In vitro temporal HIF-mediated deposition of osteochondrogenic matrix governed by hypoxia and osteogenic factors synergy.

Musculoskeletal interfaces are naturally hypoxic. An understanding of key interactions occurring between different cell populations and their environment is critical for native tissue recapitulation. Here, an enthesis coculture model (preosteoblasts and tendon cells) was used to understand the influence of hypoxia (5% O2 ) and osteogenic medium (OM) supplementation in cells' phenotype modulation. In single cultures, preosteoblasts were found to undergo osteogenic impairment, while tendon cells underwent a maturation process through extracellular matrix (ECM) rescue. When in co-culture, hypoxia and osteoinduction promoted a temporal chondro/osteogenic pathway activation, as observed by an early deposition of cartilaginous ECM associated with HIF1A stabilization and RUNX2 activation, and later hypertrophic differentiation resulting from HIF2A translocation and SOX9 activation. Moreover, the presence of OM under hypoxia was shown to influence the extracellular ROS/HIF1A interplay. Overall, this study revealed a link between biochemical factors and cell-cell crosstalk, providing a molecular framework for hypoxic control and modulation of cells' fate toward enthesis-like phenotypes.

Cellular Complexity at the Interface: Challenges in Enthesis Tissue Engineering.

The complex heterogeneous cellular environment found in tendon-to-bone interface makes this structure a challenge for interface tissue engineering. Orthopedic surgeons still face some problems associated with the formation of fibrotic tissue or re-tear occurring after surgical re-attachment of tendons to the bony insertion or the application of grafts. Unfortunately, an understanding of the cellular component of enthesis lags far behind of other well-known musculoskeletal interfaces, which blocks the development of new treatment options for the healing and regeneration of this multifaceted junction. In this chapter, the main characteristics of tendon and bone cell populations are introduced, followed by a brief description of the interfacial cellular niche, highlighting molecular mechanisms governing tendon-to-bone attachment and mineralization. Finally, we describe and critically assess some challenges faced concerning the use of cell-based strategies in tendon-to-bone healing and regeneration.

Mesenchymal Stem Cells Empowering Tendon Regenerative Therapies.

Tendon tissues have limited healing capacity. The incidence of tendon injuries and the unsatisfactory functional outcomes of tendon repair are driving the search for alternative therapeutic approaches envisioning tendon regeneration. Cellular therapies aim at delivering adequate, regeneration-competent cell types to the injured tendon and toward ultimately promoting its reconstruction and recovery of functionality. Mesenchymal stem cells (MSCs) either obtained from tendons or from non-tendon sources, like bone marrow (BM-MSCs) or adipose tissue (ASCs), have been receiving increasing attention over the years toward enhancing tendon healing. Evidences from in vitro and in vivo studies suggest MSCs can contribute to accelerate and improve the quality of tendon healing. Nonetheless, the exact mechanisms underlying these repair events are yet to be fully elucidated. This review provides an overview of the main challenges in the field of cell-based regenerative therapies, discussing the role of MSCs in boosting tendon regeneration, particularly through their capacity to enhance the tenogenic properties of tendon resident cells.

Crosstalk between adipose stem cells and tendon cells reveals a temporal regulation of tenogenesis by matrix deposition and remodeling.

Tendon injuries constitute an unmet clinical challenge owing to the limited intrinsic regenerative ability of this tissue. Cell-based therapies aim at improving tendon healing through the delicate orchestration of tissue rebuilding and regain of function. Hence, human adipose-derived stem cells (hASCs) have been proposed as a promising cell source for boosting tendon regeneration. In this work, we investigated the influence of hASCs on native human tendon-derived cells (hTDCs) through the establishment of a direct contact co-culture system. Results demonstrated that direct interactions between these cell types resulted in controlled proliferation and spontaneous cell elongation. ECM-related genes, particularly COL1A1 and TNC, and genes involved in ECM remodeling, such as MMP1, MMP2, MMP3, and TIMP1, were expressed in co-culture in a temporally regulated manner. In addition, deposition of collagen type I was accelerated in co-culture systems and favored over the production of collagen type III, resulting in an enhanced COL1/COL3 ratio as soon as 7 days. In conclusion, hASCs seem to be good candidates in modulating the behavior of native tendon cells, particularly through a balanced process of ECM synthesis and degradation.

Magnetotherapy: The quest for tendon regeneration.

Tendons are mechanosensitive tissues that connect and transmit the forces generated by muscles to bones by allowing the conversion of mechanical input into biochemical signals. These physical forces perform the fundamental work of preserving tendon homeostasis assuring body movements. However, overloading causes tissue injuries, which leads us to the field of tendon regeneration. Recently published reviews have broadly shown the use of biomaterials and different strategies to attain tendon regeneration. In this review, our focus is the use of magnetic fields as an alternative therapy, which has demonstrated clinical relevance in tendon medicine because of their ability to modulate cell fate. Yet the underlying cellular and molecular mechanisms still need to be elucidated. While providing a brief outlook about specific signalling pathways and intracellular messengers as framework in play by tendon cells, application of magnetic fields as a subcategory of physical forces is explored, opening up a compelling avenue to enhance tendon regeneration. We outline here useful insights on the effects of magnetic fields both at in vitro and in vivo levels, particularly on the expression of tendon genes and inflammatory cytokines, ultimately involved in tendon regeneration. Subsequently, the potential of using magnetically responsive biomaterials in tendon tissue engineering is highlighted and future directions in magnetotherapy are discussed.

Tendon explant cultures to study the communication between adipose stem cells and native tendon niche.

Poor clinical outcomes of tendon repair, together with limited regenerative capacity of the tissue, have triggered the search for alternative regenerative medicine strategies. Human adipose-derived stem cells (hASCs) are being investigated as a promising cell source in contributing for tendon repopulation and reconstruction. However, the mechanisms involved in a potential beneficial effect in tendon regeneration are still to be uncovered. To gain further insights on the bi-directional crosstalk occurring between stem cells and the native tendon niche, it was used an indirect (trans-well) system for co-culturing human tendon explants and hASCs. The maintenance of tissue architecture was studied up to 14 days by histological techniques. The secretion of MMPs was evaluated at day 3. The behavior of hASCs was assessed regarding cell elongation and extracellular matrix (ECM) production. The paracrine communication enhanced collagenolytic activity of MMPs in co-cultures at day 3, in comparison to hASCs alone or tendon explants alone, suggesting that ECM remodeling is triggered early in culture. Moreover, hASCs were spontaneously more elongated in co-cultures and the deposition of collagen type III and tenascin-C by hASCs in co-culture was observed at a lower extent after 7 days, in comparison to hASCs alone, being lately recovered at day 14. Overall, explant co-cultures established herein may constitute a tool for replicating the first steps in tendon healing and help uncovering the bi-directional communication occurring between hASCs and the native tendon niche.

Multifunctional magnetic-responsive hydrogels to engineer tendon-to-bone interface.

Photocrosslinkable magnetic hydrogels are attracting great interest for tissue engineering strategies due to their versatility and multifunctionality, including their remote controllability ex vivo, thus enabling engineering complex tissue interfaces. This study reports the development of a photocrosslinkable magnetic responsive hydrogel made of methacrylated chondroitin sulfate (MA-CS) enriched with platelet lysate (PL) with tunable features, envisioning their application in tendon-to-bone interface. MA-CS coated iron-based magnetic nanoparticles were incorporated to provide magnetic responsiveness to the hydrogel. Osteogenically differentiated adipose-derived stem cells and/or tendon-derived cells were encapsulated within the hydrogel, proliferating and expressing bone- and tendon-related markers. External magnetic field (EMF) application modulated the swelling, degradation and release of PL-derived growth factors, and impacted both cell morphology and the expression and synthesis of tendon- and bone-like matrix with a more evident effect in co-cultures. Overall, the developed magnetic responsive hydrogel represents a potential cell carrier system for interfacial tissue engineering with EMF-controlled properties.

3D Mimicry of Native-Tissue-Fiber Architecture Guides Tendon-Derived Cells and Adipose Stem Cells into Artificial Tendon Constructs.

Tendon and ligament (T/L) function is intrinsically related with their unique hierarchically and anisotropically organized extracellular matrix. Their natural healing capacity is, however, limited. Here, continuous and aligned electrospun nanofiber threads (CANT) based on synthetic/natural polymer blends mechanically reinforced with cellulose nanocrystals are produced to replicate the nanoscale collagen fibrils grouped into microscale collagen fibers that compose the native T/L. CANT are then incrementally assembled into 3D hierarchical scaffolds, resulting in woven constructions, which simultaneously mimic T/L nano-to-macro architecture, nanotopography, and nonlinear biomechanical behavior. Biological performance is assessed using human-tendon-derived cells (hTDCs) and human adipose stem cells (hASCs). Scaffolds nanotopography and microstructure induce a high cytoskeleton elongation and anisotropic organization typical of tendon tissues. Moreover, the expression of tendon-related markers (Collagen types I and III, Tenascin-C, and Scleraxis) by both cell types, and the similarities observed on their expression patterns over time suggest that the developed scaffolds not only prevent the phenotypic drift of hTDCs, but also trigger tenogenic differentiation of hASCs. Overall, these results demonstrate a feasible approach for the scalable production of 3D hierarchical scaffolds that exhibit key structural and biomechanical properties, which can be advantageously explored in acellular and cellular T/L TE strategies.

Monocarboxylate transporter 1 is a key player in glioma-endothelial cell crosstalk.

Glioblastoma (GBM) is one of the most glycolytic and angiogenic human tumors, characteristics that contribute to the poor prognosis associated with this type of tumor. A lactate shuttle has been described between tumor cells and endothelial cells (ECs), with the monocarboxylate transporters (MCTs) acting as important players in this tumor-EC communication. In this study, we aimed to understand how the tumor microenvironment modulates EC metabolism, and to characterize the role of MCTs in the glioma-brain EC crosstalk. Exposure of human brain microvascular ECs (HBMEC) to GBM cell-conditioned media increased the expression of MCT1, which corresponded to activation of oxidative metabolism and an increase in angiogenic capacity, as determined by increased proliferation, migration, and vessel assembly. Lactate depletion from the microenvironment or inhibition of lactate uptake in HBMEC induced an increase in lactate production and a decrease in proliferation, migration, and vessel assembly. Moreover, addition of lactate to HBMEC media promoted activation of AKT and AMPK pathways and increased expression in NFκB, HIF-1α, and the lactate receptor GPR81. Here, we demonstrate a role for MCT1 as a mediator of lactate signaling between glioma cells and brain ECs. Our results suggest that MCT1 can mediate EC metabolic reprograming, proliferation, and vessel sprouting in response to tumor signaling. Thus, targeting MCT1 in both tumor cells and brain EC may be a promising therapeutic strategy for the treatment of GBM.

Pharmaceutical Formulations Containing Graphene and 5-Fluorouracil for Light-Emitting Diode-Based Photochemotherapy of Skin Cancer.

Nonmelanoma skin cancer (NMSC) is the most common cancer worldwide, among which 80% is basal cell carcinoma (BCC). Current therapies' low efficacy, side effects, and high recurrence highlight the need for alternative treatments. In this work, a partially reduced nanographene oxide (p-rGOn) developed in our laboratory was used. It has been achieved through a controlled reduction of nanographene oxide via UV-C irradiation that yields small nanometric particles (below 200 nm) that preserve the original water stability while acquiring high light-to-heat conversion efficiency. The latter is explained by a loss of carbon-oxygen single bonds (C-O) and the re-establishment of sp2 carbon bonds. p-rGOn was incorporated into a Carbopol hydrogel together with the anticancer drug 5-fluorouracil (5-FU) to evaluate a possible combined PTT and chemotherapeutic effect. Carbopol/p-rGOn/5-FU hydrogels were considered noncytotoxic toward normal skin cells (HFF-1). However, when A-431 skin cancer cells were exposed to NIR irradiation for 30 min in the presence of Carbopol/p-rGOn/5-FU hydrogels, almost complete eradication was achieved after 72 h, with a 90% reduction in cell number and 80% cell death of the remaining cells after a single treatment. NIR irradiation was performed with a light-emitting diode (LED) system, developed in our laboratory, which allows adjustment of applied light doses to achieve a safe and selective treatment, instead of the standard laser systems that are associated with damages in the healthy tissues in the tumor surroundings. Those are the first graphene-based materials containing pharmaceutical formulations developed for BCC phototherapy.

Fabrication of Polymer/Graphene Biocomposites for Tissue Engineering.

Graphene-based materials (GBM) are considered one of the 21st century's most promising materials, as they are incredibly light, strong, thin and have remarkable electrical and thermal properties. As a result, over the past decade, their combination with a diverse range of synthetic polymers has been explored in tissue engineering (TE) and regenerative medicine (RM). In addition, a wide range of methods for fabricating polymer/GBM scaffolds have been reported. This review provides an overview of the most recent advances in polymer/GBM composite development and fabrication, focusing on methods such as electrospinning and additive manufacturing (AM). As a future outlook, this work stresses the need for more in vivo studies to validate polymer/GBM composite scaffolds for TE applications, and gives insight on their fabrication by state-of-the-art processing technologies.

High-Yield Production of Nano-Lateral Size Graphene Oxide by High-Power Ultrasonication.

Nanographene oxide (GOn) constitutes a nanomaterial of high value in the biomedical field. However, large scale production of highly stable aqueous dispersions of GOn is yet to be achieved. In this work, we explored high-power ultrasonication as a method to reduce particle size of GO and characterized the impact of the process on the physicochemical properties of the material. GOn was obtained with lateral dimensions of 99 ± 43 nm and surface charge of -39.9 ± 2.2 mV. High-power ultrasonication enabled an improvement of stability features, particularly by resulting in a decrease of the average particle size, as well as zeta potential, in comparison to GO obtained by low-power exfoliation and centrifugation (287 ± 139 nm; -29.7 ± 1.2 mV). Remarkably, GOn aqueous dispersions were stable for up to 6 months of shelf-time, with a global process yield of 74%. This novel method enabled the production of large volumes of highly concentrated (7.5 mg mL-1) GOn aqueous dispersions. Chemical characterization of GOn allowed the identification of characteristic oxygen functional groups, supporting high-power ultrasonication as a fast, efficient, and productive process for reducing GO lateral size, while maintaining the material's chemical features.

Graphene Oxide Topical Administration: Skin Permeability Studies.

Nanostructured carriers have been widely used in pharmaceutical formulations for dermatological treatment. They offer targeted drug delivery, sustained release, improved biostability, and low toxicity, usually presenting advantages over conventional formulations. Due to its large surface area, small size and photothermal properties, graphene oxide (GO) has the potential to be used for such applications. Nanographene oxide (GOn) presented average sizes of 197.6 ± 11.8 nm, and a surface charge of -39.4 ± 1.8 mV, being stable in water for over 6 months. 55.5% of the mass of GOn dispersion (at a concentration of 1000 µg mL-1) permeated the skin after 6 h of exposure. GOn dispersions have been shown to absorb near-infrared radiation, reaching temperatures up to 45.7 °C, within mild the photothermal therapy temperature range. Furthermore, GOn in amounts superior to those which could permeate the skin were shown not to affect human skin fibroblasts (HFF-1) morphology or viability, after 24 h of incubation. Due to its large size, no skin permeation was observed for graphite particles in aqueous dispersions stabilized with Pluronic P-123 (Gt-P-123). Altogether, for the first time, Gon's potential as a topic administration agent and for delivery of photothermal therapy has been demonstrated.

A Physiology-Inspired Multifactorial Toolbox in Soft-to-Hard Musculoskeletal Interface Tissue Engineering.

Musculoskeletal diseases are increasing the prevalence of physical disability worldwide. Within the body, musculoskeletal soft and hard tissues integrate through specific multitissue transitions, allowing for body movements. Owing to their unique compositional and structural gradients, injuries challenge the native interfaces and tissue regeneration is unlikely to occur. Tissue engineering strategies are emerging to emulate the physiological environment of soft-to-hard tissue interfaces. Advances in biomaterial design enable control over biophysical parameters, but biomaterials alone are not sufficient to provide adequate support and guide transplanted cells. Therefore, biological, biophysical, and biochemical tools can be integrated into a multifactorial toolbox, steering prospective advances toward engineering clinically relevant soft-to-hard tissue interfaces.

Platelet-rich Blood Derivatives for Tendon Regeneration.

Tendon injuries constitute a significant healthcare problem with variable clinical outcomes. The complex interplay of tissue homeostasis, degeneration, repair, and regeneration makes the development of successful delivery therapeutic strategies challenging. Platelet-rich hemoderivatives, a source of supra-physiologic concentrations of human therapeutic factors, are a promising application to treat tendon injuries from the perspective of tendon tissue engineering, although the outcomes remain controversial.

Near-Infrared Radiation-Based Mild Photohyperthermia Therapy of Non-Melanoma Skin Cancer with PEGylated Reduced Nanographene Oxide.

Using a one-step thermal reduction and non-covalent chemical functionalization process, PEGylated reduced nanographene oxide (rGOn-PEG) was produced from nanographene oxide (GOn) and characterized in terms of particle size, dispersion stability, chemistry, and photothermal properties, in view of its use for photothermal therapy (PTT) of non-melanoma skin cancer. GOn infrared spectrum presented more intense bands assigned to oxygen containing functional groups than observed for rGOn-PEG. GOn C/O ratio decreased more than 50% comparing with rGOn-PEG and nitrogen was present in the latter (N at % = 20.6) due to introduction of PEG-NH2. Thermogravimetric analysis allowed estimating the amount of PEG in rGOn-PEG to be of about 56.1%. Simultaneous reduction and PEGylation increased the lateral dimensions from 287 ± 139 nm to 521 ± 397 nm, as observed by transmission electron microscopy and dynamic light scattering. rGOn-PEG exhibited ≈13-fold higher absorbance in the near-infrared radiation (NIR) region, as compared to unmodified GOn. Low power (150 mW cm-2) NIR irradiation using LEDs resulted in rGOn-PEG heating up to 47 °C, which is within the mild PTT temperature range. PEGylation strongly enhanced the dispersibility of rGOn in physiological media (phosphate buffered saline, fetal bovine serum, and cell culture medium) and also improved the biocompatibility of rGOn-PEG, in comparison to GOn (25-250 µg mL-1). After a single NIR LED irradiation treatment of 30 min, a decrease of ≈38% in A-431 cells viability was observed for rGOn-PEG (250 µg mL-1). Together, our results demonstrate the potential of irradiating rGOn-PEG using lower energy, cheaper, smaller, and safer LEDs, as alternative to high power lasers, for NIR mild hyperthermia therapy of cancer, namely non-melanoma skin cancer.

Customizable Composite Fibers for Engineering Skeletal Muscle Models.

Engineering tissue-like scaffolds that can mimic the microstructure, architecture, topology, and mechanical properties of native tissues while offering an excellent environment for cellular growth has remained an unmet need. To address these challenges, multicompartment composite fibers are fabricated. These fibers can be assembled through textile processes to tailor tissue-level mechanical and electrical properties independent of cellular level components. Textile technologies also allow control of the distribution of different cell types and the microstructure of fabricated constructs and the direction of cellular growth within the 3D microenvironment. Here, we engineered composite fibers from biocompatible cores and biologically relevant hydrogel sheaths. The fibers are mechanically robust to being assembled using textile processes and could support adhesion, proliferation, and maturation of cell populations important for the engineering of skeletal muscles. We also demonstrated that the changes in the coating of the multicompartment fibers could potentially enhance myogenesis in vitro.

Metabolic Disease Epidemics: Emerging Challenges in Regenerative Medicine.

The interplay between cell/tissue damage caused by metabolic dysfunction and regenerative potential remains elusive. The tissue engineering and regenerative medicine (TERM) field is now facing a worldwide epidemic of obesity. This Forum article uncovers prospective questions to be addressed in TERM toward the development of effective regenerative therapies adjusted to these new demands.

Enthesis Tissue Engineering: Biological Requirements Meet at the Interface.

IMPACT STATEMENT: The main goal of this review is to give an overview of cell-based and tissue engineered strategies for tendon-to-bone interface. The essential role of cells in tendon-to-bone interface development, healing, and regeneration, is underpinned by the physiological status of the junction. Therefore, recent studies underlining the effect of oxygen concentration and production of growth factors are reviewed. A critical view is made on the use of two-dimensional versus three-dimensional culture systems and mechanical stimulation. An overview of advances on bioengineered strategies in light of the biological/cellular requirements of enthesis will contribute to innovations in tendon-to-bone engineering and regeneration.

A Textile Platform Using Continuous Aligned and Textured Composite Microfibers to Engineer Tendon-to-Bone Interface Gradient Scaffolds.

Tendon-to-bone interfaces exhibit a hierarchical multitissue transition. To replicate the progression from mineralized to nonmineralized tissue, a novel 3D fibrous scaffold is fabricated with spatial control over mineral distribution and cellular alignment. For this purpose, wet-spun continuous microfibers are produced using polycaprolactone (PCL)/ gelatin and PCL/gelatin/hydroxyapatite nano-to-microparticles (HAp). Higher extrusion rates result in aligned PCL/gelatin microfibers while, in the case of PCL/gelatin/HAp, the presence of minerals leads to a less organized structure. Biological performance using human adipose-derived stem cells (hASCs) demonstrates that topography of PCL/gelatin microfibers can induce cytoskeleton elongation, resembling native tenogenic organization. Matrix mineralization on PCL/gelatin/HAp wet-spun composite microfibers suggest the production of an osteogenic-like matrix, without external addition of osteogenic medium supplementation. As proof of concept, a 3D gradient structure is produced by assembling PCL/gelatin and PCL/gelatin/HAp microfibers, resulting in a fibrous scaffold with a continuous topographical and compositional gradient. Overall, the feasibility of wet-spinning for the generation of continuously aligned and textured microfibers is demonsrated, which can be further assembled into more complex 3D gradient structures to mimic characteristic features of tendon-to-bone interfaces.