Plant protein-based fibers: Fabrication, characterization, and potential food applications.

Proteins from plants have been considered as safer, healthier, and more sustainable resources than their animal counterparts. However, incomplete amino acid composition and relatively poor functionality limit their applications in foods. Structuring plant proteins to fibrous architectures enhances their physicochemical properties, which can favor various food applications. This review primarily focuses on fabrication of fibers from plant proteins via self-assembly, electrospinning, solution blow spinning, wet spinning, and high-temperature shear, as well as on several applications where such fibrous proteins assemble in quality foods. The changes of protein structure and protein-protein interactions during fiber production are discussed in detail, along with the effects of fabrication conditions and protein sources on the morphology and function of the fibers. Self-assembly requires proteolysis and subsequent peptide aggregation under specific conditions, which can be influenced by pH, salt and protein type. The spinning strategy is more scalable and produces uniformed fibers with larger length scales suitable for encapsulation, food packaging and sensor substrates. Significant progress has been made on high-temperature shear (including extrusion)-induced fibers responsible for desirable texture in meat analogues. Structuring plant proteins adds values for broadened food applications, but it remains challenging to keep processes cost-effective and environmentally friendly using food grade solvents.

Rebuilding the lid region from conformational and dynamic features to engineering applications of lipase in foods: Current status and future prospects.

The applications of lipases in esterification, amidation, and transesterification have broadened their potential in the production of fine compounds with high cumulative values. Mostly, the catalytic triad of lipases is covered by either one or two mobile peptides called the "lid" that control the substrate channel to the catalytic center. The lid holds unique conformational allostery via interfacial activation to regulate the dynamics and catalytic functions of lipases, thereby highlighting its importance in redesigning these enzymes for industrial applications. The structural characteristic of lipase, the dynamics of lids, and the roles of lid in lipase catalysis were summarized, providing opportunities for rebuilding lid region by biotechniques (e.g., metagenomic technology and protein engineering) and enzyme immobilization. The review focused on the advantages and disadvantages of strategies rebuilding the lid region. The main shortcomings of biotechnologies on lid rebuilding were discussed such as negative effects on lipase (e.g., a decrease of activity). Additionally, the main shortcomings (e.g., enzyme desorption at high temperatre) in immobilization on hydrophobic supports via interfacial action were presented. Solutions to the mentioned problems were proposed by combinations of computational design with biotechnologies, and improvements of lipase immobilization (e.g., immobilization protocols and support design). Finally, the review provides future perspectives about designing hyperfunctional lipases as biocatalysts in the food industry based on lid conformation and dynamics.

Polyphenols Weaken Pea Protein Gel by Formation of Large Aggregates with Diminished Noncovalent Interactions.

Polyphenols are well-known native cross-linkers and gel strengthening agents for many animal proteins. However, their role in modifying plant protein gels remains unclear. In this study, multiple techniques were applied to unravel the influence of green tea polyphenols (GTP) on pea protein gels and the underlying mechanisms. We found that the elasticity and viscosity of pea protein gels decreased with increased GTP. The protein backbone became less rigid when GTP was present based on shortened T1ρH in relaxation solid-state NMR measurements. Electron microscopy and small-angle X-ray scattering showed that gels weakened by GTP possessed disrupted networks with the presence of large protein aggregates. Solvent extraction and molecular dynamic simulation revealed a reduction in hydrophobic interactions and hydrogen bonds among proteins in gels containing GTP. The current findings may be applicable to other plant proteins for greater control of gel structures in the presence of polyphenols, expanding their utilization in food and biomedical applications.

Atomistic Modeling of Peptide Aggregation and ß-Sheet Structuring in Corn Zein for Viscoelasticity.

The structure-function relationships of plant-based proteins that give rise to desirable texture attributes in order to mimic meat products are generally unknown. In particular, it is not clear how to engineer viscoelasticity to impart cohesiveness and proper mouthfeel; however, it is known that intermolecular ß-sheet structures have the potential to enhance the viscoelastic property. Here, we investigated the propensity of selected peptide segments within common corn α-zein variants to maintain stable aggregates and ß-sheet structures. Simulations on dimer systems showed that stability was influenced by the initial orientation and the presence of contiguous small hydrophobic residues. Simulations using eight-peptide ß-sheet oligomers revealed that peptide sequences without proline had higher levels of ß-sheet structuring. Additionally, we identified that sequences with a dimer hydrogen-bonding density of >22% tended to have a larger percent ß-sheet conformation. These results contribute to understanding how the viscoelasticity of zein can be increased for use in plant-based meat analogues.

Electrospinning Induced Orientation of Protein Fibrils.

Amyloid-like fibrils are prepared from protein in the lab by controlled heat treatments, yet these must be further assembled to match the desirable mechanical and structural properties of biological fibers. Here, ß-lactoglobulin fibrils were incorporated into poly(ethylene oxide) fibers of 40-180 nm diameter by electrospinning. Protein fibrils presented as short segments dispersed within electrospun fibers, with no change in fibril diameter after electrospinning. Imaging analysis revealed fibrils were aligned within 20° relative to the fiber long axis, and alignment was further confirmed by polarized FTIR and anisotropic SAXS/WAXS scattering patterns. The elastic modulus of fibers increased with protein fibril content from 0.8 to 2 GPa, which is superior to reported values of silk, collagen, and gelatin. The present setup allows for manufacture of large quantities of polymeric fibers containing protein fibrils with varied diameter and mechanical strength, endowing great potential for a variety of applications.

Microwave pasteurization of apple juice: Modeling the inactivation of Escherichia coli O157:H7 and Salmonella Typhimurium at 80-90 °C.

Although due to their acidity some fruit juices are considered safe, several outbreaks have been reported. For processing fruit juices, microwave heating offers advantages such as shorter come-up time, faster and uniform heating, and energy efficiency. Thus, it could be a beneficial alternative to conventional pasteurization. The objective of this study was to study the inactivation kinetics of Escherichia coli O157:H7 and Salmonella Typhimurium under microwave pasteurization at temperatures between 80 and 90 °C, i.e., at conditions that are employed in conventional pasteurization. Inoculated juices were treated at different power levels (600 W, 720 W) and treatment times (5s, 10s, 15s, 20s, 25s). Time-temperature profiles were obtained by fiber-optic sensors in contact with the samples allowing continuous data collection. The log-logistic and Arrhenius equations were used to account for the influence of the temperature history; thus, resulting in two different modeling approaches that were compared in terms of their prediction abilities. Survival kinetics including non-isothermal conditions were described by a non-linear ordinary differential equation that was numerically solved by the Runge-Kutta method (ode45 in MATLAB ®). The lsqcurvefit function (MATLAB®) was employed to estimate the corresponding survival parameters, which were obtained from freshly made apple juice, whereas the prediction ability of these parameters was evaluated on commercial apple juices. Results indicated that inactivation increased with power level, temperature, and treatment time reaching a microbial reduction up to 7 Log10 cycles. The study is relevant to the food industry because it provides a quantitative tool to predict survival characteristics of pathogens at other non-isothermal processing conditions.

Mutations in sorghum SBEIIb and SSIIa affect alkali spreading value, starch composition, thermal properties and flour viscosity.

KEY MESSAGE: Seven novel alleles of SBEIIb and one allele of SSIIa co-segregated with the ASV phenotype and contributed to distinct starch quality traits important for food-processing applications. Sorghum is an important food crop for millions of people in Africa and Asia. Whole-genome re-sequencing of sorghum EMS mutants exhibiting an alkali spreading value (ASV) phenotype revealed candidate SNPs in Sobic.004G163700 and Sobic.010G093400. Comparative genomics identified Sobic.010G093400 as a starch synthase IIa and Sobic.004G163700 as a starch branching enzyme IIb. Segregation analyses showed that mutations in Sobic.010G093400 or Sobic.004G163700 co-segregated with the ASV phenotype. Mutants in SSIIa exhibited no change in amylose content but expressed lower final viscosity and lower starch gelatinization temperature (GT) than starches from non-mutant plants. The sbeIIb mutants exhibited significantly higher amylose levels and starch GT and lower viscosity compared to non-mutant starches and ssIIa mutants. Mutations in SBEIIb had a dosage-dependent effect on amylose content. Double mutants of sbeIIb and ssIIa resembled their sbeIIb parent in amylose content, starch thermal properties and viscosity profiles. These variants will provide opportunities to produce sorghum varieties with modified starch end-use qualities important for the beer brewing and baking industries and specialty foods for humans with diabetes.

In Vitro Fecal Fermentation of High Pressure-Treated Fruit Peels Used as Dietary Fiber Sources.

Fruit by-products are being investigated as non-conventional alternative sources of dietary fiber (DF). High hydrostatic pressure (HHP) treatments have been used to modify DF content as well as its technological and physiological functionality. Orange, mango and prickly pear peels untreated (OU, MU and PPU) and HHP-treated at 600 MPa (OP/55 °C and 20 min, MP/22 °C and 10 min, PPP/55 °C and 10 min) were evaluated. Untreated and treated fruit peels were subjected to fecal in vitro fermentations. The neutral sugar composition and linkage glycosidic positions were related to the production of short chain fatty acids (SCFA) resulting from the fermentation of the materials. After HHP-treatments, changes from multibranched sugars to linear sugars were observed. After 24 h of fermentation, OP yielded the highest amount of SCFA followed by PPU and MP (389.4, 282.0 and 204.6 µmol/10 mg DF, respectively). HHP treatment increased the SCFA concentration of orange and mango peel by 7 and 10.3% respectively, compared with the untreated samples after 24 h of fermentation. The results presented herein suggest that fruit peels could be used as good fermentable fiber sources, because they yielded high amounts of SCFA during in vitro fermentations.

Molecular Dynamics Simulation for Mechanism Elucidation of Food Processing and Safety: State of the Art.

Molecular dynamics (MD) simulation is a useful technique to study the interaction between molecules and how they are affected by various processes and processing conditions. This review summarizes the application of MD simulations in food processing and safety, with an emphasis on the effects that emerging nonthermal technologies (for example, high hydrostatic pressure, pulsed electric field) have on the molecular and structural characteristics of foods and biomaterials. The advances and potential projection of MD simulations in the science and engineering aspects of food materials are discussed and focused on research work conducted to study the effects of emerging technologies on food components. It is expected by showing key case studies that it will stir novel developments as a valuable tool to study the effects of emerging food technologies on biomaterials. This review is useful to food researchers and the food industry, as well as researchers and practitioners working on flavor and nutraceutical encapsulations, dietary carbohydrate product developments, modified starches, protein engineering, and other novel food applications.

Electrostatic stabilization of ß-lactoglobulin fibrils at increased pH with cationic polymers.

In order to improve the stability of ß-lactoglobulin fibrils formed in acidic conditions to increased pH values (pH 3-7), formation of electrostatic complexes between fibrils and cationic polymers chitosan (CH), amine-terminated poly(ethylene glycol) (APEG), low molecular weight poly(ethylenimine) (LPEI), and high molecular weight poly(ethylenimine) (HPEI) was investigated by electrophoretic mobility, turbidimetry, and atomic force microscopy. Except for suspensions with APEG, addition of polycations increased ζ-potential values of the fibrils at pH 5, 6, and 7, verifying their interactions with fibrils. Maximal increase in ζ-potential at pH 7, indicating optimal electrostatic interactivity, occurred at concentrations (w/w) of 0.05, 0.01, and 0.01% (corresponding to 6.9, 50, and 4 µmol·kg(-1)) for CH, LPEI, and HPEI, respectively. Turbidity of fibril solutions at pH 5, indicating isoelectric instability, was decreased significantly with increasing concentration of CH, LPEI, and BPEI, but not with added APEG. Turbidity was increased at pH 7 with added polycation, except for suspensions containing ≥0.02% HPEI. Fibril length and resistance to aggregation, as observed by atomic force microscopy, were increased at pH 5 with increasing concentration of CH and LPEI, yet only HPEI was capable of maintaining the morphology of fibrils at pH 7. Calculated persistence lengths of the fibrils, as compared to pure fibrils at pH 3 (∼4 µm), were only slightly reduced at pH 5 with CH and at pH 7 with HPEI, but increased at pH 5 with LPEI and HPEI. Improvement in the stability of ß-lactoglobulin fibrils at higher pH conditions with the addition of polycations will contribute to their potential utilization in packaging, food, and pharmaceutical applications.