Importance of periodontal phenotype in periodontics and restorative dentistry: a systematic review.

BACKGROUND: Periodontal phenotype is regarded to be one of the key factors influencing the efficacy of restorative therapies in dental practice. The objective of the systematic review was to explore the importance of thin and thick periodontal phenotypes and how they affect the outcome of periodontal and restorative therapies by looking at a number of academic publications from various online databases. METHODS: Following the PRISMA guidelines (Preferred Reporting Items for Systematic Review standards), relevant data will be searched and retrieved from three significant scientific databases, including PubMed, EBSCO, and Scopus. The articles with full texts that matched the keywords and published in English between 2018 and 2023 were taken into consideration. RESULTS: The majorities of these articles were based on the type of periodontal phenotype and their impact on periodontal and restorative treatment outcomes were selected. The initial search yielded a total of 530 articles. Only 273 were relevant to the review's objectives, and these were considered for determining eligibility. Only 20 publications were eligible for analysis. CONCLUSION: Understanding these anatomical aspects of periodontal phenotype is crucial to both periodontology and restorative dentistry. The clinical outcome of restorative, prosthetic, orthodontic, surgical, and periodontal therapies is determined in large part by the periodontal phenotype, which also plays a significant role in clinical failure or success in dental treatments. TRIAL REGISTRATION: This study protocol registered with the International Prospective Register of Systematic Reviews (PROSPERO) dated 16th June 2023 with the registration ID CRD42023432568.

Assessment of dimensional stability of novel VPES impression material at different time intervals with standard disinfectants.

BACKGROUND: Vinyl polyether silicone (VPES) is a novel impression biomaterial made of a combination of vinyl polysiloxane (VPS) and polyether (PE). Thus, it is significant to assess its properties and behaviour under varied disinfectant test conditions. This study aimed to assess the dimensional stability of novel VPES impression material after immersion in standard disinfectants for different time intervals. METHODS: Elastomeric impression material used -medium body regular set (Monophase) [Exa'lence GC America]. A total of 84 Specimens were fabricated using stainless steel die and ring (ADA specification 19). These samples were distributed into a control group (n=12) and a test group (n=72). The test group was divided into 3 groups, based on the type of disinfectant used - Group-A- 2% Glutaraldehyde, Group-B- 0. 5% Sodium hypochlorite and Group-C- 2% Chlorhexidine each test group was further divided into 2 subgroups (n=12/subgroup) based on time intervals for which each sample was immersed in the disinfectants - subgroup-1- 10 mins and Subgroup 2- 30 mins. After the impression material was set, it was removed from the ring and then it was washed in water for 15 seconds. Control group measurements were made immediately on a stereomicroscope and other samples were immersed in the three disinfection solutions for 10 mins and 30 mins to check the dimensional stability by measuring the distance between the lines generated by the stainless steel die on the samples using a stereomicroscope at x40 magnification. RESULTS: The distance measured in the control group was 4397.2078 µm and 4396.1571 µm; for the test group Group-A- 2% Glutaraldehyde was 4396.4075 µm and 4394.5992 µm; Group-B- 0. 5% Sodium hypochlorite was 4394.5453 µm and 4389.4711 µm Group-C- 2% Chlorhexidine was 4395.2953 µm and 4387.1703 µm respectively for 10 mins and 30 mins. Percentage dimensional change was in the range of 0.02 - 0.25 for all the groups for 10 mins and 30 mins. CONCLUSIONS: 2 % Glutaraldehyde is the most suitable disinfectant for VPES elastomeric impression material in terms of dimensional stability and shows minimum dimensional changes as compared to that of 2% Chlorhexidine and 0.5% Sodium hypochlorite.

Clinical metabolomics by NMR revealed serum metabolic signatures for differentiating sarcoidosis from tuberculosis.

BACKGROUND: Pulmonary sarcoidosis (SAR) and tuberculosis (TB) are two granulomatous lung-diseases and often pose a diagnostic challenge to a treating physicians. OBJECTIVE: The present study aims to explore the diagnostic potential of NMR based serum metabolomics approach to differentiate SAR from TB. MATERIALS AND METHOD: The blood samples were obtained from three study groups: SAR (N = 35), TB (N = 28) and healthy normal subjects (NC, N = 56) and their serum metabolic profiles were measured using 1D 1H CPMG (Carr-Purcell-Meiboom-Gill) NMR spectra recorded at 800 MHz NMR spectrometer. The quantitative metabolic profiles were compared employing a combination of univariate and multivariate statistical analysis methods and evaluated for their diagnostic potential using receiver operating characteristic (ROC) curve analysis. RESULTS: Compared to SAR, the sera of TB patients were characterized by (a) elevated levels of lactate, acetate, 3-hydroxybutyrate (3HB), glutamate and succinate (b) decreased levels of glucose, citrate, pyruvate, glutamine, and several lipid and membrane metabolites (such as very-low/low density lipoproteins (VLDL/LDL), polyunsaturated fatty acids, etc.). CONCLUSION: The metabolic disturbances not only found to be well in concordance with various previous reports, these further demonstrated very high sensitivity and specificity to distinguish SAR from TB patients suggesting serum metabolomics analysis can serve as surrogate method in the diagnosis and clinical management of SAR.

Online Questionnaire-Based Study to Evaluate the Attitudes and Use of Rubber Dental Dams by Saudi Dental Practitioners.

BACKGROUND A dental dam is a protective sheet with an aperture and is used to prevent the spread of infection during dental procedures. This study aimed to use a 2-part online questionnaire to evaluate the attitudes and use of rubber dental dams by 300 Saudi dental interns, general dental practitioners, residents, specialists, and consultants in prosthodontics, endodontics, and restorative dentistry. MATERIAL AND METHODS The 17-item validated questionnaire consisted of 5 questions on demographics, 2 on knowledge, 6 on attitudes, and 4 on perceptions. It was distributed through Google Forms. The chi-square test was used to determine the associations between the study variables and perception questions. RESULTS A total of 41.67% participants were specialists/consultants, among which 59.2% were in the prosthodontics specialty, 12.8% in endodontics, and 28% in restorative dentistry. Most participants (84.67%) stated the necessity of using rubber dams during post and core procedures. A total of 53.67% had received enough training for using rubber dams during their undergraduate/residency education. The majority of participants (41%) also preferred using rubber dams during the prefabricated post and core procedures, and 28.33% stated that the remaining tooth structure was one of the major reasons for not using rubber dams during the post and core procedures. CONCLUSIONS Workshops and hands-on training should be conducted among dental graduates to instill a positive attitude regarding the use of rubber dams.

Influence of different surface treatment on bonding of metal and ceramic Orthodontic Brackets to CAD-CAM all ceramic materials.

BACKGROUND: Developing efficient bonding techniques for orthodontic brackets and all-ceramic materials continues to pose a clinical difficulty. This study aimed to evaluate the shear bond strengths (SBS) of metal and ceramic brackets to various all-ceramic CAD-CAM materials, such as lithium disilicate CAD (LDS-CAD), polymer-infiltrated ceramic (PIC), zirconia-reinforced lithium silicate glass ceramic (ZLS), and 5YTZP zirconia after different surface treatments and thermal cycling. MATERIALS AND METHODS: The samples were divided into two groups to be bonded with ceramic and metal lower incisor brackets. Each group was subdivided into a control group devoid of any surface treatment, 10% HF acid (HFA) etching, ceramic etch & prime (MEP), Al2O3 air abrasion, and medium grit diamond bur roughening. After surface treatment, brackets were bonded with composite resin cement, thermal cycled, and tested for shear bond strength. The failed surfaces were evaluated with a digital microscope to analyse the type of failure. The data were statistically analysed using a one-way ANOVA and Tukey HSD tests at p < 0.05. RESULTS: The highest mean bond strengths were found with HFA etching in LDS-CAD (13.17 ± 0.26 MPa) and ZLS (12.85 0.52 MPa). Diamond bur recorded the lowest mean bond strength roughening across all the ceramic groups. There were significant differences in mean shear bond values per surface treatment (p < 0.001) and ceramic materials. CONCLUSION: Among the surface treatment protocols evaluated, HFA etching and MEP surface treatment resulted in enhanced bond strength of both ceramic and metal brackets to CAD-CAM all ceramic materials.

Comparative evaluation of open tray impression technique: investigating the precision of four splinting materials in multiple implants.

BACKGROUND: This study aimed to determine the relative positioning accuracy of multiple implants utilizing four distinct types of splinting materials. METHODS: The purpose of this in-vitro study was to compare the precision of four splinting materials in an open tray impression technique in multiple implant situations. Based on the material used for splinting, four groups were made (n = 40)- Group A: Conventional Method, Group B: Prefabricated Pattern Resin Framework, Group C: Prefabricated Metal Framework, Group D: Light Cured Pattern Resin, these groups were compared with the master model. A heat-cured clear acrylic resin and a master model were constructed. A pilot milling machine drill was used to drill four parallel holes in the anterior and premolar regions, which were later labeled as A, B, C, and D positions from right to left. Then, sequential drilling was carried out, and four 3.75­mm diameter and 13-mm long ADIN implant analogs with internal hex were placed in the acrylic model using a surveyor for proper orientation. The impression posts were then manually screwed to the implant analogs using an open tray, and they were secured to the implants using 10 mm flat head guide pins with a 15 N.cm torque. 10 Open tray polyether impressions were made, and casts were poured. Each splinting method's distortion values were measured using a coordinate measuring machine capable of recordings in the X-, Y-, and Z-axes. Comparison of mean distances for X1, X2, and X3 was made using the Kruskal-Wallis test, and Pairwise comparison was done using Post Hoc Tukey's Test. RESULTS: The differences between the groups were significant when assessing the distances X1, X2, and X3 (p < 0.05). The comparison of deviations between the groups revealed a statistically significant difference (p < 0.05) for the deviation distance X3 but not for the deviation distances X1 and X2. For distance Y1, the difference between the groups was statistically significant (p0.05), but it was not significant for distances Y2 and Y3. A statistically significant difference was seen in the comparison between the groups (p < 0.05) for the deviation distances Y1, Y2, and Y3. The results were statistically significant for the distance Z1 comparisons, namely, control vs. Group A (p = 0.012), control vs. Group B (p = 0.049), control vs. Group C (p = 0.048), and control vs. Group D (p = 0.021), and for distance Z3 comparison for control vs. Group A (p = 0.033). The results were statistically insignificant for the distance Z2 comparisons (p > 0.05). CONCLUSIONS: All splinting materials produced master casts with measurements in close proximity to the reference model. However, prefabricated pattern resin bars splinting showed the highest accuracy among the studied techniques. The most recent splinting techniques using prefabricated metal framework and light-cure pattern resin showed similar accuracy.

Clinical Trial to Assess Physiology and Activity of Masticatory Muscles of Complete Denture Wearer Following Vitamin D Intervention.

Background and Objectives: Little information is available on the role of Vitamin D as a micro-nutrient deficiency with masticatory muscle efficiency and its effect on the function of removable prosthesis. The aim of this study was to evaluate the role of vitamin D on masticatory muscle activity among completely edentulous patients and its effect on the retention of removable complete dentures (RCDs). Materials and Methods: A non-randomized clinical control trial was conducted on completely edentulous patients (60.53 ± 7.01 years) in the Indian population between 2017 and 2019. Subjects were evaluated for temporomandibular disorders according to the Diagnostic Criteria for Temporomandibular Disorders (DC/TMD). Serum Vitamin D (S Vit D) levels, Ultrasonography (USG), and surface Electromyography (sEMG) readings of the masseter muscle were recorded at enrolment (Level 0), after 3 months of Vitamin D therapy (Level 3), and after consecutive 3 months of maintenance therapy, i.e., after 6 months from baseline (Level 6). The fabrication of new RCDs was done for all after the enrolment, and the retention of RCDs was assessed by asking a question regarding denture retention and asking respondents to mark their satisfaction on a 5-point Likert scale. Data were analysed using ANOVA, Paired'-test and Pearson correlation coefficients. A p-value less than 0.05 indicated a statistically significant association. Results: Between enrolment and a six-month follow-up, S Vit D levels showed an increase from 16.03 ± 5.68 ng/mL to 31.35 ± 9.28 ng/mL, showing an increase of 15.32 ± 9.38 ng/mL (95.57% rise). Statistically significant values were observed for USG and sEMG. Conclusions: Results showed that S Vit D affects masticatory muscle activity by improving its thickness and boosting its tonicity. Healthy muscles assist in the retention of RCDs, consequently aiding in mastication, speech, and phonetics, hence improving patient satisfaction. Clinical implication: Acknowledging the fact that the prevalence of Vitamin D deficiency is worldwide. We suggest Vitamin D therapy as a nutritional intervention among the elderly completely edentulous population, following dietary counselling, and consider Vitamin D therapy to be an adjunct to nutritional counselling for improving masticatory muscle activity and efficiency, which aids in RCD retention and stability. Consequently, improving oral health-related quality of life for individuals.

Overexpression of P-glycoprotein and MRP-1 are pharmacogenomic biomarkers to determine steroid resistant phenotype in childhood idiopathic nephrotic syndrome.

Steroid remains the keystone therapy for Idiopathic Nephrotic Syndrome (NS). Besides genetic factors and histological changes, pharmacogenomic factors also affect the steroid response. The upregulation of P-glycoprotein (P-gp) and Multidrug resistance-associated protein 1 (MRP-1) modulate the pharmacokinetics of steroids and may contribute to steroid resistance. Flow-cytometric analysis of P-gp, MRP-1 expression and functional activity on peripheral blood mononuclear cells (PBMCs) was carried out in steroid-sensitive nephrotic syndrome (SSNS) (n = 171, male 103, mean age = 8.54 ± 4.3); and steroid-resistant nephrotic syndrome (SRNS) (n = 83, male 43, mean age = 7.43 ± 4.6) patients. The genotypings of MDR-1 gene were carried out using PCR-RFLP. We observed that the percentage expression of P-gp (10.01 ± 2.09 and 3.79 ± 1.13, p < 0.001); and MRP-1 (15.91 ± 3.99 and 7.40 ± 2.33, p < 0.001) on lymphocyte gated population were significantly higher in SRNS than that of SSNS. The functional activity of P-gp and MRP-1 was also significantly escalated in SRNS as compared to SSNS (68.10 ± 13.35 and 28.93 ± 7.57, p < 0.001); (72.13 ± 8.34 and 31.56 ± 8.65, p < 0.001) respectively. AUC-ROC curve analysis revealed that P-gp and MRP-1 expression with a cut-off value of 7.13% and 9.62% predicted SRNS with the sensitivity of 90% and 80.7%; and specificity 90% and 80%, respectively. Moreover, MDR-1 homozygous mutant TT+AA for G2677T/A (rs2032582) was significantly associated with SRNS (p = 0.025, OR = 2.86 CI = 1.14-7.14). The expression of P-gp (9.68 ± 4.99 v/s 5.88 ± 3.38, p = 0.002) was significantly higher in the patients of homozygous mutant alleles compared to wildtype GG. The increased expression and functionality of P-gp and MRP-1 contribute to steroid resistance, and MDR-1 homozygous mutant G2677T/A promotes steroid resistance by inducing P-gp expression in NS.

An In Vivo Study to Compare Location of Neutral Zone Recorded with Two Materials.

AIM: To establish a relationship between the crest of the alveolar ridge and neutral zone and to compare its location recorded by two different material. METHODS AND MATERIALS: Thirty subjects were selected, and the location of the neutral zone was compared with the mandibular alveolar ridge crest. For each subject neutral zone was recorded by two different recording materials-Low fusing impression compound and tissue conditioner. After neutral zone recording, the relation between mandibular ridge crest and neutral zone location examined radiographically. The data so collected were checked for normality, descriptive statistics and the Mann-Whitney U test was used. RESULTS: Position of neutral zone was found towards lingual in the posterior, labial side in anterior and almost near to the alveolar ridge crest in premolar region. The thermoplastic flow of the material effects the position of neutral zone but no significant difference was noted in the positions of neutral zone recorded by the two materials in relation to the alveolar ridge crest. CONCLUSION: Location of the neutral zone is not affected by the material used in recording it. CLINICAL SIGNIFICANCE: The location of the neutral zone varies from subject to subject and mainly depends upon their musculature and can be recorded accurately by using correct technique irrespective of the materials used.

Correlation of Neutrophil CD64 with Clinical Profile and Outcome of Sepsis Patients during Intensive Care Unit Stay.

INTRODUCTION: Neutrophil CD64 (nCD64) has been found to identify sepsis from nonseptic patients. It is also reported to be a predictor of survival and severity of sepsis. The goal of this study was to correlate serial nCD64 with Intensive Care Unit (ICU) outcome and severity of sepsis. MATERIALS AND METHODS: A prospective observational study was conducted in 12-bedded critical care unit of a tertiary care center. Adult patients with sepsis were included in this study. Demographics, illness severity scores, clinical parameters, laboratory data, and 28-day outcome were recorded. Serial nCD64 analysis was done (on days 0, 4, and 8) in consecutive patients. RESULTS: Fifty-one consecutive patients were included in the study. Median Acute Physiology and Chronic Health Evaluation II was 16 (12-20) and mean Sequential Organ Failure Assessment was 9 (8-10). Compared to survivors, nonsurvivors had higher nCD64 on day 8 (P = 0.001). nCD64 was higher in the septic shock group compared to sepsis group on days 0 and 8 (P < 0.05). Survivors showed improving trend of nCD64 over time while nonsurvivors did not. This trend was similar in the presence or absence of septic shock. nCD64 count was a good predictor of the septic shock on day 0 (area under the curve [AUC] = 0.747, P = 0.010) and moderate predictor at day 8 (AUC = 0.679, P = 0.028). CONCLUSION: Monitoring serial nCD64 during ICU stay may be helpful in determining the clinical course of septic patients.

Minimal hepatic encephalopathy in children with chronic liver disease: Prevalence, pathogenesis and magnetic resonance-based diagnosis.

BACKGROUND & AIMS: Data on minimal hepatic encephalopathy (MHE) in children is scarce. We aimed to study MHE in children with chronic liver disease (CLD) and to validate non-invasive objective tests which can assist in its diagnosis. METHODS: We evaluated 67 children with CLD (38 boys; age 13 [7-18] years) and 37 healthy children to determine the prevalence of MHE. We also assessed the correlation of MHE with changes in brain metabolites by magnetic resonance spectroscopy (1HMRS), diffusion tensor imaging (DTI) derived metrics, blood ammonia and inflammatory cytokines (interleukin-6 [IL6], tumor necrosis factor alpha [TNF-α]). In addition, the accuracy of MR-based investigations for diagnosis of MHE in comparison to neuropsychological tests was analysed. RESULTS: Thirty-four (50.7%) children with CLD had MHE on neuropsychological tests. MHE patients had higher BA (30.5 [6-74] vs. 14 [6-66]µmol/L; p=0.02), IL-6 (8.3 [4.7-28.7] vs. 7.6 [4.7-20.7]pg/ml; p=0.4) and TNF-α (17.8 [7.8-65.5] vs. 12.8 [7.5-35]pg/ml; p=0.06) than No-MHE. 1HMRS showed higher glutamine (2.6 [2.1-3.3] vs. 2.4 [2.0-3.1]; p=0.02), and lower choline (0.20 [0.14-0.25] vs. 0.22 [0.17-0.28]; p=0.1) and myo-inositol (0.25 [0.14-0.41] vs. 0.29 [0.21-0.66]; p=0.2) in MHE patients than those without MHE. Mean diffusivity (MD) on DTI was significantly higher in 6/11 brain areas in patients with MHE vs. no MHE. Brain glutamine had a significant positive correlation with blood ammonia, IL-6, TNF-α and MD of various brain regions. Neuropsychological tests showed a negative correlation with blood ammonia, IL6, TNF-α, glutamine and MD. Frontal white matter MD had a sensitivity and specificity of 73.5% and 100% for diagnosing MHE. CONCLUSIONS: In children with CLD, 50% have MHE. There is a significant positive correlation between markers of hyperammonemia, inflammation and brain edema and these correlate negatively with neuropsychological tests. MD on DTI is a reliable tool for diagnosing MHE. LAY SUMMARY: Fifty percent of children with chronic liver disease develop minimal hepatic encephalopathy (MHE) and perform poorly on neuropsychological testing. These children have raised blood ammonia, inflammatory cytokines and mild cerebral edema on diffusion tensor imaging as compared to children without MHE. The higher the ammonia, inflammatory cytokines and cerebral edema levels the poorer the performance on neuropsychological assessment. The estimation of mean diffusivity on diffusion tensor imaging is an objective and reliable method for diagnosing MHE.

Differential alteration in peripheral T-regulatory and T-effector cells with change in P-glycoprotein expression in Childhood Nephrotic Syndrome: A longitudinal study.

INTRODUCTION: Childhood Idiopathic Nephrotic Syndrome (INS) responds to glucocorticoid therapy, however, 60-80% of patients relapse and some of them become steroid non responsive. INS may occur because of T cell dysfunction, abnormal cytokines and podocytopathies which reverse on steroid treatment. The reason of relapses could be imbalances in T cells phenotypes and respective cytokines. Herein, we hypothesize that relapses in INS may occur due to imbalance in T-regulatory and T-effector cell with their respective cytokines and overexpression of P-gp on lymphocytes. METHODS: The frequency of peripheral blood CD4(+)CD25(+)FoxP3(+) Treg, CD4(+)IFN-γ(+) Th1 and CD4(+)IL-4(+) Th2 lymphocytes and their respective cytokines and P-gp expression on peripheral blood lymphocytes (PBLs) were analyzed in INS patients at baseline (n=26), during remission (n=24) and at relapse (n=15). RESULTS: Compared to baseline, the frequency of Tregs was significantly increased at remission and decreased during relapse. In contrast, the frequency of Th1 and Th2 lymphocytes was significantly decreased during remission and increased at the time of relapse. Similarly, expression of P-gp was significantly high at baseline and at the time of relapse as compared to remission. Levels of cytokines IL-10 and TGF-ß in the supernatant of stimulated PBMCs was increased during remission and decreased during relapse. In contrast, levels of IFN-γ and IL-4 were decreased during remission and increased at the time of relapse. CONCLUSIONS: Steroid therapy in INS induces decreased P-gp expression on PBLs along with increased frequency and cytokine response of T-regulatory cells, and reduced frequency and respective cytokine response of Th1 and Th2 cells during remission. However, reversal in the frequency and respective cytokines of T-regs, Th1 and Th2, and P-gp expression on PBLs occurs during relapses on follow-up.

Comparative evaluation of the accuracy of two electronic apex locators in detecting simulated incomplete vertical root fractures: An in vitro stereomicroscopic study.

Aim: The aim of this study was to compare the accuracy of two different electronic apex locators (EALs) in detecting simulated incomplete vertical root fractures (VRFs). Materials and Methods: Thirty freshly extracted single-rooted teeth were randomly divided into three groups of 10 teeth each labeled as Groups A, B, and C. Incomplete VRFs were simulated in the coronal, middle, and apical one-third of the roots for Groups A, B, and C, respectively. The teeth were embedded in alginate mold and fracture location was determined with Root ZX and Propex EALs for each sample and each group. To calculate the actual length (AL), each sample was sectioned at the upper level of the vertical fracture, and the length was measured by setting the stopper of the #10 K file under a stereomicroscope at ×30 magnification. The electronic lengths and ALs were compared using computer software, and the results were analyzed using SPSS 28.0 at a 95% confidence level. Results: No significant differences were seen in the accuracy of the two EALs when compared with ALs. Root ZX showed significantly longer measurements than ALs in groups B and C. Conclusion: The tested EALs showed low accuracy (20%) in detecting simulated incomplete VRFs with a tendency for longer measurements compared to ALs.

Assessment of changes in enamel colour following fixed orthodontic therapy using an advanced spectrophotometer: An in vivo study.

BACKGROUND: Any manipulation of the surface of natural teeth may result in a variation of their colour. The fixed orthodontic treatment (FOT) is one such procedure which alters the enamel surface during the procedure. OBJECTIVE: To clinically evaluate the colour changes in teeth associated with comprehensive FOT (to compare the changes in test and control groups) and to determine the relationship of age and gender on enamel colour due to FOT by using an advanced spectrophotometer. METHODS: The selection of sixty patients for the study was done randomly and among these thirty patients who underwent the FOT as the case group, the other thirty patients who did not need FOT, were the control group. The recordings of spectrophotometric data were done in a standardized manner for all patients in the labial circular region of every anterior tooth, following debonding and cleaning operations, and before bracket bonding. The Commission Internationale de l'Eclairage's L*, a*, and b* (lightness, red/green, and blue/yellow) tooth-type characteristics were used to measure color, and the associated color differences (DE) between the groups were computed. One-way ANOVA (a < 0.05) and the paired t-test were used to evaluate any changes in these color characteristics. RESULTS: Fixed orthodontic treatment is associated with changes in colour parameters. L* values decreased (P< 0.001), while a* and b* values increased (P< 0.001) at the end of treatment. All measured tooth types showed significant colour change (DE); their mean differences ranged from 1.64 to 2.96 DE units. CONCLUSIONS: Fixed orthodontics can change the natural colour of teeth. The CIE colour parameters L*, a*, and b* of natural teeth showed statistically significant differences after debonding the orthodontic appliances. The L* values decreased making the teeth look darker. The adolescent and male patients had more tooth colour changes than the adult and female groups.

Analysis of modified palatal surface for better speech in edentulous patients: A clinico-analytical study.

BACKGROUND: Phonetics with mechanics and aesthetics are considered cardinal factors contributing to the success of complete dentures. OBJECTIVE: The aim of the current study was to evaluate the changes in speech in complete denture patients with and without palatal surface changes. METHODS: The data collected for the study involved completely edentulous Patients (n= 80). Patients were divided into two groups. Group A: Up to 50 years (n= 40); Group B: Above 50 years (n= 40) (including male and female). Each group was further divided into four subgroups for speech analysis-without dentures (A1/B1); with conventional dentures (A2/B2); dentures with a palatogram (A3/B3) and dentures with palate sandblasted (A4/B4). The speech sounds of all patients were evaluated for pitch and intensity using a spectrophotogram (Praat software) and Likert scale. The data so obtained from the quantitative and qualitative analysis were statistically analysed through one-way ANOVA, unpaired student's t-test, and Pearson correlation coefficient. Qualitative analysis was done with the Mann-Whitney U test. RESULTS: The maximum mean value of the pitch and intensity in Groups A and B was subgroup A3 (Palatogram) 190.37 ± 21.50 and 77.07 ± 7.58, B3 (Palatogram) 190.87 ± 24.36 and 75.33 ± 8.12. When comparing Groups A [A1, A2, A3, A4] and B [B1, B2, B3, B4] on the basis of pitch and intensity, a statistically insignificant value was found. No changes in speech sounds (pitch and intensity) were observed in terms of age. Both quantitative and qualitative analysis results showed that speech sounds in the patients with palatogram, had the highest pitch and intensity and were most clear to the listener and there were statistically significant differences from other groups. CONCLUSION: Speech was better in palatogram-based dentures in comparison to a sandblasted denture, conventional denture and without denture in terms of qualitative and quantitative analysis. The physiologic nature of the palatogram fabrication technique produces the palatal part of the denture more compatible with the tongue, thus producing better speech.

Quantum mechanical analysis of yttrium-stabilized zirconia and alumina: implications for mechanical performance of esthetic crowns.

BACKGROUND: Yttrium-stabilized zirconia (YSZ) and alumina are the most commonly used dental esthetic crown materials. This study aimed to provide detailed information on the comparison between yttrium-stabilized zirconia (YSZ) and alumina, the two materials most often used for esthetic crowns in dentistry. METHODOLOGY: The ground-state energy of the materials was calculated using the Cambridge Serial Total Energy Package (CASTEP) code, which employs a first-principles method based on density functional theory (DFT). The electronic exchange-correlation energy was evaluated using the generalized gradient approximation (GGA) within the Perdew (Burke) Ernzerhof scheme. RESULTS: Optimization of the geometries and investigation of the optical properties, dynamic stability, band structures, refractive indices, and mechanical properties of these materials contribute to a holistic understanding of these materials. Geometric optimization of YSZ provides important insights into its dynamic stability based on observations of its crystal structure and polyhedral geometry, which show stable configurations. Alumina exhibits a distinctive charge, kinetic, and potential (CKP) geometry, which contributes to its interesting structural framework and molecular-level stability. The optical properties of alumina were evaluated using pseudo-atomic computations, demonstrating its responsiveness to external stimuli. The refractive indices, reflectance, and dielectric functions indicate that the transmission of light by alumina depends on numerous factors that are essential for the optical performance of alumina as a material for esthetic crowns. The band structures of both the materials were explored, and the band gap of alumina was determined to be 5.853 eV. In addition, the band structure describes electronic transitions that influence the conductivity and optical properties of a material. The stability of alumina can be deduced from its bandgap, an essential property that determines its use as a dental material. Refractive indices are vital optical properties of esthetic crown materials. Therefore, the ability to understand their refractive-index graphs explains their transparency and color distortion through how the material responds to light..The regulated absorption characteristics exhibited by YSZ render it a highly attractive option for the development of esthetic crowns, as it guarantees minimal color distortion. CONCLUSION: The acceptability of materials for esthetic crowns is strongly determined by mechanical properties such as elastic stiffness constants, Young's modulus, and shear modulus. YSZ is a highly durable material for dental applications, owing to its superior mechanical strength.

Convalescing Mandibular Anterior Crowding through Piezocision and the Micro-Osteoperforation Surgical Procedure-A Clinical Comparative Study.

BACKGROUND: Minimally invasive periodontic (perio) surgical procedures, piezocision, and micro-osteoperforation are useful techniques for accelerating tooth movement. These techniques also offer advantages in the orthodontic (ortho) and aesthetic domains. This study aimed to evaluate and compare the rates of lower anterior decrowding with piezocision and micro-osteoperforation. METHODS: This clinical study included 24 patients requiring fixed orthodontic treatments. Two periodontic techniques (piezocision (PZ) and micro-osteoperforation (MOP)) were considered for the orthodontic treatments. Each patient was randomly allocated to either the piezocision (PZ) group or the micro-osteoperforation (MOP) group. The piezocision group received five radiographically guided incisions on the labial surface of the alveolar bone, whereas the micro-osteoperforation group received one to three MOPs each using a mini-implant drill between the six lower anterior teeth, and later, an initial arch wire was ligated to each bracket. Little's irregularity index (LII) was calculated using a digital vernier caliper on study models every four weeks until decrowding was achieved. The difference in the rates of lower anterior crowding between the piezocision and micro-osteoperforation groups was analyzed to determine the statistical significance. RESULTS: The rates of irregularity index change during decrowding were 4.38 ± 0.61 in the piezocision group and 3.82 ± 0.47 in the micro-osteoperforation group. Piezocision was found to be 1.2 times faster than micro-osteoperforation in terms of the rate of decrowding. CONCLUSION: The advanced perio-ortho combination technique was advantageous in accelerated decrowding. In comparison to MOP, there was an increase in the rate of decrowding with PZ. Decrowding can be completed quickly with PZ, and it can thus be used to treat crowding effectively in a limited time frame.

Atraumatic herniation of buccal pad of fad in a neonate - A case report.

A case report of the clinical features and follow-up of an unusual case of a three-day-old baby boy with bilateral protrusion of the buccal pad of fat into the oral cavity. A follow-up of two years is also presented here. No history of trauma was reported. The swellings gradually decreased in size and finally disappeared by the age of 22 months. Hence, the clinician should be aware about this self-limiting and self-disappearing developmental anomaly.

Unravelling the role of Sildenafil and SB204741 in suppressing fibrotic potential of peritoneal fibroblasts obtained from PD patients.

Introduction: Peritoneal fibrosis (PF) results in technique failure in peritoneal dialysis (PD) patients. Peritoneal fibroblasts are characterized by increase in the ACTA2 gene, responsible for alpha smooth muscle actin (α-SΜΑ), extracellular matrix (ECM) production, and inflammatory cytokines production, which are the are key mediators in the pathogenesis of PF. 5-hydroxytryptamine (5-HT; serotonin) induces ECM synthesis in fibroblasts in a transforming growth factor-beta 1 (TGF-ß1) dependent manner. The purpose of our study was to identify the potential mechanism and role of sildenafil and 5HT2B receptor inhibitor (SB204741) combination in attenuating PD-associated peritoneal fibrosis. Methods: Studies were performed to determine the effect of TGF-ß1, sildenafil, and SB204741 on human peritoneal fibroblasts (HPFBs) isolated from the parietal peritoneum of patients in long-term PD patients (n = 6) and controls (n = 6). HPFBs were incubated with TGF-ß1 (10 ng/mL) for 1 h and later with TGF-ß1 (10 ng/mL)/[sildenafil (10 µM) or SB204741 (1 µM)] and their combination for 24 h (post-treatment strategy). In the pre-treatment strategy, HPFBs were pre-treated with sildenafil (10 µM) or SB204741 (1 µM) and a combination of the two for 1 h and later with only TGF-ß1 (10 ng/mL) for 24 h. Results: The anti-fibrotic effects of the combination of sildenafil and SB204741 were greater than that of each drug alone. In TGF-ß1-stimulated HPFBs, pro-fibrotic genes (COL1A1, COL1A2, ACTA2, CTGF, FN1, and TGFB1) exhibited higher expression than in controls, which are crucial targets of sildenafil and SB204741 against peritoneal fibrosis. The synergistic approach played an anti-fibrotic role by regulating the pro- and anti-fibrotic gene responses as well as inflammatory cytokine responses. The combination treatment significantly attenuated peritoneal fibrosis, as evident by the almost complete amelioration of ACTA2 expression, restoration of anti-fibrotic genes (MMP2/TIMP1), and, at least, by reducing the expression of pro-inflammatory cytokines (IFN-γ, IL-4, IL-17, IL-1ß, IL-6, TNF-α, and TGF-ß1) along with an increase in IL-10 levels. Discussion: Taken together, the above research evidences that the combination of sildenafil and SB204741 may have therapeutic potential in suppressing peritoneal fibrosis due to peritoneal dialysis.

Synthesis, characterization, and in silico studies of 1,8-naphthyridine derivatives as potential anti-Parkinson's agents.

1,8-Naphthyridine scaffold is a nitrogen-containing heterocyclic compound known for its versatile biological activities. The structure-activity relationship (SAR) has shown that modification at the 3rd position of the nucleus with various secondary amines enhances the binding efficiency and potency towards the Adenosine receptor (A2A type). In this paper, we have reported some newly synthesized derivatives of 1,8- Naphthyridine, and the prepared compounds were assessed for their potential to constrain A2A receptors through molecular docking. Based on the SAR studies, modifications were done at the 3rd position of the nucleus by incorporating secondary amines. The synthesized compounds were characterized by FT-IR, 1H and 13C NMR. All the synthesized compounds 10a-f and 13a-e showed good binding efficiency towards the A2A receptors and might act as an A2A receptor antagonist, as predicted by in-silico studies. 1-Ethyl-7-methyl-3-(pyrrolidine-1-carbonyl)-1,8-naphthyridine-4(1H)-one (10c) in first series showed the highest docking score of -8.407 and binding energy (MMGBSA dG bind) of -56.60 kcal/mol and N-(4-2-diethylaminoethoxyphenyl)-1-ethyl-7-methyl-4-oxo-1, 4, 4a, 8a- tetrahydro-1,8-naphthyridine-3-carboxamide (13b) showed the highest docking score of -8.562 and free binding energy (MMGBSA dG bind) score of -64.13 kcal/mol which was comparable to the bound ligand. MD simulations study also suggested that compounds 10c and 13b would form stable complex human A2A receptor. These findings need to be validated by further in vitro assays.Communicated by Ramaswamy H. Sarma.