Pre-Oxidation Strategy Transforming Waste Foam to Hard Carbon Anodes for Boosting Sodium Storage Performance.

Large reserves, high capacity, and low cost are the core competitiveness of disordered carbon materials as excellent anode materials for sodium-ion batteries (SIBs). And the existence and improper treatment of a large number of organic solid wastes will aggravate the burden on the environment, therefore, it is significant to transform wastes into carbon-based materials for sustainable energy utilization. Herein, a kind of hard carbon materials are reported with waste biomass-foam as the precursor, which can improve the sodium storage performance through pre-oxidation strategy. The introduction of oxygen-containing groups can promote structural cross-linking, and inhibit the melting and rearrangement of carbon structure during high-temperature carbonization that produces a disordered structure with a suitable degree of graphitization. Moreover, the micropore structure are also regulated during the high-temperature carbonization process, which is conducive to the storage of sodium ions in the low-voltage plateau region. The optimized sample as an electrode material exhibits excellent reversible specific capacity (308.0 mAh g-1) and initial Coulombic efficiency (ICE, 90.1%). In addition, a full cell with the waste foam-derived hard carbon anode and a Na3V2(PO4)3 cathode is constructed with high ICE and energy density. This work provides an effective strategy to conversion the waste to high-value hard carbon anode for sodium-ion batteries.

Influence of different stalks on the metallization degree of FeCl3-derived magnetic biochar through pyrolysis behavior and compositional differences.

To investigate the effect of stalk type on the metallization degrees in FeCl3-derived magnetic biochar (MBC), MBC was synthesized via an impregnation-pyrolysis method using six different stalks. The Fe0 content in MBC significantly influenced its magnetic properties and ostensibly governed its catalytic capabilities. Analysis of the interaction between stalks and FeCl3 revealed that the variation in metallization degrees, resulting from FeCl2 decomposition (6.1%) and stalk-mediated reduction (20.7%), was directly responsible for the observed differences in MBC metallization. The presence of oxygen-containing functional groups and fixed carbon appeared to promote metallization in MBC induced by reduction. A series of statistical analyses indicated that the cellulose, lignin, and hemicellulose content of the stalks were key factors contributing to differences in MBC metallization degrees. Further exploration revealed that hemicellulose and cellulose were more effective than lignin in enhancing metallization through FeCl2 decomposition and reduction. Constructing stalk models demonstrated that the variance in the content of these three biomass components across the six stalk types could lead to differences in the metallization degree attributable to reduction and FeCl2 decomposition, thereby affecting the overall metallization degree of MBC. A prediction model for MBC metallization degree was developed based on these findings. Moreover, the elevated Si content in some stalks facilitated the formation of Fe2(SiO4), which subsequently impeded the reduction process. This study provides a theoretical foundation for the informed selection of stalk feedstocks in the production of FeCl3-derived MBC.

Health risk assessment of dietary cadmium intake in children aged 2-17 years in East China.

Food is the main way for people to be exposed to heavy metal cadmium (Cd), and Cd pollution will affect human health. In this paper, exposure and health risk assessment of dietary Cd intake were conducted in children aged 2, 3, 4, 5, 6-8, 9-11, 12-14 and 15-17 years in East China. The results showed that the total exposure of dietary Cd intake in children exceeded the standard limits. The total exposure of all age groups were 1.11 × 10-3, 1.15 × 10-3, 9.67 × 10-4, 8.75 × 10-4, 9.18 × 10-4, 7.75 × 10-4, 8.24 × 10-4, 7.11 × 10-4 mg kg-1 d-1, respectively, and the highest was the children aged 3 years. The hazard quotients of children aged 2 and 3 years were 1.11 and 1.15, respectively, at an unacceptable health risk level. The hazard quotients of dietary Cd intake in children of other ages were less than 1, at an acceptable health risk level. Staple foods were the most significant contributor to the dietary Cd intake in children, and the contribution ratio of non-carcinogenic risk of dietary Cd intake in all age groups were more than 35%, the proportion of non-carcinogenic risk in children aged 6-8 and 9-11 years were as high as 50%. This study provides scientific basis for the health of children in East China.

Health risk study of cadmium, chromium, lead and arsenic in reservoir water of Changzhou, China.

Accurately assessing the health risks of human exposure to heavy metals via water is of great importance for performing targeted health risk prevention measures. To better understand the concentration characteristics and potential harm to human health of cadmium, chromium, lead and arsenic in the main drinking water-type reservoirs of Changzhou city, we collected samples from the Haidi Reservoir, Dongjin Reservoir, Xinfushan Reservoir, Maodong Reservoir and Xiangyang Reservoir of Changzhou in the summer of 2019. The results showed that the daily average comprehensive exposure level of metals was much lower than the provisional tolerated daily intake (PTDI), i.e., Cd: 1 µg kg-1 d-1; Cr: 3 µg kg-1 d-1; Pb: 3.57 µg kg-1 d-1; and As: 2.14 µg kg-1 d-1. The comprehensive non-carcinogenic risk levels of four metals under water-drinking exposure and water-skin exposure routes ranged from 4.68E - 3 to 1.69E - 1, and the carcinogenic risk ranged from 2.09E - 5 to 7.30E - 5, which were all at acceptable risk levels. Although lead and chromium were present at acceptable health risk levels, they still represented the main pollutants of potential health risk in the local water environment from a non-carcinogenic or carcinogenic perspective, and they should be listed as the primary targets for water environmental risk management.

Water softening by induced crystallization in fluidized bed.

Fluidized bed and induced crystallization technology were combined to design a new type of induced crystallization fluidized bed reactor. The added particulate matter served as crystal nucleus to induce crystallization so that the insoluble material, which was in a saturated state, could precipitate on its surface. In this study, by filling the fluidized bed with quartz sand and by adjusting water pH, precipitation of calcium carbonate was induced on the surface of quartz sand, and the removal of water hardness was achieved. With a reactor influent flow of 60L/hr, a fixed-bed height of 0.5m, pH value of 9.5, quartz sand nuclear diameter of 0.2-0.4mm, and a reflux ratio of 60%, the effluent concentration of calcium hardness was reduced to 60mg/L and 86.6% removal efficiency was achieved. The resulting effluent reached the quality standard set for circulating cooling water. Majority of the material on the surface of quartz sand was calculated to be calcium carbonate based on energy spectrum analysis and moisture content was around 15.994%. With the low moisture content, dewatering treatment is no longer required and this results to cost savings on total water treatment process.

Ecological ditch technology and development prospect based on nature-based solutions: a review.

The core of the concept of nature-based solutions (NBS) is ecological protection, which is the same direction as China's double-carbon goal and has attracted much attention in China. Ecological ditch sewage treatment technology has been widely used in controlling agricultural non-point source pollution because of its advantages of high pollutant removal efficiency and low energy consumption. Suppose the NBS concept of sustainable management, restoration, and ecological protection is integrated into the research and development and application of ecological ditch technology. In that case, it can not only improve the effective removal of pollutants, achieve the purpose of recycling water resources and nutrient elements, but also realize economic, environmental, and social benefits. This paper describes the ecosystem service functions provided by ecological ditches in detail, evaluates their economic values through literatures review, so as to raise people's awareness of natural resource conservation and realize the sustainable management of ecological ditches.

Advancing toxicity studies of per- and poly-fluoroalkyl substances (pfass) through machine learning: Models, mechanisms, and future directions.

Perfluorinated and perfluoroalkyl substances (PFASs), encompassing a vast array of isomeric chemicals, are recognized as typical emerging contaminants with direct or potential impacts on human health and the ecological environment. With the complex and elusive toxicological profiles of PFASs, machine learning (ML) has been increasingly employed in their toxicity studies due to its proficiency in prediction and data analytics. This integration is poised to become a predominant trend in environmental toxicology, propelled by the swift advancements in computational technology. This review diligently examines the literature to encapsulate the varied objectives of employing ML in the toxicity studies of PFASs: (1) Utilizing ML to establish Quantitative Structure-Activity Relationship (QSAR) models for PFASs with diverse toxicity endpoints, facilitating the targeted toxicity prediction of unidentified PFASs; (2) Investigating and substantiating the Adverse Outcome Pathway (AOP) through the synergy of ML and traditional toxicological methods, with this refining the toxicity assessment framework for PFASs; (3) Dissecting and elucidating the features of established ML models to advance Open Research into the toxicity of PFASs, with a primary focus on determinants and mechanisms. The discourse extends to an in-depth examination of ML studies, segregating findings based on their distinct application trajectories. Given that ML represents a nascent paradigm within PFASs research, this review delineates the collective challenges encountered in the ML-mediated study of PFAS toxicity and proffers strategic guidance for ensuing investigations.

Serial Circulating Tumor DNA in Monitoring the Effect of Neoadjuvant and Adjuvant Immunotherapy in Patients With Colon Cancer: Case Series and Review of the Literature.

Although programmed death 1 blockade has significantly improved the survival of advanced colorectal cancer patients with DNA mismatch repair-deficient (dMMR)/microsatellite instability-high (MSI-H), clinical data in neoadjuvant and adjuvant setting are limited. The role of circulating tumor DNA (ctDNA) in precision oncology is promising, but its clinical significance in immunotherapy needs to be validated. We report a case series of 3 colon patients who received neoadjuvant and adjuvant immunotherapy and serial ctDNA analysis. This report summarizes clinical and molecular details for 3 patients with locally advanced or recurrent dMMR/MSI-H/polymerase epsilon ( POLE ) mutation-positive tumors treated with neoadjuvant/adjuvant immunotherapy. One stage IV recurrent colon cancer patient diagnosed with Lynch syndrome received adjuvant sintilimab monotherapy and had a progression-free survival (PFS) over 16 months, one stage Ⅲc colon cancer patient with MSI-H/high tumor mutation burden received neoadjuvant toripalimab monotherapy, was assessed as clinical complete response before surgery, continued with adjuvant sintilimab monotherapy and had a PFS over 17 months, one stage Ⅱ colon cancer patient with POLE P286R also received adjuvant sintilimab monotherapy and had a PFS over 17 months. All patients had detectable ctDNA after radical surgery and clearance of ctDNA during adjuvant immunotherapy. All 3 patients are free of tumor disease at the time of this report. Further studies are warranted to evaluate the long-term efficacy of neoadjuvant and adjuvant programmed death 1 blockade in locally advanced and metastasis in dMMR/MSI-H/ POLE mutated colorectal cancer and the role of ctDNA monitoring.

Hyperthermic intraperitoneal chemotherapy following up-front cytoreductive surgery versus cytoreductive surgery alone for isolated synchronous colorectal peritoneal metastases: A retrospective, observational study.

Background: To date, the value of hyperthermic intraperitoneal chemotherapy (HIPEC) following up-front resection for isolated synchronous colorectal peritoneal metastases seems controversial. Patients and Methods: This retrospective cohort study was conducted from September 1, 2012, to September 1, 2019, at a tertiary medical center in China. Patients with isolated synchronous colorectal peritoneal metastases were included in CRS plus HIPEC group or CRS alone group based on the treatment history. Overall survival and relapse-free survival were estimated using Cox proportional hazards regression analysis and Kaplan-Meier method. Results: 78 patients with isolated synchronous colorectal peritoneal metastases were identified among 396 patients with synchronous colorectal peritoneal metastases. 43 were in the cytoreductive surgery plus HIPEC group and 35 were in the cytoreductive surgery alone group. Among them, 61 patients had relapse-free survival data. The median peritoneal cancer index was 4 in all patients. After a median follow-up of 46.0 months, 5-year overall survival was 66.8% and the median relapse-free survival was 36.0 (95% CI, 6.8-65.1) months in the CRS plus HIPEC group. 5-year overall survival was 31.2% and the median relapse-free survival was 12.0 (95% CI, 9.0-15.0) months in the CRS alone group. Cox regression analyses showed that HIPEC was the independent prognostic factor for overall survival (P = 0.004) and relapse-free survival (P = 0.049). Conclusion: Findings of the present study suggest that HIPEC following up-front CRS could improve overall survival and relapse-free survival in patients with isolated synchronous colorectal peritoneal metastases.

Architecting Braided Porous Carbon Fibers Based on High-Density Catalytic Crystal Planes to Achieve Highly Reversible Sodium-Ion Storage.

Carbonaceous materials are considered strong candidates as anode materials for sodium-ion batteries (SIBs), which are expected to play an indispensable role in the carbon-neutral era. Herein, novel braided porous carbon fibres (BPCFs) are prepared using the chemical vapour deposition (CVD) method. The BPCFs possess interwoven porous structures and abundant vacancies. The growth mechanism of the BPCFs can be attributed to the polycrystalline transformation of the nanoporous copper catalyst in the early stage of CVD process. Density functional theory calculations suggest that the Na+ adsorption energies of the mono-vacancy edges of the BPCFs (-1.22 and -1.09 eV) are lower than that of an ideal graphene layer (-0.68 eV), clarifying in detail the adsorption-dominated sodium storage mechanism. Hence, the BPCFs as an anode material present an outstanding discharge capacity of 401 mAh g-1 at 0.1 A g-1 after 500 cycles. Remarkably, this BPCFs anode, under high-mass-loading of 5 mg cm-2, shows excellent long-term cycling ability with a reversible capacity of 201 mAh g-1 at 10 A g-1 over 1000 cycles. This study provided a novel strategy for the development of high-performance carbonaceous materials for SIBs.

Health risk assessment of total exposure from cadmium in South China.

Heavy metal pollution and hazards are a global major concern. Heavy metals can be directly or indirectly harmful to humans through ingestion, inhalation, and deraml. According to the literature survey, cadmium (Cd) total exposure assessment and health risk assessment were performed in a population group from South China. Results showed that the Cd contents in PM2.5 and vegetables exceeded national standard limits. The same sources of Cd pollution contributed to different media; the main sources were artificial industrial activities such as electroplating, mining and smelting. The average daily dose of Cd via ingestion exceeded the provisional tolerable monthly intake proposed by the Joint Expert Committee on Food Additives (JECFA). Multimedia exposure via all three pathways followed the order 0-5-year-old children (3.26 × 10-3 mg kg-1·d-1)>6-17-year-old children (1.46 × 10-3 mg kg-1·d-1)>adults (1.18 × 10-3 mg kg-1·d-1). The exposure from point source pollution was quite different from the results for nonpoint sources. Ingestion was the exposure pathway that contributes the largest proportion of multipathway and multimedia total exposure, accounting for over 99% of the total exposure in different populations. Staple foods, vegetables and meat were the three main exposure media for ingestion. The hazard quotients of multipathway and multimedia exposure to Cd in different populations were 5.57, 2.87 and 2.26, respectively, all at unacceptable risk levels. This study highlights the importance of multipathway and multimedia in the health risk assessment of heavy metal exposure in South China, and provides risk management measures to reduce noncarcinogenic health risks.

Combined the Photocatalysis and Fenton-like Reaction to Efficiently Remove Sulfadiazine in Water Using g-C3N4/Ag/γ-FeOOH: Insights Into the Degradation Pathway From Density Functional Theory.

Sulfadiazine (SDZ) is a common antibiotic pollutant in wastewater. Given that it poses a risk as an environmental pollutant, finding effective ways to treat it is important. In this paper, the composite catalytic material g-C3N4/Ag/γ-FeOOH was prepared, and its degradation performance was studied. g-C3N4/Ag/γ-FeOOH had a superior degradation effect on SDZ than g-C3N4 and γ-FeOOH. Compared with different g-C3N4 loadings and different catalyst dosages (5, 10, 25, and 50 mg/L), 2 mg/L g-C3N4/Ag/γ-FeOOH with a g-C3N4 loading of 5.0 wt% has the highest degradation promotion rate for SDZ, reaching up to 258.75% at 600 min. In addition, the photocatalytic enhancement mechanism of the catalyst was studied. Density functional theory (DFT) calculations indicated that the enhancement of photocatalytic activity was related to the narrowing of the forbidden band and the local electron density of the valence band. The bandgap of the catalyst was gradually narrowed from 2.7 to 1.05 eV, which can increase the light absorption intensity and expand the absorption edge. The density of states diagram showed that the local resonance at the interface could effectively improve the separation efficiency of e--h+ pairs. Four degradation paths of SDZ were speculated based on DFT calculations. The analysis confirmed that the degradation path of SDZ primarily included Smiles-type rearrangement, SO2 extrusion, and S-N bond cleavage processes.

[Refined Assessment of Exposure and Health Risks of Heavy Metals in Water for the Children in Xigu District, Lanzhou].

Water is an important pathway for human exposure to heavy metals. Accurate assessment of the health risks that are related to exposure to heavy metals in drinking and household water are required for the preparation of targeted health risk prevention measures. This study explores and identifies the health risks related to exposure to heavy metals via drinking and household water pathways in Xigu District, Lanzhou, northwestern China, using household water samples and survey data obtained during July-September 2015 (wet season) and December 2015-January 2016 (dry season). During each period, drinking water and household water that were available for use by children aged 0-5 and 6-17 years were sampled and a questionnaire on water-related behavior patterns was completed for each household. Cd, Cr, Pb, and As concentrations were analyzed in all water samples, and were used along with water-related exposure factors from the questionnaires to estimate exposure doses and associated health risks using models recommended by the United States Environmental Protection Agency (US EPA). The results showed that the concentrations of Cd, Cr, Pb, and As in both drinking and household water samples did not exceed the relative thresholds defined in China's national water quality standards. The concentrations of heavy metals in household water were more affected by seasonal factors than of those of drinking water. The non-cancer and cancer risks were in the ranges of 2.82×10-8-2.43×10-2 and 7.55×10-9-3.62×10-5, respectively, which are within acceptable levels, although the non-cancer and cancer risks from drinking water were both higher than of those determined for household water. Furthermore, the non-cancer and cancer risks from household water for children aged 0-5 years were lower than of those for children aged 6-17 years in each period. However, the cancer risk from drinking water for children aged 0-5 years was lower than of that for children aged 6-17 years, whereas the reverse was found for non-cancer risks. This study indicates that Cd, Cr, Pb, and As in drinking and household water did not pose significant detrimental effects to human health, and that the refined exposure assessment used could reduce uncertainties in health risk assessments.

Hematite enhances the removal of Cr(VI) by Bacillus subtilis BSn5 from aquatic environment.

In the present study, we investigated the removal of Cr(VI) and the associated bacterial activity in the systems containing Bacillus subtilis BSn5 (B. subtilis BSn5) and hematite. The microcalorimetry was used to study the effect of hematite on the normal physiological functions of B. subtilis BSn5 towards the removal of Cr(VI) for the first time. The results of the heat flux and the sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) showed that hematite does not affect the normal physiological functions of B. subtilis BSn5, and can help the strains maintain their activity in the presence of Cr(VI). More importantly, the relative capacity and intensity of Cr(VI) and total Cr removal by B. subtilis BSn5 in the presence of hematite were higher than that in the absence of hematite. The enhancement effect could be associated with their mineral adsorption, biosorption, Fe(II) reduction, bioreduction and immobilization functions. This study demonstrates the possibility of reducing the toxicity of Cr(VI) and enhancing the Cr(VI) removal efficiency in contaminated environments using a combination of hematite and B. subtilis BSn5.

Fibronectin increases RhoA activity through inhibition of PKA in the human gastric cancer cell line SGC-7901.

Fibronectin/integrin-mediated signaling plays a key role in the regulation of adhesion, migration and metastasis of tumors. Numerous studies have addressed the significance of the association between integrin and RhoA, but the exact mechanism is unclear. Results from laboratories, including ours, have demonstrated that PKA inhibits the activity and function of RhoA. This study was designed to investigate the relationships among the fibronectin/integrin-, cAMP/PKA- and RhoA-mediated intracellular signal transduction pathways. Rho activity was detected by pull-down assay. cAMP concentration was measured by radioimmunoassay. The distribution of the PKA catalytic subunit and the phosphorylation of vasodilator-stimulated phosphoprotein (VASP) were detected by fluorescence microscopy and Western blotting, respectively, to examine the activation of PKA. cAMP-mediated gene expression activity was analyzed using a luciferase reporter gene assay. The results revealed that, in SGC-7901 cells, soluble fibronectin increased RhoA activity and blocked the inhibition of RhoA activity by cAMP/PKA. The cAMP level, which was increased by forskolin and pertussis toxin, was decreased by fibronectin. The nuclear location of the PKA catalytic unit, the phosphorylation of VASP and cAMP response element (CRE)-directed reporter gene expression induced by forskolin were blocked by fibronectin. However, fibronectin did not block VASP phosphorylation or CRE-directed reporter gene expression induced by cAMP. These data suggest that fibronectin/integrin induces RhoA activation through the inhibition of cAMP/PKA signal transduction. The possible point of action of fibronectin/integrin is adenylate cyclase.

[Optimization of acrylic fiber polymerization wastewater treatment condition by three-dimensional electrode].

The research was focus on the influence of experimental conditions to the removal efficiency of contaminant and the change of biodegradability in the treatment of acrylic fiber polymerization wastewater using three-dimensional electrode reactor with granular activated carbon. The anode was Ti/SnO2-Sb2O3 expanded metal sheet electrode. The cathode was Ti expanded metal sheet electrode. The parameters investigated were the reaction time, electrolytic voltage, initial pH value and aeration amount. The results show that the electrolytic voltage and initial pH value had greater impact on the removal efficiency of organic pollutants. Under the optimal experimental condition with electrolytic voltage 15 V, initial pH value 3, aeration amount 400 mL/min, the removal rates of COD, TOC and acrylonitrile were 32.59%, 22.17% and 89.70%, respectively,and the value of BOD5/COD increased from 0.02 to 0.42 within 120 min, which improved the biodegradability greatly and was beneficial for further biological treatment.