Bioceramics for Osteochondral Tissue Engineering and Regeneration.

Considerable advances in tissue engineering and regeneration have been accomplished over the last decade. Bioceramics have been developed to repair, reconstruct, and substitute diseased parts of the body and to promote tissue healing as an alternative to metallic implants. Applications embrace hip, knee, and ligament repair and replacement, maxillofacial reconstruction and augmentation, spinal fusion, bone filler, and repair of periodontal diseases. Bioceramics are well-known for their superior wear resistance, high stiffness, resistance to oxidation, and low coefficient of friction. These specially designed biomaterials are grouped in natural bioceramics (e.g., coral-derived apatites), and synthetic bioceramics, namely bioinert ceramics (e.g., alumina and zirconia), bioactive glasses and glass ceramics, and bioresorbable calcium phosphates-based materials. Physicochemical, mechanical, and biological properties, as well as bioceramics applications in diverse fields of tissue engineering are presented herein. Ongoing clinical trials using bioceramics in osteochondral tissue are also considered. Based on the stringent requirements for clinical applications, prospects for the development of advanced functional bioceramics for tissue engineering are highlighted for the future.

Hydroxyapatite/alginate/gellan gum inks with osteoconduction and osteogenic potential for bioprinting bone tissue analogues.

There is a growing demand for engineered bone tissues custom-designed to match the patient-specific defect size and in vitro models for studying bone diseases and/or drug screening. Herein, we propose a bioprinted bone tissue construct using SaOs-2 cells within alginate/gellan gum/hydroxyapatite inks. Different ink formulations were developed with varying hydroxyapatite content and then evaluated for viscoelasticity, printability, biomineralization properties, post-printing viability, proliferation, metabolic activity, and osteogenic phenotype of SaOs-2-encapsulated cells. Results indicate that ink formulations exhibit non-Newtonian shear-thinning behaviour, maintaining shape integrity and structural stability post-printing. Ink mineralization rates increase with the hydroxyapatite content, rendering them suitable for bone defect strategies. Post-printed cells in the developed constructs remain live, spreading, and metabolically active but do not proliferate. Osteogenic gene and protein expression, both early and late, show upregulation at day 7 relative to day 1, followed by downregulation at day 14. Lower hydroxyapatite content inks demonstrate up to fourfold upregulation in genes and proteins at most time points. Additionally, these constructs release calcium and phosphate at levels conducive to mineralization. Overall, the tissue-engineered miniaturized constructs not only meet the criteria for early-stage bone defect/fracture regeneration but also serve as a promising platform for drug screening and evaluating potential therapeutic treatments.

Influence of gellan gum-hydroxyapatite spongy-like hydrogels on human osteoblasts under long-term osteogenic differentiation conditions.

The scientific community has been doing significant efforts towards engineering new 3D bone models in recent years. Osteocytes are mechanosensitive cells that play significant roles in the maintenance of bone homeostasis. Currently, as far as we know, there are no 3D models that faithfully recapitulate a bone microenvironment capable of promoting the differentiation of osteoblasts towards osteocytes. Besides, in the existing models, the use of human cells does not prevail over the animal cell lines. For so, we propose a 3D model that may have important implications for ongoing efforts towards a better understanding of bone physiology and disease. The main aim of the current work was the promotion of an effective differentiation of osteoblasts into osteocytes by mean of using a 3D model composed of primary human osteoblasts (hOBs) cultured on Gellan Gum-Hydroxyapatite (GG-HAp) matrix under a long-term osteogenic culture. The results revealed that GG-HAp matrix stimulated a fast cell migration/entrapment, attachment, spreading, and mineralization. Moreover, the transition process from osteoblasts to osteocytes was confirmed by the expression of the osteogenic-related (ALP, Runx2, COL I, OC, OPN and OSX) and osteocyte-related (hPDPN) marker throughout the culture time. Overall, the developed 3D model holds a great promise for the treatment of various bone diseases, namely on diagnostic applications and for bone regeneration purposes.

Could 3D models of cancer enhance drug screening?

Cancer is a multifaceted pathology, where cellular and acellular players interact to drive cancer progression and, in the worst-case, metastasis. The current methods to investigate the heterogeneous nature of cancer are inadequate, since they rely on 2D cell cultures and animal models. The cell line-based drug efficacy and toxicity assays are not able to predict the tumor response to anti-cancer agents and it is already widely discussed how molecular pathway are not recapitulated in vitro so called flat biology. On the other side, animal models often fail to detect the side-effects of drugs, mimic the metastatic progression or the interaction between cancer and immune system, due to biologic difference in human and animals. Moreover, ethical and regulatory issues limit animal experimentation. Every year pharma/biotech companies lose resources in drug discovery and testing processes that are successful only in 5% of the cases. There is an urgent need to validate accurate and predictive platforms in order to enhance drug-testing process taking into account the physiopathology of the tumor microenvironment. Three dimensional in vitro tumor models could enhance drug manufactures in developing effective drugs for cancer diseases. The 3D in vitro cancer models can improve the predictability of toxicity and drug sensitivity in cancer. Despite the demonstrated advantages of 3D in vitro disease systems when compared to 2D culture and animal models, they still do not reach the standardization required for preclinical trials. This review highlights in vitro models that may be used as preclinical models, accelerating the drug development process towards more precise and personalized standard of care for cancer patients. We describe the state-of-the art of 3D in vitro culture systems, with a focus on how these different approaches could be coupled in order to achieve a compromise between standardization and reliability in recapitulating tumor microenvironment and drug response.

Stem Cell-Containing Hyaluronic Acid-Based Spongy Hydrogels for Integrated Diabetic Wound Healing.

The detailed pathophysiology of diabetic foot ulcers is yet to be established and improved treatments are still required. We propose a strategy that directs inflammation, neovascularization, and neoinnervation of diabetic wounds. Aiming to potentiate a relevant secretome for nerve regeneration, stem cells were precultured in hyaluronic acid-based spongy hydrogels under neurogenic/standard media before transplantation into diabetic mice full-thickness wounds. Acellular spongy hydrogels and empty wounds were used as controls. Re-epithelialization was attained 4 weeks after transplantation independently of the test groups, whereas a thicker and more differentiated epidermis was observed for the cellular spongy hydrogels. A switch from the inflammatory to the proliferative phase of wound healing was revealed for all the experimental groups 2 weeks after injury, but a significantly higher M2(CD163+)/M1(CD86+) subtype ratio was observed in the neurogenic preconditioned group that also failed to promote neoinnervation. A higher number of intraepidermal nerve fibers were observed for the unconditioned group probably due to a more controlled transition from the inflammatory to the proliferative phase. Overall, stem cell-containing spongy hydrogels represent a promising approach to enhance diabetic wound healing by positively impacting re-epithelialization and by modulating the inflammatory response to promote a successful neoinnervation.

Gellan gum-hyaluronic acid spongy-like hydrogels and cells from adipose tissue synergize promoting neoskin vascularization.

Currently available substitutes for skin wound healing often result in the formation of nonfunctional neotissue. Thus, urgent care is still needed to promote an effective and complete regeneration. To meet this need, we proposed the assembling of a construct that takes advantage of cell-adhesive gellan gum-hyaluronic acid (GG-HA) spongy-like hydrogels and a powerful cell-machinery obtained from adipose tissue, human adipose stem cells (hASCs), and microvascular endothelial cells (hAMECs). In addition to a cell-adhesive character, GG-HA spongy-like hydrogels overpass limitations of traditional hydrogels, such as reduced physical stability and limited manipulation, due to improved microstructural arrangement characterized by pore wall thickening and increased mean pore size. The proposed constructs combining cellular mediators of the healing process within the spongy-like hydrogels that intend to recapitulate skin matrix aim to promote neoskin vascularization. Stable and off-the-shelf dried GG-HA polymeric networks, rapidly rehydrated at the time of cell seeding then depicting features of both sponges and hydrogels, enabled the natural cell entrapment/encapsulation and attachment supported by cell-polymer interactions. Upon transplantation into mice full-thickness excisional wounds, GG-HA spongy-like hydrogels absorbed the early inflammatory cell infiltrate and led to the formation of a dense granulation tissue. Consequently, spongy-like hydrogel degradation was observed, and progressive wound closure, re-epithelialization, and matrix remodelling was improved in relation to the control condition. More importantly, GG-HA spongy-like hydrogels promoted a superior neovascularization, which was enhanced in the presence of human hAMECs, also found in the formed neovessels. These observations highlight the successful integration of a valuable matrix and prevascularization cues to target angiogenesis/neovascularization in skin full-thickness excisional wounds.

Human serum is a suitable supplement for the osteogenic differentiation of human adipose-derived stem cells seeded on poly-3-hydroxibutyrate-co-3-hydroxyvalerate scaffolds.

Human adipose-derived stem cells (hASCs) are currently a point of focus for bone tissue engineering applications. However, the ex vivo expansion of stem cells before clinical application remains a challenge. Fetal bovine serum (FBS) is largely used as a medium supplement and exposes the recipient to infections and immunological reactions. In this study, we evaluated the osteogenic differentiation process of hASCs in poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHB-HV) scaffolds with the osteogenic medium supplemented with pooled allogeneic human serum (aHS). The hASCs grown in the presence of FBS or aHS did not show remarkable differences in morphology or immunophenotype. The PHB-HV scaffolds, which were developed by the freeze-drying technique, showed an adequate porous structure and mechanical performance as observed by micro-computed tomography, scanning electron microscopy (SEM), and compression test. The three-dimensional structure was suitable for allowing cell colonization, which was revealed by SEM micrographs. Moreover, these scaffolds were not toxic to cells as shown by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The differentiation capacity of hASCs seeded on scaffolds was confirmed by the reduction of the proliferation, the alkaline phosphatase (AP) activity, expression of osteogenic gene markers (AP, collagen type I, Runx2, and osteocalcin), and the expression of bone markers, such as osteopontin, osteocalcin, and collagen type I. The osteogenic capacity of hASCs seeded on PHB-HV scaffolds indicates that this scaffold is adequate for cell growth and differentiation and that aHS is a promising supplement for the in vitro expansion of hASCs. In conclusion, this strategy seems to be useful and safe for application in bone tissue engineering.

Adhesion, proliferation, and osteogenic differentiation of a mouse mesenchymal stem cell line (BMC9) seeded on novel melt-based chitosan/polyester 3D porous scaffolds.

The aim of the present work was to study the biological behavior of a mouse mesenchymal stem cell line when seeded and cultured under osteogenic conditions onto novel processed melt-based chitosan scaffolds. Scaffolds were produced by compression molding, followed by salt leaching. Scanning electron microscopy (SEM) observations and microCT analysis showed the pore sizes ranging between 250 and 500 microm and the interconnectivity of the porous structure. The chitosan-poly(butylenes succinate) scaffolds presented high mechanical properties, similar to the ones of trabecular bone (E1% approximately 75 MPa). Cytotoxicity assays were carried out using standard tests (accordingly to ISO/EN 10993 part 5 guidelines), namely, MTS test with a 24 h extraction period, revealing that L929 cells had similar metabolic activities to that obtained for the negative control. Cell culture studies were conducted using a mouse mesenchymal stem cell line (BMC9). Cells were seeded onto the scaffold and allowed to proliferate for 3 weeks under osteogenic conditions. SEM observations demonstrated that cells were able to proliferate and massively colonize the scaffolds structure. The cell viability assay MTS demonstrated that BMC9 cells were viable after 3 weeks of culture. The cells clearly evidenced a positive differentiation toward the osteogenic lineage, as confirmed by the high ALP activity levels. Moreover, energy dispersive spectroscopy (EDS) analysis revealed the presence of Ca and P in the elaborated extracellular matrix (ECM). These combined results indicate that the novel melt-based chitosan/polyester scaffolds support the adhesion, proliferation, and osteogenic differentiation of the mouse MSCs and shows adequate physicochemical and biological properties for being used as scaffolds in bone tissue engineering-related strategies.