Bioaugmentation with PGP-trace element tolerant bacterial consortia affects Pb uptake by Helianthus annuus grown on trace element polluted military soils.

In this study, we sought to compose consortia of plant growth-promoting (PGP) and trace element tolerant bacteria, to improve plant growth and inhibit uptake and translocation of trace elements, eventually allowing the cultivation of profitmaking crops on trace elements polluted soils, reducing the risks of entrance of these elements into the food chain. Sunflower (Helianthus annuus L.) was grown on two polluted military soils (MS1 and MS2) in greenhouse microcosms and inoculated with three different bacterial consortia (C1, C2, C3). Growth and physiological status of the plants were unaffected during the experiment with the inoculation. After 2 months, plants were harvested. Consortium C2 and C3 decreased Pb shoot bioaccumulation by respectively 80-85% when plants were grown in the MS1 and even to concentrations below detection limit in plants grown in MS2. Differences in uptake and (sub)cellular localization of Pb and Cd in selected bacterial isolates were investigated in vitro by TEM-EDX. Pb absorption was observed by Bacillus wiedmanni ST29 and Bacillus paramycoides ST9 cultures. While adsorption at the bacterial cell wall was observed by Bacillus paramycoides ST9 and retention in the extracellular matrix by Cellulosimicrobium cellulans ST54.

Ultrasonically spray coated silver layers from designed precursor inks for flexible electronics.

Integration of electronic circuit components onto flexible materials such as plastic foils, paper and textiles is a key challenge for the development of future smart applications. Therefore, conductive metal features need to be deposited on temperature sensitive substrates in a fast and straightforward way. The feasibility of these emerging (nano-) electronic technologies depends on the availability of well-designed deposition techniques and on novel functional metal inks. As ultrasonic spray coating (USSC) is one of the most promising techniques to meet the above requirements, innovative metal organic decomposition (MOD) inks are designed to deposit silver features on plastic foils. Various amine ligands were screened and their influence on the ink stability and the characteristics of the resulting metal depositions were evaluated to determine the optimal formulation. Eventually, silver layers with excellent performance in terms of conductivity (15% bulk silver conductivity), stability, morphology and adhesion could be obtained, while operating in a very low temperature window of 70 °C-120 °C. Moreover, the optimal deposition conditions were determined via an in-depth analysis of the ultrasonically sprayed silver layers. Applying these tailored MOD inks, the USSC technique enabled smooth, semi-transparent silver layers with a tunable thickness on large areas without time-consuming additional sintering steps after deposition. Therefore, this novel combination of nanoparticle-free Ag-inks and the USSC process holds promise for high throughput deposition of highly conductive silver features on heat sensitive substrates and even 3D objects.

The screening of various biochars for Cd2+ removal at relevant soil pH.

Fourteen biochars from seven biomass sources were investigated on their long-term Cd2+ removal. The experiments consisted of a ten-day batch Cd2+ adsorption in a pH-buffered solution (pH = 6) to minimise pH effects. Insect frass, spent peat and chicken manure-derived biochars are promising Cd2+ adsorbents. Pyrolysis temperature was crucial for optimising Cd2+ removal by insect frass and spent peat-derived biochars. For these biochars, a pyrolysis temperature of 450 °C was optimal. In contrast, the Cd2+ removal by chicken manure biochars was independent of pyrolysis temperature. The Cd2+ removal by insect-frass and spent peat-derived biochars was associated with chemisorption on surface functionalities, while using chicken manure biochars was more associated with Cd2+ precipitation. The kinetics of Cd2+ removal over the course of ten days showed that insect frass biochar (450 °C) showed a gradual increase from 36 to 75 % Cd2+ removal, while chicken manure and spent peat-derived biochar (450 °C) already showed a higher Cd2+ removal (72 - 89 %) after day 1. This evidences that a long-term Cd2+ removal effect can be expected for some biochars. This should certainly be taken into consideration in future soil-based experiments.

A MIP-based impedimetric sensor for the detection of low-MW molecules.

Mimicking the selectivity and sensitivity of biological systems for sensor devices is of increasing interest in biomedical, environmental and chemical analysis. Synthetic materials with imprinted nanocavities, acting as highly selective artificial receptors, are a tailor-made solution in obtaining such a sensor. Incorporation of such molecularly imprinted polymers (MIPs) in a platform suitable for electrochemical measurements, can offer high sensitivity together with device miniaturization and an electronic read-out. As a proof of principle, a MIP-based sensor for L-nicotine has been developed. To this end, the molecular structure of L-nicotine was imprinted in a polymer matrix of polymethacrylic acid (PMAA). Subsequently, microparticles of the imprinted polymer were immobilized on thin films of the conjugated polymer OC(1)C(10)-PPV. These films were incorporated in an impedimetric sensing device. Using electrochemical impedance spectroscopy, the real part of the impedance was monitored for various concentrations. This setup allows for the detection of l-nicotine from 1 to 10 nM and is insensitive for the resembling molecule L-cotinine.

Ti surface doping of LiNi0.5Mn1.5O4-δ positive electrodes for lithium ion batteries.

The particle surface of LiNi0.5Mn1.5O4-δ (LNMO), a Li-ion battery cathode material, has been modified by Ti cation doping through a hydrolysis-condensation reaction followed by annealing in oxygen. The effect of different annealing temperatures (500-850 °C) on the Ti distribution and electrochemical performance of the surface modified LNMO was investigated. Ti cations diffuse from the preformed amorphous 'TiO x ' layer into the LNMO surface during annealing at 500 °C. This results in a 2-4 nm thick Ti-rich spinel surface having lower Mn and Ni content compared to the core of the LNMO particles, which was observed with scanning transmission electron microscopy coupled with compositional EDX mapping. An increase in the annealing temperature promotes the formation of a Ti bulk doped LiNi(0.5-w)Mn(1.5+w)-t Ti t O4 phase and Ti-rich LiNi0.5Mn1.5-y Ti y O4 segregates above 750 °C. Fourier-transform infrared spectrometry indicates increasing Ni-Mn ordering with annealing temperature, for both bare and surface modified LNMO. Ti surface modified LNMO annealed at 500 °C shows a superior cyclic stability, coulombic efficiency and rate performance compared to bare LNMO annealed at 500 °C when cycled at 3.4-4.9 V vs. Li/Li+. The improvements are probably due to suppressed Ni and Mn dissolution with Ti surface doping.

Accumulation forms of Zn and Pb in Phaseolus vulgaris in the presence and absence of EDTA.

The internalized speciation of Zn and Pb in roots and leaves of Phaseolus vulgaris grown in zinc sulfate, zinc EDTA, lead nitrate, and lead EDTA solutions were studied by electron microscopy (Zn) and extended X-ray absorption fine structure (EXAFS) spectroscopy (Zn and Pb). Zn was predominantly present as Zn phosphate dihydrate in the roots and leaves of the plant regardless of its form in solution. Pb was predominantly found in the leaves as cerussite (lead carbonate) when the plant was grown in Pb nitrate solution and as a mixture of PbEDTA and an undetermined species in contact with PbEDTA solution. Therefore, Phaseolus vulgaris is able to dissociate totally (Zn) or partly (Pb) the two metal-EDTA complexes from the nutrient solution and to bind these metals in other forms.