Molecular-Level Anion and Li+ Co-Regulation by Amphoteric Polymer Separator for High-Rate Stable Lithium Metal Anode.

Regulating ion transport is a prevailing strategy to suppress lithium dendrite growth, in which the distribution of ion regulatory sites plays an important role. Here a hyperbranched polyamidoamine (HBPA) grafted polyethylene (PE) composite separator (HBPA-g-PE) is reported. The densely and uniformly distributed positive -NH2 and negative -CHNO- groups efficiently restrict the anion migration and promote Li+ transport at the surface of the lithium metal anode. The obtained Li foil symmetric cell delivers a stable cycle performance with a low-voltage hysteresis of 130 mV for over 1500 h (3000 cycles) at an ultrahigh current density of 20 mA cm-2 and a practical areal capacity of 5 mAh cm-2. Moreover, HBPA-g-PE separator enables a practical lithium-sulfur battery to achieve over 200-cycle stable performance with initial and retained capacity of 700 and 455 mAh g-1, at a high sulfur loading of 4 mg cm-2 and a low electrolyte content/sulfur loading ratio of 8 µL mg-1.

Alkyl Chains Tune Molecular Orientations to Enable Dual Passivation in Inverted Perovskite Solar Cells.

Nonradiative recombination losses occurring at the interface pose a significant obstacle to achieve high-efficiency perovskite solar cells (PSCs), particularly in inverted PSCs. Passivating surface defects using molecules with different functional groups represents one of the key strategies for enhancing PSCs efficiency. However, a lack of insight into the passivation orientation of molecules on the surface is a challenge for rational molecular design. In this study, aminothiol hydrochlorides with different alkyl chains but identical electron-donating (-SH) and electron-withdrawing (-NH3 +) groups were employed to investigate the interplay between molecular structure, orientation, and interaction on perovskite surface. The 2-Aminoethane-1-thiol hydrochloride with shorter alkyl chains exhibited a preference of parallel orientations, which facilitating stronger interactions with the surface defects through strong coordination and hydrogen bonding. The resultant perovskite films following defect passivation demonstrate reduced ion migration, inhibition of nonradiative recombination, and more n-type characteristics for efficient electron transfer. Consequently, an impressive power conversion efficiency of 25 % was achieved, maintaining 95 % of its initial efficiency after 500 hours of continuous maximum power point tracking.

An Improved Diabatization Scheme for Computing the Electronic Circular Dichroism of Proteins.

We advance the quality of first-principles calculations of protein electronic circular dichroism (CD) through an amelioration of a key deficiency of a previous procedure that involved diabatization of electronic states on the amide chromophore (to obtain interamide couplings) in a ß-strand conformation of a diamide. This yields substantially improved calculated far-ultraviolet (far-UV) electronic circular dichroism (CD) spectra for ß-sheet conformations. The interamide couplings from the diabatization procedure for 13 secondary structural elements (13 diamide structures) are applied to compute the CD spectra for seven example proteins: myoglobin (α helix), jacalin (ß strand), concanavalin A (ß type I), elastase (ß type II), papain (α + ß), 310-helix bundle (310-helix) and snow flea antifreeze protein (polyproline). In all cases, except concanavalin A and papain, the CD spectra computed using the interamide couplings from the diabatization procedure yield improved agreement with experiment with respect to previous first-principles calculations.

Understanding cellulose pyrolysis via ab initio deep learning potential field.

Comprehensive and dynamic studies of cellulose pyrolysis reaction mechanisms are crucial in designing experiments and processes with enhanced safety, efficiency, and sustainability. The details of the pyrolysis mechanism are not readily available from experiments but can be better described via molecular dynamics (MD) simulations. However, the large size of cellulose molecules challenges accurate ab initio MD simulations, while existing reactive force field parameters lack precision. In this work, precise ab initio deep learning potentials field (DPLF) are developed and applied in MD simulations to facilitate the study of cellulose pyrolysis mechanisms. The formation mechanism and production rate of both valuable and greenhouse products from cellulose at temperatures larger than 1073 K are comprehensively described. This study underscores the critical role of advanced simulation techniques, particularly DLPF, in achieving efficient and accurate understanding of cellulose pyrolysis mechanisms, thus promoting wider industrial applications.

Intramolecular chalcogen bonding activated SuFEx click chemistry for efficient organic-inorganic linking.

SuFEx click chemistry demonstrates remarkable molecular assembly capabilities. However, the effective utilization of alkyl sulfonyl fluoride hubs in SuFEx chemistry, particularly in reactions with alcohols and primary amines, presents considerable challenges. This study pioneers an intramolecular chalcogen bonding activated SuFEx (S-SuFEx) click chemistry employing alkyl sulfonyl fluorides with γ-S as the activating group. The ChB-activated alkyl sulfonyl fluorides can react smoothly with phenols, alcohols, and amines, exhibiting enhanced reactivity compared to SO2F2. Excellent yields have been achieved with all 75 tested substrates. Pioneering the application of S-SuFEx chemistry, we highlight its immense potential in organic-inorganic linking, considering the critical role of interfacial covalent bonding in material fabrication. The S-SuFEx hub 1c, incorporating a trialkoxy silane group has been specifically designed and synthesized for organic-inorganic linking. In a simple step, 1c efficiently anchors various organic compounds onto surfaces of inorganic materials, forming functionalized surfaces with properties such as antibacterial activity, hydrophobicity, and fluorescence.

Nucleation Regulation and Mesoscopic Dielectric Screening in α-FAPbI3.

While significant advancements in power conversion efficiencies (PCEs) of α-FAPbI3perovskite solar cells (PSCs) have been made, attaining controllable perovskite crystallization is still a considerable hurdle. This challenge stems from the initial formation of δ-FAPbI3, a more energetically stable phase than the desired black α-phase, during film deposition. This disrupts the heterogeneous nucleation of α-FAPbI3, causing the formation of mixed phases and defects. To this end, polarity engineering using molecular additives, specifically ((methyl-sulfonyl)phenyl)ethylamines (MSPEs) are introduced. The findings reveal that the interaction of PbI2-MSPEs-FAI intermediates is enhanced with the increased polarity of MSPEs, which in turn expedites the nucleation of α-FAPbI3. This leads to the development of high-quality α-FAPbI3 films, characterized by vertical crystal orientation and reduced residual stresses. Additionally, the increased dipole moment of MSPE at perovskite grain boundaries attenuates Coulomb attractions among charged defects and screens carrier capture process, thereby diminishing non-radiative recombination. Utilizing these mechanisms, PSCs treated with highly polar 2-(4-MSPE) achieve an impressive PCE of 25.2% in small-area devices and 20.5% in large-area perovskite solar modules (PSMs) with an active area of 70 cm2. These results demonstrate the effectiveness of this strategy in achieving controllable crystallization of α-FAPbI3, paving the way for scalable-production of high-efficiency PSMs.