As, even when sediment As concentration is low (<2 mg/kg), due to the formation of mobile thioarsenates at aqueous sulfide/Fe molar ratios <1. In our experiments, this behavior occurred in the aquifer sand between reducing lenses and was attributed to the spreading of sulfidic conditions and subsequent Fe reductive dissolution. In contrast, inside reducing lenses (and some locations in the aquifer) the aqueous sulfide/Fe molar ratios exceeded 1 and aqueous sulfide/As molar ratios exceeded 100, which partitioned As(III)-S to the solid phase (associated with organics or as realgar (As4S4)). These results highlight the importance of thioarsenates in natural sediments and indicate that redox interfaces and sediment heterogeneities could locally degrade groundwater quality, even in aquifers with unconcerning solid-phase As concentrations.
Assuntos
Arsênio , Água Subterrânea , Poluentes Químicos da Água , Sedimentos Geológicos , OxirreduçãoRESUMO
Hexavalent chromium is a water-soluble pollutant, the mobility of which can be controlled by reduction of Cr(VI) to less soluble, environmentally benign Cr(III). Iron(II/III)-bearing clay minerals are widespread potential reductants of Cr(VI), but the kinetics and pathways of Cr(VI) reduction by such clay minerals are poorly understood. We reacted aqueous Cr(VI) with two abiotically reduced clay minerals: an Fe-poor montmorillonite and an Fe-rich nontronite. The effects of ionic strength, pH, total Fe content, and the fraction of reduced structural Fe(II) [Fe(II)/Fe(total)] were examined. The last variable had the largest effect on Cr(VI) reduction kinetics: for both clay minerals, the rate constant of Cr(VI) reduction varies by more than 3 orders of magnitude with Fe(II)/Fe(total) and is described by a linear free energy relationship. Under all conditions examined, Cr and Fe K-edge X-ray absorption near-edge structure spectra show that the main Cr-bearing product is a Cr(III)-hydroxide and that Fe remains in the clay structure after reacting with Cr(VI). This study helps to quantify our understanding of the kinetics of Cr(VI) reduction by Fe(II/III)-bearing clay minerals and may improve predictions of Cr(VI) behavior in subsurface environments.
Assuntos
Silicatos de Alumínio , Cromo/química , Ferro , Poluentes Químicos da Água/química , Argila , Cinética , Minerais , OxirreduçãoRESUMO
Polarization-dependent grazing incidence X-ray absorption spectroscopy (XAS) measurements were completed on oriented single crystals of magnesite [MgCO3] and brucite [Mg(OH)2] reacted with aqueous uranyl chloride above and below the solubility boundaries of schoepite (500, 50, and 5 ppm) at pH 8.3 and at ambient (PCO2 = 10(-3.5)) or reduced partial pressures of carbon dioxide (PCO2 = 10(-4.5)). X-ray absorption near edge structure (XANES) spectra show a striking polarization dependence (χ = 0° and 90° relative to the polarization plane of the incident beam) and consistently demonstrated that the uranyl molecule was preferentially oriented with its OaxialâU(VI)âOaxial linkage at high angles (60-80°) to both magnesite (101Ì 4) and brucite (0001). Extended X-ray absorption fine structure (EXAFS) analysis shows that the "effective" number of U(VI) axial oxygens is the most strongly affected fitting parameter as a function of polarization. Furthermore, axial tilt in the surface thin films (thickness â¼ 21 Å) is correlated with surface roughness [σ]. Our results show that hydrated uranyl(-carbonate) complexes polymerize on all of our experimental surfaces and that this process is controlled by surface hydroxylation. These results provide new insights into the bonding configuration expected for uranyl complexes on the environmentally significant carbonate and hydroxide mineral surfaces.
Assuntos
Cloretos/química , Magnésio/química , Urânio/química , Cristalização , Concentração de Íons de Hidrogênio , Hidróxido de Magnésio/química , Nanoestruturas/química , Solubilidade , Espectroscopia por Absorção de Raios X , Difração de Raios XRESUMO
The goal of this study was to investigate the Hg stable isotope signatures of sediments in San Carlos Creek downstream of the former Hg mine New Idria, CA, USA and to relate the results to previously studied Hg isotope signatures of unroasted ore waste and calcine materials in the mining area. New Idria unroasted ore waste was reported to have a narrow δ(202)Hg range (−0.09 to 0.16), while roasted calcine materials exhibited a very large variability in δ(202)Hg (−5.96 to 14.5). In this study, creek sediment samples were collected in the stream bed from two depths (010 and 1020 cm) at 10 locations between the mine adit and 28 km downstream. The sediment samples were size-fractionated into sand, silt, and (if possible) clay fractions as well as hand-picked calcine pebbles. The sediment samples contained highly elevated Hg concentrations (8.2 to 647 µg g(1)) and displayed relatively narrow mass-dependent fractionation (MDF, δ(202)Hg; ± 0.08, 2SD) ranges (−0.58 to 0.24) and little to no mass-independent fractionation (MIF, Δ(199)Hg; ± 0.04, 2SD) (0.00 to 0.10), similar to what was observed previously for the unroasted ore waste. However, due to the highly variable and overlapping δ(202)Hg signatures of the calcines, they could not be ruled out as source of Hg to the creek sediments. Overall, our results suggest that analyzing creek sediments downstream of former Hg mines can provide a more reliable Hg isotope source signature for tracing studies at larger spatial scales, than analyzing the isotopically highly heterogeneous tailing piles typically found at former mining sites. Creek sediments carry an integrated isotope signature of Hg transported away from the mine with runoff into the creek, eventually affecting ecosystems downstream.
Assuntos
Água Doce/química , Sedimentos Geológicos/química , Mercúrio/análise , Mineração , Poluentes Químicos da Água/análise , California , Fracionamento Químico , Ecossistema , Monitoramento Ambiental/métodos , Isótopos de MercúrioRESUMO
Bioreduction of As(V) and As-bearing iron oxides is considered to be one of the key processes leading to arsenic pollution in groundwaters in South and Southeast Asia. Recent laboratory studies with simple aqueous media showed that secondary Fe(II)-bearing phases (e.g., magnetite and green rust), which commonly precipitate during bioreduction of iron oxides, captured arsenic species. The aim of the present study was to follow arsenic speciation during the abiotic Fe(II)-induced transformation of As(III)- and As(V)-doped lepidocrocite to magnetite, and to evaluate the influence of arsenic on the transformation kinetics and pathway. We found green rust formation is an intermediate phase in the transformation. Both As(III) and As(V) slowed the transformation, with the effect being greater for As(III) than for As(V). Prior to the formation of magnetite, As(III) adsorbed on both lepidocrocite and green rust, whereas As(V) associated exclusively with green rust, When magnetite precipitated, As(III) formed surface complexes on magnetite nanoparticles and As(V) is thought to have been incorporated into the magnetite structure. These processes dramatically lowered the availability of As in the anoxic systems studied. These results provide insights into the behavior of arsenic during magnetite precipitation in reducing environments. We also found that As(V) removal from solution was higher than As(III) removal following magnetite formation, which suggests that conversion of As(III) to As(V) is preferred when using As-magnetite precipitation to treat As-contaminated groundwaters.
Assuntos
Arsênio/química , Compostos Férricos/química , Óxido Ferroso-Férrico/química , Poluentes Químicos da Água/química , Adsorção , Arsênio/classificação , Água Subterrânea/química , Cinética , Nanopartículas de MagnetitaRESUMO
Integration of complementary techniques can be powerful for the investigation of metal speciation and characterization in complex and heterogeneous environmental samples, such as sewage sludge products. In the present study, we combined analytical transmission electron microscopy (TEM)-based techniques with X-ray absorption spectroscopy (XAS) to identify and characterize nanocrystalline zinc sulfide (ZnS), considered to be the dominant Zn-containing phase in the final stage of sewage sludge material of a full-scale municipal wastewater treatment plant. We also developed sample preparation procedures to preserve the organic and sulfur-rich nature of sewage sludge matrices for microscopic and spectroscopic analyses. Analytical TEM results indicate individual ZnS nanocrystals to be in the size range of 2.5 to 7.5 nm in diameter, forming aggregates of a few hundred nanometers. Observed lattice spacings match sphalerite. The ratio of S to Zn for the ZnS nanocrystals is estimated to be 1.4, suggesting that S is present in excess. The XAS results on the Zn speciation in the bulk sludge material also support the TEM observation that approximately 80% of the total Zn has the local structure of a 3-nm ZnS nanoparticle reference material. Because sewage sludge is frequently used as a soil amendment on agricultural lands, future studies that investigate the oxidative dissolution rate of ZnS nanoparticles as a function of size and aggregation state and the change of Zn speciation during post sludge-processing and soil residency are warranted to help determine the bioavailability of sludge-born Zn in the soil environment.
RESUMO
Although minor in abundance in Earth's crust (U, 2-4 ppm; Th, 10-15 ppm) and in seawater (U, 0.003 ppm; Th, 0.0007 ppm), light actinides (Th, Pa, U, Np, Pu, Am, and Cm) are important environmental contaminants associated with anthropogenic activities such as the mining and milling of uranium ores, generation of nuclear energy, and storage of legacy waste resulting from the manufacturing and testing of nuclear weapons. In this review, we discuss the abundance, production, and environmental sources of naturally occurring and some man-made light actinides. As is the case with other environmental contaminants, the solubility, transport properties, bioavailability, and toxicity of actinides are dependent on their speciation (composition, oxidation state, molecular-level structure, and nature of the phase in which the contaminant element or molecule occurs). We review the aqueous speciation of U, Np, and Pu as a function of pH and Eh, their interaction with common inorganic and organic ligands in natural waters, and some of the common U-containing minerals. We also discuss the interaction of U, Np, Pu, and Am solution complexes with common Earth materials, including minerals, colloids, gels, natural organic matter (NOM), and microbial organisms, based on simplified model system studies. These surface interactions can inhibit (e.g., sorption to mineral surfaces, formation of insoluble biominerals) or enhance (e.g., colloid-facilitated transport) the dispersal of light actinides in the biosphere and in some cases (e.g., interaction with dissimilatory metal-reducing bacteria, NOM, or Mn- and Fe-containing minerals) can modify the oxidation states and, consequently, the behavior of redox-sensitive light actinides (U, Np, and Pu). Finally, we review the speciation of U and Pu, their chemical transformations, and cleanup histories at several U.S. Department of Energy field sites that have been used to mill U ores, produce fissile materials for reactors and weapons, and store high-level nuclear waste from both civilian and defense operations, including Hanford, WA; Rifle, CO; Oak Ridge, TN; Fernald, OH; Fry Canyon, UT; and Rocky Flats, CO.
RESUMO
Environmental transformations of nanoparticles (NPs) affect their properties and toxicity potential. Sulfidation is an important transformation process affecting the fate of NPs containing metal cations with an affinity for sulfide. Here, the extent and mechanism of sulfidation of ZnO NPs were investigated, and the properties of resulting products were carefully characterized. Synchrotron X-ray absorption spectroscopy and X-ray diffraction analysis reveal that transformation of ZnO to ZnS occurs readily at ambient temperature in the presence of inorganic sulfide. The extent of sulfidation depends on sulfide concentration, and close to 100% conversion can be obtained in 5 days given sufficient addition of sulfide. X-ray diffraction and transmission electron microscopy showed formation of primarily ZnS NPs smaller than 5 nm, indicating that sulfidation of ZnO NPs occurs by a dissolution and reprecipitation mechanism. The solubility of partially sulfidized ZnO NPs is controlled by the remaining ZnO core and not quenched by a ZnS shell formed as was observed for partially sulfidized Ag NPs. Sulfidation also led to NP aggregation and a decrease of surface charge. These changes suggest that sulfidation of ZnO NPs alters the behavior, fate, and toxicity of ZnO NPs in the environment. The reactivity and fate of the resulting <5 nm ZnS particles remains to be determined.
Assuntos
Nanopartículas/química , Sulfetos/química , Óxido de Zinco/química , Nanopartículas/ultraestrutura , SolubilidadeRESUMO
Natural organic matter (NOM) often forms coatings on minerals. Such coatings are expected to affect metal-ion sorption due to abundant sorption sites in NOM and potential modifications to mineral surfaces, but such effects are poorly understood in complex multicomponent systems. Using poly(acrylic acid) (PAA), a simplified analog of NOM containing only carboxylic groups, Pb(II) and Zn(II) partitioning between PAA coatings and α-Al2O3 (1-102) and (0001) surfaces was investigated using long-period X-ray standing wave-florescence yield spectroscopy. In the single-metal-ion systems, PAA was the dominant sink for Pb(II) and Zn(II) for α-Al2O3(1-102) (63% and 69%, respectively, at 0.5 µM metal ions and pH 6.0). In equi-molar mixed-Pb(II)-Zn(II) systems, partitioning of both ions onto α-Al2O3(1-102) decreased compared with the single-metal-ion systems; however, Zn(II) decreased Pb(II) sorption to a greater extent than vice versa, suggesting that Zn(II) outcompeted Pb(II) for α-Al2O3(1-102) sorption sites. In contrast, >99% of both metal ions sorbed to PAA when equi-molar Pb(II) and Zn(II) were added simultaneously to PAA/α-Al2O3(0001). PAA outcompeted both α-Al2O3 surfaces for metal sorption but did not alter their intrinsic order of reactivity. This study suggests that single-metal-ion sorption results cannot be used to predict multimetal-ion sorption at NOM/metal-oxide interfaces when NOM is dominated by carboxylic groups.
Assuntos
Resinas Acrílicas/química , Óxido de Alumínio/química , Chumbo/química , Zinco/química , Adsorção , Hidróxido de Alumínio , Cristalização , Concentração de Íons de Hidrogênio , Íons/química , Metais/química , Minerais/química , Compostos Orgânicos , Espectrometria de Fluorescência/métodos , Raios XRESUMO
Pristine silver nanoparticles (AgNPs) are not chemically stable in the environment and react strongly with inorganic ligands such as sulfide and chloride once the silver is oxidized. Understanding the environmental transformations of AgNPs in the presence of specific inorganic ligands is crucial to determining their fate and toxicity in the environment. Chloride (Cl(-)) is a ubiquitous ligand with a strong affinity for oxidized silver and is often present in natural waters and in bacterial growth media. Though chloride can strongly affect toxicity results for AgNPs, their interaction is rarely considered and is challenging to study because of the numerous soluble and solid Ag-Cl species that can form depending on the Cl/Ag ratio. Consequently, little is known about the stability and dissolution kinetics of AgNPs in the presence of chloride ions. Our study focuses on the dissolution behavior of AgNPs in chloride-containing systems and also investigates the effect of chloride on the growth inhibition of E.coli (ATCC strain 33876) caused by Ag toxicity. Our results suggest that the kinetics of dissolution are strongly dependent on the Cl/Ag ratio and can be interpreted using the thermodynamically expected speciation of Ag in the presence of chloride. We also show that the toxicity of AgNPs to E.coli at various Cl(-) concentrations is governed by the amount of dissolved AgCl(x)((x-1)-) species suggesting an ion effect rather than a nanoparticle effect.
Assuntos
Cloretos/química , Escherichia coli/efeitos dos fármacos , Nanopartículas Metálicas/química , Nanopartículas Metálicas/toxicidade , Prata/toxicidade , Poluentes Químicos da Água/toxicidade , Relação Dose-Resposta a Droga , Escherichia coli/crescimento & desenvolvimento , Prata/química , Poluentes Químicos da Água/químicaRESUMO
Mass-dependent fractionation (MDF) and mass-independent fractionation (MIF) of Hg isotopes provides a new tool for tracing Hg in contaminated environments such as mining sites, which represent major point sources of Hg pollution into surrounding ecosystems. Here, we present Hg isotope ratios of unroasted ore waste, calcine (roasted ore), and poplar leaves collected at a closed Hg mine (New Idria, CA, U.S.A.). Unroasted ore waste was isotopically uniform with δ(202)Hg values from -0.09 to 0.16 (± 0.10, 2 SD), close to the estimated initial composition of the HgS ore (-0.26). In contrast, calcine samples exhibited variable δ(202)Hg values ranging from -1.91 to +2.10. Small MIF signatures in the calcine were consistent with nuclear volume fractionation of Hg isotopes during or after the roasting process. The poplar leaves exhibited negative MDF (-3.18 to -1.22) and small positive MIF values (Δ(199)Hg of 0.02 to 0.21). Sequential extractions combined with Hg isotope analysis revealed higher δ(202)Hg values for the more soluble Hg pools in calcines compared with residual HgS phases. Our data provide novel insights into possible in situ transformations of Hg phases and suggest that isotopically heavy secondary Hg phases were formed in the calcine, which will influence the isotope composition of Hg leached from the site.
Assuntos
Isótopos de Mercúrio/análise , Mercúrio/análise , Mineração , Estados UnidosRESUMO
Nanomaterials are highly dynamic in biological and environmental media. A critical need for advancing environmental health and safety research for nanomaterials is to identify physical and chemical transformations that affect the nanomaterial properties and their toxicity. Silver nanoparticles, one of the most toxic and well-studied nanomaterials, readily react with sulfide to form Ag(0)/Ag2S core-shell particles. Here, we show that sulfidation decreased silver nanoparticle toxicity to four diverse types of aquatic and terrestrial eukaryotic organisms (Danio rerio (zebrafish), Fundulus heteroclitus (killifish), Caenorhabditis elegans (nematode worm), and the aquatic plant Lemna minuta (least duckweed)). Toxicity reduction, which was dramatic in killifish and duckweed even for low extents of sulfidation (about 2 mol % S), is primarily associated with a decrease in Ag(+) concentration after sulfidation due to the lower solubility of Ag2S relative to elemental Ag (Ag(0)). These results suggest that even partial sulfidation of AgNP will decrease the toxicity of AgNPs relative to their pristine counterparts. We also show that, for a given organism, the presence of chloride in the exposure media strongly affects the toxicity results by affecting Ag speciation. These results highlight the need to consider environmental transformations of NPs in assessing their toxicity to accurately portray their potential environmental risks.
Assuntos
Antídotos/química , Embrião não Mamífero/efeitos dos fármacos , Nanopartículas Metálicas/química , Nanopartículas Metálicas/toxicidade , Prata/química , Sulfetos/química , Animais , Araceae/efeitos dos fármacos , Caenorhabditis elegans/efeitos dos fármacos , Cloretos/química , Fundulidae/metabolismo , Dose Letal Mediana , Nanopartículas Metálicas/ultraestrutura , Microscopia Eletrônica de Varredura , Povidona , Análise de Regressão , Solubilidade , Peixe-Zebra/metabolismoRESUMO
The natural nanomineral ferrihydrite is an important component of many environmental and soil systems and has been implicated as the inorganic core of ferritin in biological systems. Knowledge of its basic structure, composition, and extent of structural disorder is essential for understanding its reactivity, stability, and magnetic behavior, as well as changes in these properties during aging. Here we investigate compositional, structural, and magnetic changes that occur upon aging of "2-line" ferrihydrite in the presence of adsorbed citrate at elevated temperature. Whereas aging under these conditions ultimately results in the formation of hematite, analysis of the atomic pair distribution function and complementary physicochemical and magnetic data indicate formation of an intermediate ferrihydrite phase of larger particle size with few defects, more structural relaxation and electron spin ordering, and pronounced ferrimagnetism relative to its disordered ferrihydrite precursor. Our results represent an important conceptual advance in understanding the nature of structural disorder in ferrihydrite and its relation to the magnetic structure and also serve to validate a controversial, recently proposed structural model for this phase. In addition, the pathway we identify for forming ferrimagnetic ferrihydrite potentially explains the magnetic enhancement that typically precedes formation of hematite in aerobic soil and weathering environments. Such magnetic enhancement has been attributed to the formation of poorly understood, nano-sized ferrimagnets from a ferrihydrite precursor. Whereas elevated temperatures drive the transformation on timescales feasible for laboratory studies, our results also suggest that ferrimagnetic ferrihydrite could form naturally at ambient temperature given sufficient time.
Assuntos
Evolução Molecular Direcionada , Compostos Férricos/química , Magnetismo , Modelos Moleculares , Microscopia Eletrônica de Transmissão , Análise Multivariada , Tamanho da Partícula , Difração de Raios XRESUMO
Silver nanoparticles (Ag-NPs) readily transform in the environment, which modifies their properties and alters their transport, fate, and toxicity. It is essential to consider such transformations when assessing the potential environmental impact of Ag-NPs. This review discusses the major transformation processes of Ag-NPs in various aqueous environments, particularly transformations of the metallic Ag cores caused by reactions with (in)organic ligands, and the effects of such transformations on physical and chemical stability and toxicity. Thermodynamic arguments are used to predict what forms of oxidized silver will predominate in various environmental scenarios. Silver binds strongly to sulfur (both organic and inorganic) in natural systems (fresh and sea waters) as well as in wastewater treatment plants, where most Ag-NPs are expected to be concentrated and then released. Sulfidation of Ag-NPs results in a significant decrease in their toxicity due to the lower solubility of silver sulfide, potentially limiting their short-term environmental impact. This review also discusses some of the major unanswered questions about Ag-NPs, which, when answered, will improve predictions about their potential environmental impacts. Research needed to address these questions includes fundamental molecular-level studies of Ag-NPs and their transformation products, particularly Ag(2)S-NPs, in simplified model systems containing common (in)organic ligands, as well as under more realistic environmental conditions using microcosm/mesocosm-type experiments. Toxicology studies of Ag-NP transformation products, including different states of aggregation and sulfidation, are also required. In addition, there is the need to characterize the surface structures, compositions, and morphologies of Ag-NPs and Ag(2)S-NPs to the extent possible because they control properties such as solubility and reactivity.
Assuntos
Poluentes Ambientais/química , Poluentes Ambientais/toxicidade , Nanopartículas/química , Nanopartículas/toxicidade , Prata/química , Prata/toxicidade , Animais , Meio Ambiente , Humanos , Nanopartículas/ultraestrutura , Sulfetos/química , Sulfetos/toxicidade , TermodinâmicaRESUMO
The solubility of Ag NPs can affect their toxicity and persistence in the environment. We measured the solubility of organic-coated silver nanoparticles (Ag NPs) having particle diameters ranging from 5 to 80 nm that were synthesized using various methods, and with different organic polymer coatings including poly(vinylpyrrolidone) and gum arabic. The size and morphology of Ag NPs were characterized by transmission electron microscopy (TEM). X-ray absorption fine structure (XAFS) spectroscopy and synchrotron-based total X-ray scattering and pair distribution function (PDF) analysis were used to determine the local structure around Ag and evaluate changes in crystal lattice parameters and structure as a function of NP size. Ag NP solubility dispersed in 1 mM NaHCO(3) at pH 8 was found to be well correlated with particle size based on the distribution of measured TEM sizes as predicted by the modified Kelvin equation. Solubility of Ag NPs was not affected by the synthesis method and coating as much as by their size. Based on the modified Kelvin equation, the surface tension of Ag NPs was found to be â¼1 J/m(2), which is expected for bulk fcc (face centered cubic) silver. Analysis of XAFS, X-ray scattering, and PDFs confirm that the lattice parameter, a, of the fcc crystal structure of Ag NPs did not change with particle size for Ag NPs as small as 6 nm, indicating the absence of lattice strain. These results are consistent with the finding that Ag NP solubility can be estimated based on TEM-derived particle size using the modified Kelvin equation for particles in the size range of 5-40 nm in diameter.
Assuntos
Nanopartículas Metálicas/química , Compostos Orgânicos/química , Prata/química , Goma Arábica , Microscopia Eletrônica de Transmissão , Tamanho da Partícula , Polímeros , Difração de Raios XRESUMO
Zinc is one of the most widespread trace metals (TMs) in Earth surface environments and is the most concentrated TM in the downstream section of the Seine River (France) due to significant anthropogenic input from the Paris conurbation. In order to better identify the sources and cycling processes of Zn in this River basin, we investigated seasonal and spatial variations of Zn speciation in suspended particulate matter (SPM) in the oxic water column of the Seine River from upstream to downstream of Paris using synchrotron-based extend X-ray absorption fine structure (EXAFS) spectroscopy at the Zn K-edge. First-neighbor contributions to the EXAFS were analyzed in SPM samples, dried and stored under a dry nitrogen atmosphere or under an ambient oxygenated atmosphere. We found a sulfur first coordination environment around Zn (in the form of amorphous zinc sulfide) in the raw SPM samples stored under dry nitrogen vs an oxygen first coordination environment around Zn in the samples stored in an oxygenated atmosphere. These findings are supported by scanning electron microscopy and energy dispersive X-ray spectrometry observations. Linear combination fitting of the EXAFS data for SPM samples, using a large set of EXAFS spectra of Zn model compounds, indicates dramatic changes in the Zn speciation from upstream to downstream of Paris, with amorphous ZnS particles becoming dominant dowstream. In contrast, Zn species associated with calcite (either adsorbed or incorporated in the structure) are dominant upstream. Other Zn species representing about half of the Zn pool in the SPM consist of Zn-sorbed on iron oxyhydroxides (ferrihydrite and goethite) and, to a lesser extent, Zn-Al layered double hydroxides, Zn incorporated in dioctahedral layers of clay minerals and Zn sorbed to amorphous silica. Our results highlight the importance of preserving the oxidation state in TM speciation studies when sampling suspended matter, even in an oxic water column.
Assuntos
Material Particulado/química , Rios/química , Sulfetos/análise , Sulfetos/química , Espectroscopia por Absorção de Raios X/métodos , Compostos de Zinco/análise , Compostos de Zinco/química , Zinco/análise , Elétrons , Análise de Fourier , Sedimentos Geológicos/química , Modelos Lineares , Microscopia Eletrônica de Varredura , Oxigênio , Paris , Suspensões , Água/química , Poluentes Químicos da ÁguaRESUMO
Knowledge of how arsenic (As) partitions among various phases in Fe-rich sulfidic environments is critical for understanding the fate and mobility of As in such environments. We studied the reaction of arsenite and arsenate sorbed on ferrihydrite nanoparticle surfaces with dissolved sulfide at varying S/Fe ratios (0.1-2.0) to understand the fate and transformation mechanism of As during sulfidation of ferrihydrite. By using aqueous As speciation analysis by IC-ICP-MS and solid-phase As speciation analysis by synchrotron-based X-ray absorption spectroscopy (XAS), we were able to discern the mechanism and pathways of As partitioning and thio-arsenic species formation. Our results provide a mechanistic understanding of the fate and transformation of arsenic during the codiagenesis of As, Fe, and S in reducing environments. Our aqueous-phase As speciation data, combined with solid-phase speciation data, indicate that sulfidation of As-sorbed ferrihydrite nanoparticles results in their transformation to trithioarsenate and arsenite, independent of the initial arsenic species used. The nature and extent of transformation and the thioarsenate species formed were controlled by S/Fe ratios in our experiments. However, arsenate was reduced to arsenite before transformation to trithioarsenate.