RESUMO
Due to the weak longitudinal signals generated by laser ultrasound in the thermoelastic mechanism, the characteristic echoes are weak when evaluating the interior of solids, thus limiting its application to internal defect detection. A glass confinement layer is introduced to enhance the longitudinal excitation effectiveness. Specially, a thermoelastic model of laser ultrasound with a glass confinement is established to explain the mechanism of the enhancement of the longitudinal wave effectiveness, and the effect of the glass width on the longitudinal wave generated by the base ultrasound is investigated. The effect of the glass confinement layer on the enhancement of the effectiveness of the internal defects detection is studied. The simulation and experimental results show that the longitudinal waves with high signal-to-noise ratio induced from thermoelastic effect are excited similar to the ablation mechanism, which greatly improves the excitation efficiency of the longitudinal waves. The deep detection defects and the accurate localization of depth information are realized with an error of no more than 1.2%.
RESUMO
Two-phase nanolaminates are known for their high strength, yet they suffer from loss of ductility. Here, we show that broadening heterophase interfaces into "3D interfaces" as thick as the individual layers breaks this strength-ductility trade-off. In this work, we use micropillar compression and transmission electron microscopy to examine the processes underlying this breakthrough mechanical performance. The analysis shows that the 3D interfaces stifle flow instability via shear band formation through their interaction with dislocation pileups. To explain this observation, we use phase field dislocation dynamics (PFDD) simulations to study the interaction between a pileup and a 3D interface. Results show that when dislocation pileups fall below a characteristic size relative to the 3D interface thickness, transmission across interfaces becomes significantly frustrated. Our work demonstrates that 3D interfaces attenuate pileup-induced stress concentrations, preventing shear localization and offering an alternative way to enhanced mechanical performance.
RESUMO
Metal-organic framework (MOF) materials have shown promise in many applications, ranging from gas storage to absorption and catalysis. Because of the high porosity and low density of many MOFs, densification methods such as pelletization and extrusion are needed for practical use and for commercialization of MOF materials. Therefore, it is important to elucidate the mechanical properties of MOFs and to develop methods of further enhancing their mechanical strength. Here, we demonstrate the influence of phase purity and the presence of a pore-reinforcing component on elastic modulus and yield stress of NU-1000 MOFs through nanoindentation methods and finite element simulation. Three types of NU-1000 single crystals were compared: phase-pure NU-1000 prepared with biphenyl-4-carboxylic acid as a modulator (NU-1000-bip), NU-1000 prepared with benzoic acid as a modulator (NU-1000-ben), which results in an additional, denser impurity phase of NU-901, and NU-1000-bip whose mesopores were infiltrated with silica (SiOx(OH)y@NU-1000) by nanocasting methods. By maintaining phase purity and minimizing defects, the elastic modulus could be enhanced by nearly an order of magnitude: phase-pure NU-1000-bip crystals exhibited an elastic modulus of 21 GPa, whereas the value for NU-1000-ben crystals was only 3 GPa. The introduction of silica into the mesopores of NU-1000-bip did not strongly affect the measured elastic modulus (19 GPa) but significantly increased the load at failure from 2000 µN to 3000-4000 µN.
RESUMO
High-density growth nanotwins enable high-strength and good ductility in metallic materials. However, twinning propensity is greatly reduced in metals with high stacking fault energy. Here we adopted a hybrid technique coupled with template-directed heteroepitaxial growth method to fabricate single-crystal-like, nanotwinned (nt) Ni. The nt Ni primarily contains hierarchical twin structures that consist of coherent and incoherent twin boundary segments with few conventional grain boundaries. In situ compression studies show the nt Ni has a high flow strength of â¼2 GPa and good deformability. Moreover, the nt Ni has superb corrosion behavior due to the unique twin structure in comparison to coarse grained and nanocrystalline counterparts. The hybrid technique opens the door for the fabrication of a wide variety of single-crystal-like nt metals with unique mechanical and chemical properties.
RESUMO
A series of supermolecules of PW(x)V(12 - x)-MV (PW(x)V(12 - x): polyoxometalates x = 2, 4, 6, 8, 10; MV: methyl violet) with Keggin structure were prepared and their characters were studied by electronic spectra, infrared spectra and fluorescence spectra. As a result, the supermolecules were formed by the cooperating action between polyoxometalates and methyl violet. In the supermolecule, the structures of cation and anion are not destroyed. With the content of V increasing, the oxidation ability of polyoxometalates anion is enhanced, and the interaction of methyl violet cation and polyoxometalates anion is enhanced too. The FTIR absorption peaks of nu(as)(M=O(t)), nu(as)(M-O(b)-M) and nu(as)(M-O(c)-M) move from 966, 886, and 804 cm(-1) to 955, 875 and 786 cm(-1), respectively; the UV-Vis absorption peak moves from 519 to 506 nm; the emission peak excited at 530 nm moves from 692 to 644 nm too. These changes are according with the degree of the interaction of polyoxometalates and methyl violet.