Synthesis of Well-Defined Poly(vinyl alcohol-co-vinyl acetate) Copolymers by Alcoholysis of Poly(vinyl acetate) Synthesized by Macromolecular Design via Interchange of Xanthate Polymerization, and Their Use as a Stabilizer in Emulsion (Co)polymerization of Vinyl Acetate.

This work aims at synthesizing tailor-made poly(vinyl alcohol-co-vinyl acetate) (PVA) amphiphilic copolymers, obtained by alcoholysis of poly(vinyl acetate) (PVAc) that could display improved properties as stabilizers compared to commercially available PVAs. Well-defined PVAs with different alcoholysis degrees were produced from a library of PVAc homopolymers synthesized by macromolecular design via interchange of xanthate polymerization and exhibiting different degrees of polymerization degrees. Subsequently, these PVAs were evaluated as stabilizers in the emulsion copolymerization of VAc and vinyl neodecanoate (VERSA 10, referred to as V10) and compared to a commercially available reference PVA obtained by alcoholysis of PVAc formed by conventional radical polymerization. In all cases, stable latexes were obtained and compared in terms of their colloidal characteristics. To identify the best stabilizer candidate, the amount of PVA remaining in water and not participating to the particle stabilization was evaluated in each case.

Peculiar Behavior of Methyl Methacrylate Emulsion Polymerization-Induced Self-Assembly Mediated by RAFT Using Poly(Methacrylic Acid) Macromolecular Chain Transfer Agent.

Reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization of methyl methacrylate (MMA) is successfully performed in water in the presence of a poly(methacrylic acid) (PMAA) macromolecular chain transfer agent (macroCTA) leading to the formation of self-stabilized PMAA-b-PMMA amphiphilic block copolymer particles. At pH 3.7, the reactions are well-controlled with narrow molar mass distributions. Increasing the initial pH, particularly above 5.6, results in a partial loss of reactivity of the PMAA macroCTA. The effect of the degree of polymerization (DPn) of the PMMA block, the solids content, the nature of the hydrophobic segment, and the pH on the morphology of the obtained diblock copolymer particles is then investigated. Worm-like micelles are formed for a DPn of PMMA of 20 (PMMA20), while "onion-like" particles and spherical vesicles are obtained for PMMA30 and PMMA50, respectively. In contrast, spherical particles are obtained for the DPns higher than 150. This unusual evolution of particle morphologies upon increasing the DPn of the PMMA block seems to be related to hydrogen bonds between hydrophilic MAA and hydrophobic MMA units.

Nitriles as Functionalization and Coupling Agents for Polyolefins Obtained by Coordinative Chain Transfer Polymerization.

Coordinative chain transfer polymerization (CCTP) of ethylene and its copolymerization with 1,3-butadiene is conducted in toluene at 80 °C using a combination of {(Me2Si(C13H8)2)Nd(µ-BH4)[(µ-BH4)Li(THF)]}2 (1) metal complex and various organomagnesium compounds used as chain transfer agents including n-butyl-n-octyl-magnesium (BOMAG), n-butyl-mesityl-magnesium (n-BuMgMes), n-butyl-magnesium chloride (n-BuMgCl), n-pentyl-magnesium bromide (n-C5H11MgBr), pentanediyl-1,5-di(magnesium bromide) (PDMB) and isobutyl-magnesium chloride (i-BuMgCl). Kinetics and performance in terms of control of the (co)polymerization are comparatively discussed particularly considering the presence of ether and the nature of the organomagnesium compounds employed. Taking advantage of the well-known reactivity between nitrile and molecular organomagnesium compounds, the functionalization of the chains is further carried out by deactivation of the polymerization medium with benzonitrile or methoxybenzonitrile compounds leading to ketone ω-functionalized chains. The success of the functionalizations is extended to coupling strategies using dinitrile reagents and to the functionalization of high molar mass ethylene butadiene rubber (EBR).

Deciphering Siloxane Bond Exchanges: From a Molecular Study to Vitrimerization and Recycling of Silicone Elastomers.

The activity of various additives promoting siloxane equilibration reactions is examined and quantified on model compounds. We found in particular that the "superbase" phosphazene derivative P4 -t Bu can promote very fast exchanges (a few seconds at 90 °C) even at low concentration (<0.1 wt %). We demonstrate that permanent silicone networks can be transformed into reprocessable and recyclable dynamic networks by mere introduction of such additives. Annealing at high temperature degrades the additives and deactivates the dynamic features of the silicone networks, reverting them back into permanent networks. A simple rheological experiment and the corresponding model allow to extract the critical kinetic parameters to predict and control such deactivations.

RAFT-Mediated Emulsion Polymerization-Induced Self-Assembly for the Synthesis of Core-Degradable Waterborne Particles.

Poly(N-acryloylmorpholine) (PNAM)-decorated waterborne nanoparticles comprising a core of either degradable polystyrene (PS) or poly(n-butyl acrylate) (PBA) were synthesized by polymerization-induced self-assembly (PISA) in water. A PNAM bearing a trithiocarbonate chain end (PNAM-TTC) was extended via reversible addition-fragmentation chain transfer (RAFT)-mediated emulsion copolymerization of either styrene (S) or n-butyl acrylate (BA) with dibenzo[c,e]oxepane-5-thione (DOT). Well-defined amphiphilic block copolymers were obtained. The in situ self-assembly of these polymers resulted in the formation of stable nanoparticles. The insertion of thioester units in the vinylic blocks enabled their degradation under basic conditions. The same strategy was then applied to the emulsion copolymerization of BA with DOT using a poly(ethylene glycol) (PEG) equipped with a trithiocarbonate end group, resulting in PEG-decorated nanoparticles with degradable PBA-based cores.

Multiblock Copolymers Based on Highly Crystalline Polyethylene and Soft Poly(ethylene-co-butadiene) Segments: Towards Polyolefin Thermoplastic Elastomers.

Block copolymers based on polyethylene (PE) and ethylene butadiene rubber (EBR) were obtained by successive controlled coordinative chain transfer polymerization (CCTP) of a mixture of ethylene and butadiene (80/20) and pure ethylene. EBR-b-PE diblock copolymers were synthesized using the {Me2 Si(C13 H8 )2 Nd(BH4 )2 Li(THF)}2 complex in combination with n-butyl,n-octyl magnesium (BOMAG) used as both the alkylating and chain transfer agent (CTA). Triblock and multiblock copolymers featuring highly semi-crystalline PE hard segments and soft EBR segments were further obtained by the development of a bimetallic CTA, the pentanediyl-1,5-di(magnesium bromide) (PDMB). These new block copolymers undergo crystallization-driven organization into lamellar structures and exhibit a variety of mechanical properties, including excellent extensibility and elastic recovery in the case of triblock and multiblock copolymers.

Ethylene-Coordinative Chain-Transfer Polymerization-Induced Self-Assembly (CCTPISA).

Block copolymers based on ethylene (E) and butadiene (B) were prepared using the ansa-bis(fluorenyl) complex {Me2 Si(C13 H8 )2 Nd(BH4 )2 Li(THF)}2 in combination with (n-Bu)(n-Oct)Mg (BOMAG) as a chain-transfer agent. The diblock copolymers incorporating a soft poly(ethylene-co-butadiene) segment, called ethylene butadiene rubber (EBR), and a hard polyethylene (PE) one were obtained by simply adjusting the different feeds of monomers during the polymerization. The soluble EBR block was formed first by feeding the catalytic system dissolved in toluene at 70 °C with a mixture of ethylene and butadiene (E/B molar ratio 80 : 20). Then the feeding was stopped leading to the consumption of a large part of the residual monomers. The reactor was finally fed with ethylene to form the PE block. By varying the molar mass of the latter, it is shown that the resulting soft-b-hard block copolymers can self-assemble simultaneously to the growth of the PE block in agreement with a polymerization-induced self-assembly (PISA) mechanism. The self-assembly is discussed considering the reaction conditions, the crystallization of the PE block, and the polymerization mechanism involved.

Switch from Anionic Polymerization to Coordinative Chain Transfer Polymerization: A Valuable Strategy to Make Olefin Block Copolymers.

Anionic polymerization of butadiene or/and styrene is performed with lithium initiators, functional or not. The polymer chains are subsequently transferred to magnesium. The resulting polymeryl-magnesium compounds were combined with {(Me2 Si(C13 H8 )2 )Nd(µ-BH4 )[(µ-BH4 )Li(THF)]}2 metallocene complex to act as macromolecular chain transfer agents (macroCTAs) in coordinative chain transfer polymerization (CCTP) of ethylene (E) or its copolymerization (CCTcoP) with butadiene (B). Block copolymers were produced for the first time by this switch from anionic polymerization to CCTP. Hard and soft blocks such as PB, polystyrene (PS), poly(styrene-co-butadiene) (SBR) obtained by anionic polymerization and PE or poly(ethylene-co-butadiene) (EBR) produced by CCT(co)P were combined and the corresponding structures were characterized.

One-Step Synthesis of Degradable Vinylic Polymer-Based Latexes via Aqueous Radical Emulsion Polymerization.

Aqueous emulsion copolymerizations of dibenzo[c,e]oxepane-5-thione (DOT) were performed with n-butyl acrylate (BA), styrene (S) and a combination of both. In all cases, stable latexes were obtained in less than two hours under conventional conditions; that is in the presence of sodium dodecyl sulfate (SDS) used as surfactant and potassium persulfate (KPS) as initiator. A limited solubility of DOT in BA was observed compared to S, yielding to a more homogeneous integration of DOT units in the PS latex. In both cases, the copolymer could be easily degraded under basic conditions. Emulsion terpolymerization between DOT, BA and S allowed us to produce stable latexes not only composed of degradable chains but also featuring a broad range of glass transition temperatures.

Triphenylphosphine-Functionalized Core-Cross-Linked Micelles and Nanogels with a Polycationic Outer Shell: Synthesis and Application in Rhodium-Catalyzed Biphasic Hydrogenations.

Unimolecular amphiphilic nanoreactors with a poly(4-vinyl-N-methylpyridinium iodide) (P4VPMe+ I- ) polycationic outer shell and two different architectures (core-cross-linked micelles, CCM, and nanogels, NG), with narrow size distributions around 130-150 nm in diameter, were synthesized by RAFT polymerization from an R0 -4VPMe+ I- 140 -b-S50 -SC(S)SPr macroRAFT agent by either chain extension with a long (300 monomer units) hydrophobic polystyrene-based block followed by cross-linking with diethylene glycol dimethacrylate (DEGDMA) for the CCM particles, or by simultaneous chain extension and cross-linking for the NG particles. A core-anchored triphenylphosphine (TPP) ligand functionality was introduced by using 4-diphenylphosphinostyrene (DPPS) as a comonomer (5-20 % mol mol-1 ) in the chain extension (for CCM) or chain extension/cross-linking (for NG) step. The products were directly obtained as stable colloidal dispersions in water (latexes). After loading with [RhCl(COD)]2 to yield [RhCl(COD)(TPP@CCM)] or [RhCl(COD)(TPP@NG)], respectively, the polymers were used as polymeric nanoreactors in Rh-catalyzed aqueous biphasic hydrogenation of the model substrates styrene and 1-octene, either neat (for styrene) or in an organic solvent (toluene or 1-nonanol). All hydrogenations were rapid (TOF up to 300 h-1 ) at 25 °C and 20 bar of H2 pressure, the biphasic mixture rapidly decanted at the end of the reaction (<2 min), the Rh loss was negligible (<0.1 ppm in the recovered organic phase), and the catalyst phase could be recycled 10 times without significant loss of catalytic activity.

Statistical and Block Copolymers of Ethylene and Vinyl Acetate via Reversible Addition-Fragmentation Chain Transfer Polymerization.

A dithiocarbamate chain transfer agent (CTA) based on Z-group substituted with a diphenyl amine (-NPh2 ) moiety is selected for the synthesis of statistical and diblock copolymers of ethylene and vinyl acetate via reversible addition-fragmentation chain transfer polymerization. Benefiting from the good chain growth control of polyethylene (PE), poly(vinyl acetate) (PVAc), and poly(ethylene-co-vinyl acetate) (EVA) achieved with this CTA, linear diblock copolymers of the type EVA-b-PE, EVA-b-EVA, and PVAc-b-EVA are successfully synthesized. A three-arm EVA star is additionally obtained starting from a trifunctional dithiocarbamate CTA.

Block Copolymers Based on Ethylene and Methacrylates Using a Combination of Catalytic Chain Transfer Polymerisation (CCTP) and Radical Polymerisation.

Two scalable polymerisation methods are used in combination for the synthesis of ethylene and methacrylate block copolymers. ω-Unsaturated methacrylic oligomers (MMAn ) produced by catalytic chain transfer (co)polymerisation (CCTP) of methyl methacrylate (MMA) and methacrylic acid (MAA) are used as reagents in the radical polymerisation of ethylene (E) in dimethyl carbonate solvent under relatively mild conditions (80 bar, 70 °C). Kinetic measurements and analyses of the produced copolymers by size exclusion chromatography (SEC) and a combination of nuclear magnetic resonance (NMR) techniques indicate that MMAn is involved in a degradative chain transfer process resulting in the formation of (MMA)n -b-PE block copolymers. Molecular modelling performed by DFT supports the overall reactivity scheme and observed selectivities. The effect of MMAn molar mass and composition is also studied. The block copolymers were characterised by differential scanning calorimetry (DSC) and their bulk behaviour studied by SAXS/WAXS analysis.

Synergetic Effect of Water-Soluble PEG-Based Macromonomers and Cellulose Nanocrystals for the Stabilization of PMMA Latexes by Surfactant-Free Emulsion Polymerization.

The combination of cellulose nanocrystals (CNCs) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) was evaluated to synthesize stable latexes by surfactant-free emulsion polymerization of methyl methacrylate (MMA). Cellulose-particle interaction was provided due to the dual role of PEGMA, acting as water-soluble comonomer with MMA under emulsion polymerization conditions and able to interact with CNCs, recovered from sulfuric acid hydrolysis (H2SO4-CNCs). After preliminary experiments designed to validate the affinity between CNCs and PEG-stabilized PMMA particles obtained by MMA/PEGMA emulsion copolymerization, the effect of the PEGMA content and molar mass and also of the content of CNCs on the kinetics of the polymerization and the stability of the latexes were investigated. The use of PEGMA300 (Mn = 300 g mol-1, 2-10 wt %) allowed the formation of a stable latex, however, with a broad particle size distribution and the presence of both small (ca. 25-50 nm) and large (ca. 425-650 nm) particles (at 10 wt %, Dn = 278 nm and Dw/Dn = 1.34). Increasing the molar mass of PEGMA (PEGMA950 or PEGMA2080) significantly increased the fraction of small particles. This was explained by the nucleation and growth of small polymer particles adsorbed at the CNCs' surface, resulting in a particular organization where the CNCs were covered by several polymer particles. The influence of the initial amount of CNCs in these systems was finally evidenced, the polymerization being faster as the content of CNCs increased, but only the latexes prepared with 2 and 5 wt % of CNCs were stable.

Filling of Nanometric Pores with Polymer by Initiated Chemical Vapor Deposition.

The integration of porous thin films using microelectronic compatible processes sometimes requires the protection of the interior of the pores during the critical integration steps. In this paper, the polymerization of neo-pentyl methacrylate (npMA) is performed via initiated chemical vapor deposition (iCVD) on a porous organosilicate (SiOCH) and on a dense SiOCH. The characterizations by Fourier-transform infrared spectroscopy, spectroscopic ellipsometry, and time-of-flight secondary ion mass spectrometry of the different stacks show that iCVD is a powerful technique to polymerize npMA in the nanometric pores and thus totally fill them with a polymer. The study of the pore filling for very short iCVD durations shows that the polymerization in the pores is complete in less than ten seconds and is uniform in depth. Then, the poly(npMA) film growth continues on top of the filled SiOCH layer. These characteristics make iCVD a straightforward and very promising alternative to other infiltration techniques in order to fill the porosity of microporous thin films.

RAFT-Mediated Polymerization-Induced Self-Assembly.

After a brief history that positions polymerization-induced self-assembly (PISA) in the field of polymer chemistry, this Review will cover the fundamentals of the PISA mechanism. Furthermore, this Review will also give an overview of some of the features and limitations of RAFT-mediated PISA in terms of the choice of the components involved, the nature of the nanoobjects that can be obtained and how the syntheses can be controlled, as well as some potential applications.

Ethylene Polymerization-Induced Self-Assembly (PISA) of Poly(ethylene oxide)-block-polyethylene Copolymers via RAFT.

Poly(ethylene oxide) (PEO) with dithiocarbamate chain ends (PEO-SC(=S)-N(CH3 )Ph and PEO-SC(=S)-NPh2 , named PEO-1 and PEO-2, respectively) were used as macromolecular chain-transfer agents (macro-CTAs) to mediate the reversible addition-fragmentation chain transfer (RAFT) polymerization of ethylene in dimethyl carbonate (DMC) under relatively mild conditions (80 °C, 80 bar). While only a slow consumption of PEO-1 was observed, the rapid consumption of PEO-2 led to a clean chain extension and the formation of a polyethylene (PE) segment. Upon polymerization, the resulting block copolymers PEO-b-PE self-assembled into nanometric objects according to a polymerization-induced self-assembly (PISA).

In Situ Monitoring of Latex Film Formation by Small-Angle Neutron Scattering: Evolving Distributions of Hydrophilic Stabilizers in Drying Colloidal Films.

The distribution of hydrophilic species, such as surfactants, in latex films is of critical importance for the performance of adhesives, coatings, and inks, among others. However, the evolution of this distribution during the film formation process and in the resulting dried films remains insufficiently elucidated. Here, we present in situ (wet) and ex situ (dry) small-angle neutron scattering (SANS) experiments that follow the film formation of two types of latex particles, which differ in their stabilizer: either a covalently bonded poly(methacrylic acid) (PMAA) segment or a physically adsorbed surfactant (sodium dodecyl sulfate, SDS). By fitting the experimental SANS data and combining with gravimetry experiments, we have ascertained the hydrophilic species distribution within the drying film and followed its evolution by correlating the size and shape of stabilizer clusters with the drying time. The evolution of the SDS distribution over drying time is being driven by a reduction in the interfacial free energy. However, the PMAA-based stabilizer macromolecules are restricted by their covalent bonding to core polymer chains and hence form high-surface area disclike phases at the common boundary between particles and PMAA micelles. Contrary to an idealized view of film formation, PMAA does not remain in the walls of a continuous honeycomb structure. The results presented here shed new light on the nanoscale distribution of hydrophilic species in drying and ageing latex films. We provide valuable insights into the influence of the stabilizer mobility on the final structure of latex films.

Polymer Nanospheres with Hydrophobic Surface Groups as Supramolecular Building Blocks Produced by Aqueous PISA.

A robust and straightforward synthesis of waterborne polymer nanospheres bearing the supramolecular association unit dialkoxynapthalene at their surface is presented using polymerization-induced self-assembly (PISA). A RAFT agent bearing this unit is first employed to produce poly(acrylic acid) chains, which are then chain-extended with styrene (S) to spontaneously form the nano-objects via RAFT aqueous emulsion polymerization. The particular challenge posed by the dialkoxynapthalene hydrophobicity can be overcome by the use of PISA and the deprotonation of the poly(acrylic acid). At pH = 7, very homogeneous latexes are obtained. The particle diameters can be tuned from 36 to 105 nm (with a narrow particle size distribution) by varying the molar mass of the PS block. The surface accessibility of the dialkoxynapthalene moieties is demonstrated by complexation with the complementary host cyclobis(paraquat-p-phenylene) (CBPQT4+ · Cl- ), highlighting the potential of the nanospheres to act as building blocks for responsive supramolecular structures.

Polyethylene Aerogels with Combined Physical and Chemical Crosslinking: Improved Mechanical Resilience and Shape-Memory Properties.

While the introduction of polymers into aerogels strongly enhances their toughness, truly elastic monolithic aerogels which restore their dimensions upon extensive compression are still challenging to synthesize. In this context hydrophobic semi-crystalline polymers with low glass transition temperatures, and combined stiffness and flexibility, have only recently attracted attention. Shown here is that polyethylene aerogels with a low density, and combined chemical crosslinking and high crystallinity, display high moduli and excellent mechanical resilience. To maximize the crystallinity of these aerogels while maintaining a high crosslinking density, polyethylene networks with well-defined segments were synthesized by hydrosilylation crosslinking of telechelic, vinyl-functionalized oligomers obtained from catalyzed chain-growth polymerization. Recoverable deformations both above and below the melting temperature of polyethylene affords remarkable shape-memory properties.

Aromatic Xanthates and Dithiocarbamates for the Polymerization of Ethylene through Reversible Addition-Fragmentation Chain Transfer (RAFT).

Aromatic xanthates and dithiocarbamates were used as chain-transfer agents (CTAs) in reversible addition-fragmentation chain-transfer (RAFT) polymerizations of ethylene under milder conditions (≤80 °C, ≤200 bar). While detrimental side fragmentation of the intermediate radical leading to loss of living chain-ends was observed before with alkyl xanthate CTAs, this was absent for the aromatic CTAs. The loss of living chain-ends was nevertheless detected for the aromatic xanthates via a different mechanism based on cross-termination. Narrow molar-mass distributions with dispersities between 1.2 and 1.3 were still obtained up to number average molar masses Mn of 1000 g mol-1 . The loss of chain-ends was minor for dithiocarbamates, yielding polyethylene up to Mn =3000 g mol-1 with dispersities between 1.4 and 1.8. While systems investigated showed significant rate retardation, the dithiocarbamates are the first CTAs giving polyethylene with a high livingness via RAFT polymerization.