Distribution control enables efficient reduced-dimensional perovskite LEDs.

Light-emitting diodes (LEDs) based on perovskite quantum dots have shown external quantum efficiencies (EQEs) of over 23% and narrowband emission, but suffer from limited operating stability1. Reduced-dimensional perovskites (RDPs) consisting of quantum wells (QWs) separated by organic intercalating cations show high exciton binding energies and have the potential to increase the stability and the photoluminescence quantum yield2,3. However, until now, RDP-based LEDs have exhibited lower EQEs and inferior colour purities4-6. We posit that the presence of variably confined QWs may contribute to non-radiative recombination losses and broadened emission. Here we report bright RDPs with a more monodispersed QW thickness distribution, achieved through the use of a bifunctional molecular additive that simultaneously controls the RDP polydispersity while passivating the perovskite QW surfaces. We synthesize a fluorinated triphenylphosphine oxide additive that hydrogen bonds with the organic cations, controlling their diffusion during RDP film deposition and suppressing the formation of low-thickness QWs. The phosphine oxide moiety passivates the perovskite grain boundaries via coordination bonding with unsaturated sites, which suppresses defect formation. This results in compact, smooth and uniform RDP thin films with narrowband emission and high photoluminescence quantum yield. This enables LEDs with an EQE of 25.6% with an average of 22.1 ±1.2% over 40 devices, and an operating half-life of two hours at an initial luminance of 7,200 candela per metre squared, indicating tenfold-enhanced operating stability relative to the best-known perovskite LEDs with an EQE exceeding 20%1,4-6.

Strongly-confined colloidal lead-halide perovskite quantum dots: from synthesis to applications.

Colloidal semiconductor nanocrystals enable the realization and exploitation of quantum phenomena in a controlled manner, and can be scaled up for commercial uses. These materials have become important for a wide range of applications, from ultrahigh definition displays, to solar cells, quantum computing, bioimaging, optical communications, and many more. Over the last decade, lead-halide perovskite nanocrystals have rapidly gained prominence as efficient semiconductors. Although the majority of studies have focused on large nanocrystals in the weak- to intermediate-confinement regime, quantum dots (QDs) in the strongly-confined regime (with sizes smaller than the Bohr diameter, which ranges from 4-12 nm for lead-halide perovskites) offer unique opportunities, including polarized light emission and color-pure, stable luminescence in the region that is unattainable by perovskites with single-halide compositions. In this tutorial review, we bring together the latest insights into this emerging and rapidly growing area, focusing on the synthesis, steady-state optical properties (including exciton fine-structure splitting), and transient kinetics (including hot carrier cooling) of strongly-confined perovskite QDs. We also discuss recent advances in their applications, including single photon emission for quantum technologies, as well as light-emitting diodes. We finish with our perspectives on future challenges and opportunities for strongly-confined QDs, particularly around improving the control over monodispersity and stability, important fundamental questions on the photophysics, and paths forward to improve the performance of perovskite QDs in light-emitting diodes.

IGF2BP3 prevent HMGB1 mRNA decay in bladder cancer and development.

BACKGROUND: IGF2BP3 functions as an RNA-binding protein (RBP) and plays a role in the posttranscriptional control of mRNA localization, stability, and translation. Its dysregulation is frequently associated with tumorigenesis across various cancer types. Nonetheless, our understanding of how the expression of the IGF2BP3 gene is regulated remains limited. The specific functions and underlying mechanisms of IGF2BP3, as well as the potential benefits of targeting it for therapeutic purposes in bladder cancer, are not yet well comprehended. METHODS: The mRNA and protein expression were examined by RT-qPCR and western blotting, respectively. The methylation level of CpG sites was detected by Bisulfite sequencing PCR (BSP). The regulation of IGF2BP3 expression by miR-320a-3p was analyzed by luciferase reporter assay. The functional role of IGF2BP3 was determined through proliferation, colony formation, wound healing, invasion assays, and xenograft mouse model. The regulation of HMGB1 by IGF2BP3 was investigated by RNA immunoprecipitation (RIP) and mRNA stability assays. RESULTS: We observed a significant elevation in IGF2BP3 levels within bladder cancer samples, correlating with more advanced stages and grades, as well as an unfavorable prognosis. Subsequent investigations revealed that the upregulation of IGF2BP3 expression is triggered by copy number gain/amplification and promoter hypomethylation in various tumor types, including bladder cancer. Furthermore, miR-320a-3p was identified as another negative regulator in bladder cancer. Functionally, the upregulation of IGF2BP3 expression exacerbated bladder cancer progression, including the proliferation, migration, and invasion of bladder cancer. Conversely, IGF2BP3 silencing produced the opposite effects. Moreover, IGF2BP3 expression positively correlated with inflammation and immune infiltration in bladder cancer. Mechanistically, IGF2BP3 enhanced mRNA stability and promoted the expression of HMGB1 by binding to its mRNA, which is a factor that promotes inflammation and orchestrates tumorigenesis in many cancers. Importantly, pharmacological inhibition of HMGB1 with glycyrrhizin, a specific HMGB1 inhibitor, effectively reversed the cancer-promoting effects of IGF2BP3 overexpression in bladder cancer. Furthermore, the relationship between HMGB1 mRNA and IGF2PB3 is also observed in mammalian embryonic development, with the expression of both genes gradually decreasing as embryonic development progresses. CONCLUSIONS: Our present study sheds light on the genetic and epigenetic mechanisms governing IGF2BP3 expression, underscoring the critical involvement of the IGF2BP3-HMGB1 axis in driving bladder cancer progression. Additionally, it advocates for the investigation of inhibiting IGF2BP3-HMGB1 as a viable therapeutic approach for treating bladder cancer.

Wide-Bandgap Perovskite Quantum Dots in Perovskite Matrix for Sky-Blue Light-Emitting Diodes.

The epitaxial growth of a perovskite matrix on quantum dots (QDs) has enabled the emergence of efficient red light-emitting diodes (LEDs) because it unites efficient charge transport with strong surface passivation. However, the synthesis of wide-band gap (Eg) QD-in-matrix heterostructures has so far remained elusive in the case of sky-blue LEDs. Here, we developed CsPbBr3 QD-in-perovskite matrix solids that enable high luminescent efficiency and spectral stability with an optical Eg of over 2.6 eV. We screened alloy candidates that modulate the perovskite Eg and allow heteroepitaxy, seeking to implement lattice-matched type-I band alignment. Specifically, we introduced a CsPb1-xSrxBr3 matrix, in which alloying with Sr2+ increased the Eg of the perovskite and minimized lattice mismatch. We then developed an approach to passivation that would overcome the hygroscopic nature of Sr2+. We found that bis(4-fluorophenyl)phenylphosphine oxide strongly coordinates with Sr2+ and provides steric hindrance to block H2O, a finding obtained by combining molecular dynamics simulations with experimental results. The resulting QD-in-matrix solids exhibit enhanced air- and photo-stability with efficient charge transport from the matrix to the QDs. LEDs made from this material exhibit an external quantum efficiency of 13.8% and a brightness exceeding 6000 cd m-2.

Dipole Engineering through the Orientation of Interface Molecules for Efficient InP Quantum Dot Light-Emitting Diodes.

InP-based quantum dot (QD) light-emitting diodes (QLEDs) provide a heavy-metal-free route to size-tuned LEDs having high efficiency. The stability of QLEDs may be enhanced by replacing organic hole-injection layers (HILs) with inorganic layers. However, inorganic HILs reported to date suffer from inefficient hole injection, the result of their shallow work functions. Here, we investigate the tuning of the work function of nickel oxide (NiOx) HILs using self-assembled molecules (SAMs). Density functional theory simulations and near-edge X-ray absorption fine structure put a particular focus onto the molecular orientation of the SAMs in tuning the work function of the NiOx HIL. We find that orientation plays an even stronger role than does the underlying molecular dipole itself: SAMs having the strongest electron-withdrawing nitro group (NO2), despite having a high intrinsic dipole, show limited work function tuning, something we assign to their orientation parallel to the NiOx surface. We further find that the NO2 group─which delocalizes electrons over the molecule by resonance─induces a deep lowest unoccupied molecular orbital level that accepts electrons from QDs, producing luminescence quenching. In contrast, SAMs containing a trifluoromethyl group exhibit an angled orientation relative to the NiOx surface, better activating hole injection into the active layer without inducing luminescence quenching. We report an external quantum efficiency (EQE) of 18.8%─the highest EQE among inorganic HIL-based QLEDs (including Cd-based QDs)─in InP QLEDs employing inorganic HILs.

Bright and Stable Light-Emitting Diodes Based on Perovskite Quantum Dots in Perovskite Matrix.

Light-emitting diodes (LEDs) based on metal halide perovskite quantum dots (QDs) have achieved impressive external quantum efficiencies; however, the lack of surface protection of QDs, combined with efficiency droop, decreases device operating lifetime at brightnesses of interest. The epitaxial incorporation of QDs within a semiconducting shell provides surface passivation and exciton confinement. Achieving this goal in the case of perovskite QDs remains an unsolved challenge in view of the materials' chemical instability. Here, we report perovskite QDs that remain stable in a thin layer of precursor solution of perovskite, and we use strained QDs as nucleation centers to drive the homogeneous crystallization of a perovskite matrix. Type-I band alignment ensures that the QDs are charge acceptors and radiative emitters. The new materials show suppressed Auger bi-excition recombination and bright luminescence at high excitation (600 W cm-2), whereas control materials exhibit severe bleaching. Primary red LEDs based on the new materials show an external quantum efficiency of 18%, and these retain high performance to brightnesses exceeding 4700 cd m-2. The new materials enable LEDs having an operating half-life of 2400 h at an initial luminance of 100 cd m-2, representing a 100-fold enhancement relative to the best primary red perovskite LEDs.

Ligand-Assisted Reconstruction of Colloidal Quantum Dots Decreases Trap State Density.

Increasing the power conversion efficiency (PCE) of colloidal quantum dot (CQD) solar cells has relied on improving the passivation of CQD surfaces, enhancing CQD coupling and charge transport, and advancing device architecture. The presence of hydroxyl groups on the nanoparticle surface, as well as dimers-fusion between CQDs-has been found to be the major source of trap states, detrimental to optoelectronic properties and device performance. Here, we introduce a CQD reconstruction step that decreases surface hydroxyl groups and dimers simultaneously. We explored the dynamic interaction of charge carriers between band-edge states and trap states in CQDs using time-resolved spectroscopy, showing that trap to ground-state recombination occurs mainly from surface defects in coupled CQD solids passivated using simple metal halides. Using CQD reconstruction, we demonstrate a 60% reduction in trap density and a 25% improvement in charge diffusion length. These translate into a PCE of 12.5% compared to 10.9% for control CQDs.

All-Inorganic Quantum-Dot LEDs Based on a Phase-Stabilized α-CsPbI3 Perovskite.

The all-inorganic nature of CsPbI3 perovskites allows to enhance stability in perovskite devices. Research efforts have led to improved stability of the black phase in CsPbI3 films; however, these strategies-including strain and doping-are based on organic-ligand-capped perovskites, which prevent perovskites from forming the close-packed quantum dot (QD) solids necessary to achieve high charge and thermal transport. We developed an inorganic ligand exchange that leads to CsPbI3 QD films with superior phase stability and increased thermal transport. The atomic-ligand-exchanged QD films, once mechanically coupled, exhibit improved phase stability, and we link this to distributing strain across the film. Operando measurements of the temperature of the LEDs indicate that KI-exchanged QD films exhibit increased thermal transport compared to controls that rely on organic ligands. The LEDs exhibit a maximum EQE of 23 % with an electroluminescence emission centered at 640 nm (FWHM: ≈31 nm). These red LEDs provide an operating half-lifetime of 10 h (luminance of 200 cd m-2 ) and an operating stability that is 6× higher than that of control devices.

Chloride Insertion-Immobilization Enables Bright, Narrowband, and Stable Blue-Emitting Perovskite Diodes.

Metal halide perovskites show promise for light-emitting diodes (LEDs) owing to their facile manufacture and excellent optoelectronic performance, including high color purity and spectral stability, especially in the green region. However, for blue perovskite LEDs, the emission spectrum line width is broadened to over 25 nm by the coexistence of multiple reduced-dimensional perovskite domains, and the spectral stability is poor, with an undesirable shift (over 7 nm) toward longer wavelengths under operating conditions, degradation that occurs due to phase separation when mixed halides are employed. Here we demonstrate chloride insertion-immobilization, a strategy that enables blue perovskite LEDs, the first to exhibit narrowband (line width of 18 nm) and spectrally stable (no wavelength shift) performance. We prepare bromide-based perovskites and then employ organic chlorides for dynamic treatment, inserting and in situ immobilizing chlorides to blue-shift and stabilize the emission. We achieve sky-blue LEDs with a record luminance over 5100 cd/m2 at 489 nm, and an operating half-life of 51 min at 1500 cd/m2. By device structure optimization, we further realize an improved EQE of 5.2% at 479 nm and an operating half-life of 90 min at 100 cd/m2.

Precise Control of Quantum Confinement in Cesium Lead Halide Perovskite Quantum Dots via Thermodynamic Equilibrium.

Cesium lead halide (CsPbX3) nanocrystals have emerged as a new family of materials that can outperform the existing semiconductor nanocrystals due to their superb optical and charge-transport properties. However, the lack of a robust method for producing quantum dots with controlled size and high ensemble uniformity has been one of the major obstacles in exploring the useful properties of excitons in zero-dimensional nanostructures of CsPbX3. Here, we report a new synthesis approach that enables the precise control of the size based on the equilibrium rather than kinetics, producing CsPbX3 quantum dots nearly free of heterogeneous broadening in their exciton luminescence. The high level of size control and ensemble uniformity achieved here will open the door to harnessing the benefits of excitons in CsPbX3 quantum dots for photonic and energy-harvesting applications.

Photoinduced Anion Exchange in Cesium Lead Halide Perovskite Nanocrystals.

Cesium lead halide (CsPbX3) perovskite nanocrystals (NCs) possess the unique capability of post-synthesis anion exchange providing facile tunability of the optical properties, which is usually achieved by mixing NCs with reactive anion precursors. In this work, we show that the controllable anion exchange can be achieved in a dihalomethane solution of CsPbX3 NC in the absence of any spontaneously reacting anion source using photoexcitation of CsPbX3 NCs as the triggering mechanism for the halide ion exchange. The reaction begins with the photoinduced electron transfer from CsPbX3 NCs to dihalomethane solvent molecules producing halide ions via reductive dissociation, which is followed by anion exchange. The reaction proceeds only in the presence of excitation light and the rate and extent of reaction can be controlled by varying the light intensity. Furthermore, the asymptotic extent of reaction under continuous excitation can be controlled by varying the wavelength of light that self-limits the reaction when light becomes off-resonance with the absorption of NCs. The light-controlled anion exchange demonstrated here can be utilized to pattern the post-synthesis chemical transformation of CsPbX3 NCs, not readily achievable using typical methods of anion exchange.

Photoemission of Energetic Hot Electrons Produced via Up-Conversion in Doped Quantum Dots.

The benefits of the hot electrons from semiconductor nanostructures in photocatalysis or photovoltaics result from their higher energy compared to that of the band-edge electrons facilitating the electron-transfer process. The production of high-energy hot electrons usually requires short-wavelength UV or intense multiphoton visible excitation. Here, we show that highly energetic hot electrons capable of above-threshold ionization are produced via exciton-to-hot-carrier up-conversion in Mn-doped quantum dots under weak band gap excitation (∼10 W/cm2) achievable with the concentrated solar radiation. The energy of hot electrons is as high as ∼0.4 eV above the vacuum level, much greater than those observed in other semiconductor or plasmonic metal nanostructures, which are capable of performing energetically and kinetically more-challenging electron transfer. Furthermore, the prospect of generating solvated electron is unique for the energetic hot electrons from up-conversion, which can open a new door for long-range electron transfer beyond short-range interfacial electron transfer.

Exciton-to-Dopant Energy Transfer in Mn-Doped Cesium Lead Halide Perovskite Nanocrystals.

We report the one-pot synthesis of colloidal Mn-doped cesium lead halide (CsPbX3) perovskite nanocrystals and efficient intraparticle energy transfer between the exciton and dopant ions resulting in intense sensitized Mn luminescence. Mn-doped CsPbCl3 and CsPb(Cl/Br)3 nanocrystals maintained the same lattice structure and crystallinity as their undoped counterparts with nearly identical lattice parameters at ∼0.2% doping concentrations and no signature of phase separation. The strong sensitized luminescence from d-d transition of Mn2+ ions upon band-edge excitation of the CsPbX3 host is indicative of sufficiently strong exchange coupling between the charge carriers of the host and dopant d electrons mediating the energy transfer, essential for obtaining unique properties of magnetically doped quantum dots. Highly homogeneous spectral characteristics of Mn luminescence from an ensemble of Mn-doped CsPbX3 nanocrystals and well-defined electron paramagnetic resonance spectra of Mn2+ in host CsPbX3 nanocrystal lattices suggest relatively uniform doping sites, likely from substitutional doping at Pb2+. These observations indicate that CsPbX3 nanocrystals, possessing many superior optical and electronic characteristics, can be utilized as a new platform for magnetically doped quantum dots expanding the range of optical, electronic, and magnetic functionality.

Nonplasmonic Hot-Electron Photocurrents from Mn-Doped Quantum Dots in Photoelectrochemical Cells.

We report the measurement of the hot-electron current in a photoelectrochemical cell constructed from a glass/ITO/Al2 O3 (ITO=indium tin oxide) electrode coated with Mn-doped quantum dots, where hot electrons with a large excess kinetic energy were produced through upconversion of the excitons into hot electron hole pairs under photoexcitation at 3 eV. In our recent study (J. Am. Chem. Soc. 2015, 137, 5549), we demonstrated the generation of hot electrons in Mn-doped II-VI semiconductor quantum dots and their usefulness in photocatalytic H2 production reaction, taking advantage of the more efficient charge transfer of hot electrons compared with band-edge electrons. Here, we show that hot electrons produced in Mn-doped CdS/ZnS quantum dots possess sufficient kinetic energy to overcome the energy barrier from a 5.4-7.5 nm thick Al2 O3 layer producing a hot-electron current in photoelectrochemical cell. This work demonstrates the possibility of harvesting hot electrons not only at the interface of the doped quantum dot surface, but also far away from it, thus taking advantage of the capability of hot electrons for long-range electron transfer across a thick energy barrier.

Hot Electrons Generated from Doped Quantum Dots via Upconversion of Excitons to Hot Charge Carriers for Enhanced Photocatalysis.

We show that hot electrons exhibiting the enhanced photocatalytic activity in H2 production reaction can be efficiently generated in Mn-doped quantum dots via the "upconversion" of the energy of two excitons into the hot charge carriers. The sequential two-photon-induced process with the long-lived Mn excited state serving as the intermediate state is considered as the pathway generating hot electrons. H2 production rate from doped quantum dots is significantly higher than that from undoped quantum dots and also exhibited the quadratic increase with the light intensity, demonstrating the effectiveness of the hot electrons produced in doped quantum dots in photocatalytic reaction. Due to the very long lifetime of Mn excited state (∼6 ms) in the doped quantum dots, the sequential two-photon excitation requires relatively low excitation rates readily achievable with a moderately concentrated solar radiation, demonstrating their potential as an efficient source of hot electrons operating at low excitation intensities.

Ionic current rectification in organic solutions with quartz nanopipettes.

The study of behaviors of ionic current rectification (ICR) in organic solutions with quartz nanopipettes is reported. ICR can be observed even in organic solutions using quartz pipettes with diameters varied from several to dozens of nanometers, and the direction of ICR is quite different from the ICR observed in aqueous phase. The influences of pore size, electrolyte concentration, and surface charge on the ICR have been investigated carefully. Water in organic solutions affects the direction and extent of ICR significantly. Mechanisms about the formation of an electrical double layer (EDL) on silica in organic solutions with different amount of water have been proposed. An improved method, which can be employed to detect trace water in organic solutions, has been implemented based on Au ultramicroelectrodes with cathodic differential pulse stripping voltammetry.

Citric acid crosslinked soluble soybean polysaccharide films for active food packaging applications.

In this work, a nontoxic crosslinking agent, citric acid (CA), was used to crosslink glycerol-plasticized SSPS films via a heat activated reaction. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy results confirmed the occurrence of esterification reaction between CA and SSPS. Microstructure of the CA-crosslinked SSPS films were characterized by scanning electron microscopy, atomic force microscopy and X-ray diffraction. The water resistance, mechanical, UV-barrier, water vapor barrier, antioxidant and thermal properties of SSPS films were enhanced by CA crosslinking. The SSPS film crosslinked with 5 % CA exhibited a maximum tensile strength of 6.5 MPa and a minimum water solubility of 34.3 %. The CA-crosslinked SSPS film also presented superior antibacterial properties against Gram-positive and Gram-negative bacteria. Application test results showed that the CA-crosslinked SSPS film can effectively delay the oxidative deterioration of lard during storage, suggesting that the developed CA-crosslinked SSPS film could be a promising candidate for active food packaging.

Biexciton-like Auger Blinking in Strongly Confined CsPbBr3 Perovskite Quantum Dots.

Perovskite quantum dots (QDs) with high room-temperature luminescence efficiency have been applied in single-photon sources. While the optical properties of large, weakly confined perovskite nanocrystals have been extensively explored at the single-particle level, few studies have focused on single-perovskite QDs with strong quantum confinement. This is mainly due to their poor surface chemical stability. Here we demonstrate that strongly confined CsPbBr3 perovskite QDs (SCPQDs) embedded in a phenethylammonium bromide matrix exhibit a well-passivated surface and improved photostability under intense photoexcitation. We find that in our SCPQDs, photoluminescence blinking is suppressed at moderate excitation intensities, and increasing the excitation rates leads to weak photoluminescence intensity fluctuations accompanied by an unusual spectral blue-shift. We attribute this to a biexciton-like Auger interaction between excitons and trapped excitons formed by surface lattice elastic distortions. This hypothesis is corroborated by the unique repulsive biexciton interaction observed in the SCPQDs.

Studies of ionic current rectification using polyethyleneimines coated glass nanopipettes.

The modification of glass nanopipettes with polyethyleneimines (PEIs) has been successfully achieved by a relatively simple method, and the smallest tip opening is around 3 nm. Thus, in a much wider range of glass pipettes with radii from several nanometers to a few micrometers, the ion current rectification (ICR) phenomenon has been observed. The influences of different KCl concentrations, pH values, and tip radii on the ICR are investigated in detail. The sizes of PEIs have been determined by dynamic light scattering, and the effect of the sizes of PEIs for the modification, especially for a few nanometer-pipettes in radii, is also discussed. These findings systemically confirm and complement the theoretical model and provide a platform for possible selectively molecular detection and mimic biological ion channels.

Identifying Evacuation Needs and Resources Based on Volunteered Geographic Information: A Case of the Rainstorm in July 2021, Zhengzhou, China.

Recently, global climate change has led to a high incidence of extreme weather and natural disasters. How to reduce its impact has become an important topic. However, the studies that both consider the disaster's real-time geographic information and environmental factors in severe rainstorms are still not enough. Volunteered geographic information (VGI) data that was generated during disasters offered possibilities for improving the emergency management abilities of decision-makers and the disaster self-rescue abilities of citizens. Through the case study of the extreme rainstorm disaster in Zhengzhou, China, in July 2021, this paper used machine learning to study VGI issued by residents. The vulnerable people and their demands were identified based on the SOS messages. The importance of various indicators was analyzed by combining open data from socio-economic and built-up environment elements. Potential safe areas with shelter resources in five administrative districts in the disaster-prone central area of Zhengzhou were identified based on these data. This study found that VGI can be a reliable data source for future disaster research. The characteristics of rainstorm hazards were concluded from the perspective of affected people and environmental indicators. The policy recommendations for disaster prevention in the context of public participation were also proposed.