Crystallization-driven one-dimensional self-assembly of polyethylene-b-poly(tert-butylacrylate) diblock copolymers in DMF: effects of crystallization temperature and the corona-forming block.

Crystallization-driven self-assembly of polyethylene-b-poly(tert-butylacrylate) (PE-b-PtBA) block copolymers (BCPs) in N,N-dimethyl formamide (DMF) was studied. It is found that all three PE-b-PtBA BCPs used in this work can self-assemble into one-dimensional crystalline cylindrical micelles. When the BCP solution is cooled to crystallization temperature (Tc) from 130 °C, the seed micelles may be produced via two competitive processes in the initial period: stepwise micellization/crystallization and simultaneous crystallization/micellization. Subsequently, the seed micelles can undergo growth driven by the epitaxial crystallization of the unimers. The lengths of both the seed micelles and the grown micelles are longer for the BCP with a longer PtBA block at a higher Tc. Quasi-living growth of the PE-b-PtBA crystalline cylindrical micelles is achieved at a higher Tc. A longer PtBA block evidently retards the attachment of unimers to the crystalline micelles, leading to a slower growth rate.

Synthesis of an Amphiphilic Brush Copolymer by a Highly Efficient "Grafting onto" Approach via CO2 Chemistry.

A novel and robust route for the synthesis of a new amphiphilic brush copolymer, poly(glycidyl methacrylate)-graft-polyethylene glycol (PGMA-g-PEG), with high grafting densities of 97%-98% through a "grafting onto" method via carbon dioxide chemistry is reported. PGMA-g-PEG can self-assemble and form stable spherical core-shell micelles in aqueous solution. Besides, the obtained PGMA-g-PEG polymer contains hydroxyurethane structures as the junction sites between the PGMA backbone and PEG side chain, which can be used for further modification.

Effect of local chain deformability on the temperature-induced morphological transitions of polystyrene-b-poly(N-isopropylacrylamide) micelles in aqueous solution.

The effect of temperature on the micellar morphology of two polystyrene-b-poly(N-isopropylacrylamide) (PS-b-PNIPAM) diblock copolymers in an aqueous solution was investigated by dynamic light scattering (DLS) and transmission electron microscopy (TEM). At 25 °C, a mixture of vesicles and spheres are observed for the micelles of PS65-b-PNIPAM108, while PS65-b-PNIPAM360 exhibits mixed cylindrical and spherical micellar morphology. Upon increasing the temperature, the micellar morphology becomes spherical for PS65-b-PNIPAM108 at 60 °C and for PS65-b-PNIPAM360 at 40 °C. Such vesicle-to-sphere and cylinder-to-sphere transitions of micellar morphology are reversible when the micellar solutions are cooled back to 25 °C. However, these temperature-induced morphological transitions of the PS-b-PNIPAM micelles are contrary to the theoretical prediction. Qualitative analysis of the free energy shows that vesicular or cylindrical micelles tend to form at higher temperatures if only the overall volume change of the PNIPAM block is considered. The contradiction between the experimental results and theoretical prediction is interpreted in terms of the local deformability of the PNIPAM chains. At elevated temperatures, the collapsed PNIPAM globules are less deformable and must occupy larger areas at the micellar interface, although the overall volume is smaller at higher temperatures. This will lead to a larger repulsion between the PNIPAM globules and a remarkable increase in the free energy of the corona; thus, the formation of vesicles or cylinders at higher temperatures is prohibited.

Fabrication of High χ-Low N Block Copolymers with Thermally Stable Sub-5 nm Microdomains Using Polyzwitterion as a Constituent Block.

In this work, we used zwitterionic poly(4-vinylpyridine) propane-1-sulfonate (PVPS) as a constituent block to construct high χ-low N block copolymers (BCPs) with different neutral polymers as the other block, including polystyrene (PS), poly(ethylene oxide) (PEO), and poly(l-lactide) (PLLA). Lamellar structures with sub-5 nm microdomains were observed in all three types of BCPs. Due to the tendency of self-aggregation induced by electrostatic interaction in polyzwitterion, the Flory-Huggins parameters (χ) between PVPS and most neutral polymers are relatively high, which provides a facile and efficient way to fabricate high χ-low N BCPs. In addition, the dimension of the sub-5 nm structures formed in PVPS-containing BCPs showed high thermal stability with a small fluctuation (±0.1 nm) of domain spacings upon heating.

Preparation and characterization of V-shaped PS-b-PEO brushes anchored on planar gold substrate through the trithiocarbonate junction group.

Trithiocarbonate group was introduced into the polystyrene-b-poly(ethylene oxide) (PS-b-PEO) block copolymers as the junction of the blocks through RAFT polymerization. Mixed PS and PEO brushes with a V-shape were prepared by anchoring the trithiocarbonate group on the planar gold substrate. The morphology of the V-shaped brushes was characterized by atomic force microscopy (AFM) and the surface composition responsive to solvent treatment was detected by X-ray photoelectron spectroscopy (XPS). Different morphologies were observed for the V-shaped PS-b-PEO brushes, depending on the chain structure and solvent treatment. The highly selective solvent for PEO, ethanol, can intensify or induce microphase separation of the V-shaped brushes, leading to vertical microphase separation. When the V-shaped brushes are treated with the co-solvent, THF, miscible morphology, lateral microphase separation, and vertical microphase separation are observed as the PS block length increases. After treatment with the non-selective poor solvent, cyclohexane, the V-shaped PS(106)-b-PEO(113) brush, exhibits a laterally microphase-separated morphology, but the V-shaped PS(52)-b-PEO(113) and PS(253)-b-PEO(113) brushes are vertically microphase-separated.

Facile fabrication of amphiphilic gold nanoparticles with V-shaped brushes from block copolymers with a trithiocarbonate group as the junction.

Amphiphilic gold nanoparticles grafted with V-shaped brushes (Au-V-brushes) were prepared by grafting a polystyrene-b-poly(ethylene oxide) (PS-b-PEO) block copolymer with a trithiocarbonate group as the junction to the Au surface. The obtained Au-V-brushes were subjected to solubility test and UV-vis, FT-IR, TEM and DLS characterizations. It is found that the Au-V-brushes are soluble in both water and organic solvents. In the common solvent DMF, the size of the Au-V-brushes is about 17 nm, whereas in selective solvents (toluene and water) aggregates of 70-90 nm are formed. Phase transfer of the Au-V-brushes from the water phase into the toluene phase occurs upon addition of Na(2)SO(4) into water and the Au-V-brushes can also transfer from the toluene phase to the interface of toluene and water phases after addition of citric acid in the water phase.

Morphological change of asymmetric oxyethylene/oxybutylene block copolymers induced by montmorillonite.

Two oxyethylene/oxybutylene block copolymers (E(40)B(79) and E(47)B(62)), which exhibit body-centered cubic sphere (bcc) and hexagonally packed cylindrical (hex) melt morphologies in bulk, respectively, were blended with nanoclay of montmorillonite (MMT). The effects of MMT on the morphology and crystallization of E(40)B(79) and E(47)B(62) were studied with small-angle x-ray scattering, wide-angle x-ray diffraction, and differential scanning calorimeter. It is found that the E block in the block copolymers can intercalate into the galleries of MMT, leading to a larger layer spacing than that of neat MMT. The preferential absorption of the E block onto MMT plates induces the formation of a new lamellar structure, irrespectively of original morphology in the bulk. There is, however, coexistence of the new lamellar structure with regions retaining the melt morphology. The order-disorder transition temperature (T(ODT)) of the block copolymer is increased by MMT for E(40)B(79), but it remains unchanged for E(47)B(62). Crystallinity of the block copolymers is also greatly suppressed by the addition of MMT.