RESUMO
OBJECTIVES: To determine the feasibility of automated co-registration of angiography and intravascular ultrasound (IVUS) to facilitate integration of these two imaging modalities in a synchronous manner. BACKGROUND: IVUS provides cross-sectional imaging of coronary arteries but lacks overview of the vascular territory provided by angiography. Co-registration of angiography and IVUS would increase utility of IVUS in the clinical setting. METHODS: Forty-nine consecutive patients undergoing surveillance for cardiac allograft vasculopathy with angiography and IVUS of the left anterior descending artery (LAD) were enrolled. A pre-IVUS angiogram of the LAD was performed followed by an ECG-triggered fluoroscopy (ECGTF) during IVUS pullback at 0.5 mm/s using an automatic pullback device. ECGTF was used to track the IVUS catheter during pullback and establish a spatial relationship to the pre-IVUS angiogram. Angio-IVUS co-registration was performed with a research prototype (Siemens Healthcare, Germany) and accuracy was evaluated by distance mismatch between angiography and IVUS images at vessel bifurcations. RESULTS: Median age was 54 (44.5, 67) years. The population was 82.6% male with minimal risk factors. The median (IQR) co-registration distance mismatch measured at 108 bifurcations in 42 (85%) patients was 0.35 (0.00-1.16) mm. Seven patients were excluded due to inappropriate data acquisition (n = 3) and failure of tracking (n = 4), e.g., due to overlapping sternal wires. Estimated effective radiation dose for ECGTF was 0.09 mSv. CONCLUSION: This study demonstrates the feasibility of angio-IVUS co-registration which may be used as a clinical tool for localizing IVUS cross-sections along an angiographic roadmap. © 2015 Wiley Periodicals, Inc.
Assuntos
Angiografia Coronária , Doença da Artéria Coronariana/diagnóstico por imagem , Vasos Coronários/diagnóstico por imagem , Imagem Multimodal/métodos , Interpretação de Imagem Radiográfica Assistida por Computador , Ultrassonografia de Intervenção , Adulto , Idoso , Automação , Doença da Artéria Coronariana/etiologia , Estudos de Viabilidade , Feminino , Transplante de Coração/efeitos adversos , Humanos , Masculino , Pessoa de Meia-Idade , Valor Preditivo dos Testes , Doses de Radiação , Exposição à RadiaçãoRESUMO
In image-guided cardiac interventions, X-ray imaging and intravascular ultrasound (IVUS) imaging are two often used modalities. Interventional X-ray images, including angiography and fluoroscopy, are used to assess the lumen of the coronary arteries and to monitor devices in real time. IVUS provides rich intravascular information, such as vessel wall composition, plaque, and stent expansions, but lacks spatial orientations. Since the two imaging modalities are complementary to each other, it is highly desirable to co-register the two modalities to provide a comprehensive picture of the coronaries for interventional cardiologists. In this paper, we present a solution for co-registering 2-D angiography and IVUS through image-based device tracking. The presented framework includes learning-based vessel detection and device detections, model-based tracking, and geodesic distance-based registration. The system first interactively detects the coronary branch under investigation in a reference angiography image. During the pullback of the IVUS transducers, the system acquires both ECG-triggered fluoroscopy and IVUS images, and automatically tracks the position of the medical devices in fluoroscopy. The localization of tracked IVUS transducers and guiding catheter tips is used to associate an IVUS imaging plane to a corresponding location on the vessel branch under investigation. The presented image-based solution can be conveniently integrated into existing cardiology workflow. The system is validated with a set of clinical cases, and achieves good accuracy and robustness.
RESUMO
The accurate and robust tracking of catheters and transducers employed during image-guided coronary intervention is critical to improve the clinical workflow and procedure outcome. Image-based device detection and tracking methods are preferred due to the straightforward integration into existing medical equipments. In this paper, we present a novel computational framework for image-based device detection and tracking applied to the co-registration of angiography and intravascular ultrasound (IVUS), two modalities commonly used in interventional cardiology. The proposed system includes learning-based detections, model-based tracking, and registration using the geodesic distance. The system receives as input the selection of the coronary branch under investigation in a reference angiography image. During the subsequent pullback of the IVUS transducers, the system automatically tracks the position of the medical devices, including the IVUS transducers and guiding catheter tips, under fluoroscopy imaging. The localization of IVUS transducers and guiding catheter tips is used to continuously associate an IVUS imaging plane to the vessel branch under investigation. We validated the system on a set of 65 clinical cases, with high accuracy (mean errors less than 1.5mm) and robustness (98.46% success rate). To our knowledge, this is the first reported system able to automatically establish a robust correspondence between the angiography and IVUS images, thus providing clinicians with a comprehensive view of the coronaries.
Assuntos
Angiografia/métodos , Processamento de Imagem Assistida por Computador/métodos , Ultrassonografia de Intervenção/métodos , Angiografia/instrumentação , Automação , Teorema de Bayes , Cateterismo , Catéteres , Fluoroscopia/métodos , Humanos , Modelos Estatísticos , Probabilidade , Reprodutibilidade dos Testes , Fatores de Tempo , Tomografia/métodos , Transdutores , Ultrassonografia de Intervenção/instrumentaçãoRESUMO
Recently, model-based methods for the automatic segmentation of the heart chambers have been proposed. An important application of these methods is the characterization of the heart function. Heart models are, however, increasingly used for interventional guidance making it necessary to also extract the attached great vessels. It is, for instance, important to extract the left atrium and the proximal part of the pulmonary veins to support guidance of ablation procedures for atrial fibrillation treatment. For cardiac resynchronization therapy, a heart model including the coronary sinus is needed. We present a heart model comprising the four heart chambers and the attached great vessels. By assigning individual linear transformations to the heart chambers and to short tubular segments building the great vessels, variable sizes of the heart chambers and bending of the vessels can be described in a consistent way. A configurable algorithmic framework that we call adaptation engine matches the heart model automatically to cardiac CT angiography images in a multi-stage process. First, the heart is detected using a Generalized Hough Transformation. Subsequently, the heart chambers are adapted. This stage uses parametric as well as deformable mesh adaptation techniques. In the final stage, segments of the large vascular structures are successively activated and adapted. To optimize the computational performance, the adaptation engine can vary the mesh resolution and freeze already adapted mesh parts. The data used for validation were independent from the data used for model-building. Ground truth segmentations were generated for 37 CT data sets reconstructed at several cardiac phases from 17 patients. Segmentation errors were assessed for anatomical sub-structures resulting in a mean surface-to-surface error ranging 0.50-0.82mm for the heart chambers and 0.60-1.32mm for the parts of the great vessels visible in the images.
Assuntos
Aorta Torácica/diagnóstico por imagem , Aorta Torácica/efeitos da radiação , Simulação por Computador , Coração/diagnóstico por imagem , Processamento de Imagem Assistida por Computador , Artéria Pulmonar/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Veias Cavas/diagnóstico por imagem , Seio Coronário/diagnóstico por imagem , Humanos , Veias Pulmonares/diagnóstico por imagemRESUMO
Since the introduction of 3-D rotational X-ray imaging, protocols for 3-D rotational coronary artery imaging have become widely available in routine clinical practice. Intra-procedural cardiac imaging in a computed tomography (CT)-like fashion has been particularly compelling due to the reduction of clinical overhead and ability to characterize anatomy at the time of intervention. We previously introduced a clinically feasible approach for imaging the left atrium and pulmonary veins (LAPVs) with short contrast bolus injections and scan times of approximately 4 -10 s. The resulting data have sufficient image quality for intra-procedural use during electro-anatomic mapping (EAM) and interventional guidance in atrial fibrillation (AF) ablation procedures. In this paper, we present a novel technique to intra-procedural surface generation which integrates fully-automated segmentation of the LAPVs for guidance in AF ablation interventions. Contrast-enhanced rotational X-ray angiography (3-D RA) acquisitions in combination with filtered-back-projection-based reconstruction allows for volumetric interrogation of LAPV anatomy in near-real-time. An automatic model-based segmentation algorithm allows for fast and accurate LAPV mesh generation despite the challenges posed by image quality; relative to pre-procedural cardiac CT/MR, 3-D RA images suffer from more artifacts and reduced signal-to-noise. We validate our integrated method by comparing 1) automatic and manual segmentations of intra-procedural 3-D RA data, 2) automatic segmentations of intra-procedural 3-D RA and pre-procedural CT/MR data, and 3) intra-procedural EAM point cloud data with automatic segmentations of 3-D RA and CT/MR data. Our validation results for automatically segmented intra-procedural 3-D RA data show average segmentation errors of 1) approximately 1.3 mm compared with manual 3-D RA segmentations 2) approximately 2.3 mm compared with automatic segmentation of pre-procedural CT/MR data and 3) approximately 2.1 mm compared with registered intra-procedural EAM point clouds. The overall experiments indicate that LAPV surfaces can be automatically segmented intra-procedurally from 3-D RA data with comparable quality relative to meshes derived from pre-procedural CT/MR.
Assuntos
Fibrilação Atrial/terapia , Ablação por Cateter/métodos , Angiografia Coronária/métodos , Processamento de Imagem Assistida por Computador/métodos , Intensificação de Imagem Radiográfica/métodos , Radiografia Intervencionista/métodos , Átrios do Coração/diagnóstico por imagem , Humanos , Imageamento Tridimensional , Imageamento por Ressonância Magnética/métodos , Veias Pulmonares/diagnóstico por imagem , Interpretação de Imagem Radiográfica Assistida por Computador/métodos , Reprodutibilidade dos Testes , Tomografia Computadorizada por Raios X/métodosRESUMO
Pre-procedural imaging with cardiac CT or MR has become popular for guiding complex electrophysiology procedures such as those used for atrial fibrillation ablation therapy. Electroanatomical mapping and ablation within the left atrium and pulmonary veins (LAPV) is facilitated using such data, however the pre-procedural anatomy can be quite different from that at the time of intervention. Recently, a method for intra-procedural LAPV imaging has been developed based on contrast-enhanced 3-D rotational X-ray angiography (3-D RA). These intraprocedural data now create a compelling need for rapid and automated extraction of the LAPV geometry for catheter guidance. We present a new approach to automatic intra-procedural generation of LAPV surfaces from 3-D RA volumes. Using model-based segmentation, our technique is robust to imaging noise and artifacts typical of 3-D RA imaging, strongly minimizes the user interaction time required for segmentation, and eliminates inter-subject variability. Our findings in 33 patients indicate that intra-procedural LAPV surface models accurately represent the anatomy at the time of intervention and are comparable to pre-procedural models derived from CTA or MRA.
Assuntos
Angiografia/métodos , Átrios do Coração/diagnóstico por imagem , Imageamento Tridimensional/métodos , Modelos Anatômicos , Modelos Cardiovasculares , Veias Pulmonares/diagnóstico por imagem , Radiografia Intervencionista/métodos , Algoritmos , Simulação por Computador , Átrios do Coração/cirurgia , Humanos , Veias Pulmonares/cirurgia , Intensificação de Imagem Radiográfica/métodos , Interpretação de Imagem Radiográfica Assistida por Computador/métodos , Reprodutibilidade dos Testes , Rotação , Sensibilidade e EspecificidadeRESUMO
Automatic image processing methods are a prerequisite to efficiently analyze the large amount of image data produced by computed tomography (CT) scanners during cardiac exams. This paper introduces a model-based approach for the fully automatic segmentation of the whole heart (four chambers, myocardium, and great vessels) from 3-D CT images. Model adaptation is done by progressively increasing the degrees-of-freedom of the allowed deformations. This improves convergence as well as segmentation accuracy. The heart is first localized in the image using a 3-D implementation of the generalized Hough transform. Pose misalignment is corrected by matching the model to the image making use of a global similarity transformation. The complex initialization of the multicompartment mesh is then addressed by assigning an affine transformation to each anatomical region of the model. Finally, a deformable adaptation is performed to accurately match the boundaries of the patient's anatomy. A mean surface-to-surface error of 0.82 mm was measured in a leave-one-out quantitative validation carried out on 28 images. Moreover, the piecewise affine transformation introduced for mesh initialization and adaptation shows better interphase and interpatient shape variability characterization than commonly used principal component analysis.
Assuntos
Algoritmos , Inteligência Artificial , Coração/diagnóstico por imagem , Interpretação de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Reconhecimento Automatizado de Padrão/métodos , Tomografia Computadorizada por Raios X/métodos , Simulação por Computador , Humanos , Aumento da Imagem/métodos , Modelos Anatômicos , Modelos Cardiovasculares , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
We present a fully automatic segmentation algorithm for the whole heart (four chambers, left ventricular myocardium and trunks of the aorta, the pulmonary artery and the pulmonary veins) in cardiac MR image volumes with nearly isotropic voxel resolution, based on shape-constrained deformable models. After automatic model initialization and reorientation to the cardiac axes, we apply a multi-stage adaptation scheme with progressively increasing degrees of freedom. Particular attention is paid to the calibration of the MR image intensities. Detailed evaluation results for the various anatomical heart regions are presented on a database of 42 patients. On calibrated images, we obtain an average segmentation error of 0.76mm.