Investigation into a Conformationally Locked (Z)-Azidoxime.

High nitrogen compounds find wide use in the development of new propellants and explosives as well as pharmaceutical chemistry as bioisosteres, bacterial stains, and antifungal agents. A class of underexplored high-nitrogen materials includes azidoximes and their 1-hydroxytetrazole isomers. Azidoximes possess an energetic azide group and are quite sensitive to impact, spark, and friction. Therefore, these materials are generated in situ and cyclized under mild acidic conditions to their 1-hydroxytetrazole isomers. Recently, we synthesized a novel 1,2,4-triazine-derived azidoxime; however, upon subjecting this material to established cyclization conditions, no reaction was observed, even after prolonged reaction times with heating. Additional 1,2,4-triazine-derived azidoximes also displayed a similar lack of reactivities. This observation led us to probe the reactivity of these materials with both a DFT investigation and crystallographically based electrostatic potential mapping. In all, the lack of reactivity toward cyclization was found to be due to an inability of 1,2,4-triazine-based azidoximes to isomerize into the reactive (E)-conformation, requiring an activation energy of 26.4 kcal mol-1.

Correlating Mechanical Sensitivity with Spin Transition in the Explosive Spin Crossover Complex [Fe(Htrz)3]n[ClO4]2n.

Spin crossover complexes are known to undergo bond length, volume, and enthalpy changes during spin transition. In an explosive spin crossover complex, these changes could affect the mechanical and initiation sensitivity of the explosive and lead to the development of a new class of sensitivity switchable materials. To explore this relationship, the well-known spin crossover compound [Fe(Htrz)3]n[ClO4]2n (1) was re-evaluated for its explosive properties, and its mechanical impact sensitivity was correlated to spin transition. A variable temperature impact test was developed and used to evaluate the impact sensitivity of 1 in the low spin (LS, S = 0), thermally accessed high spin (HS, S = 2), and mixed LS and HS states. For comparison, the structurally similar Ni compound, [Ni(Htrz)3]n[ClO4]2n (2), which does not undergo a spin transition at accessible temperatures, was synthesized and characterized, and its explosive properties and variable temperature impact sensitivity measured. These results reveal a correlation between impact sensitivity and spin transition, where 1 exhibits lower impact sensitivity in the LS state and increases in sensitivity upon transition to the HS state. Density functional theory was used to predict structural changes that occur upon spin transition that correlate to the change in sensitivity. This demonstrates, for the first time, an explosive spin crossover compound (ExSCO) that exhibits switchable impact sensitivity with a fully reversible internal switching mechanism.

Synthesis of Erythritol Tetranitrate Derivatives: Functional Group Tuning of Explosive Sensitivity.

Understanding the factors that affect explosive sensitivity is paramount to the safe handling and development of new explosives molecules. Erythritol tetranitrate (ETN) is an explosive that recently has attracted significant attention in the explosives community because of its ease of synthesis and physical properties. Herein, we report the synthesis of ETN derivatives using azide, nitramine, and nitrate ester functional groups. Impact, spark, and friction sensitivity measurements, computationally calculated explosive properties, and the crystal structure analysis of the ETN derivatives are reported. Mixing explosive functional groups led to changes in the explosive sensitivity, explosive performance as well as physical properties including melting point and physical state at room temperature. Overall, we have demonstrated that combining functional groups can enable the tuning of explosive and physical properties of a molecule. This tunability can potentially aid in the development of new explosives in which characteristics are varied to meet certain specifications.

Lanthanide Complexes of Bis(tetrazolato)amine: A Route to Lanthanide Nitride Foams.

Metal nitrides are strong refractory ceramic materials known for applications in the coatings, catalysis, and semiconductor industries. Lanthanide nitrides are difficult to prepare in high purity and often require high temperatures and sophisticated equipment. In this work, we present an approach to the synthesis of high-purity f-element nitrides through the use of simple lanthanide salts and the nitrogen-rich ligand 5,5'-bis(1H-tetrazolyl)amine (H2BTA) to form lanthanide complexes of 5,5'-bis(tetrazolato)amine (BTA2-). We have demonstrated that, when dehydrated, these types of complexes undergo a self-sustained combustion reaction under an inert atmosphere to yield nanostructured f-element nitride foams for lanthanum and cerium. The synthesis, characterization, and single-crystal X-ray crystallography of the BTA2- complexes of lanthanum, cerium, praseodymium, neodymium, and europium are also discussed.

Simple and Efficient Synthesis of Explosive Cocrystals containing 3,5-Dimethylpyrazol-1-yl-substituted-1,2,4,5-tetrazines.

The reaction of 3,4-dinitropyrazole, 5-nitrotetrazole, or 4-nitro-1,2,3-triazole with 1,2,4,5-tetrazines substituted with 3,5-dimethylpyrazolyl (dmp) groups results in energetic cocrystals after 1 minute of reflux and cooling to room temperature in yields of 89-92 %. Hydrogen-bonding between the dmp group to the N-H of the energetic heterocycles are the predominant interaction that stabilizes the new cocrystals. Each cocrystal packs in a different lattice structure and the cocrystals with sheet-like and herring-bone crystal packing orientations are less sensitive than the cocrystal with the interlocked structure. Electrostatic potential mapping helps rationalize why dmp-substituted tetrazines readily form cocrystals, whereas more electron-deficient pyrazolyl tetrazines do not. The calculated energetic performance of the new cocrystals approaches that of 2,4,6-trinitrotoluene (TNT) and importantly, these materials will aid in the rational design of new cocrystalline energetic materials.

Laser Initiation of Fe(II) Complexes of 4-Nitro-pyrazolyl Substituted Tetrazine Ligands.

The synthesis and characterization of new 1,2,4-triazolyl and 4-nitro-pyrazolyl substituted tetrazine ligands has been achieved. The strongly electron deficient 1,2,4-triazolyl substituted ligands did not coordinate Fe(II) metal centers, while the mildly electron deficient 4-nitro-pyrazolyl substituted ligands did coordinate Fe(II) metal centers in a 2:1 ratio of ligand to metal. The thermal stability and mechanical sensitivity characteristics of the complexes are similar to the conventional explosive pentaerythritol tetranitrate. The complexes had strong absorption in the visible region of the spectrum that extended into the near-infrared. In spite of having improved oxygen balances, increased mechanical sensitivity, and similar absorption of NIR light to recently reported Fe(II) tetrazine complexes, these newly synthesized explosives were more difficult to initiate with Nd:YAG pulsed laser light. Specifically, the complexes required lower densities (0.9 g/cm3) to initiate at the same threshold utilized to initiate previous materials at higher densities (1.05 g/cm3).

Cooperative enhancement of the nonlinear optical response in conjugated energetic materials: A TD-DFT study.

Conjugated energetic molecules (CEMs) are a class of explosives with high nitrogen content that posses both enhanced safety and energetic performance properties and are ideal for direct optical initiation. As isolated molecules, they absorb within the range of conventional lasers. Crystalline CEMs are used in practice, however, and their properties can differ due to intermolecular interaction. Herein, time-dependent density functional theory was used to investigate one-photon absorption (OPA) and two-photon absorption (TPA) of monomers and dimers obtained from experimentally determined crystal structures of CEMs. OPA scales linearly with the number of chromophore units, while TPA scales nonlinearly, where a more than 3-fold enhancement in peak intensity, per chromophore unit, is calculated. Cooperative enhancement depends on electronic delocalization spanning both chromophore units. An increase in sensitivity to nonlinear laser initiation makes these materials suitable for practical use. This is the first study predicting a cooperative enhancement of the nonlinear optical response in energetic materials composed of relatively small molecules. The proposed model quantum chemistry is validated by comparison to crystal structure geometries and the optical absorption of these materials dissolved in solution.

Azido and Tetrazolo 1,2,4,5-Tetrazine N-Oxides.

This study presents the synthesis and characterization of the oxidation products of 3,6-diazido-1,2,4,5-tetrazine (1) and 6-amino-[1,5-b]tetrazolo-1,2,4,5-tetrazine (2). 3,6-Diazido-1,2,4,5-tetrazine-1,4-dioxide was produced from oxidation with peroxytrifluoroacetic acid, and more effectively using hypofluorous acid, and 2 can be oxidized to two different products, 6-amino-[1,5-b]tetrazolo-1,2,4,5-tetrazine mono-N-oxide and di-N-oxide. These N-oxide compounds display promising performance properties as energetic materials.

Energetic Chromophores: Low-Energy Laser Initiation in Explosive Fe(II) Tetrazine Complexes.

The synthesis and characterization of air stable Fe(II) coordination complexes with tetrazine and triazolo-tetrazine ligands and perchlorate counteranions have been achieved. Time-dependent density functional theory (TD-DFT) was used to model the structural, electrochemical, and optical properties of these materials. These compounds are secondary explosives that can be initiated with Nd:YAG laser light at lower energy thresholds than those of PETN. Furthermore, these Fe(II) tetrazine complexes have significantly lower sensitivity than PETN toward mechanical stimuli such as impact and friction. The lower threshold for laser initiation was achieved by altering the electronic properties of the ligand scaffold to tune the metal ligand charge transfer (MLCT) bands of these materials from the visible into the near-infrared region of the electromagnetic spectrum. Unprecedented decrease in both the laser initiation threshold and the mechanical sensitivity makes these materials the first explosives that are both safer to handle and easier to initiate than PETN with NIR lasers.

Synthesis and Electrochemical Behavior of Electron-Rich s-Tetrazine and Triazolo-tetrazine Nitrate Esters.

We have prepared energetic nitrate ester derivatives of 1,2,4,5-tetrazine and 1,2,4-triazolo[4,3-b]-[1,2,4,5]-tetrazine ring systems as model compounds to study the electrochemical behavior of tetrazines in the presence of explosive groups. The model compounds showed lower thermal stabilities relative to PETN (pentaerythritol tetranitrate), but slightly improved mechanical sensitivities. The presence of electron-rich amine donors leads to a cathodic shift of the tetrazine redox potentials relative to those of previously reported tetrazine explosives. At these potentials, electron-rich tetrazines with either covalently bound or co-dissolved nitrate ester groups are irreversibly reduced. Effectively, changes in the electronic structure of tetrazines affect their electrochemical response to the presence of nitrate ester groups. Thus, it may be possible to develop tetrazine-based electrochemical sensors for the detection of specific explosives and electrocatalysts for their disposal.

Two-Photon Absorption in Conjugated Energetic Molecules.

Time-dependent density functional theory (TD-DFT) was used to investigate the relationship between molecular structure and the one- and two-photon absorption (OPA and TPA, respectively) properties of novel and recently synthesized conjugated energetic molecules (CEMs). The molecular structures of CEMs can be strategically altered to influence the heat of formation and oxygen balance, two factors that can contribute to the sensitivity and strength of an explosive material. OPA and TPA are sensitive to changes in molecular structure as well, influencing the optical range of excitation. We found calculated vertical excitation energies to be in good agreement with experiment for most molecules. Peak TPA intensities were found to be significant and on the order of 10(2) GM. Natural transition orbitals for essential electronic states defining TPA peaks of relatively large intensity were used to examine the character of relevant transitions. Modification of molecular substituents, such as additional oxygen or other functional groups, produces significant changes in electronic structure, OPA, and TPA and improves oxygen balance. The results show that certain molecules are apt to undergo nonlinear absorption, opening the possibility for controlled, direct optical initiation of CEMs through photochemical pathways.

Energetic Trinitro- and Fluorodinitroethyl Ethers of 1,2,4,5-Tetrazines.

Several new energetic ethyl ethers of 1,2,4,5-tetrazine have been synthesized. These molecules display good thermal stability, good oxygen balance, and high densities. Included in these studies are a 2,2,2-trinitroethoxy 1,2,4,5-tetrazine and two fluorodinitroethoxy 1,2,4,5-tetrazines. One of these compounds was converted into the di-N-oxide derivative. The sensitivity of these materials towards destructive stimuli was determined, and overall the materials show promising energetic performance properties.

An Energetic Triazolo-1,2,4-Triazine and its N-Oxide.

The reaction of 3-amino-5-nitro-1,2,4-triazole with nitrous acid produces the corresponding diazonium salt. When the diazonium salt is treated with nitroacetonitrile, a subsequent condensation and cyclization reaction occurres to produced 4-amino-3,7-dinitrotriazolo-[5,1-c][1,2,4] triazine (DPX-26). X-ray crystallographic analysis shows that the DPX-26 has a density of 1.86 g cm-3 , while it is calculated to have a heat of formation of 398.3 kJ mol-1 . DPX-26 is predicted to approach the explosive performance of RDX but displays significantly better safety properties. Oxidation of DPX-26 using hypofluorous acid produces 4-amino-3,7-dinitrotriazolo-[5,1-c][1,2,4] triazine 4-oxide (DPX-27), which is also predicted to be a high-performance material with enhanced safety properties.

Independent Control of Optical and Explosive Properties: Pyrazole-Tetrazine Complexes of First Row Transition Metals.

Complexes of 3-amino-6-(3,5-dimethylpyrazole)tetrazine) (NH2TzDMP, 1) and 3-(3,3'-dinitroazetidine)-6-(3,5-dimethylpyrazole)tetrazine) (DNAZTzDMP, 2) with first row transition metal centers were synthesized. Reactions of Fe(II)(H2O)6(BF4)2 and Fe(NO3)3·9H2O with 1 and 2 both led to complexes of the form [(RTzDMP)3Fe]X2 (X = BF4, R = NH2 (3), DNAZ (4); X = NO3, R = NH2 (5), DNAZ (6)), which showed intense MLCT bands in the visible region of the spectrum. Ligands 1 and 2 also reacted with Cu(II)(NO3)2·5/2H2O to form [(RTzDMP)2Cu(NO3)][NO3] (R = NH2 (7), DNAZ (8)) in addition to reacting with Cu(I)(CH3CN)4(PF6) to form [(RTzDMP)2Cu][PF6] (R = NH2 (9), DNAZ (10)). Lastly reactions of 1 and 2 with Co(NO3)2·6H2O and Ni(NO3)2·6H2O led to [(NH2TzDMP)2Co(H2O) (NO3)][NO3] (11), [(DNAZTzDMP)2Co(H2O)2][NO3]2 (12), [(NH2TzDMP)3Ni][NO3]2 (13), and [(DNAZTzDMP)2Ni(H2O)2][NO3]2 (14). The complexes display rich electrochemical and photophysical properties that are unaffected by derivation with explosive groups.

Synthesis and Thermal Behavior of a Fused, Tricyclic 1,2,3,4-Tetrazine Ring System.

This study presents the synthesis and characterization of a fused, tricyclic 1,2,3,4-tetrazine ring system. The molecule is synthesized in a three-step process from 5,5'-dinitro-bis,1,2,4-triazole via a di-N-amino compound. Oxidation to form the azo-coupled fused tricyclic 1,2,3,4-tetrazine is achieved using tert-butyl hypochlorite as the oxidant. The di-N-amino compound and the desired fused tricyclic 1,2,3,4-triazine display interesting thermal behavior and are predicted to be high-performance energetic materials.

2-Nitro-1,3-dinitro-oxypropane.

The title compound, C3H5N3O8, was synthesized by reacting 2-nitro-propane-1,3-diol with acetyl nitrate. The mol-ecule is bisected by a crystallograpic mirror plane. In the crystal, the mol-ecules pack in a ribbon-like fashion along the c axis, with the central nitro groups pointing in the same direction. C-H⋯O contacts apparently provide some additional packing stabilization.

Synthesis, Characterization, and Energetic Properties of Nitrate Ester Acrylate Polymer.

An energetic nitrate ester acrylate monomer (4) was synthesized in a total yield of 68% and polymerized to form the energetic nitrate ester acrylate polymer (NEAP). Compound 4 is a liquid at room temperature with a melting point of -8.6 °C and NEAP is a solid with a glass-transition temperature of -8.8 °C. Intermediates leading to 4 and NEAP were characterized by high-resolution mass spectrometry, elemental analysis, Fourier transform infrared spectroscopy, and proton and carbon nuclear magnetic resonance spectroscopies (1H and 13C{1H} NMR). Both 4 and NEAP have electrostatic discharge, friction, and impact sensitivities comparable to those of trinitrotoluene, making NEAP a potential candidate for advanced energetic formulations.

Synthesis and Energetic Properties of N-Substituted 3,4- and 3,5-Dinitropyrazoles.

3,4- and 3,5-Dinitropyrazoles (DNPs) were substituted with acryl and allyl groups on the N1 nitrogen atom, resulting in three novel energetic materials. These compounds are all liquids at room temperature with melting points ranging from -60.2 to -38.6 °C and were fully characterized by high-resolution mass spectrometry, elemental analysis, proton and carbon nuclear magnetic resonance spectroscopy, and Fourier transform infrared spectroscopy. These materials were also tested for electrostatic discharge, friction, and impact sensitivities and then compared to DNP starting materials and to the explosive nitroglycerin (NG). These results indicate that the synthesized compounds are less sensitive to impact compared to NG and have higher thermal stabilities to decomposition.

[3+2] click chemistry approach to tetrazine containing polymers.

We report a [3+2] cycloaddition using 3,6-bis-propargyloxy-1,2,4,5-tetrazine and azides to synthesize energetic polymers containing 1,2,4,5-tetrazine within the scaffold. This work also includes [3+2] cycloaddition to crosslink azide containing glycidyl azide polymer (GAP). These reactions provide pathways for incorporation of 1,2,4,5-tetrazine into novel energetic materials using click-chemistry and provide an alternative polymer curing approach.

Bis(Nitroxymethylisoxazolyl) Furoxan: A Promising Standalone Melt-Castable Explosive.

The synthesis and crystal structure of the heterocyclic explosive bis(nitroxymethylisoxazolyl) furoxan, C10 H6 N6 O10 , are described. In addition, we report its physical properties and theoretical performance. This material was found to exhibit standalone melt-castable explosive properties, with a melting point of 89.8 °C and an onset decomposition temperature of 193.8 °C. Bis(nitroxymethylisoxazolyl) furoxan features an insensitive behavior to impact, friction, and electrostatic discharge, with a calculated detonation pressure about 25 % higher than the state-of-the-art melt-castable explosive TNT.