Single-mode solarization-free hollow-core fiber for ultraviolet pulse delivery.

In this paper, we report anti-resonant silica hollow-core fibers (AR-HCFs) for solarization-free ultraviolet (UV) pulse transmission. The new fibers reported have lower attenuation than any previous HCFs for this spectral range. We report a single fiber that guides over a part of the UV-C and the whole of the UV-A spectral regions in adjacent transmission bands. A second AR-HCF is used for delivery of 17 nanosecond laser pulses at 266 nm at 30 kHz repetition rate. The fiber maintained a constant transmission, free of silica fluorescence and solarization-induced fiber degradation while delivering 0.46 µJ pulses for a period of over one hour. By direct comparison, we demonstrate that the single-mode AR-HCF significantly outperforms commercially-available high-OH and solarization-resistant silica multimode fibers for pulsed light delivery in this spectral range.

Selective Mechanical Transfer Deposition of Langmuir Graphene Films for High-Performance Silver Nanowire Hybrid Electrodes.

In this work, we present silver nanowire hybrid electrodes prepared through the addition of small quantities of pristine graphene by mechanical transfer deposition from surface-assembled Langmuir films. This technique is a fast, efficient, and facile method for modifying the optoelectronic performance of AgNW films. We demonstrate that it is possible to use this technique to perform two-step device production by selective patterning of the stamp used, leading to controlled variation in the local sheet resistance across a device. This is particularly attractive for producing extremely low cost sensors on arbitrarily large scales. Our aim is to address some of the concerns surrounding the use of AgNW films as replacements for indium tin oxide (ITO), namely, the use of scarce materials and poor stability of AgNWs against flexural and environmental degradation.

Carbon Nanofoam Supercapacitor Electrodes with Enhanced Performance Using a Water-Transfer Process.

Carbon nanofoam (CNF) is a highly porous, amorphous carbon nanomaterial that can be produced through the interaction of a high-fluence laser and a carbon-based target material. The morphology and electrical properties of CNF make it an ideal candidate for supercapacitor applications. In this paper, we prepare and characterize CNF supercapacitor electrodes through two different processes, namely, a direct process and a water-transfer process. We elucidate the influence of the production process on the microstructural properties of the CNF, as well as the final electrochemical performance. We show that a change in morphology due to capillary forces doubles the specific capacitance of the wet-transferred CNF electrodes.

Finite-size scaling in silver nanowire films: design considerations for practical devices.

We report the first application of finite-size scaling theory to nanostructured percolating networks, using silver nanowire (AgNW) films as a model system for experiment and simulation. AgNWs have been shown to be a prime candidate for replacing Indium Tin Oxide (ITO) in applications such as capacitive touch sensing. While their performance as large area films is well-studied, the production of working devices involves patterning of the films to produce isolated electrode structures, which exhibit finite-size scaling when these features are sufficiently small. We demonstrate a generalised method for understanding this behaviour in practical rod percolation systems, such as AgNW films, and study the effect of systematic variation of the length distribution of the percolating material. We derive a design rule for the minimum viable feature size in a device pattern, relating it to parameters which can be derived from a transmittance-sheet resistance data series for the material in question. This understanding has direct implications for the industrial adoption of silver nanowire electrodes in applications where small features are required including single-layer capacitive touch sensors, LCD and OLED display panels.

Laser patterning of transparent conductive metal nanowire coatings: simulation and experiment.

Transparent and electrically conductive metal nanowire networks are possible replacements for costly indium tin oxide (ITO) films in many optoelectronic devices. ITO films are regularly patterned using pulsed lasers so similar technologies could be used for nanowire coatings to define electrode structures. Here, the effects of laser irradiation on conducting silver nanowire coatings are simulated and then investigated experimentally for networks formed by spray deposition onto transparent substrates. The ablation threshold fluence is found experimentally for such nanowire networks and is then related to film thickness. An effective model using finite-element heat transfer analysis is examined to look at energy dissipation through these nanowire networks and used to understand mechanisms at play in the laser-material interactions. It is demonstrated that the three-dimensional nature of these coatings and the relative ratios of the rates of lateral to vertical heat diffusion are important controlling parameter affecting the ablation threshold.