High-Sensitivity Photoelectrochemical Ultraviolet Photodetector with Stable pH-Universal Adaptability Based on Whole Single-Crystal Integrated Self-Supporting 4H-SiC Nanoarrays.

Emerging photoelectrochemical (PEC) photodetectors (PDs) have notable advantages over conventional PDs and have attracted extensive attention. However, harsh liquid environments, such as those with high corrosivity and attenuation, substantially restrict their widespread application. Moreover, most PEC PDs are constructed by assembling numerous nanostructures on current collector substrates, which inevitably contain abundant interfaces and defects, thus greatly weakening the properties of PDs. To address these challenges, a high-performance pH-universal PEC ultraviolet (UV) PD based on a whole single-crystal integrated self-supporting 4H-SiC nanopore array photoelectrode is constructed, which is fabricated using a two-step anodic oxidation approach. The PD exhibits excellent photodetection behavior, with high responsivity (218.77 mA W-1), detectivity (6.64 × 1013 Jones), external quantum efficiency (72.47%), and rapid rise/decay times (17/48 ms) under 375 nm light illumination with a low intensity of 0.15 mW cm-2 and a bias voltage of 0.6 V, which is fall in the state-of-the-art of the wide-bandgap semiconductor-based PDs reported thus far. Furthermore, the SiC PEC PD exhibits excellent photoresponse and long-term operational stability in pH-universal liquid environments. The improved photodetection performance of the SiC PEC PD is primarily attributed to the synergistic effect of the nanopore array structure, integrated self-supporting configuration, and single-crystal structure of the whole photoelectrode.

Reducing Emission Linewidth of Pure-Blue ZnSeTe Quantum Dots through Shell Engineering toward High Color Purity Light-Emitting Diodes.

High color purity blue quantum dot light-emitting diodes (QLEDs) have great potential applications in the field of ultra-high-definition display. However, the realization of eco-friendly pure-blue QLEDs with a narrow emission linewidth for high color purity remains a significant challenge. Herein, a strategy for fabricating high color purity and efficient pure-blue QLEDs based on ZnSeTe/ZnSe/ZnS quantum dots (QDs) is presented. It is found that by finely controlling the internal ZnSe shell thickness of the QDs, the emission linewidth can be narrowed by reducing the exciton-longitudinal optical phonon coupling and trap states in the QDs. Additionally, the regulation of the QD shell thickness can suppress the Förster energy transfer between QDs in the QLED emission layer, which will help to reduce the emission linewidth of the device. As a result, the fabricated pure-blue (452 nm) ZnSeTe QLED with ultra-narrow electroluminescence linewidth (22 nm) exhibit high color purity with the Commission Internationale de l'Eclairage chromatic coordinates of (0.148, 0.042) and considerable external quantum efficiency (18%). This work provides a demonstration of the preparation of pure-blue eco-friendly QLEDs with both high color purity and efficiency, and it is believed that it will accelerate the application process of eco-friendly QLEDs in ultra-high-definition displays.

CsPbI3 Nanotube Photodetectors with High Detectivity.

In the present work, the exploration of photodetectors (PDs) based on CsPbI3 nanotubes are reported. The as-prepared CsPbI3 nanotubes can be stable for more than 2 months under air conditions. It is found that, in comparison to the nanowires, nanobelts, and nanosheets, the nanotubes can be advantageous to be used as the functional units for PDs, which is mainly attributed to the enhanced light absorption ability induced by the light trapping effect within the tube cavity. As a proof of concept, the as-constructed PDs based on CsPbI3 nanotube present an overall excellent performance with a responsivity (Rλ ), external quantum efficiency (EQE) and detectivity of 1.84 × 103 A W-1 , 5.65 × 105 % and 9.99 × 1013 Jones, respectively, which are all comparable to state-of-the-art ones for all-inorganic perovskite PDs.

Ultrastable Photodetectors Based on Blue CsPbBr3 Perovskite Nanoplatelets via a Surface Engineering Strategy.

Recently, photodetectors based on perovskite nanoplatelets (NPLs) have attracted considerable attention in the visible spectral region owing to their large absorption cross-section, high exciton binding energy, excellent charge transfer properties, and appropriate flexibility. However, their stability and performance are still challenging for perovskite NPL photodetectors. Here, a surface engineering strategy to enhance the optical stability of blue-light CsPbBr3 NPLs by acetylenedicarboxylic acid (ATDA) treatment has been developed. ATDA has strong binding capacity and a short chain length, which can effectively passivate defects and significantly improve the photoluminescence quantum efficiency, stability, and carrier mobility of NPLs. As a result, ATDA-treated CsPbBr3 NPLs exhibit improved optical properties in both solutions and films. The NPL solution maintains high PL performance even after being heated at 80 °C for 2 h, and the NPL film remains nondegradable after 4 h of exposure to ultraviolet irradiation. Especially, photodetectors based on the treated CsPbBr3 NPL films demonstrate exceptional performance, especially when the detectivity approaches up to 9.36 × 1012 Jones, which can be comparable to the best CsPbBr3 NPL photodetectors ever reported. More importantly, the assembled devices demonstrated high stability (stored in an air environment for more than 30 days), significantly exceeding that of untreated NPLs.

Realizing efficient broadband near-infrared emission and multimode photoluminescence switching via coordination structure modulation in Sb3+-doped 0D organic metal chlorides.

Recently, organic Sb(III)-based metal halides have achieved significant results in the visible light region due to their efficient emission. However, realizing efficient broadband near-infrared (NIR) emission in such materials is a great challenge. Herein, we developed three different NIR emitters via a coordination structure modulation strategy in Sb3+-doped zero-dimensional organic metal chlorides of (C20H20P)2MnCl4, (C20H20P)2ZnCl4, and (C20H20P)2CdCl4 with tetrahedral structure. More specifically, after the dopant Sb3+ is inserted into the host lattice, the coordination structures of Sb3+ ions can change from [SbCl5]2- square-pyramidal configuration to [SbCl4]- clusters, which will bring a larger lattice distortion degree to the excited state compared to the ground state, resulting in a larger Stokes shift. Thus, efficient NIR emission with near-unity photoluminescence quantum yield (PLQY) can be obtained in Sb3+-doped compounds under 365 nm excitation. Moreover, Sb3+-doped NIR emitters also show remarkable stabilities, which prompts us to fabricate NIR phosphor conversion light-emitting diodes (pc-LEDs) and demonstrate their application in night vision. More interestingly, the Sb3+-doped (C20H20P)2MnCl4 shows tunable emission characteristics, which can be tuned from green to greenish-yellow, orange, red, and NIR emission under different external stimuli, and thus we can demonstrate the applications of this compound in quintuple-mode fluorescence anti-counterfeiting and information encryption.

Dimethyl Ferrocene-Induced Ambient-Processed High-Quality Films toward Efficient Perovskite Solar Cells for Industrial Application.

Metal halide perovskite solar cells (PSCs) have recently made significant progress with power conversion efficiencies (PCEs) boosted from 3.8% to a certified one over 26.1%, partially benefiting from the high-quality perovskite film enabled by the effective one-step spin-coating route. However, an extra antisolvent step with poor controllability and producibility is often involved in such a process, and some intrinsic defects are generated inevitably, especially in ambient atmospheric conditions, thus fundamentally limiting the commercialization of PSCs. Here, we introduce 1,1'dimethyl ferrocene into methylammonium lead halide precursor, which could not only recover the defects within perovskite film but also simplify the process without the extra antisolvent step. Accordingly, a dense and uniform perovskite film with large grains has been obtained under ambient conditions, which has much lower defect density, better stability against moisture penetration, and enhanced thermal tolerance than the control one, delivering a champion PCE of 16.92%. Current work sheds light on the simplified air-processed strategy for high-quality perovskite films, which might pave the way for exploring efficient and stable PSCs toward industrial applications.

Heterojunction Engineering Enhanced Self-Polarization of PVDF/CsPbBr3 /Ti3 C2 Tx Composite Fiber for Ultra-High Voltage Piezoelectric Nanogenerator.

Piezoelectric nanogenerator (PENG) for practical application is constrained by low output and difficult polarization. In this work, a kind of flexible PENG with high output and self-polarization is fabricated by constructing CsPbBr3 -Ti3 C2 Tx heterojunctions in PVDF fiber. The polarized charges rapidly migrate to the electrodes from the Ti3 C2 Tx nanosheets by forming heterojunctions, achieving the maximum utilization of polarized charges and leading to enhanced piezoelectric output macroscopically. Optimally, PVDF/4wt%CsPbBr3 /0.6wt%Ti3 C2 Tx -PENG exhibits an excellent voltage output of 160 V under self-polarization conditions, which is higher than other self-polarized PENG previously. Further, the working principle and self-polarization mechanism are uncovered by calculating the interfacial charge and electric field using first-principles calculation. In addition, PVDF/4wt%CsPbBr3 /0.6wt%Ti3 C2 Tx -PENG exhibits better water and thermal stability attributed to the protection of PVDF. It is also evaluated in practice by harvesting the energy from human palm taps and successfully lighting up 150 LEDs and an electronic watch. This work presents a new idea of design for high-performance self-polarization PENG.

FeNi LDH/V2CTx/NF as Self-Supported Bifunctional Electrocatalyst for Highly Effective Overall Water Splitting.

The development of bifunctional electrocatalysts with efficient oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is still a key challenge at the current stage. Herein, FeNi LDH/V2CTx/nickel foam (NF) self-supported bifunctional electrode was prepared via deposition of FeNi LDH on V2CTx/NF substrate by hydrothermal method. Strong interfacial interaction between V2CTx/NF and FeNi LDH effectively prevented the aggregation of FeNi LDH, thus exposing more catalytic active sites, which improved electrical conductivity of the nanohybrids and structural stability. The results indicated that the prepared FeNi LDH/V2CTx/NF required 222 mV and 151 mV overpotential for OER and HER in 1 M KOH to provide 10 mA cm-2, respectively. Besides, the FeNi LDH/V2CTx/NF electrocatalysts were applied to overall water splitting, which achieved a current density of 10 mA cm-2 at 1.74 V. This work provides ideas for improving the electrocatalytic performance of electrocatalysts through simple synthesis strategies, structural adjustment, use of conductive substrates and formation of hierarchical structures.

Enhancing the Stability of Orthorhombic CsSnI3 Perovskite via Oriented π-Conjugated Ligand Passivation.

Lead-free orthorhombic CsSnI3 (Bγ-CsSnI3) perovskite has been emerging as one of the potential candidates of photovoltaic materials with superior performance. However, the instability induced by rapid reconstructive phase transition and the oxidation of Sn2+ greatly limits their future application. We thus reported a strategy, oriented π-conjugated ligand passivation, for enhancing the stability of Bγ-CsSnI3, simulated using a Bγ-CsSnI3 slab model based on the first-principles computation. The phase stability was found to be strongly dependent on the orientations of phenylethylammonium (PEA+) ligands. The passivated Bγ-CsSnI3 slab with the ligand molecule axis along [414] was demonstrated as the most stable with the lowest adsorption energy (Eads). Based on this configuration, the calculated formation energies (Eform) of half- and full-monolayer coverage were even more negative than that of yellow phase (Y-) CsSnI3 passivated by PEA+ ligands, verifying the enhanced phase stability. Furthermore, the surface states could be effectively suppressed and the downshifted conduction band minimum (CBM) resulted in a reduced band gap for the completely capped Bγ-CsSnI3. Moreover, the CBM and the valence band maximum (VBM) of the system with complete coverage were respectively donated by the surface and bulky components of the slab, which might benefit the separation and transfer of photogenerated carriers.

Enhanced Piezoresistive Behavior of SiC Nanowire by Coupling with Piezoelectric Effect.

Improving the sensitivity of the piezoresistive behavior of semiconductor nanostructures is critically important because it is one of the keys to explore advanced pressure sensors with desired sensitivity. Herein, we reported a strategy for improving the piezoresistive behavior of SiC nanowire by coupling with the piezoelectric effect of ZnO nanolayers, which were grown by an atomic layer deposition approach. As a result, the detected current of the as-constructed ZnO/SiC heterojunction nanowires is 6 times more than SiC nanowires, suggesting its substantially improved sensitivity. Moreover, the measured ΔR/R0 value and gauge factor (GF) of the ZnO/SiC heterojunction nanowires could be up to 0.82 and 50.93, respectively, which was profoundly higher than those of the SiC counterpart and most of reported positive piezoresistive SiC sensors.

Superior Photodetectors Based on All-Inorganic Perovskite CsPbI3 Nanorods with Ultrafast Response and High Stability.

Currently, one-dimensional all-inorganic CsPbX3 (X = Br, Cl, and I) perovskites have attracted great attention, owning to their promising and exciting applications in optoelectronic devices. Herein, we reported the exploration of superior photodetectors (PDs) based on a single CsPbI3 nanorod. The as-constructed PDs had a totally excellent performance with a responsivity of 2.92 × 103 A·W-1 and an ultrafast response time of 0.05 ms, respectively, which were both comparable to the best ones ever reported for all-inorganic perovskite PDs. Furthermore, the detectivity of the PDs approached up to 5.17 × 1013 Jones, which was more than 5 times the best one ever reported. More importantly, the as-constructed PDs showed a high stability when maintained under ambient conditions.